Hi, You're here because you've had issues with your implementation of Wallet Extensions for Apple Pay In-App Provisioning or In-App Verification. To prevent sending sensitive credentials in plain text, create a new report in Feedback Assistant to share the details requested below with the appropriate log profiles installed. Gathering Required Information for Troubleshooting Apple Pay In-App Provisioning or In-App Verification Issues While troubleshooting Apple Pay In-App Provisioning or In-App Verification, it is essential that the issuer is able to collect logs on their device and check those logs for error message. This is also essential when reporting issues to Apple. To gather the required data for your own debugging as well as reporting issues, please perform the following steps on the test device: Install the Apple Pay and Wallet profiles on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The bundle IDs App bundle ID Non-UI app extension bundle ID (if applicable) UI app extension bundle ID (if applicable) The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: Open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp (including timezone) of when the issue was reproduced. The type of provisioning failure (e.g., error at Terms & Conditions, error when adding a card, etc.) The issuer/network/country of the provisioned card (e.g., Mastercard – US) Last 4 digits of the FPAN Last 4 digits of the DPAN (if available) Was this test initiated from the Issuer App? (e.g., yes or no) The type of environment (e.g., sandbox or production) Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or bundle ID of your app or app extensions in the Console app. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay client. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your client, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Hi, To ensure the issue is not caused by an error within your app or web service request, please review the Apple Pay Merchant Integration Guide. Additionally, please review the following technotes on Apple Pay: TN3173: Troubleshooting issues with your Apple Pay merchant identifier configuration TN3174: Diagnosing issues with the Apple Pay payment sheet on your website TN3175: Diagnosing issues with displaying the Apple Pay button on your website TN3176: Troubleshooting Apple Pay payment processing issues If the resources above don’t help identify the cause of the error, please provide more information about your app or web services to get started. To prevent sending sensitive credentials in plain text, create a report in Feedback Assistant to share the details requested below. Additionally, if the error is something we need to investigate further, the appropriate engineering teams also have access to the same information and can communicate with you directly within Feedback Assistant for more information, as needed. Please follow the instructions below to submit your report. For issues occurring with your native app or web service, perform the following steps: Install the Apple Pay profile on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp of when the issue was reproduced. Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or merchant domain in the Safari Web Inspector. See Inspecting Safari on macOS to learn more. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay website. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your web implementation, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

I recently created a Sandbox account and successfully added an Apple Pay test MasterCard to the sandbox Wallet to run a test. Yesterday, I created a different account and tried to add a MasterCard on another device, but I received a "Card device limit" error. I then deleted the card from the original device (where it had been successfully added) and tried to re-add it, but this device also failed. I was able to confirm that a JCB card can be added, but I need to test with MasterCard. What should I do to resolve this?

I am facing a problem of payment using credit card. I tried several banks and cards without any result. I also used one of the card I have successfully paid another account. Heeeeelp

Hello forum, Hope all is great! I have a shortcut automation which uses the transaction trigger. Since updating to ios 18 the transaction trigger does not work anymore. Whenever a transaction is done, the “Running your automation” notification does not show up and the automation does not work. To share with you the steps I’ve done so far: 1.Remove the automation and do it again 2.Remove the card from apple pay 3. Delete and install again the shortcut app 4. Turned on and off the phone I can confirm the automation works on my other iPhone with the latest version of IOS 17. Would really appreciate if anyone has any insights about that, or if this happened to you as well. Cheers! Dorin

This error occurs in Apple Pay Wallet In-App Provisioning Flow for Credit / Debit Cards When the data received from the PNO (Visa) is passed to PKAddPaymentPassRequest this error is seen in addPaymentPassViewController, in the finalize stage. Docs provide no clue as to what could be wrong. iOS 18.2.1 XCode 15.2 Error description mentions "unsupportedVersionError" Is the pass version not supported? Is the wallet version not supported? Is it an app implementation error or error in the data received from the PNO?

All the cards seem to have expired in Dec 2024: https://developer.apple.com/apple-pay/sandbox-testing/ Are there updated cards? Some gateways only support Mastercard and Discover which all appear expired.

When integrating the Wallet Extension, after clicking my app icon from the "From Apps on Your iPhone" list, I encountered the message: "Cannot Add Card. 'XXX' is not responding. Wait a few minutes and try again. If the problem continues, contact the card issuer's customer service" instead of the configured login page appearing as expected. What could be causing this issue, and how should I resolve it?

We rely on ApplePaySession.applePayCapabilities() to decide whether to show the Apple Pay button. We use two different merchant IDs for non-prod/prod environments, and encountered a change in behavior where this API now returns different results. These merchant IDs are generated from a third-party provider Adyen. However, Adyen has informed us that they are unable to identify the root cause of the issue and advised us to seek assistance directly from Apple Pay support. Timeline Last known working date: 13/08/2025 Issue first noticed: 18/08/2025 Environment Details Apple Pay JS API version 1.latest Browsers Tested: Third party browsers including Chrome/139.0.0.0, Firefox/141.0 Browsers with ApplePaySession built-in (like iOS Chrome, iOS Safari, and macOS Safari) are working fine Framework Stack: Angular v18.1.3 (important) no configuration setup in Apple dev account, merchantId is generated from a third-party provider Adyen. Current Execution Flow: Apple Pay JS API script element is injected <script type="text/javascript" async="" src="https://applepay.cdn-apple.com/jsapi/1.latest/apple-pay-sdk.js"></script> Triggers below to check apple pay readiness, different ${merchantId_credential} is used: await window.ApplePaySession.applePayCapabilities(`${merchantId_credential}`); (**ApplePaySession is a valid object at this point) Observed that different paymentCredentialStatus is returned // nonprod env { "paymentCredentialStatus": "applePayUnsupported" // unexpected } // prod env { "paymentCredentialStatus": "paymentCredentialStatusUnknown" } The same code is executed in each environment and the behaviour was also the same, but has changed since then. Side notes By checking the SDK’s internal code, we saw that in third-party browsers it makes an extra call to the following endpoint. Responses from this call also come back differently depending on the merchantId. When invoking below: curl -X POST \ https://smp-paymentservices.apple.com/paymentservices/v3/checkStatus/merchant/{merchantId} \ -H 'Content-Type: application/json' \ -d '{ "initiative": "web", "initiativeContext": "env_specific_domain" }' Our non-prod environment returns {"registered":false} while using prod's merchantId and domain it returns {"registered":true}. We thought the issue might be domain-related since the environments are on different domains, but so far, no luck. The main questions we're looking to resolve are: Why did the behavior change at a certain point despite no code changes? How should we approach this investigation, and what specific requests should we be making to the Adyen team? Why does the response from the call to https://smp-paymentservices.apple.com/paymentservices/v3/checkStatus/merchant/{merchantId} return different results? Perhaps this could provide a clue regarding the question above? We noticed that canMakePayments() is returning true, so we could consider using that as a workaround. Would it be safe to change the source of truth relying on canMakePayments() for displaying Apple Pay? There is a concern that this issue may also occur in our production environment, so we would appreciate assistance in understanding what is happening and finding a resolution.

Hello everyone, I’m currently in the process of implementing Apple Pay on my company’s e-commerce website under a subscription model with recurring payments. I would appreciate some help in clarifying the following points: Is the applicationPrimaryAccountNumber the DPAN and the merchantTokenIdentifier the MPAN? If not, which fields represent each one or how do I recognise them? Is the onlinePaymentCryptogram used only for processing payments with the DPAN, or is it also involved when using the MPAN? Is the onlinePaymentCryptogram single-use or does it have an expiration time? Or is it reusable with no limits? According to Apple’s data policies, is it recommended for our servers to perform the payment token decryption (debundling), or should this only be handled by the payment gateway processor to stay compliant? Below is the payment request I’m using for testing, along with the decrypted payment token returned for a test card: Payment Request: { "countryCode": "US", "currencyCode": "USD", "merchantCapabilities": ["supports3DS", "supportsDebit", "supportsCredit"], "supportedNetworks": ["visa", "masterCard", "amex", "discover"], "requiredBillingContactFields": ["postalAddress", "name"], "lineItems": [ { "label": "Subtotal", "amount": "9" }, { "label": "Taxes", "amount": "1" } ], "total": { "label": "Demo (Card is not charged)", "amount": "10", "type": "final", "recurringPaymentIntervalUnit": "month" }, "recurringPaymentRequest": { "paymentDescription": "Recurring payment", "regularBilling": { "label": "Demo (Card is not charged)", "amount": "10", "type": "final", "paymentTiming": "recurring", "recurringPaymentIntervalUnit": "month" }, "managementURL": "${window.location.origin}/api/managePaymentMethod" } } Decrypted Payment Token: { "applicationPrimaryAccountNumber": "5204240494898922", "applicationExpirationDate": "280630", "currencyCode": "840", "transactionAmount": 0, "deviceManufacturerIdentifier": "050110030273", "paymentDataType": "3DSecure", "paymentData": { "onlinePaymentCryptogram": "MCt5xR+VnQAAAAM/8mUjAAADFIA=" }, "merchantTokenIdentifier": "DM4MMC1US000000042e438d170774669844e732a41c28e97", "merchantTokenMetadata": { "cardMetadata": { "longDescription": "Test Bank for MasterCard MTF", "cardCountry": "US", "shortDescription": "Test Bank 2", "fpanSuffix": "0049" }, "cardArt": [ { "url": "https://nc-crt-smp-device-asset.apple.com:443/broker/v1/assets/174ce63257704d93b00aff8aa09ec0d5", "name": "cardBackgroundCombined@2x.png", "type": "image/png" } ] } } Thanks in advance for your help and guidance.

After opening the Apple Pay Popup and try to close the popup (without scanning the QR Code), the oncancel handler (accociated with the created session) doesn't fire. Meanwhile if the merchant scanned the QR code and the UI of the popup changed, then cancel the popup manually (using close (X) button), it fires the session.oncancel event handler. Here is applied setup: const { ApplePaySession } = window; if (!(ApplePaySession && ApplePaySession.canMakePayments())) { return new Error('Apple Pay Session is not available'); } const paymentCapabilities = await ApplePaySession.applePayCapabilities( applePaymentOptionsMetaData.merchantIdentifier, ); if (paymentCapabilities.paymentCredentialStatus === 'applePayUnsupported') { console.error('ApplePaySession is not supported.'); return; } const request = { "countryCode": "KW", "currencyCode": "KWD", "merchantCapabilities": [ "supports3DS" ], "supportedNetworks": [ "VISA", "MASTERCARD" ], "billingContact": { "phoneNumber": "201000000000", "emailAddress": "example@test.com", "givenName": "Ahmed", "familyName": "Sharkawy" }, "total": { "amount": "3.085", "label": "Merchant Testing" } } const session = new ApplePaySession(5, request); session.onvalidatemerchant = async event => { if (debug) { console.info('Creating merchant session and validating merchant session'); console.info('onvalidatemerchant event', event); } try { // Validation Merchant Request session.completeMerchantValidation(data); } catch (error: any) { session.completePayment({ status: ApplePaySession.STATUS_FAILURE }); } }; session.onpaymentauthorized = async (event) => { session.completePayment({ status: ApplePaySession.STATUS_SUCCESS }); }; // This doesn't fire session.oncancel = () => { console.info('EVENT: oncancel'); }; session.begin();

Hello, I have had a problem with Transaction shortcut automation since last month, the automation does not work anymore. Whenever a transaction is done, I tap in the notification to run the automation but always gives the error "Automation failed". I can confirm the automation worked last month but suddenly it is not working anymore. Below is the screenshort of the error and the other image is how it appeared in numbers when running the automation. As you can see, in Jan 8th worked fine (that is why the full name of the card appears). Actually, the other rows are from another shortcut that I have. I would really appreciate if anyone has any insights about that, or if this happened to you as well. Thanks in advance! Arnold

Description: I’m integrating Apple Pay JS (version 3) into an Angular application. Here are the key details: Environment: Angular (latest) Apple Pay JS v3 Chrome (confirmed window.ApplePaySession is available) application region is in US. I'm in Taiwan and using my iPhone Taiwan account to scan the QR Code/ Implemented Handlers: onvalidatemerchant onpaymentmethodselected onpaymentauthorized oncancel Observed Behavior: When I click the Apple Pay button, the console logs: Failed to execute 'postMessage' on 'DOMWindow': The target origin provided ('https://applepay.cdn-apple.com') does not match the recipient window's origin ('https://{our-domain-name}') Despite this, the QR code still appears. Scanning the QR code with an iPhone 13 Pro running iOS 18.4.1 brings up the Apple Pay sheet with the correct amount, but payment never completes. In the browser, none of my Angular event handlers fire except oncancel. Questions: What causes the postMessage origin mismatch with Apple’s CDN frame, and how should my application handle it? Why doesn’t onpaymentauthorized ever fire, and how can I complete the payment flow so that session.completePayment() succeeds? Any guidance or sample code snippets for a proper merchant-validation and payment-completion sequence in this setup would be greatly appreciated. my code onApplePayButtonClicked() { if (!ApplePaySession) { console.error('[ApplePay] ApplePaySession is not supported'); return; } // Define ApplePayPaymentRequest const request : ApplePayJS.ApplePayPaymentRequest = { countryCode: this.currencyCode, currencyCode: Constants.CountryCodeUS, merchantCapabilities: this.merchantCapabilities, supportedNetworks: this.supportedNetworks, total: { label: this.label, type: "final" as ApplePayJS.ApplePayLineItemType, amount: this.orderAmount.toString(), }, }; // Create ApplePaySession const session = new ApplePaySession(3, request); session.onvalidatemerchant = async event => { console.info('[ApplePay] onvalidatemerchant', event); try { const merchantSession = await fetch(`${this.paymentUrl}/api/applepay/validatemerchant`, { method: 'POST', headers: { 'Content-Type': 'application/json', }, body: JSON.stringify({ PKeyCompany: this.paymentAppleMerchantId, ValidationUrl: event.validationURL }) }).then((r) => r.json()); session.completeMerchantValidation(merchantSession); } catch (error) { console.error('[ApplePay] onvalidatemerchant MerchantValidation error', error); session.abort(); } }; session.onpaymentauthorized = (event) => { console.info('[ApplePay] paymentauthorized', event); const token = event.payment.token; this.paymentTokenEmitted.emit({ token: JSON.stringify(token), paymentType: PaymentOptionType.ApplePay }); session.completePayment(ApplePaySession.STATUS_SUCCESS); }; session.onpaymentmethodselected = (event) => { console.info('[ApplePay] paymentmethodselected', event); const update: ApplePayJS.ApplePayPaymentMethodUpdate = { newTotal: request.total }; session.completePaymentMethodSelection(update); }; session.oncancel = (event) => { console.error('[ApplePay] oncancel', event); this.errorEmitted.emit({ error: 'Apple Pay cancel' }); }; session.begin(); }

I have the HCE entitlements, but it's not clear from the documentation I have, how to configure my app as the default app for the double tap of the power button. Nor can i see where this is in iOS 18.2 settings. The closest I can find is 'Settings > Default Apps > Contactless App', which still shows only Wallet after I install my app with all the new entitlements and provisioning profile. I have these entitlement successfully provisioning my app: <key>com.apple.developer.nfc.hce</key> <true/> <key>com.apple.developer.nfc.hce.iso7816.select-identifier-prefixes</key> <array> <string>A0000000031010</string> <string>A00000002501</string> <string>A0000000049999</string> <string>A0000000041010</string> </array> <key>com.apple.developer.nfc.hce.default-contactless-app</key> <true/> The documentation here: https://developer.apple.com/support/hce-transactions-in-apps/ also references a link to changes in Info.plist, but the url takes me to storekit-external-entitlement documentation about dating apps in the netherlands ???!!!??? Any help would be appreciated to at least get started by allowing me to change the double tap action to my app. Thanks

We have integrated the card provisioning in Apple wallet for quite sometime now through an external processor and we got the App Entitlement for the same. Now we are building the card provisioning in Apple Wallet flow in our app. Though everything seems to work fine (including issuer certificates, nonce etc.) but when we are clicking on ADD button on card details screen, I am getting an error saying "Could Not Add Card". When I inspect the error from didFinishAddingPaymentPass, it reads "The operation couldn’t be completed. (PKPassKitErrorDomain error 2.)". Though the Apple documentation suggests it as an unsupportedVersionError but it does not say anything beyond that. I want more detailed explanation because of which I am getting this error

We have implemented In-App Provisioning, but when I start the tokenization process, I receive an error before the terms and conditions. We are testing with a version of the app on TestFlight. The error message is: Could not add card. Try again later or contact your card issuer for more information. Could you please help me?

Does anyone have info about the Retention Messaging API. We've requested access to it, but there's no answer.

Hello. What is the process to get my company listed as an approved Apple Pay Payment Service provider here: https://developer.apple.com/apple-pay/payment-platforms/ We are integrating Apple Pay on our gateway. Our customers are merchants who accept ecommerce payments via our payment gateway. We would like to appear on the list here: https://developer.apple.com/apple-pay/payment-platforms/ Thank you.

Hi, I set up a Sandbox Tester account in my company’s Apple Developer Program and signed in on my iPhone under Settings → App Store → Sandbox Account. When I go to Wallet → Add, I only see options for Credit or Debit Card or Travel Card. The option to add an Apple Pay Sandbox Card is missing, and when I try entering the test card numbers from Apple’s documentation (developer.apple.com/apple-pay/sandbox-testing), the card is not valid. Has anyone experienced this and found a solution? Thanks! PS: I can't post this to Wallet Category, I keep getting error that it contains sensitive text.

Hello, we are experiencing issues with adding VISA cards via In-App Provisioning on iOS using PassKit. The same flow works correctly with Mastercard, but for VISA cards the Apple broker endpoint returns HTTP 500. Details Device: iPhone15,3 (iPhone 15 Pro), iOS 18.6.1 (22G90) Region: CZ App: [REDACTED] (version 0.4.3) Issuer ID: [REDACTED] Merchant ID and entitlements are configured and validated. SEID: [REDACTED] Request flow GET /broker/v4/devices/{SEID}/issuerProvisioningCertificates?encryptionVersion=EV_ECC_v2 Request ID: B61363A8-0BFF-4CD6-92BC-52C461DFFAAD Response: 200 OK Conversation ID: e12c64c9a0b54981adfad8d00800d836 Returned nonce: [REDACTED] Timestamp: 2025.08.21_14-01-46+0200 POST /broker/v4/devices/{SEID}/cards Request ID: F29B73CA-CDDE-4C0C-9F40-B87AE006FDDD Payload fields present (values redacted): encryptedCardData [REDACTED], ephemeralPublicKey [REDACTED], publicKeyHash [REDACTED], nonce [REDACTED], issuerIdentifier [REDACTED], encryptionVersion=EV_ECC_v2 Response: 500 Internal Server Error (latency ~0.41s) Timestamp: 2025.08.21_14-01-47+0200 Observation Provisioning succeeds with Mastercard but consistently fails with VISA. The GET issuerProvisioningCertificates succeeds; the POST …/cards returns 500. Request Could you please: Provide internal error details for Request ID F29B73CA-CDDE-4C0C-9F40-B87AE006FDDD (and/or Conversation ID e12c64c9a0b54981adfad8d00800d836), Confirm whether the 500 originates before or after the broker’s call to VTS (Visa Token Service), and Validate that our app/merchant/issuer configuration is fully enabled for VISA push provisioning in our region. Attached privately: sysdiagnose with full traces (can share via secure channel upon request). Kind regards, Martin

For Apple Pay Testing purposes, we're trying out cards from https://developer.apple.com/apple-pay/sandbox-testing/ Visa, AMEX, Discover cards can be added to the wallet. But all 5 of the listed options for Mastercard cannot be added to the wallet with the error "Card Device Limit". How can we resolve this?

For Apple Pay testing, I have tried the following: Sign into the Sandbox Account via Developer Settings: Settings > Developer > Sandbox Account Keep your main Apple ID for everything else Add Test Cards to Wallet: Try adding the test card numbers (MasterCard and Visa Debit, as we support only those) Apple provides in their documentation. Unfortunately, none of them are added to the wallet. All the time it gives 'Could Not Add Card'. I tried on devices with iOS 18+. Can anyone advise on this? Thanks