Hi Team, We’re encountering a device-specific issue with our SMS Message Filter extension. The extension works as expected on an iPhone 11 running iOS 16.6, but it does not trigger on an iPhone 12 Pro running iOS 16.7. Key Observations: The extension is implemented using ILMessageFilterExtension and calls messageFilterOffline(appGroupIdentifier:for:) from our shared library. The App Group is properly configured and accessible across the app and extension. The extension is enabled under Settings > Messages > Unknown & Spam. There are no crashes or error logs reported on the affected device. The issue is consistently reproducible — it works on one device but not the other. We’re wondering if this could be a regression or a device-specific behavior change introduced in iOS 16.7. Has anyone encountered similar inconsistencies in Message Filter extensions across different iOS versions or device models? Any guidance or suggestions would be greatly appreciated. Thanks in advance!

I am still struggling to nail down the screen time between monitoring and showing it in a DeviceActivityReport. It's always off by a couple of percentage points, which results in a difference of a couple of minutes between the time shown for my total screen time in DeviceActivityReport and DeviceActivityMonitor with a threshold set for all apps/websites/categories. In the report, I am looping through all segment (there is only 1 segement using .daily segment interval for a given day) then loop through all categories and all apps within each category and sum up all totalActivityDuration for each app. Based on avaiable documentation, that should corrolate to DeviceActivityMonitor threshold but it doesn't. Are there any differences in how these 2 places count screen time? Are there any apps/core ios services which are excluded from DeviceActivityMonitor. Would appreciate any help at all, I'm losing my mind here. My current suspicion is that Apple Developer documentation is counted twice. i.e. this website https://developer.apple.com/documentation/deviceactivity/deviceactivitymonitor shows up in usage as an App with bundleId of apple.developer.wwdc-release and time spent there is counted twice, against this bundleId AND Safari. I don't know why it's not counted as a webdomain.

I have a question regarding CarKeyErrorCode in the CarKey framework. I plan to use the following methods in the CarKey framework: CarKeyRemoteControl.start CarKeyRemoteControlSession.vehicleReports CarKeyRemoteControlSession.perform RemoteKeylessEntryAction.ExecutionRequest.results Each of the above methods throws an Error. Are these different from CarKeyErrorCode? Is CarKeyErrorCode only used in CarKeyRemoteControlSessionDelegate.remoteControlSession(_:didInvalidateWithError:)? If methods 1-4 do not return CarKeyErrorCode, what kind of Error do they return? Thank you in advance.

Hi Im creating an app with Alarmkit, the idea is to have the hardware buttons react like they do in Alarmclock with a snooze or if the buttons can just mute without intent. right now, hardware button end and dismisses the Alarm. its instinct to click that button. apple needs to update or do something.

reposting this in case it got missed the first time around here https://developer.apple.com/forums/thread/775900 We had a question that came up when we comparing data from WeatherKit to other sources - WeatherKit visibility was well beyond the boundaries we had historically, even from Darksky. That raises two questions: is visibility actually in meters like the docs say? is this visibility at ground level, 500ft, or some other height? We were seeing visibility numbers of up to 40 miles (after converting the number the API sent to miles), where all of our other sources are usually within 10 miles

Hi, I would like to reset system window private picker alert with ScreenCapture kit. i can reset the ScreenCapture permission with tccutil reset ScreenCapture. but it does not reset the system window private picker alert. i tried deleting the application directory from container and it does not help. the system window private picker alert uses the old approval i gave and it does not prompt a new alert. How can i starta with fresh screencapture kit settings for an app in testing? Thanks

At WWDC25 we launched a new type of Lab event for the developer community - Group Labs. A Group Lab is a panel Q&A designed for a large audience of developers. Group Labs are a unique opportunity for the community to submit questions directly to a panel of Apple engineers and designers. Here are the highlights from the WWDC25 Group Lab for watchOS (part 1). 1. I'm really excited about the new design system on all platforms. Liquid Glass is super cool. What do developers need to keep in mind when building for watchOS 26? To adopt the new design system, start with updating your app for watchOS 10 – If you have done so, your app will be mostly ready for watchOS 26. For more information, see Design and build apps for WatchOS 10. You can then look into Liquid Glass specific APIs to fine tune your app. This topic is covered in Adopting Liquid Glass. If you have SwiftUI views using any custom style, make sure they are still legible and fit with the new design system. 2. Something that really stood out to me were updates to the Smart Stack, with the system prioritizing Widgets when they're most relevant. Tell me more about these new opportunities for apps. Workout apps that record workouts using HealthKit may be automatically suggested on the watch face and appear in the Smart Stack without adding a widget. Relevant widgets are a great way to present information related to a date, location, point-of-interest type, sleep schedule, or fitness condition in the Smart Stack when it is relevant. Relevant widgets don't need to display a empty state view when they are not relevant. They are only shown in the Smart Stack when relevant. The watchOS 26 Design ToolKit in the Apple Design Resources includes a set of templates that you can use to layout your widgets. 3. Is the Wrist Flick gesture available to developers in the same way as Double Tap is? The system uses Wrist Flick to dismiss notifications and incoming calls, silence timers and alarms, or return to the watch face. There is no separate API for the Wrist Flick gesture. Apps that are using XCUIAutomation to make sure their user interface behaves as intended can use the XCUIDeviceHandGesture.flick to automate tests that verify that their app responds appropriately to the Wrist Flick gesture. For apps using automated testing, the XCUIDeviceHandGesture.doubleTap can be also be used to automate testing of the app with the Double Tap gesture. See XCUIDevice.perform(handGesture:) 4. Can HRV measurements be triggered on demand via API in watchOS? Guidelines or processes for enabling energy-intensive biometric sampling on development devices for IRB-approved research? You don’t have direct control on the sampling rate in watchOS. You can use HealthKit (HKQuantityTypeIdentifierHeartRateVariabilitySDNN, to be specific) to query the HRV data, once the system has sampled and persisted the data to HealthKit. If that doesn’t help, we suggest that you file a feedback report with your concrete use case for us to investigate. Specific to IRB-approved research using Apple Watch or its companion iPhone, you might want to look at this FAQ and SensorKit to see if they can be of any help. 5. What is the best advice for someone who is new to making a watchOS app that’s been on iOS and iPadOS? You can start with exploring the system experience features on watchOS, such as notifications, controls, and widgets, and getting familiar with the system spaces, like Smart Stack, watch face, and control center. Knowing the watchOS app design principles and practices is important as well. Design and build apps for WatchOS 10 is a great resource for this topic. SwiftUI is an amazing across-platform framework, and you will use it to create your watchOS app. If you're already using it, great! Keep in mind some watch-only constraints. Comparing to iPhone or iPad, Apple Watch has a limited battery and smaller screen size, which significantly impacts how people use your app and how your app works. 6. Was there any extension this year to the 7 day limit on querying Apple Health data on the watch? There is no change on the limit this year. You can get this official limit at runtime using earliestPermittedSampleDate. There are some exceptions, and so don't be surprised if you see some data types are retained longer. The companion iPhone holds the full set of the health data. If you need to access the health data that has been purged from the Apple Watch, consider doing it with your iOS app, and then passing the result to your watchOS app.

After a user has launched an App Clip Experience from Safari and is done with the activity that the App Clip provides – is there a way for the App Clip to programatically close itself so the user returns to Safari?

My CoreSpotlight extension seems to exceed the 6 MB memory limit. What’s the best way to debug this? I've tried to attach the debugger on the Simulator but the extension seems to be never launched when I trigger the reindex from Developer settings. Is this supposed to work? On device, I am able to attach the debugger. However, I can neither transfer the debug session to Instruments, nor display the memory graph. So I've no idea how the memory is used. Any recommendations how to move forward? Is there a way to temporarily disable the memory limit since even with LLDB attached, the extension is killed.

App is repeatedly rejected under Guideline 2.5.1 for referencing the private API:_SecCertificateIsValid Reported custom framework CommonLibrary.framework. The SDK is written in Objective-C and uses only public Security APIs. It does not use any deprecated APIs. We have verified the framework binary using nm, otool, and strings, and _SecCertificateIsValid does not appear in exported or hidden symbols. Bitcode is disabled, dead-code stripping is enabled, and the Release build uses -Os. Despite this, App Store Connect continues to detect _SecCertificateIsValid. We have attached herewith screenshots of our analysis for the reference. Can Apple’s server-side analysis or Security.framework internals still surface _SecCertificateIsValid? Is there a recommended way for SDK authors to prevent this symbol from being flagged?

I'm currently experimenting with AlarmKit and, when configuring an alarm with a Relative schedule, but that never repeats, I find that it is still scheduled in the AlarmManager, but the documentation says that an alarm that has no repeat schedule will be removed from the AlarmManager after firing. This behavior is experienced both in my project and with the sample code AlarmKit-ScheduleAndAlert To reproduce, create a non-repeating alarm, and, after firing, it will still be on the list marked as Scheduled Am I doing something wrong or is this a bug?

Hi! I'm building a Screen Time management app using FamilyControls and ManagedSettings. When a user taps the primary button on a ShieldActionExtension, I need to open my main app to guide them through an intervention exercise. Other approved App Store apps like Jomo - Screen Time Blocker do exactly this: tapping their shield's primary button opens the main Jomo app directly. Screen recording: https://drive.google.com/file/d/15yubtTdTkFskGCIaAw_HGB57-boHPl3a/view?usp=sharing I've tried: URL schemes (UIApplication.shared.open() unavailable in extensions) Universal links Local notifications (works, but adds an extra tap) NSUserActivity Is there a supported API I'm missing? Or another accepted solution? Any guidance is appreciated.

We developed a "Default Translation App" following the guide: https://developer.apple.com/documentation/translationuiprovider/preparing-your-app-to-be-the-default-translation-app. I have already configured everything that needs to be configured according to the document, but there is still this problem

如下图所示，在iOS18以上，这个识别话术为“xx主叫号码”，这个如何修改？ 附：iOS18以下话术就很合理

I am getting bug reports from users that occasionally the AlarmKit alarms scheduled by my app are going off exactly at midnight. In my app, users can set recurring alarms for sunrise/sunset etc. I implement this as fixed schedule alarms over the next 2-3 days with correct dates pre-computed at schedule time. I have a background task which is scheduled to run at noon every day to update the alarms for the next 2-3 days. Are there any limitations to the fixed schedule which might be causing this unintended behavior of going off at midnight?

testing

Hi, I'm using ScreenCaptureKit on macOS 14+ to record a single window. I've noticed that the Presenter Overlay only appears when capturing the entire screen, but it does not appear when recording a specific window or a region. Is there a way to enable the Presenter Overlay while recording a single window or a defined region, similar to how it works with full-screen capture? Any guidance or clarification would be greatly appreciated. Thanks in advance!

I am getting this error when I try to show device activity report view by this DeviceActivityReport(appsContext, filter: filter) Attempt to map database failed: permission was denied. This attempt will not be retried. I have taken access by this way. AuthorizationCenter.shared.requestAuthorization(for: .individual) Detailed errors: LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Attempt to map database failed: permission was denied. This attempt will not be retried.

Environment: macOS 15.2 (24C101) with Xcode 16.2 (16C5032a) Goal: I am trying to build a simple IMKInputController-based input method. Problem: My .app bundle registers successfully and I can select it as an input source. When selected, it blocks keyboard input, but my handle method does not seem to execute or produce output. I have placed NSLog statements in my controller's init and handle methods. Code for the controller: import InputMethodKit // The IMKTextInput protocol is provided by the framework. // We don't need to define our own bridging protocol for this test. public class HelloWorldController: IMKInputController { public override init!(server: IMKServer!, delegate: Any!, client inputClient: Any!) { super.init(server: server, delegate: delegate, client: inputClient) NSLog("HelloWorldIME: Controller has been initialized.") } public override func handle(_ event: NSEvent!, client sender: Any!) -> Bool { NSLog("HelloWorldIME: handle() method was called.") // ================== FINAL FIX APPLIED HERE ================== // 1. First, we ensure the client is a fundamental Objective-C object. guard let clientObject = sender as? NSObject else { NSLog("HelloWorldIME: Error - client object is not an NSObject.") return false } NSLog("HelloWorldIME: Successfully cast client to NSObject.") // 2. Now that we have an NSObject, we can safely check if it responds to the selector. let selector = #selector(IMKTextInput.insertText(_:replacementRange:)) if !clientObject.responds(to: selector) { NSLog("HelloWorldIME: Error - client object does not respond to the insertText selector.") return false } NSLog("HelloWorldIME: Client responds to insertText. Preparing to insert text.") // 3. Since we've confirmed it responds, we can now safely treat it as an IMKTextInput // and call the method. let client = clientObject as! IMKTextInput let stringToInsert = "A" let replacementRange = NSRange(location: NSNotFound, length: 0) client.insertText(stringToInsert, replacementRange: replacementRange) NSLog("HelloWorldIME: Called insertText with string '\(stringToInsert)'. Action complete.") // ======================================================== return true } }

Issue Description: When an alarm is set for a time earlier than the current system time, and the system time is manually adjusted back to before the alarm time, the alarm does not ring when the scheduled time is reached. Steps to Reproduce: Current time is 23:34 Set an alarm for 23:30 (earlier than the current time) Manually change the system time to 23:28 Wait until the time reaches 23:30 The alarm does not ring Device: iPhone 14 Pro / iOS 26.2