Hello everyone, I’m currently enrolling as an Organization from Albania and I’ve been stuck on the "Enrolling" status for 8 business days now. I have my D-U-N-S number sorted and everything was submitted. I sent an email last week to the support but I haven't heard back yet. I’ve already sent another support message 2 days ago but no reply so far. I’m curious to hear from others who have enrolled recently (especially in 2026): How long did your organization verification take? Did you receive a verification phone call, or was it just approved via email? For those in the Balkans/Europe, did you have to provide extra local business registry documents (like the QKB extract) manually? I’m trying to time my launch with my Google Play release, so I’m a bit anxious about the "black hole" of waiting. Any experiences or "nudge" tips would be greatly appreciated! Thanks!

Hey everyone, I was wondering if it is possible to access the raw data of the gyroscope and accelerometer of the Airpod 3 pro? I found different answers online - some say I can only get some processed data, but in the Core Motion documentation it reads as it might be possible to get raw data. Any clear answer for this one? Thanks!

Why can I use background delivery to realize background notifications when I run the app for the first time, but when I delete the app running in the background, and then reopen the app to run it in the background, there will be no background notification when the data changes?

I don't understand why elevation data is not stored in the sample using a standard length unit. Why is it stored in HKQuantityTypeIdentifier.flightsClimbed (which is 10 feet)? Surely it is not a memory usage issue. Treadmill GATT provides elevation in meters. Using HKMetadataKeyElevationAscended for the total elevation gain throws away a lot of data. Why is there no support for weighted vest or backpack? Changing body weight is not the same and provides incorrect energy. Users want to compare workouts with different weights. I don't see any metadata key for carried weight.

HealthKit background delivery only triggers when charging. I have set step monitoring to hourly frequency. Despite step changes, callbacks fail to arrive after 3-4 hours on battery, but trigger immediately upon connecting power. Observed for 2 days: background updates are only received when charging. The device is not in Low Power Mode, and Background App Refresh is enabled for the app in Settings.

I'm currently collecting real-time heart rate data using HKWorkoutSession. I want to track when the Apple Watch is physically removed from the user's wrist during an active workout. However, I've noticed that workoutBuilder(_:didCollectDataOf:) continues to be called even after the watch is removed from the wrist. Is there a way to detect when the Apple Watch is removed from the wrist during an active HKWorkoutSession? Or is this tracking not possible through the HealthKit framework? Any guidance or alternative approaches would be appreciated.

Hello everyone, I’m experiencing a visual issue when dismissing a sheet on iOS 26. I’m using the same implementation shown in the official Apple documentation. While testing, I noticed that some apps do not exhibit this behavior. However, when running this code on iOS 26, the issue consistently occurs. Issue description: The sheet dismisses abruptly A white screen briefly appears for a few milliseconds and then disappears This results in a noticeable visual glitch and a poor user experience I tested the exact same code on iOS 18, where the sheet dismisses smoothly and behaves as expected, without any visual artifacts. Has anyone else encountered this issue on iOS 26? Is this a known bug, or is there a recommended workaround? Any insights would be greatly appreciated. Thank you.

I am developing an iOS application that utilizes running workout data from the iOS Health app / Fitness app via HealthKit, with explicit user permission. Before finalizing the app design, I would like to clarify several technical aspects related to data reliability, manual entry, record modification, and GPS route availability in HealthKit. My questions are as follows: 1. Identifying manually added (non-physical) running workouts When a running workout is created in the Health app without actual physical movement (for example, a workout manually added by the user), is there any metadata, flag, or key in HealthKit that allows developers to distinguish these records from workouts generated through actual motion tracking (iPhone or Apple Watch)? 2. Editing existing running workout records Is it possible for users, or for third-party apps with HealthKit write permission, to edit an existing running workout (e.g., distance, duration, calories) after it has been saved? • If edits are allowed, are the original values preserved in any way, or are they fully overwritten? 3. Detecting modified workout records If a running workout (whether originally auto-recorded or manually created) has been edited after creation, is there any identifier, metadata field, source revision, or versioning mechanism in HealthKit that allows developers to detect that the workout has been modified? 4. Access to GPS route / running path data For outdoor running workouts recorded with location services enabled: • Does HealthKit provide access to GPS route data (running paths / location traces) associated with a workout? • Is this route data accessible to third-party apps with user permission? • Is route data available only for workouts recorded on Apple Watch, or also for iPhone-only recordings? • Is there a way to determine programmatically whether a running workout includes valid GPS route data? The overall goal is to understand whether, when building an app that relies on HealthKit running data, it is technically possible to differentiate motion-based workouts from manually added or edited records, and to assess the availability of route information for outdoor runs. Any clarification or references to official documentation would be greatly appreciated. Thank you

I'm developing a watchOS nap app that detects when the user falls asleep by monitoring heart rate changes. == Technical Implementation == HKWorkoutSession (.mindAndBody) for background execution HKAnchoredObjectQuery for real-time heart rate data CoreMotion for movement detection == Battery Considerations == Heart rate monitoring ONLY active when user explicitly starts a session Monitoring continues until user is awakened OR 60-minute limit is reached If no sleep detected within 60 minutes, session auto-ends (user may have abandoned or forgotten to stop) App displays clear UI indicating monitoring is active Typical session: 15-30 minutes, keeping battery usage minimal == The Problem == HKWorkoutSession affects Activity Rings during the session. Users receive "Exercise goal reached" notifications while resting — confusing. == What I've Tried == Not using HKLiveWorkoutBuilder → Activity Rings still affected Using builder but not calling finishWorkout() (per https://developer.apple.com/forums/thread/780220) → Activity Rings still affected WKExtendedRuntimeSession (self-care type) (per https://developer.apple.com/forums/thread/721077) → Only ~10 min runtime, need up to 60 min HKObserverQuery + enableBackgroundDelivery (per https://developer.apple.com/forums/thread/779101) → ~4 updates/hour, too slow for real-time detection Audio background session for continuous processing (suggested in https://developer.apple.com/forums/thread/130287) → Concerned about App Store rejection for non-audio app; if official approves this technical route, I can implement in this direction Some online resources mention "Health Monitoring Entitlement" from WWDC 2019 Session 251, but I could not find any official documentation for this entitlement. Apple Developer Support also confirmed they cannot locate it? == My Question == Is there any supported way to: Monitor heart rate in background for up to 60 minutes WITHOUT affecting Activity Rings or creating workout records? If this requires a special entitlement or API access, please advise on the application process. Or allow me to submit a code-level support request. Any guidance would be greatly appreciated. Thank you!

Hi! I have over 800 days strike in closing my move circle. However oerfect month badge is not popping up for November, we have now mid of Dec and still no update. I updated iOS to 26, did multiple resets and hard resets and still no badge. I checked many forums and post but any of given tips is working in my case. i know it sounds funny, but it’s frustrating that I’m not getting this little gold medal to keep me motivated 😅 does anyone know how to deal with it? Is it common issue?

I am developing a running training app that coaches can use to create interval workout plans. I can use HKWorkout to get information about Splits similar to that in Fitness app, but I can't get information about Intervals. My idea is to show interval details when users view their completed custom interval workout plans. Can I use Healthkit (or another feasible method) to get the actual distance or time of exercise in intervals workout ? (I know the workoutPlan property, but it doesn't reflect the segments of a real interval training workout.) Any insights or suggestions would be greatly appreciated! Thanks in advance!

Was able to use ai to help code my idea for a haptic heart rate monitor using watch se‘s ppg and accelerometer. Now if I could just get it on the App Store…

The second time i start a workout session, the beginCollection instance method on HKLiveWorkoutBuilder freezes. To recreate run the Apple Sample Project Building a multidevice workout app. It looks like a bug with the HealthKit SDK and not the code but i could be wrong. The only workaround i found was erasing the simulator and reinstalling the app.

When calling beginCollection on HKLiveWorkoutBuilder the function never completes and gets stuck. (On the second workout session, the first session works flawlessly) To reproduce: Run the MirroringWorkoutsSample on WatchOS https://developer.apple.com/documentation/healthkit/building-a-multidevice-workout-app. Start the workout and then end the workouts it should work perfectly fine the first time. Start the workout and end again, and you should see the problem, the workout doesn’t end.

I am the developer of a workout app that allows users to create interval programs (e.g. Warm Up, Fast, Cool Down). It is possible for me to store the data for the intervals along with the workout in the Health system by using WorkoutKit (or any other method)? My aim is to make it so that the Fitness app shows the interval details when users view workouts created by my app. Thanks in advance.

I am using this below code since WatchOS 10 to set the user steps observer and get the callback of steps whenever changes. This is still working perfectly fine till watchOS 11 but when i updated to watchOS 26.1, I am not getting the callback of steps, like the observer is not working at all. I should get a callback inside query block whenever user take steps, but it is not working in watchOS 26.1. func setupStepCountObserver(completion: @escaping (Double, Double) -> Void) { let stepCountType = HKObjectType.quantityType(forIdentifier: .stepCount)! let query = HKObserverQuery(sampleType: stepCountType, predicate: nil) { [weak self] _, completionHandler, error in if let error = error { print("Error setting up observer query: \(error.localizedDescription)") return } // Fetch the latest step count data self?.getLast20SecTodaysSteps(completion: completion) // Call the completion handler to let HealthKit know you have processed the update completionHandler() } // Execute the query healthStore.execute(query) // Enable background delivery of updates healthStore.enableBackgroundDelivery(for: stepCountType, frequency: .immediate) { success, error in if let error = error { print("Error enabling background delivery steps: \(error.localizedDescription)") } else if success { print("Background delivery enabled for steps.") } } }

Hi everyone, we’re developing an app that lets users export selected bike rides to the HealthKit ecosystem. We created our app icon using the Apple Icon Composer and referenced the composer file in Xcode. Everything works fine, except that the logo doesn’t appear correctly in the Fitness app. Has anyone experienced this issue or knows how to fix it?

Ever since upgrading to OS 26.1, I've noticed that HealthKit anchored object queries seem to be much slower-updating than normal. I was curious if Apple stated anything explicitly changed on this front? I use anchored object queries to update some of the workout metrics that HKLiveWorkoutBuilder doesn't report (like stepCount).

Can’t get the live data from ppg sensor (se os 26.x) for 0 latency parsing of haptics per each pulse (heart beat). any help would be cool. b

I am working on a cycling fitness app and I want to read the cycling power recorded using my Garmin edge from the Garmin Connect App. Currently the data is not transferred to the Health/Fitness Apps. Ideally it would be good to be able to query the power samples similar to the heart rate samples, but even the average power would suffice, as I could then calculate the Kilojoules.