Hi Team, For last 24 hours one of our team members is unable to login to apple dev portal due to two factor authentication not being sent. Error we are getting is "Verification codes can't be sent to this phone number at this time. Please try again later"

I am encountering an issue with the in-app provisioning flow using PKAddPaymentPassViewController. Specifically, when presenting the controller to allow users to add a pass to Apple Wallet, the device selection screen is showing all the devices, even after setting the primaryAccountIdentifier on the PKAddPaymentPassRequestConfiguration. Here's the context: I'm using PKAddPaymentPassViewController for in-app provisioning. I provide a valid primaryAccountIdentifier in the configuration. But after adding the pass, if i print back the primaryAccountIdentifier it displays some other value different than the identifier i had set(Example masked identifier: FAPLMC1GB000000066aa4xxxxxxxxxxxa744f16axxxxxxxx). The provisioning flow works, but the device list shown to the user includes all the devices (e.g., Apple Watches and iPhone even though it is already added to Apple Watch or iPhone).

Hello, We have implemented In-App Verification using both SMS and mobile app options. While SMS functions as expected, selecting the mobile app for verification in the Wallet app does not open our app on the first attempt. Instead, the verification window simply dismisses. However, if I select "Complete Verification" again and choose the mobile app, deep linking works as expected, and our app opens correctly. This issue occurs with any bank card and app I’ve tested in Wallet. Could this be a bug in the Wallet app where deep linking fails on the first attempt but works on the second?

Hello, I am setting up a feature for my company's banking app that allows users to add their payment/debit card they have with us to the Apple Wallet on their device. We have the in-app provisioning entitlement setup and configured in the app and configured with our banking partner/TSP. We are able to manually provision production environment cards via the Wallet app. I am using test card data from my TSP. I send them the two certificates, nonce, and nonce signature data and am given activationData, encryptedPassData, and an ephmeralPublicKey that we then set on an instance of PKAddPaymentPassRequest. We call the handler on the delegate method that is called with that request object and get an error: The operation couldn’t be completed. (PKPassKitErrorDomain error 2.) Looking at the PassKit library shows this is PKUnsupportedVersionError - Unsupported pass version. Our TSP hasn't been super helpful in troubleshooting this issue and just said we should contact Apple as it is an Apple error. I am trying to figure out if the issue is with how we are implementing the feature or with the test data itself given to us.

We are experiencing intermittent 403 Forbidden errors during Apple Pay on web merchant validation in our production and sandbox environment. Has anyone else started seeing 403 Forbidden errors recently (since mid-2025)? Why would merchant validation be sometimes successful and sometimes fail with 403? Could this be related to new Apple Pay gateway changes or stricter validation rules? Any additional debug steps or permanent solutions we should try? Thank you.

Hi, we are implementing the push provisioning via the Apple Wallet Extension starting from the example at https://developer.apple.com/documentation/passkit/implementing-wallet-extensions. To correctly manage the push provisioning on Apple Watch, specifically for a card tokenised in the iPhone but not in the Watch, we need to know if there is a connected Apple Watch to the iPhone. We are using the following code from the Apple Wallet Extension example to detect whether there is a connected watch: WCSession* session = [WCSession defaultSession]; session.delegate = delegate; [session activateSession]; In the main target of the app, at the end of the activation the system correctly calls the delegate method: session:activationDidCompleteWithState:error: but we noticed it is not being called in the UI extension context (the one having NSExtensionPointIdentifier: com.apple.PassKit.issuer-provisioning.authorization). We don't understand why the delegate is not being called in the UI extension, can you please help? Thanks! Steps to Reproduce: Start with a card not added in the Apple Wallet app Open the Apple Wallet app Click on add card Select the app to launch the Wallet Extension flow The Apple Wallet Extension with UI is on screen and invokes the activateSession method, the delegate method is not invoked and session.isPaired returns "no". Xcode Version 16.2 macOS Version 15.6.1 (24G90) Feedback ID FB20082564

Hi, we are implementing ID&V and there is a requirement regarding the flow for Apple Pay. In order to clarify the case I will describe the use case scenario or steps to reproduce first: add a card to the iPhone wallet app (yellow path verification required). Do not complete the ID&V process. add a card to the Watch via the Wallet inside the iPhone Watch app (yellow path verification required). Same as before, do not complete the ID&V complete ID&V process using the Issuer App either from iPhone or Watch. the Issuer app receives the application:openURL:options: callback on its AppDelegate. In the options dictionary, we can not see the UIApplicationOpenURLOptionsSourceApplicationKey populated (it is nil). At this moment, for the card we are adding there are now two tokens, both to be verified via ID&V process. One is on the iPhone and one is on the Apple Watch associated with the same iPhone. The url received at step 4 contains the serial number which identifies the digitized card and matches with both the tokens in the iPhone and in the Apple Watch. We need something to detect programmatically if the digitization process started from the iPhone Wallet app or from the wallet inside the Watch app. Could you please help us to identify how we could discriminate if the ID&V process has been started for the iPhone token or for the Apple Watch token? Thanks

I'm encountering an issue with Apple Pay on both Wallet and the Watch app where the app name is not showing up on the back of the payment card(Card details). The pass was successfully provisioned, and everything seems to be working, but the expected app name or brand isn't displayed, and instead, I see the generic "Something went wrong. Try again Later" message. Do we need to configure something to get this displayed in Wallet app?

Why did my sandbox test fail due to not being able to obtain the product list?

Apple Sandbox is not available in India, also Apple Pay itself is not supported by Indian Banks. How can I still test using Apple Pay sandbox in India? I am trying to add test cards on my iPhone and it fails to add it. It tries to connect to Issuer, which it should not for sandbox Apple Id. Can anyone help how to achieve this?

Hi, You're here because you've had issues with your implementation of Wallet Extensions for Apple Pay In-App Provisioning or In-App Verification. To prevent sending sensitive credentials in plain text, create a new report in Feedback Assistant to share the details requested below with the appropriate log profiles installed. Gathering Required Information for Troubleshooting Apple Pay In-App Provisioning or In-App Verification Issues While troubleshooting Apple Pay In-App Provisioning or In-App Verification, it is essential that the issuer is able to collect logs on their device and check those logs for error message. This is also essential when reporting issues to Apple. To gather the required data for your own debugging as well as reporting issues, please perform the following steps on the test device: Install the Apple Pay and Wallet profiles on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The bundle IDs App bundle ID Non-UI app extension bundle ID (if applicable) UI app extension bundle ID (if applicable) The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: Open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp (including timezone) of when the issue was reproduced. The type of provisioning failure (e.g., error at Terms & Conditions, error when adding a card, etc.) The issuer/network/country of the provisioned card (e.g., Mastercard – US) Last 4 digits of the FPAN Last 4 digits of the DPAN (if available) Was this test initiated from the Issuer App? (e.g., yes or no) The type of environment (e.g., sandbox or production) Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or bundle ID of your app or app extensions in the Console app. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay client. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your client, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

We have been informed by a third-party subscription tracking service(Adjust) that, due to the following specification of App Store Connect, it is not possible to connect an STG app (a non-published testing app) with their server: Specification: Since Apple’s API only allows access for apps that are already published, it is not possible to enable subscription tracking for iOS apps that are not yet published. Could you please confirm if our understanding of this specification is correct? Additionally, is there any method or recommended approach to verify subscription tracking behavior with an STG (non-published) app before the app is released? Thank you very much for your support.

I am facing an issue with Apple Pay js while doing the integration we are using reference https://applepaydemo.apple.com/apple-pay-js-api In this I can generate the merchantSession correctly But when I pass that merchantSession in session.completeMerchantValidation(merchantValidation) as per documentation It is getting failed and also no appropriate error is being shown in the console

During our Apple Pay integration testing, we encountered an issue that we're unsure how to resolve. Below are the steps we followed: Created an Apple Pay sandbox test account for Raul and added a test card, following the documentation here: https://developer.apple.com/apple-pay/sandbox-testing/ Opened the Golfmanager platform and initiated a booking. For payment, selected Apple Pay as the method. Raul clicked the Apple Pay button on the Golfmanager UI. He scanned the QR code using his iPhone, logged in with the test account. Apple Pay began validating our merchant identity and retrieved the wallet token to proceed with payment. The Apple Pay payment sheet appeared on Raul's iPhone, showing the card details and the amount requested by Golfmanager. Suddenly, the Apple Pay sheet closed unexpectedly, and we have no insight into what went wrong or what might be missing on our end. Here is the video: https://drive.google.com/file/d/1r-73edQ9eBZzXi6HoSYYGjKO8LbxBrZi/view?usp=drive_web

Hello, I am currently testing an Adyen integration with Sylius and need to verify Apple Pay with Cartes Bancaires in the sandbox environment. Could you please advise how Cartes Bancaires can be tested in Apple Pay Sandbox (e.g. cards details)? Thank you in advance for your guidance. Best regards, Grzegorz

Hello everyone, I have a small error 23. I wanted to know if you also already have this error so in the simulator it works, I have no error, but once I do in the TestFlight I have the error that appears error 23, can anyone help me on this? Thanks a lot.

Hi, We are trying to make payment from ecomm merchant. The last request during process is { "sessionData": { "epochTimestamp": "1741082241", "expiresAt": "1741092241", "merchantSessionIdentifier": "SSH88312C485D_7E0DD10173", "nonce": "3f6dc197", "merchantIdentifier": "5F9BC6BAF8", "domainName": "libertybank.ge", "displayName": "Apple Pay Purchase", "signature": "3080060000", "operationalAnalyticsIdentifier": "Apple Pay Purchase:5F9BC6BAF8", "retries": 0, "pspId": "5F9BC6BAF8" } } which is successfully validated applePaySession.completeMerchantValidation(data.sessionData) After this, the "oncancel" handler is triggered in applePay. Please help us to understand what is wrong. Please note the domain where the applepay button is located is at txpg.libertypay.ge Which is successfully verified.

Hello My app has implementation of In App Provisioning which is working fine. We have now added Wallet Extensions to it, but my App is not shown in Apple Wallet "From apps on your iphone" I have uploaded Feedback (FB16450547) at https://feedbackassistant.apple.com/feedback/16450547 Kindly request for your advice

Dear Team, we are from Austria and want to test our apple pay on the web implementation via Apple Sandbox. As far as we can see Austria is not on the list that sandbox supports Apple Pay testing for. Can you please advise how can we move forward with testing? We have already created and also tried out our Sandbox account on iPhone 11 and successfully added test cards to the Wallet. Can we expect please in later stage some restrictions due to our region? Thank you in advance. Iveta

Hi, I'm developer in fintech company, we have setup process for onboarding merchants for our partner and processing payments with usage of Apple Pay API. Daily system is processing ca. 10k payments but every day ca. 100 of transactions are declined because of merchant validation error: request to https://apple-pay-gateway.apple.com/paymentservices/paymentSession (with all required parameters in body) is returning response with status code 417 "statusMessage": "Payment Services Exception merchantId={root merchant id} unauthorized to process transactions on behalf of merchantId={merchant id hash} reason={merchant id hash} is not a registered merchant in WWDR and isn't properly authorized via Mass Enablement, either." Issue impacts recurring merchants, most of their transactions are processed successfully but randomly some of them are failing with such reason. All prerequisites are met: merchant have deployed 'apple-developer-merchantid-domain-association' certificate, certificates are valid and not expired. Apple Support is not able to provide any information based on provided requests timestamps. We would to know what may be the reason just part of the requests are failing and what 417 error code means.