Can I using AudioServicesPlaySystemSound for play sound os system on NotificationService?

When User restarted iOS device, after powering on iOS App is not able to get VoIP push notification. If user opens App, immediate VoIP push receiving. In Normal (App Kill or Background state) everything works as expected. Issue is when device is powered on and immediately( In 1-2 mins) try to call on device. We are using delegate to show Call to User public func pushRegistry(_ registry: PKPushRegistry, didReceiveIncomingPushWith payload: PKPushPayload, for type: PKPushType, completion: @escaping () -> Void)

I'm sending push notifications to a notification extension, and within the extension setting the threadIdentifier to be the same. But I'm observing inconsistent grouping behaviour, and behaviour that changes over time. The general iPhone settings are to display notifications as a Stack, and the app settings are to show on lock screen, notification center and banners and the notification grouping is set to by app (changing it to automatic doesn't affect the behaviour below). Pushes are displayed on the lock screen grouped together, then if the device is roused and the screen swiped down to reveal the notification center then they are still grouped. So far so good. If the iphone is active then the notifications appear at the top of the screen, one by one, but in this case if there is a swipe down to reveal the notification center then the notifications are not grouped when displayed, but shown individually. But then if one waits a few minutes and then displays the notification center for a 2nd time, sometimes now they will be grouped, but sometimes not. Why are they not (always) being displayed as grouped in the notification center?

We are currently planning the development of an iOS healthcare application that will require the use of Critical Alerts. I understand that these notifications bypass Do Not Disturb and Silent mode, and therefore require special entitlement from Apple. We understand that Critical Alerts require a special entitlement from Apple. Could you please clarify: Do we need to request and obtain Apple’s approval for Critical Alerts before we begin development of the app? Or can we apply for this entitlement after we have a working build or prototype ready? We want to ensure compliance and streamline our development process, so any guidance on the appropriate timing for the entitlement request would be greatly appreciated.

Background: The project was created in Xcode 5, then recreated in new Xcode. Before migration, push notifications worked without issues, after migration device token stopped being extracted. Problem: iOS app registers for push notifications, but didRegisterForRemoteNotificationsWithDeviceToken or didFailToRegisterForRemoteNotificationsWithError methods are not being called. Current situation: App is registered for push notifications (isRegisteredForRemoteNotifications = true) Notification permissions are granted Entitlements are configured correctly (aps-environment: development) Bundle ID: com.autoserviceonline.app Team: BUSINESSVISION COMPANY, TOO (NS3FSG45V7) But callback methods are not being called What I've already tried: Deleted and recreated all App IDs in Apple Developer Portal Cleared Xcode cache and derived data Created new APNs certificates and provisioning profiles Removed "ghost" certificate from Keychain Access Problem persists Additional information: Also noticed that Push Notifications Console opens non-existent project "BV.TestSwiftData" with Personal Team instead of current corporate App ID com.autoserviceonline.app. These issues might be related to project migration from old Xcode. Request: Why iOS doesn't call callback methods for device token, although registration was successful?

Hi All, im working on a project to send a push notification in CarPlay. Current accepted by apple entitlements is driving. Are custom actions / buttons allowed/supported in CarPlay notifications?

I created an app. One if its functionalities is receive Remote Notification in the background, while app is monitoring Significant Location Changes (SLC). This functionality worked fine. I was receiving these notifications correctly. Sometimes instantly, sometime with small or large delay. And then I send the app for review. It was rejected with 3 remarks: The app or metadata includes information about third-party platforms that may not be relevant for App Store users, who are focused on experiences offered by the app itself (I wrote that app communication works both for iOS and Android.) The app declares support for audio in the UIBackgroundModes key in your Info.plist but we are unable to locate any features that require persistent audio. EULA (End User License Agreement) is missing for in-app purchases. After the rejection the app is no longer receiving these notifications. They are there, since the app receives them, when I open app, or significant location change is detected. It also works, when I run the app directly from Xcode (in debug mode), not from TestFlight nor in Sandbox. It seem to me like Apple somehow spoiled my background capabilities on purpose or accidentally. Is it possible? What can I do with it? Is it the case that I should just fix the review remarks and send the app back to review, and once the app passes it, it will work again? Or should I not count on it? Any suggestions? I asked Apple using: https://developer.apple.com/contact/topic/#!/topic/select but so far no response.

We have implemented Carplay in our voip based project and in this we have implemented Incoming call and chat notification feature for Carplay. For Carplay we implemented siri. Siri Object donated Successfully in Notification service Extension when notification didreceive method called. Donation Code :- func donateIncomingMessageIntent(sender: String, senderId: String, message: String, messageId: String, userInfo: [AnyHashable: Any],destination:String) { // Create proper name components clearAllinteraction() var nameComponents = PersonNameComponents() nameComponents.givenName = sender //unknown let senderPerson = INPerson( personHandle: INPersonHandle(value: senderId, type: .unknown), nameComponents: nameComponents, displayName: sender, image: nil, contactIdentifier: senderId, customIdentifier: "sender_\(senderId)" ) let recipientPerson = INPerson( personHandle: INPersonHandle(value: "me@example.com", type: .emailAddress), nameComponents: nil, displayName: "Me", image: nil, contactIdentifier: "me_id", customIdentifier: "user_id" ) let inMessage = INMessage( identifier: messageId, conversationIdentifier: "conversation_\(senderId)", content: message, dateSent: Date(), sender: senderPerson, recipients: [recipientPerson], groupName: nil, messageType: .text ) let intent = INSearchForMessagesIntent( recipients: [recipientPerson], senders: [senderPerson], searchTerms: [message], attributes: .unread, dateTime: nil, identifiers: [messageId], notificationIdentifiers: [messageId], groupNames: ["Messages"] ) let interaction = INInteraction(intent: intent, response: nil) interaction.identifier = "message_\(messageId)" interaction.direction = .incoming // Add direction DispatchQueue.global(qos: .userInitiated).async { interaction.donate { error in if let error = error { print("❌ Failed to donate INSearchForMessagesIntent: \(error.localizedDescription)") } else { print("✅ Donated INSearchForMessagesIntent successfully!") let intentData: [String: Any] = [ "senderName": sender, "senderId": senderId, "message": message, "messageId": messageId, "timestamp": Date().timeIntervalSince1970, "conversationId": "conversation_\(senderId)", // Add conversationId "destination":destination ] let defaults = UserDefaults(suiteName: "group.com.chatapp") // 🔁 Use your App Group ID defaults?.removeObject(forKey: "lastCarPlayIntentData") defaults?.set(intentData, forKey: "lastCarPlayIntentData") defaults?.synchronize() } } } } Here SenderID is like 3000@abc,2000@abc etc. In siri ,When we handle INSearchForMessagesIntent at that time all data getting from Userdefaults because without Userdefaults INSearchForMessagesIntent value nil. Even we enabled announcement using .allowAnnouncement. We also tried to save same sender in contact Book because sometime siri search contact and not found then may be raise this type of issue. So we need code level support for read incoming message in carplay when notification comes. Thank you.

The iOS documentation shows notification actions buttons with the text center aligned: https://developer.apple.com/documentation/usernotifications/declaring-your-actionable-notification-types But there's no apparent way for an app to control this. The buttons are controlled and rendered by the system and the text is always left aligned. Is there some way to get the text center aligned?

I am checking if the user taps on the firebase push notification and get the payload. override func userNotificationCenter(_ center: UNUserNotificationCenter, didReceive response: UNNotificationResponse, withCompletionHandler completionHandler: @escaping () -> Void) { let userInfo = response.notification.request.content.userInfo os_log("notification tapped %{public}@", log: OSLog.push, type: .info, userInfo) handleNotificationPayload(userInfo as! [String: AnyObject]) setFlutterLinkClickedVariable() } My use case is in app terminated state when push notification is tapped, get the link from payload and navigate to corresponding screen based on the link. This is working when there is only one push notification. When there are multiple push notifications with different links in the payload, only the first notification I tap works. Rest of the notifications just launches the app and does not navigate because the link is not set. I am getting the link from the payload and invoking flutter code which sets the link in the user defaults (shared preferences) and when the app launches in the home screen it checks for this variable and navigates accordingly. func handleNotificationPayload(_ payload: [String: AnyObject]) { if let link = payload["link"] as? String { setFlutterLinkVariable(link) } } override func application(_ application: UIApplication, didReceiveRemoteNotification userInfo: [AnyHashable : Any], fetchCompletionHandler completionHandler: @escaping (UIBackgroundFetchResult) -> Void) { os_log("app did receive remote notification %{public}@", log: OSLog.push, type: .info, userInfo) handleNotificationPayload(userInfo as! [String : AnyObject]) completionHandler(.newData) } Currently when there is only one push notification it works because the link is set from the above method. The click delegate is not calling. I did set the delegate in application(:didFinishLaunchingWithOptions). UNUserNotificationCenter.current().delegate = self application.registerForRemoteNotifications() How to solve this issue? Thanks.

I have my app configured as a Driving Task app with the entitlement and provisioning profile correctly set up. I am also requesting the ".carPlay" notification authorization option and setting up the carplay notification category with the ".allowInCarPlay" category, both without error. When testing with the iPhone and carplay simulators the user notifications I send are appearing on the phone but not in carplay. When I check the notification settings with UNUserNotificationCenter.current().getNotificationSettings() I see that carplay is shown to be not supported ("carPlaySetting: NotSupported"). The CarPlay Developer Guide 2025-06-09 (which is the version currently referenced in the Apple docs) states that "Starting in iOS 18.4, notifications are also supported in CarPlay driving task apps". Has this discrepancy been addressed anywhere, or is this an open issue? My software versions: MacOS: Sequoia 15.6 XCode: 16.4 iPhone Simulator: iPhone 16 with iOS 18.6

Good day We developed a simple swift code to make the device ringing when a certain type of notifications arrives from our backend. This is the code: let phoneNumber = CXHandle(type: .generic, value: (self.userInfoForPluginCall!["data"] as! [String:Any]) ["caller"] as! String) callUpdate.remoteHandle = phoneNumber let configuration = CXProviderConfiguration(localizedName: "Trec Conf") configuration.maximumCallGroups = 1 configuration.maximumCallsPerCallGroup = 1 configuration.supportsVideo = false configuration.supportedHandleTypes = [.generic] configuration.iconTemplateImageData = UIImage(named: "callkit-icon")?.pngData() let callProvider = CXProvider(configuration: configuration) callProvider.setDelegate(self, queue: nil) callProvider.reportNewIncomingCall(with: callUUID!, update: callUpdate, completion: {error in}) We are noticing some problems on the call screen: on certain devices (iOS 18.4RC) the normal call screen appears and the user can answer or decline the call, on other devices (iOS 18.3, especially with dynamic island) only a phone icon appears in the upper right corner and no possibility to answer or deny call. Any idea on why we are encountering that behavior? Thanks

I am creating an app that uses critical messages, I have been granted this entitlement and I am adding the certificate and in the info.plist. In the app I request authorization to send messages to specific numbers. When I try the app in production from Xcode this works fine and I can send the critical messages. However, when I am using the app in the test flight the authorization does not seem to be remembered on the background. Moreover, I go to security/privacy settings and I grant permission to the selected number (I see that it only shows one number even when I have to granted, its like it removes the previous one) however when I exit the setting page the permission is reset (and therefore denied), I think this is a bug. Can you look into that. Both this removing granted permission (HIGH PRIORITY, this message can only be sent in the background, therefore the user can not grant it and why the maximum telephone number to be granted to send messages is reset also to a single one LOWER PRIORITY). Thanks

Hi everyone, We're experiencing an issue with our Flutter app that uses PushKit, CallKit, and Janus for handling VoIP calls. Everything works fine when the app is in the foreground, but when the app is in the background or completely closed (terminated state), the behavior is inconsistent: Sometimes, incoming calls are received as expected. Other times, the app does nothing, and the call is not delivered at all. Upon checking the console logs, we noticed that our app is being canceled (terminated by the system), which seems to be the reason why calls are not coming through. This happens randomly, making it difficult to reproduce consistently. Additional Details: The app is configured to handle VoIP notifications correctly. We are using PushKit to wake up the app and trigger CallKit for the incoming call UI. When the app is active, calls are handled correctly via Janus WebRTC signaling. We have verified that background modes for VoIP are enabled in the Info.plist. We suspect that iOS may be aggressively killing the app in the background, preventing incoming call notifications from reaching it. Questions: Has anyone experienced similar behavior with PushKit + CallKit on recent iOS versions? Could iOS be terminating the app due to background execution policies? Are there recommended best practices to ensure reliable delivery of VoIP notifications when the app is closed? Any insights or suggestions would be greatly appreciated! Thanks! Addional Information: this is the cancellation information at console: Received incoming message on topic hiperme.app at priority 10 por omisión 17:10:18.462084-0300 dasd CANCELED: com.apple.pushLaunch.hiperme.app:E8BACD at priority 10

After porting code to Swift 6 (Xcode 16.4), I get a consistent crash (on simulator) when using UNUserNotificationServiceConnection It seems (searching on the web) that others have met the same issue. Is it a known Swift6 bug ? Or am I misusing UNUserNotification ? I do not have the crash when compiling on Xcode 26 ß5, which hints at an issue in Xcode 16.4. Crash log: Thread 10 Queue : com.apple.usernotifications.UNUserNotificationServiceConnection.call-out (serial) As far as I can tell, it seems error is when calling nonisolated func userNotificationCenter(_ center: UNUserNotificationCenter, willPresent notification: UNNotification, withCompletionHandler completionHandler: @escaping (UNNotificationPresentationOptions) -> Void) I had to declare non isolated to solve a compiler error. Main actor-isolated instance method 'userNotificationCenter(_:didReceive:withCompletionHandler:)' cannot be used to satisfy nonisolated requirement from protocol 'UNUserNotificationCenterDelegate' I was advised to: Add 'nonisolated' to 'userNotificationCenter(_:didReceive:withCompletionHandler:)' to make this instance method not isolated to the actor I filed a bug report: Aug 10, 2025 at 2:43 PM – FB19519575

Hey there,i start a live activity,but it not works, and sometime it can work; apns-unique-id 46445cfa-1bf6-0f63-5ea3-2afa53e02b0d and it show that " 2025年5月19日 GMT+8 15:13:25.836 received by APNS Server 2025年5月19日 GMT+8 15:13:26.244 discarded as application was not registered" but i did not know how can i do; thanks for you help

Here are some questions we received and answers: Q1: Is there a limit to the number of alarms that can be scheduled using AlarmKit? There is no set number as a limit, but this does not mean you can schedule a limitless number of alarms. Depending on device state, available resources, etc., the device may impose a limit, and restrict an app trying to schedule too many alarms simultaneously. When you hit a limit and not able to schedule more alarms, you will receive the maximumLimitReached error. Q2: Will the scheduled alarms persist after system or app events that may terminate an app, for example, a reboot, force quit, or app crash? Yes, all alarms are expected to persist regardless of app or device state changes, once they are successfully scheduled. Q3: Will alarms work if scheduled by an app that is hidden, or requires a passcode or Touch ID/Face ID to launch? Hidden or passcode required apps do not work with AlarmKit. Currently, any scheduled alarms by such apps will silently fail. Q4: When an alarm is dismissed (either by swiping or pressing the power button), can an app detect this action and execute code in response? What about force closed apps? When an alarm is dismissed, the stopIntent set in the AlarmConfiguration is called. Any code in the perform method of this AppIntent would execute. Q5: Is there a focus mode that AlarmKit cannot break through? No. AlarmKit alarms can break through all focus modes. Q6: What is the expected behavior when alarms from multiple apps overlap? Which one gets priority? Which alarm would get activated when multiple alarms are scheduled for the same time is non-deterministic. There is no way to guarantee which app or which alarm will "win". Q7: What do pressing the physical buttons do when an AlarmKit alarm is active? Any physical button that causes a reaction from AlarmKit will stop the currently alerting alarm. Q8: If there are multiple alarms active at one time, which ones do physical buttons interact with? Pressing a physical button will dismiss all currently alerting alarms Argun Tekant /  DTS Engineer / Core Technologies Change History: 2025-08-15: First posted

i hava a app using Gateway.push.apple.com to push Notifications,but it is not working sine last month, i test the api show push Notifications success but my device can't receive the Notifications ,is this api not working anymore ? but why the api show push Notifications success ?

I wanted to know if Apple ever supported displaying a red dot on notificationswith no indication number.

Is there a public method to know when an APNS has appeared on the screen? wrapping up a very high end photogrammetry app, using the front facing camera and screen illumination- incoming notifications completely throw off the math. Ideally, it would be great to turn on Do Not Disturb for the short process, but we’d settle for just the detection of the notification banner. also: extra credit - programattically adjusting Auto Dimming, and True Tone would be lovely too.