Hello, We are encountering an issue with Apple Pay on the Web in the sandbox environment where payments cannot be completed because the onpaymentauthorized event is not triggered. The same implementation was working normally until March 5, but the issue started occurring consistently from March 6 without any changes to our code, certificates, or merchant configuration. Environment Apple Pay on the Web (JavaScript) Safari (iOS / macOS) Apple Pay Sandbox Merchant domain verified Merchant validation succeeds Observed Flow The Apple Pay flow proceeds normally until authentication: User clicks the Apple Pay button ApplePaySession.begin() is called onvalidatemerchant fires Merchant validation request succeeds completeMerchantValidation() is called Apple Pay sheet is displayed User authenticates with Face ID / Touch ID onpaymentauthorized is never triggered Because this event never fires, the payment token is not returned and the payment cannot proceed. ApplePaySession Request { "countryCode": "JP", "currencyCode": "JPY", "merchantCapabilities": ["supports3DS"], "supportedNetworks": ["visa", "masterCard"], "total": { "label": "Test Payment", "type": "final", "amount": "100" } } Merchant Validation Merchant validation succeeds and returns a valid session from Apple. Relevant fields from the merchant session: merchantIdentifier: 35A786BE6AB4... domainName: secure.telecom-awstest.com displayName: ApplePay Additional Notes Apple Pay sheet appears normally Authentication completes successfully No JavaScript errors are logged onpaymentauthorized is never fired Issue occurs consistently in the sandbox environment Confirmed across multiple iOS versions Question Has anyone experienced a similar issue recently in the Apple Pay sandbox environment, or are there any known changes that could cause the onpaymentauthorized event not to fire after authentication? Any insights would be greatly appreciated. Thank you.

Hello. I have a few questions about the implementation of Apple Pay payments on websites. Could you help me From the documentation: Apple Pay issues an Apple Pay Merchant Token if the user’s payment network supports merchant-specific payment tokens. Otherwise, Apple Pay issues a device token for the payment request. How can we determine whether a token is a merchant token or a device token? Is it possible to determine this by any of the token fields? https://developer.apple.com/documentation/passkit/payment-token-format-reference Is it possible to understand this in other ways? Can I make recurring payments with the device token if it was issued instead of the merchant token? Is it necessary to include the tokenNotificationURL when generating a merchant token, or can we generate one without specifying it? What does the applicationExpirationDate field in the merchant token represent? Is this the date when the device token or merchant token expires and payments cannot be made with it?

Hi, To ensure the issue is not caused by an error within your app or web service request, please review the Apple Pay Merchant Integration Guide. Additionally, please review the following technotes on Apple Pay: TN3173: Troubleshooting issues with your Apple Pay merchant identifier configuration TN3174: Diagnosing issues with the Apple Pay payment sheet on your website TN3175: Diagnosing issues with displaying the Apple Pay button on your website TN3176: Troubleshooting Apple Pay payment processing issues TN3206: Updating Apple Pay certificates If the resources above don’t help identify the cause of the error, please provide more information about your app or web services to get started. To prevent sending sensitive credentials in plain text, create a report in Feedback Assistant to share the details requested below. Additionally, if the error is something we need to investigate further, the appropriate engineering teams also have access to the same information and can communicate with you directly within Feedback Assistant for more information, as needed. Please follow the instructions below to submit your report. For issues occurring with your native app or web service, perform the following steps: Install the Apple Pay profile on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp of when the issue was reproduced. Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or merchant domain in the Safari Web Inspector. See Inspecting Safari on macOS to learn more. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay website. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your web implementation, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Hello everyone, We've encountered a blocking issue while integrating Apple Pay on the Web within a Salesforce Commerce Cloud (SFCC) environment. The session fails immediately after a successful user authentication. Problem Summary: After a user authenticates a payment with Touch ID or Face ID, the Apple Pay sheet showing error "Payment not completed" message. The core of the issue is that the onpaymentauthorized event handler is never invoked in our client-side JavaScript. As a result, the corresponding server-side SFCC paymentAuthorized hooks are never triggered, and we cannot obtain a payment token to complete the transaction. Also, No console logs are observed. Observed Flow of Events: The ApplePaySession proceeds correctly through the initial callbacks. We have verified through server-side logs that the corresponding SFCC platform hooks (getRequest, prepareBasket, shippingContactSelected, shippingMethodSelected) fire and complete successfully. The payment sheet correctly updates with shipping costs and the final transaction amount. Failure Point & Steps to Reproduce: A user initiates an Apple Pay transaction within our SFCC site. They select their shipping contact and method. The payment sheet updates the total amount. The user taps the "Pay" button and authenticates successfully via Touch ID / Face ID. Failure: The sheet immediately displays "Payment not completed" error. The onpaymentauthorized event is never fired on the client, and no paymentAuthorized calls reach our SFCC backend. We have confirmed this behavior is reproducible even when using the standard plugin_applepay provided by SFCC. There are no associated errors in the browser's JavaScript console or any server-side logs, as the process appears to fail within the native Apple Pay session before control is returned to our client-side code. Our Questions: Given this is occurring within an SFCC integration, we are trying to understand what could cause the session to terminate at this specific point. Are there internal validation checks that occur after successful user authentication but before the onpaymentauthorized event is dispatched? What configuration issues (e.g., in the ApplePayPaymentRequest, merchant identity certificate, etc.) are known to cause a failure at this exact step, especially within a platform integration like SFCC? Is there any additional client-side logging or debugging we can enable to get more insight into the internal state of the ApplePaySession? Any guidance from Apple engineers or other developers who have integrated Apple Pay with SFCC would be greatly appreciated. Thank you

Hello, We are implementing in-app provisioning in our fintech app; the card issuer is a third party, so we have limited control and visibility. We have ruled out the causes we could investigate on our side and on the card issuer’s side. We are reaching out to ask for your help in understanding what is going wrong so we can fix it. What happens: User taps “Add to Apple Wallet” → we present PKAddPaymentPassViewController → they tap Next → after a few seconds the flow fails with "Set Up Later" alert. Device log: ProvisioningOperationComposer: Step 'eligibility' failed with error <PKProvisioningError: severity: 'terminal'; internalDebugDescriptions: '( "eligibility request failure", "Received HTTP 500" )'; underlyingError: 'Error Domain=PKPaymentWebServiceErrorDomain Code=0 "Unexpected error." UserInfo={PKErrorHTTPResponseStatusCodeKey=500, NSLocalizedDescription=Unexpected error.}'; userInfo: '{ PKErrorHTTPResponseStatusCodeKey = 500; }'; Feedback Assistant ID: FB22007923 (Error during the In-App Provisioning process)

Dears, We are developing an apple wallet extension. In the Non-ui extension, in the getPaymentPassEntry overriden function we have to return an object such as: ``PKIssuerProvisioningExtensionPaymentPassEntry(identifier: identifier, title: label, art: getEntryArt(image: uiImage), addRequestConfiguration: requestConfig)!`` What is not clear are the requirements for this "art" parameter. Somewhere in the FAQ it says that the art has to be an image of 1536 x 969 resolution, <4 MB, squared corners, no chip contacts, and so forth) but we set there images of any size and the extension displays them without any problem. Are those requirements (1536 x 969 resolution, and so on) only for the images that are displayed in the wallet only after the card has been added? In this case, are those images coming from the PNO directly and not coming from the function above which is in the wallet extension? Thanks,

During Apple Pay in-app provisioning (EV_ECC_v2), our iOS app successfully obtains the issuer provisioning certificates and generates cryptographic material. The flow fails when Apple posts the card blob to Apple’s broker (card creation step), returning HTTP 500 from .../broker/v4/devices/{SEID}/cards. Steps: Call issuerProvisioningCertificates?encryptionVersion=EV_ECC_v2 → 200 OK; returns ECC leaf + Apple Root CA chain; nonce=2a831be4. 2. Build {encryptedCardData, activationData, ephemeralPublicKey} 3. POST /broker/v4/devices/{SEID}/cards Expected: 200 OK on /broker/v4/devices/{SEID}/cards, or 5xx with a descriptive error if payload/cryptography is invalid. Observed: 500 Internal Server Error from Apple broker on /cards (labeled “eligibility” in PassKit logs), causing a terminal failure in Wallet UI.

Hi, I’m encountering an issue in my app’s Wallet Extension, specifically within the Non-UI Extension, where we are unable to retrieve payment passes bound to a user’s account. The same code that successfully retrieves these bound cards in the main app does not work when used in the Non-UI Extension. Case-ID: 8932090 Steps to Reproduce: Set up In-App Provisioning: Ensure that the app has the necessary In-App Provisioning permissions. This functionality works correctly in the main app, confirming that the permissions are properly configured. Configure Wallet Extensions: Follow the Wallet Extensions documentation to configure the app, including all required settings for the Non-UI Extension. Add Code to Retrieve Payment Passes: In the main app’s LoginView, implement the following code in the handleLogin() method to retrieve payment passes: // Get the identifiers of payment passes that already exist in Apple Pay. paymentPassLibrary = self.passLibrary.passes(of: .secureElement) for pass in paymentPassLibrary { if let identifier = pass.secureElementPass?.primaryAccountIdentifier { if pass.isRemotePass && pass.deviceName.localizedCaseInsensitiveContains("Apple Watch") { remotePassIdentifiers.insert(identifier) } else if !pass.isRemotePass { passIdentifiers.insert(identifier) } } } Verify Functionality in Main App: Run the app and verify that the code successfully retrieves the payment passes bound to the user’s account. Implement Code in Non-UI Extension: Add the same code to the Non-UI Extension, specifically in the WNonUIExtHandler class within the override func status(completion: @escaping (PKIssuerProvisioningExtensionStatus) -> Void) method. Test in Wallet Extension: Run the Wallet Extension and observe that the payment passes are not retrieved when the code is executed in the Non-UI Extension. Has anyone encountered a similar issue or can provide insight into why the code might not work in the Non-UI Extension compared to the main app? Support Information: iOS Version: 17.5.1 Development environment: Xcode 15.4 (15F31d), macOS 14.3 (23D56) Any help or suggestions would be greatly appreciated. Thank you!

Hello Dear Network, We are developing a banking application and are implementing Apple Wallet In-App Provisioning with Wallet UI and Non-UI extensions. Our App Store submission fails with the error: "Missing entitlement com.apple.developer.payment-pass-provisioning" for both Wallet UI and Non-UI extensions. In the Apple Developer portal, we do not see the "Apple Pay" or "In-App Provisioning" capabilities available for our App ID or extension App IDs. We would like to request enablement of: Apple Pay Payment Pass Provisioning In-App Provisioning for our Apple Developer Team and related App IDs. Please let us know what we need to do for can upload build with that Entitlements, what can be problem? Thank you.

Hello, I'm using PassKit with to perform Apple Pay payment in a financial application. Our approach are: On iOS application, define PKMerchantCapability threeDSecure and credit, perform apple pay experience and get the encrypted response. On PCI service, receive the encrypted data Payment token, decrypt this data, and use to perform the payment. The problem is, in MasterCard transaction the eciIndicator is missing. I want to know if has some rule or problem about it.

I have a problem generating the domain certificate for a merchant id it gives me an error but when using the URL that Apple uses to validate said within the .well-known if the file can be loaded

Hi, You're here because you've had issues with your implementation of In-App Provisioning Extensions for Apple Pay In-App Provisioning or In-App Verification. To prevent sending sensitive credentials in plain text, create a new report in Feedback Assistant to share the details requested below with the appropriate log profiles installed. Gathering Required Information for Troubleshooting Apple Pay In-App Provisioning or In-App Verification Issues While troubleshooting Apple Pay In-App Provisioning or In-App Verification, it is essential that the issuer is able to collect logs on their device and check those logs for error message. This is also essential when reporting issues to Apple. To gather the required data for your own debugging as well as reporting issues, please perform the following steps on the test device: Install the Apple Pay and Wallet profiles on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The bundle IDs App bundle ID Non-UI app extension bundle ID (if applicable) UI app extension bundle ID (if applicable) The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: Open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp (including timezone) of when the issue was reproduced. The type of provisioning failure (e.g., error at Terms & Conditions, error when adding a card, etc.) The issuer/network/country of the provisioned card (e.g., Mastercard – US) Last 4 digits of the FPAN Last 4 digits of the DPAN (if available) Was this test initiated from the Issuer App? (e.g., yes or no) The type of environment (e.g., sandbox or production) Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or bundle ID of your app or app extensions in the Console app. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay client. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your client, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

I recently created a Sandbox account and successfully added an Apple Pay test MasterCard to the sandbox Wallet to run a test. Yesterday, I created a different account and tried to add a MasterCard on another device, but I received a "Card device limit" error. I then deleted the card from the original device (where it had been successfully added) and tried to re-add it, but this device also failed. I was able to confirm that a JCB card can be added, but I need to test with MasterCard. What should I do to resolve this?

For Apple Pay Testing purposes, we're trying out cards from https://developer.apple.com/apple-pay/sandbox-testing/ Visa, AMEX, Discover cards can be added to the wallet. But all 5 of the listed options for Mastercard cannot be added to the wallet with the error "Card Device Limit". How can we resolve this?

When I use my iPhone to scan the apple pay QR code in chrome, the url is https://applepaydemo.apple.com/apple-pay-js-api, I keep geting the "Service Unavailable" error. Wonder know if you guys meet this error as well? Btw, the QR code feature needs IOS 18.

During checkout at apple.com using a non-supported Apple Pay on the Web browser, apple.com presents a QR like code offering to "Scan Code with iPhone" to pay. The payment continues using Apple Pay on the iPhone after scan. We already offer Apple Pay and Apple Pay on the Web. Is this QR code option available for us for non-supported browsers? Could you point me to the docs to add it? Thank you.

Hello, I'm experiencing an irregular issue with Apple Pay merchant domain verification. As you know, Apple requires domain verification every two months to maintain Apple Pay functionality. The problem is that while the verification sometimes happens automatically without any issues, other times it fails to complete, even though the required file "apple-developer-merchantid-domain-association.txt" is correctly available on our server. When automatic verification fails, the Apple Pay service becomes non-functional on our website, forcing us to perform a manual verification to restore the pending service. Is it normal to encounter such inconsistent automatic verification processes? What could be causing these intermittent verification failures, whereas manual verification always succeed? suggesting this might not be related to IP address restrictions described on the Apple documentation. Thank you in advance,

Hi, I understand that it's possible to add a virtual debit or credit card from a mobile app into the iOS Wallet using PassKit from the Apple SDK. However, I haven't come across documentation on how to achieve this directly from a web app. I found this article on Apple's support site (https://support.apple.com/en-gb/guide/security/secdc2567239/web), which mentions adding cards from a card issuer’s website, but it doesn’t provide details on the process. Could you please confirm if it's possible to add a card directly from a web app without using a mobile app? If so, could you guide me to the relevant documentation? Thanks in advance!

I developed a web app using .net c#. The app runs a workflow which included Apple payment. App can work on any browser of any device (even non-IOS). When the app is browsed using PC windows Chrome browser, the payment sheet will show with QR code to scan using iPhone. If I cancelled the pop-up by clicking on X without scanning the code, and then returned to idle screen and performed another payment, I will reach paymentRequest.Show() but nothing will show and no errors are logged in console. Note that: I use Payment Request API The issue appear on the second payment. The issue will be solved once I refresh the page. My app supports both single and separate pages mode and issue appear on both. I used to see an error "Uncaught NotSupportedError: Failed to execute 'define' on 'CustomElementRegistry': the name apple spinner has already been used with this registry. So I thought the issue might be in loading the apple SDK script multiple times, and solved the issue to be loaded only once. The error disappeared but the issue persist without errors.

We have been using ApplePay on the web for years, but we are running into a problem since today in sandbox where domainName is missing from the create payment sessions request. We haven't changed anything related to this request any time recently. Static payment sessions url being hit in sandbox: https://apple-pay-gateway-cert.apple.com/paymentservices/paymentSession request format: "merchantIdentifier": "merchant.com.identifier", "displayName": "Test Store", "initiative": "web", "initiativeContext": "test.example.com", "domainName": "test.example.com" response format: { "epochTimestamp": 1763533367972, "expiresAt": 1763536967972, "merchantSessionIdentifier": "<merchantSessionIdentifier>", "nonce": "<nonce>", "merchantIdentifier": "<merchantIdentifier>", "displayName": "Test Store", "signature": "<signature>", "initiative": "web", "initiativeContext": "test.example.com", "signedFields": [ "merchantIdentifier", "merchantSessionIdentifier", "initiative", "initiativeContext", "displayName", "nonce" ], "operationalAnalyticsIdentifier": "Test Store:<identifier>", "retries": 0, "pspId": "<pspId>" } Production create session request to https://apple-pay-gateway.apple.com/paymentservices/paymentSession is behaving as expected, sending the following fields as response: epochTimestamp, expiresAt, merchantSessionIdentifier, nonce, merchantIdentifier, domainName, displayName, signature, operationalAnalyticsIdentifier, retries, pspId Claude seems to suggest this is a response when Messages for Business is enabled, but this ApplePay Payment Processing merchant is only configured for Apple Pay on the Web. Any ideas or pointers to check for? We are worried this will spill over in production as well, which will break our ApplePay integration. Thanks in advance!