hi everybody, When I use the following code to connect to WiFi network, an error message of "error=null" or "error='Error Domain=NEHotspotConfigurationErrorDomain Code=11 "" UserInfo={NSLocalizedDescription=}' " will occur. It has been uploaded to Feedback. Feedback ID： FB16819345 (WiFi-无法加入网络) NEHotspotConfiguration *hotspotConfig = [[NEHotspotConfiguration alloc] initWithSSID:ssid passphrase:psk isWEP:NO]; [[NEHotspotConfigurationManager sharedManager] applyConfiguration:hotspotConfig completionHandler:^(NSError * _Nullable error) { }];

I am looking for a lightweight server that can run inside an app. The key requirement is that it must support local IP communication over HTTPS. I have searched Google and found several frameworks, but as far as I know, support for HTTPS in this environment has been discontinued or is no longer available. If anyone knows a solution that meets these criteria, I would greatly appreciate your guidance. Thank you in advance!😀

[Q] Has there been a change in macOS 15.3.2 and later that can explain why some UDP traffic is not seen by some Network Extensions when it is in previous macOS minor and major versions?

Hello Everyone, I’m working on a project that involves multicast communication between processes running on different devices within the same network. For all my Apple devices (macOS, iOS, etc.), I am using NWConnectionGroup, which listens on a multicast address "XX.XX.XX.XX" and a specific multicast port. The issue occurs when a requestor (such as a non-Apple process) sends a multicast request, and the server, which is a process running on an Apple device using NWConnectionGroup (the responder), attempts to reply. The problem is that the response is sent from a different ephemeral port rather than the port on which the multicast request was received. If the client is behind a firewall that blocks unsolicited traffic, the firewall only allows incoming packets on the same multicast port used for the initial request. Since the multicast response is sent from a different ephemeral port, the firewall blocks this response, preventing the requestor from receiving it. Questions: Is there a recommended approach within the NWConnectionGroup or Network.framework to ensure that responses to multicast requests are sent from the same port used for the request? Are there any best practices for handling multicast responses in scenarios where the requestor is behind a restrictive firewall? Any insights or suggestions on how to account for this behavior and ensure reliable multicast communication in such environments would be greatly appreciated. Thanks, Harshal

There is a problem with the Apple local network setting api, iOS18 system, you turn off the local network permissions of the APP, uninstall the APP, and then re-install, the local network permissions even if opened, there is no effect, only restart the phone is useful

For a long time our app had this creation of a URLRequest: var urlRequest = URLRequest(url: url, cachePolicy: .reloadIgnoringLocalAndRemoteCacheData, timeoutInterval: timeout) But since iOS 26 was released we started to get crashes in this call. It is created on a background thread. Thread 10 Crashed: 0 libsystem_malloc.dylib 0x00000001920e309c _xzm_xzone_malloc_freelist_outlined + 864 (xzone_malloc.c:1869) 1 libswiftCore.dylib 0x0000000184030360 swift::swift_slowAllocTyped(unsigned long, unsigned long, unsigned long long) + 56 (Heap.cpp:110) 2 libswiftCore.dylib 0x0000000184030754 swift_allocObject + 136 (HeapObject.cpp:245) 3 Foundation 0x00000001845dab9c specialized _ArrayBuffer._consumeAndCreateNew(bufferIsUnique:minimumCapacity:growForAppend:) + 120 4 Foundation 0x00000001845daa58 specialized static _SwiftURL._makeCFURL(from:baseURL:) + 2288 (URL_Swift.swift:1192) 5 Foundation 0x00000001845da118 closure #1 in _SwiftURL._nsurl.getter + 112 (URL_Swift.swift:64) 6 Foundation 0x00000001845da160 partial apply for closure #1 in _SwiftURL._nsurl.getter + 20 (<compiler-generated>:0) 7 Foundation 0x00000001845da0a0 closure #1 in _SwiftURL._nsurl.getterpartial apply + 16 8 Foundation 0x00000001845d9a6c protocol witness for _URLProtocol.bridgeToNSURL() in conformance _SwiftURL + 196 (<compiler-generated>:974) 9 Foundation 0x000000018470f31c URLRequest.init(url:cachePolicy:timeoutInterval:) + 92 (URLRequest.swift:44)# Live For Studio Any idea if this crash is caused by our code or if it is a known problem in iOS 26? I have attached one of the crash reports from Xcode: 2025-10-08_10-13-45.1128_+0200-8acf1536892bf0576f963e1534419cd29e6e10b8.crash

When i try to set the value ‘false’ for ‘usesClassicLoadingMode’ it is getting crashed. The crash logs has been shared below Ex: let config = URLSessionConfiguration.default if #available(iOS 18.4, *) { config.usesClassicLoadingMode = false } Error log : *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[__NSCFBoolean objectForKeyedSubscript:]: unrecognized selector sent to instance 0x1f655c390' *** First throw call stack: (0x188ae52ec 0x185f69a7c 0x188b4f67c 0x1889fcb84 0x1889fc4f0 0x191393bc8 0x1889ec8a0 0x1889ec6e4 0x191393ad0 0x191344dac 0x191344b58 0x107cfa064 0x107ce36d0 0x191343fcc 0x1891b3b18 0x1892dae58 0x189235c60 0x18921e270 0x18921d77c 0x18921a8ac 0x107ce0584 0x107cfa064 0x107ce891c 0x107ce95d8 0x107ceabcc 0x107cf5894 0x107cf4eb0 0x212f51660 0x212f4e9f8) terminating due to uncaught exception of type NSException Can you please provider the resolution steps

I'm trying to invoke a 3rd party command line tool from a launch agent to connect to a server on my LAN. It seems impossible. I have a little shell script that does what I need, and it works fine invoked in Terminal.app. The first time I run it that way I get permission prompts and I agree to them all. Subsequent invocations work. Now I put a launch agent in ~/Library/Launch Agents. It does nothing more than invoke my shell script at some specific time daily. launchd launches it, but it fails to access the LAN, with a 'no route to host' error message. The command line tool I'm trying to use is not a macOS-provided one, but one from MacPorts/HomeBrew (I tried both). It doesn't even matter which tool I'm using, I tried a very simple case of just using nc/netcat. If I use the macOS-provided nc, then I can access my LAN. If I install nc from MacPorts /HomeBrew, that nc cannot access my LAN. This I've reproed on a literally brand new Mac, then updated to newest Sequoia (15.3.2), then done all I've described above. I've ruled out DNS by working with raw IP addresses. I've disabled gatekeeper with sudo spctl --master-disable. I've tried using cron instead of launch agents, same results. I've tried codesigning with codesign -dvvv /opt/homebrew/bin/nc, no help. I've read TN3179 Understanding local network privacy. In summary: Terminal.app -> script -> macOS/brew nc -> internet/LAN = works launchagent -> script -> macOS nc -> internet = works launchagent -> script -> macOS nc -> LAN = works launchagent -> script -> brew nc -> internet = works launchagent -> script -> brew nc -> LAN = fails How can I make that last case work?

I am looking for inputs to better understand MacOS entitlements. I ask this in context of OpenJDK project, which builds and ships the JDK. The build process makes uses of make tool and thus doesn't involving building through the XCode product. The JDK itself is a Java language platform providing applications a set of standard APIs. The implementation of these standard APIs internally involves calling platform specific native library functions. In this discussion, I would like to focus on the networking functions that the implementation uses. Almost all of these networking functions and syscalls that the internal implementation uses are BSD socket related. Imagine calls to socket(), connect(), getsockopt(), setsockopt(), getaddrinfo(), sendto(), listen(), accept() and several such. The JDK that's built through make is then packaged and made available for installation. The packaging itself varies, but for this discussion, I'll focus on the .tar.gz archived packaging. Within this archive there are several executables (for example: java, javac and others) and several libraries. My understanding, based on what I have read of MacOS entitlements is that, the entitlements are set on the executable and any libraries that would be loaded and used by that executable will be evaluated against the entitlements of the executable (please correct me if I misunderstand). Reading through the list of entitlements noted here https://developer.apple.com/documentation/bundleresources/entitlements, the relevant entitlements that an executable (like "java") which internally invokes BSD socket related syscalls and library functions, appear to be: com.apple.security.network.client - https://developer.apple.com/documentation/bundleresources/entitlements/com.apple.security.network.client com.apple.security.network.server - https://developer.apple.com/documentation/bundleresources/entitlements/com.apple.security.network.server com.apple.developer.networking.multicast - https://developer.apple.com/documentation/bundleresources/entitlements/com.apple.developer.networking.multicast Is my understanding correct that these are the relevant ones for MacOS? Are there any more entitlements that are of interest? Would it then mean that the executables (java for example) would have to enroll for these entitlements to be allowed to invoke those functions at runtime? Reading through https://developer.apple.com/documentation/bundleresources/entitlements, I believe that even when an executable is configured with these entitlements, when the application is running if that executable makes use of any operations for which it has an entitlement, the user is still prompted (through a UI notification) whether or not to allow the operation. Did I understand it right? The part that isn't clear from that documentation is, if the executable hasn't been configured with a relevant entitlement, what happens when the executable invokes on such operation. Will the user see a UI notification asking permission to allow the operation (just like if an entitlement was configured)? Or does that operation just fail in some behind the scenes way? Coming back to the networking specific entitlements, I found a couple of places in the MacOS documentation where it is claimed that the com.apple.developer.networking.multicast entitlement is only applicable on iOS. In fact, the entitlement definition page for it https://developer.apple.com/documentation/bundleresources/entitlements/com.apple.developer.networking.multicast says: "Your app must have this entitlement to send or receive IP multicast or broadcast on iOS. It also allows your app to browse and advertise arbitrary Bonjour service types." Yet, that same page, a few lines above, shows "macOS 10.0+". So, is com.apple.developer.networking.multicast entitlement necessary for an executable running on MacOS which deals with multicasting using BSD sockets? As a more general comment about the documentation, I see that the main entitlements page here https://developer.apple.com/documentation/bundleresources/entitlements categorizes some of these entitlements under specific categories, for example, notice how some entitlements are categorized under "App Clips". I think it would be useful if there was a category for "BSD sockets" and under that it would list all relevant entitlements that are applicable, even if it means repeating the entitlement names across different categories. I think that will make it easier to identify the relevant entitlements. Finally, more as a long term question, how does one watch or keep track of these required entitlements for these operations. What I mean is, is it expected that application developers keep visiting the macos documentation, like these pages, to know that a new entitlement is now required in a new macos (update) release? Or are there other ways to keep track of it? For example, if a newer macos requires a new entitlement, then when (an already built) executable is run on that version of macos, perhaps generate a notification or some kind of explicit error which makes it clear what entitlement is missing? I have read through https://developer.apple.com/documentation/bundleresources/diagnosing-issues-with-entitlements but that page focuses on identifying such issues when a executable is being built and doesn't explain the case where an executable has already been shipped with X entitlements and a new Y entitlement is now required to run on a newer version of macos.

Background Android phones supporting Wi-Fi Aware 4.0 should be able to connect with iPhones (iOS 26). For testing, we selected two Samsung S25 devices, which support Wi-Fi Aware 4.0. Issues we are facing Android as Publisher, iOS as Subscriber.iOS cannot discover the service. Log shows: Discovery: Dropping event, 02:14:60:76:a6:0f missing DCEA attribute. iOS as Publisher, Android as Subscriber,Android can discover the service.However, the PIN code is not displayed on iOS. From the packet capture, the publish packet does not contain the DCEA field. However, Android-to-Android devices can still pair normally, and the subsequent PASN packets include the DCEA field. It seems that the Wi-Fi Alliance only requires the DCEA to be present in the PASN packets. iOS cannot discover Android devices or complete pairing — is this caused by the DCEA field, or by other reasons?

I've been wondering what is the memory limit for network extensions. Specifically, I'm using the NEPacketTunnelProvider extension point.The various posts on this forum mention 5 MB and 6 MB for 32-bit and 64-bit respectively. However I find that (at least on iOS 10) the upper limit seems to be 15 MB. Is this the new memory limit for extensions?

I can develop a PacketTunnelProvider on Mac with xcode. I work with my self codesign. But when I sign it with Developer ID after read https://developer.apple.com/forums/thread/737894 , it still fail when I turn on the vpn .

Hello, Title states it basically. I have a java program (launched via shell script) running as a service using launchd which is running as a user (not root) and it does not request Local Network permissions ever. I feel like i'm missing something here. I combed through all of the Local Network FAQs and don't really see this use case addressed. I do see that there is an open ticket for an API to trigger the request, but no update on that and the ticket is not visible publicly. Is there is a way to accomplish this for java or other programs running via launchd with a user other than root? something like an entitlement or an API to seed the permission of Local Network when installing the service via launchctl etc?

When a VPN is active, RCS messaging does not work on iOS 18. I work on an iOS VPN app, and we were very appreciative of the excludeCellularServices network flag that was released during the iOS 16 cycle. It's a great solution to ensure the VPN doesn't interfere with cellular network features from the cellular provider. Separately - As a user, I'm excited that iOS 18 includes RCS messaging. Unfortunately, RCS messaging is not working when our VPN is active (when checking on the iOS 18 release candidate). My guess is that RCS is not excluded from the VPN tunnel, even when excludeCellularServices is true. It seems like RCS should be added in this situation, as it is a cell provider service. Can RCS be added as a service that is excluded from the VPN tunnel when excludeCellularServices is true? (I've also sent this via feedback assistant, as 15094270.)

There are multiple report of crashes on URLConnectionLoader::loadWithWhatToDo. The crashed thread in the stack traces pointing to calls inside CFNetwork which seems to be internal library in iOS. The crash has happened quite a while already (but we cannot detect when the crash started to occur) and impacted multiple iOS versions recorded from iOS 15.4 to 18.4.1 that was recorded in Xcode crash report organizer so far. Unfortunately, we have no idea on how to reproduce it yet but the crash keeps on increasing and affect more on iOS 18 users (which makes sense because many people updated their iOS to the newer version) and we haven’t found any clue on what actually happened and how to fix it on the crash reports. What we understand is it seems to come from a network request that happened to trigger the crash but we need more information on what (condition) actually cause it and how to solve it. Hereby, I attach sample crash report for both iOS 15 and 18. I also have submitted a report (that include more crash reports) with number: FB17775979. Will appreciate any insight regarding this issue and any resolution that we can do to avoid it. iOS 15.crash iOS 18.crash

iPhone 12 pro with iOS 26.0 (23A5276f) App: https://developer.apple.com/documentation/wifiaware/building-peer-to-peer-apps We aim to use Wi-Fi Aware to establish file transfer between Android and Apple devices. Apple will act as the Publisher, and Android will act as the Subscriber. According to the pairing process outlined in the Wi-Fi Aware protocol (Figure 49 in the Wi-Fi Aware 4.0 specification), the three PASN Authentication frames have been successfully exchanged. Subsequently, Android sends the encrypted Follow-up PMF to Apple, but the Apple log shows: Failed to parse event. Please refer to the attached complete log. We request Apple to provide a solution. apple Log-20250808a.txt

I implemented a Network Extension in the macOS, use NETransparentProxyProvider. After installing and enabling it, I implemented a UDP client to test its. I found that the UDP client failed to send the data successfully (via sendto, and it returned a success), and when using Wireshark to capture the network data packet, I still couldn't see this UDP data packet. The code for Network Extension is like this: @interface MyTransparentProxyProvider : NETransparentProxyProvider @end @implementation MyTransparentProxyProvider - (void)startProxyWithOptions:(NSDictionary *)options completionHandler:(void (^)(NSError *))completionHandler { NETransparentProxyNetworkSettings *objSettings = [[NETransparentProxyNetworkSettings alloc] initWithTunnelRemoteAddress:@"127.0.0.1"]; // included rules NENetworkRule *objIncludedNetworkRule = [[NENetworkRule alloc] initWithRemoteNetwork:nil remotePrefix:0 localNetwork:nil localPrefix:0 protocol:NENetworkRuleProtocolAny direction:NETrafficDirectionOutbound]; NSMutableArray<NENetworkRule *> *arrIncludedNetworkRules = [NSMutableArray array]; [arrIncludedNetworkRules addObject:objIncludedNetworkRule]; objSettings.includedNetworkRules = arrIncludedNetworkRules; // apply [self setTunnelNetworkSettings:objSettings completionHandler: ^(NSError * _Nullable error) { // TODO } ]; if (completionHandler != nil) completionHandler(nil); } - (BOOL)handleNewFlow:(NEAppProxyFlow *)flow { if (flow == nil) return NO; char szProcPath[PROC_PIDPATHINFO_MAXSIZE] = {0}; audit_token_t *lpAuditToken = (audit_token_t*)flow.metaData.sourceAppAuditToken.bytes; if (lpAuditToken != NULL) { proc_pidpath_audittoken(lpAuditToken, szProcPath, sizeof(szProcPath)); } if ([flow isKindOfClass:[NEAppProxyTCPFlow class]]) { NWHostEndpoint *objRemoteEndpoint = (NWHostEndpoint *)((NEAppProxyTCPFlow *)flow).remoteEndpoint; LOG("-MyTransparentProxyProvider handleNewFlow:] TCP flow! Process: (%d)%s, %s Remote: %s:%s, %s", lpAuditToken != NULL ? audit_token_to_pid(*lpAuditToken) : -1, flow.metaData.sourceAppSigningIdentifier != nil ? [flow.metaData.sourceAppSigningIdentifier UTF8String] : "", szProcPath, objRemoteEndpoint != nil ? (objRemoteEndpoint.hostname != nil ? [objRemoteEndpoint.hostname UTF8String] : "") : "", objRemoteEndpoint != nil ? (objRemoteEndpoint.port != nil ? [objRemoteEndpoint.port UTF8String] : "") : "", ((NEAppProxyTCPFlow *)flow).remoteHostname != nil ? [((NEAppProxyTCPFlow *)flow).remoteHostname UTF8String] : "" ); } else if ([flow isKindOfClass:[NEAppProxyUDPFlow class]]) { NSString *strLocalEndpoint = [NSString stringWithFormat:@"%@", ((NEAppProxyUDPFlow *)flow).localEndpoint]; LOG("-[MyTransparentProxyProvider handleNewFlow:] UDP flow! Process: (%d)%s, %s LocalEndpoint: %s", lpAuditToken != NULL ? audit_token_to_pid(*lpAuditToken) : -1, flow.metaData.sourceAppSigningIdentifier != nil ? [flow.metaData.sourceAppSigningIdentifier UTF8String] : "", szProcPath, strLocalEndpoint != nil ? [strLocalEndpoint UTF8String] : "" ); } else { LOG("-[MyTransparentProxyProvider handleNewFlow:] Unknown flow! Process: (%d)%s, %s", lpAuditToken != NULL ? audit_token_to_pid(*lpAuditToken) : -1, flow.metaData.sourceAppSigningIdentifier != nil ? [flow.metaData.sourceAppSigningIdentifier UTF8String] : "", szProcPath ); } return NO; } @end The following methods can all enable UDP data packets to be successfully sent to the UDP server: 1.In -[MyTransparentProxyProvider startProxyWithOptions:completionHandler:], add the exclusion rule "The IP and port of the UDP server, the protocol is UDP"; 2.In -[MyTransparentProxyProvider startProxyWithOptions:completionHandler:], add the exclusion rule "All IPs and ports, protocol is UDP"; 3.In -[MyTransparentProxyProvider handleNewFlow:] or -[MyTransparentProxyProvider handleNewUDPFlow:initialRemoteEndpoint:], process the UDP Flow and return YES. Did I do anything wrong?

I am trying to setup a system-wide DNS-over-TLS for iOS that can be turned off and on from within the app, and I'm struggling with the implementation details. I've searched online, searched forums here, used ChatGPT, and I'm getting conflicting information or code that is simply wrong. I can't find example code that is valid and gets me moving forward. I think I need to use NEDNSProxyProvider via the NetworkExtension. Does that sound correct? I have NetworkExtension -> DNS Proxy Capability set in both the main app and the DNSProxy extension. Also, I want to make sure this is even possible without an MDM. I see conflicting information, some saying this is opened up, but things like https://developer.apple.com/documentation/Technotes/tn3134-network-extension-provider-deployment saying a device needs to be managed. How do private DNS apps do this without MDM? From some responses in the forums it sounds like we need to parse the DNS requests that come in to the handleNewFlow function. Is there good sample code for this parsing? I saw some helpful information from Eskimo (for instance https://developer.apple.com/forums/thread/723831 ) and Matt Eaton ( https://developer.apple.com/forums/thread/665480 )but I'm still confused. So, if I have a DoT URL, is there good sample code somewhere for what startProxy, stopProxy, and handleNewFlow might look like? And valid code to call it from the main app?

Problem : Connection error occurs in iOS26 beta while connecting to the device's softap via commercial app (Socket exception errSSLfeerBadCert CFSreamErrorDomainSSL code -9825). iOS 18 release version does not occur. Why does it cause problems? Does the iOS 26 version not cause problems? Is there a way to set it up in the app so that the iOS 26 beta doesn't cause problems? error : "alias":"SOCKET_LOG", "additional":{"currentNetworkStatus":"socket e=errSSLPeerBadCert ns WifiStatus: Connected Error Domain kCFStreamErrorDomainSSL Code-9825 "(null)" UserInfo={NSLocalizedRecoverySuggestion=Error code definition can be found in Apple's SecureTransport.h} Description : It's an issue that happens when you connect our already mass-produced apps to our home appliances (using SoftAP), and it's currently only happening in iOS 26 beta. This particular issue didn't appear until iOS 18 version. Let me know to make sure that this issue will persist with the official release of iOS 26? If the issue continues to occur with the official version, would you share any suggestions on how to mitigate or avoid it. Also, it would be helpful to find out if there are known solutions or processes such as exemptions to fix this issue.

Recently, we have observed that after upgrading to OS 15.4.1, some devices are experiencing network issues. We are using a Network Extension with a transparent app proxy in our product. The user encounters this issue while using our client, but the issue persists even after stopping the client app. This appears to be an OS issue. Below is the sytem logs. In the system logs, it says [C669.1 Hostname#546597df:443 failed transform (unsatisfied (No network route), flow divert agg: 2)] event: transform:children_failed @0.001s In scutil --dns, it says not reachble. DNS configuration resolver #1 flags : reach : 0x00000000 (Not Reachable) resolver #2 domain : local options : mdns timeout : 5 flags : reach : 0x00000000 (Not Reachable) order : 300000 resolver #3 domain : 254.169.in-addr.arpa options : mdns timeout : 5 flags : reach : 0x00000000 (Not Reachable) order : 300200 resolver #4 domain : 8.e.f.ip6.arpa options : mdns timeout : 5 flags : reach : 0x00000000 (Not Reachable) order : 300400 resolver #5 domain : 9.e.f.ip6.arpa options : mdns timeout : 5 flags : reach : 0x00000000 (Not Reachable) order : 300600 resolver #6 domain : a.e.f.ip6.arpa options : mdns timeout : 5 flags : reach : 0x00000000 (Not Reachable) order : 300800 resolver #7 domain : b.e.f.ip6.arpa options : mdns timeout : 5 flags : reach : 0x00000000 (Not Reachable) order : 301000 We need to restart the system to recover from the issue.