Main Issue We are experiencing an issue where iOS devices become unresponsive when attempting to shutdown or reboot from the lock screen while locked into Single App Mode via MDM or Apple Configurator. Steps to Reproduce: Start any iOS device. Use Apple Configurator or an MDM solution to enable Single App Mode. Wait for the device to lock into the specified app. Lock the device so that it goes to the lock screen. Hold the Power button and Volume Up button until the shutdown/emergency screen appears. At this point, the device becomes unresponsive. After approximately 30 seconds, the message "Guided Access app unavailable. Please contact your administrator" appears. The device is now frozen, and the only way to recover is to force restart it using Apple's forced restart method (Apple Support Link). Additional Issue: Additionally, we observe that when using an app in Single App Mode, attempting to reboot the device and canceling the reboot prevents any subsequent reboot attempts until a force restart is performed. Steps to Reproduce This Behavior: Lock the iOS device into Single App Mode. Use the app normally. Attempt to shut down the device by holding the Power and Volume Up buttons. The shutdown/emergency screen appears as expected. Cancel the shutdown by tapping "Cancel." The device returns to the lock screen. Swipe up to return to the app. Attempt to shut down the device again using the same method. Nothing happens—the shutdown screen no longer appears. The only way to reboot the device now is through a forced restart. This appears to be a bug in Single App Mode behavior, potentially related to Guided Access restrictions. Has anyone else encountered this issue? Is this the right place to report this issue? or should I report it elsewhere? I have more videos and material showing how to reproduce this issue if needed.

I am creating a prototype with the new Screen Time API introduced by Apple. The issue I am facing is, Applications installed in child device is not showing in parent device with FamilyActivityPicker. It is showing in Child device and apps can be shielded from child's device. Can some one describe, how to list the apps in parent's device. Both Device are running in iOS 15.3. Both falls in same family group Child is under 13 yrs old Screen Time enabled in both device and parent device can see child in Screen Time.

Hello All, I am currently developing a mobile management system using declarative management and for the most part it is pretty great. There is one consistent issue I have run into and it comes when testing VPP app installs with not enough licenses. When my server detects that it can't provide a license ID it will return a 404, which causes the rest of the DM syncing to stop, and the activation to throw an error. Per the documentation for using simple activation: An array of strings that specify the identifiers of configurations to install. A failure to install one of the configurations doesn’t prevent other configurations from installing The above would imply that if a config fails it should not affect anything else (aside from possibly reporting an error. Am I returning the wrong error code for it to continue or is the behavior correct and the documentation is wrong? Any additional info would be useful

I found that "search" endpoint is recently added to api.ent.apple.com : https://developer.apple.com/documentation/devicemanagement/get-catalog-search-results However it seems we cannot find custom apps using this API even with sToken. Is it not suppoted yet? Thank you

I'm trying to use DDM manager Safari Extensins in macOS Sequoia. I generate json and load it by mdm and ddm , but it doesn't seems to work. The json I loading is the following: { "Type": "com.apple.configuration.safari.extensions.settings", "Payload": { "ManagedExtensions": { "*": { "State": "AlwaysOn", "PrivateBrowsing": "AlwaysOn", "AllowedDomains": [], "DeniedDomains": [] } } }, "Identifier": "com.test.safari" } This following image is macOS Sequoia Console log. It show the "com.apple.configuration.safari.extensions.settings" had been run successfully, and no errors. macOS Sequoia response is the following: { "StatusItems" : { "management" : { "declarations" : { "activations" : [ { "active" : true, "identifier" : "com.example.act", "valid" : "valid", "server-token" : "5cc191206d1b1933" } ], "configurations" : [ { "active" : true, "identifier" : "com.test.safari", "valid" : "unknown", "server-token" : "29d3ec5ab48e6367" } ], "assets" : [ ], "management" : [ ] } } }, "Errors" : [ ] } you can see macOS Sequoia response , The "valid" value is always "unknown" at ""identifier" : "com.test.safari", but "Errors" is empty, Safari app don't load extensions , the SafariExtensionSettings" ddm don't work, Is there anything wrong with "SafariExtensionSettings" json? or how can I debug it

"To receive payments from Apple, you must add a bank account." As an Apple "Individual" developer, can I accept payments to my corporate card?

I am needing to access the ABM API via C#. Searching has directed me to use BouncyCastle. I have downloaded the PEM file. However, using the following: using (var reader = File.OpenText(pemFilePath)) { var pemReader = new PemReader(reader); var keyObject = pemReader.ReadObject(); I get the error "problem creating EC private key: System.NullReferenceException: Object reference not set to an instance of an object."

Hi, My client has already developed an ios app and they need an enterprise account to publish the app. What are the procedures to create enterprise account?

Hello, I have implemented my virtual meeting extension and my application shows no issues in the calendar application, with a join button displayed. Everything is great!. However, with the help of EKEventEditViewController and EKEvent instances, when creating an event from the main target of the application using EventKitUI, the event will not be displayed as a virtual meeting. I have seen that other applications like Zoom have already implemented this, and I find it difficult to find relevant documentation on how to link events created by the program to virtual meetings. How do I set an event as a meeting when I want to add it to the main program? In addition, the function in the VirtualConferenceProvider.swift file of the extension program fetchVirtualConference(identifier: EKVirtualConferenceRoomTypeIdentifier, completionHandler: @escaping (EKVirtualConferenceDescriptor?, (any Error)? ）->Void) How are the parameters in this function obtained? It's impossible for every conference related link to be the same

I'm currently implementing a managed app using the new AppConfig specification. I referred to Apple's official documentation: Specifying and decoding a configuration. Based on the example provided in the "Publish your configuration specification" section, I structured my application configuration plist like this: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>configuration</key> <dict> <key>account</key> <dict> <key>username</key> <string>test user</string> <key>password</key> <string>test 123</string> </dict> <key>domain</key> <string>test example.com</string> </dict> </dict> </plist> When I deployed this configuration via my MDM server, the server reported valid for the activation, configuration and asset (which is the plist), but the configuration did not reflect or apply within my app. My app was unable to retrieve these settings. After some troubleshooting, I found that removing the top-level <key>configuration</key> wrapper resolved the issue. The following plist structure successfully pushed the configuration to my app: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>account</key> <dict> <key>username</key> <string>test user</string> <key>password</key> <string>test 123</string> </dict> <key>domain</key> <string>test example.com</string> </dict> </plist> My question is: Is the inclusion of the <key>configuration</key> wrapper (as shown in the Apple documentation example) incorrect for the current AppConfig implementation? Or is this structure intended for a future release (e.g., iOS 26 or beyond) and the documentation implicitly refers to it, causing confusion for current implementation? Any clarification would be greatly appreciated! Thank you!

Hello, We're testing the new allowedExternalIntelligenceWorkspaceIDs key in the MDM Restrictions payload on supervised iPads. According to Apple's documentation, this key expects an "external integration workspace ID", but it's not clear what this specifically refers to. We've tried the following IDs individually (one at a time, as documentation says only one is supported currently): OpenAI Organization ID ChatGPT user email Apple ID used in ChatGPT Google ID used in ChatGPT login The profile installs correctly via MDM and the key is set, but we want to confirm: What exactly is considered a valid "external integration workspace ID" for this key? Is there a way to verify that the restriction is working as intended on the device (e.g. does it limit specific integrations or apps)? Is there an official list of services that currently support this? Any clarification from Apple or other developers with experience on this would be very helpful. Thanks in advance.

Is there any mechanism to restrict camera usage on a user-owned device, once they have opted in, consented to the restriction, and installed a management profile? Documentation suggests it was possible with allowCamera, but has be deprecated on unsupervised devices. Am I understanding correctly that it's simply not possible anymore unless the device is supervised?

We want to set key-value pair (installation_token: xxxxx) into an app installed by MDM. Formerly we could set the key-value using Settings MDM command like this. <dict> <key>Command</key> <dict> <key>RequestType</key> <string>Settings</string> <key>Settings</key> <array> <dict> <key>Configuration</key> <dict> <key>installation_token</key> <string>xxxxxxx</string> </dict> <key>Identifier</key> <string>com.cloudflare.cloudflareoneagent</string> <key>Item</key> <string>ApplicationConfiguration</string> </dict> </array> </dict> We can still use this for the apps installed withInstallApplication MDM command, however we cannot apply this configuration into the app using Declarative Device Management. When we try it, we got an error like this. <dict> <key>CommandUUID</key> <string>.............</string> <key>Settings</key> <array> <dict> <key>ErrorChain</key> <array> <dict> <key>ErrorCode</key> <integer>12008</integer> <key>ErrorDomain</key> <string>MDMErrorDomain</string> <key>LocalizedDescription</key> <string>Could not modify apps managed by Declarative Device Management.</string> <key>USEnglishDescription</key> <string>Could not modify apps managed by Declarative Device Management.</string> </dict> </array> <key>Identifier</key> <string>com.cloudflare.cloudflareoneagent</string> <key>Item</key> <string>ApplicationConfiguration</string> <key>Status</key> <string>Error</string> </dict> </array> How can we work with managed application configuration with DDM?

I have an in house application that I develop for my company. The application requires our corporate MDM profile is installed on the phone. I recently got a new phone and our corporate IT team installed the MDM profile and the Comp Portal application for me to manage our corporate applications. I installed the application through the Comp Portal. It crashes right away when I launch the application and I see this error message in the Console when connected to the phone: "SpringBoard Snapshot generation request for bundleID: com.mycompany.mygroup.appName rejected due to the app being denylisted." I see other errors from runningboardd about failing to spawn the job and SpringBoard Bootstrapping failed for &lt;FBApplicationProcess: 0x510affd80; app&lt;com.mycompany.mygroup.appName&gt;:&gt; with error: &lt;NSError: 0x301e60090; domain: RBSRequestErrorDomain; code: 5; "Launch failed."&gt; I can launch a development version of the application with no problem by connecting the USB cable from my machine to my device and running through XCode. Other people have no problems launching the application. I compared all the certificates in the management profile with another device where the application does not crash and there are identical. We checked a number of settings on the devices to see if there could be something preventing the application from running but found nothing. We reset all settings and deleted and reinstalled the application with rebooting to see if perhaps it was an incomplete installation. Our IT folks want to wipe the phone and start over but I have little confidence that will fix the issue since we don't know the root cause. I am concerned that one of my Stakeholders might have the same issue if they get a new device. This application worked fine on my old phone. Device: iPhone 16 Pro Max iOS version: 18.2.1 Any ideas on next steps to troubleshoot this issue? How can I figure out the cause of the denylisting?

There is a longstanding restriction payload for supervised iOS devices that disables "Erase All Content and Settings." We have been experimenting with supervised watches paired with supervised phones that have that payload applied, and yet "Erase All Content and Settings" remains available on the watch. Is this: – a) An error with our payload? Should we be sending something else? – b) A bug in watchOS supervision? – c) A deliberate design choice? If so, what is the rationale for preventing organizations from maintaining this very basic level of control over devices they may be configuring and dispatching into the field?

I created a provisional profile from apple developer portal for my iOS app. The expiry date shown in the profile is 21-April 2026. However, when I build the app with this provisional profile the expiry date shown in the app is 11 Dec, 2025. My iOS distribution certificate expires only in November 2026. I see a embeded.mobileprovision profile inside the app, and it has an expiry of 11-Dec-2025. I did a clean build,, cleared unnecessary profiles from profile folder, created a new provisional profile and tried, but nothing seems help. We have a few apps, and no other app has this issue. We do annual release of all apps together for provisional profile renewal. As this app expiry is different, it will cause lot of difficulty for us next year. Will you please help me to resolve this issue? Thanks.

ABM has introduced a target date for moving a device from one MDM server to a new one. However, there's nothing in the API for setting that when you use the API to move MDM server Am I missing something or does it just not exist? Thanks Caroline

I’m looking for advice on implementing an Active Supervision Mode for enhanced parental control. My goal is to restrict access to both iOS system apps and third-party applications to create a safer and more tailored digital experience for my child. Here’s what I’d like to achieve: App Restrictions: Block specific apps (both iOS and third-party) and allow access only to approved ones. Time Limits: Set daily usage limits for individual apps or app categories. Content Filtering: Apply restrictions to block inappropriate content and age-inappropriate apps. Remote Management: Manage these settings remotely from my device for added convenience. Activity Monitoring: View app usage stats or receive alerts for policy violations. I understand that Screen Time on iOS offers basic parental controls, but I’m exploring whether iOS supports more advanced capabilities natively or through additional configurations. I’ve also heard that enrolling a device in Apple Business Manager (ABM) and linking it to an MDM (Mobile Device Management) solution might provide greater control. If this is a viable solution, could anyone provide guidance on: Enrolling a personal or family-owned device into Apple Business Manager. Linking an MDM for configuring app restrictions and monitoring usage. Alternatively, if there are third-party parental control apps that work seamlessly with iOS to achieve these goals, I’d appreciate your recommendations! Thanks in advance for your insights!

This test setup is Jamf Pro as the MDM with Entra as the IdP. PSSO is working on Sequoia devices. Prior to Tahoe, PSSO required the following three items: An existing local account, the delivery of Company Portal, and a profile containing PSSO payload. Based on the Tahoe announcement, it looks like PSSO is now available during Setup Assistant, removing the requirement of first creating a local account. I assume this means that the requirements now as easy as deploying Company Portal and the PSSO profile during the Pre-Stage policy. I attempted this on the macOS 26 beta 1 and during Setup Assistant, with the PSSO profile delivered, Setup Assistant prompts me to login to my IdP. However, pressing Continue will result in a failure, notifying me that the application required is not available. The continue button is now inactive but a "try again" button is available. This results in the loop of trying and then failing, stating that the required application is not available. I eventually must quit Setup Assistant which exits it and drops me at the login window. The only account that is visible is the management account. A trip into DFU and an IPSW restore then follows. Am I trying this too soon? Is PSSO at Setup Assistant not yet fully supported? Is there another requirement other than delivering Company App in the prestige alongside the profile? I've enabled the beta channel in MAU but there is no newer Company Portal being offered. Any guidance here would be appreciated as this is the PSSO announcement I've been waiting for since the deprecation of Apple Enterprise Connect.

I am a developer distributing an enterprise app. Recently, some users have intermittently encountered an error message on iOS 18.5 stating: "Unable to install this app because its integrity could not be verified." While the issue could not be reproduced on iPhone 15 / iOS 18.5, we have received reports that it does occur on the following devices: iPhone 14 / iOS 18.5, iPhone 14 Pro / iOS 18.5, iPhone 14 Plus / iOS 18.5, iPhone 16 Pro Max / iOS 18.5, Are there any known issues or recommended solutions regarding this behavior? Thank you in advance for your assistance.