My institution uses Blackboard and iPads to conduct assessments, and I’m trying to find some proctoring tools. Students conduct the assessments directly on Blackboard using either Safari or Chrome. I know that Apple has a function that does EXACTLY what I’m looking for, but from what I understand, this function has to be made available by Safari or Chrome: https://developer.apple.com/documentation/automaticassessmentconfiguration I don’t know whether either of these two browsers have this function enabled, and whether it can be switched on and off for custom-made Blackboard assessments. Is this a possibility? Are there other options? I know Blackboard offers built-in and third-party proctoring, but contacting them is difficult, and my company does not give me the appropriate authority to speak directly with Blackboard. So, I’m not able to find out about the feasibility, costs, etc. of this option. Any help would be greatly appreciated.

Hello, this may not be the correct place to ask this question so I apologize in advance if this is the case. We are currently having some issues when attempting to restore device back ups via iCloud that where previously enrolled to our MDM solution, as upon the restore no app data seems to be persisted over (we have tested restoring the backup on the same device and we have been able to have data persist between wipes) On the initial device we have ensured that the restrictions allowCloudKeychainSync allowManagedAppsCloudSync are set to true, and can see that the initial devices back up has the app data backed up, yet despite this data is not persisted when restoring from back up on a new device. On the device where the back up was initially done when restoring the applications are applied but indicated that they must be re-installed via our management console, once the app has been uninstalled and reinstalled the old data does show up, when applied to the new device our mdm solution pushes down the app.managed config but the device treats it as a new install. Could this possibly be due to us using Device Licensing when assigning apps? Or is it due to the intial device only performing a token update request when restoring and the new device going through the entire checkin proccess? Both devices are provisioned via DEP, and applications where assigned initially via VPP Any insight on this would be useful (For reference this is an MDM solution of our own making so we are attempting to sus out if there is a configuration issue we could be overlooking).

私は現在Intuneを使ったAppleIntelligenceの機能制限方法を調査しております。 AppleIntelligenceの機能のうち、以下5点を制御したく、その方法について教えてほしいです。 ・作文ツール ・Gen文字 ・写真(クリーンアップ機能等) ・さまたげ低減モード(通知の要約・優先順位機能含む) ・ChatGPTのサインイン(同期)・使用 今回ここに聞いた経緯としては、Microsoft社に本調査の確認をとったところ、 「制御後のデバイスの動作についてはAppleのペイロードを使用した制限のため、Appleに確認をとってほしい」 と伝えられたからです。 以下サイトではIntuneのAppleIntelligence機能の制御項目(MDM)が17項目ありますが、 ところどころ実動作について文章では理解ができない部分がありました。 ・https://techcommunity.microsoft.com/blog/intunecustomersuccess/microsoft-intune-support-for-apple-intelligence/4254037 AppleDeveloperサポートにも確認をとりましたが、以下サイトを紹介のみで、 特に追加の情報はありませんでした。 ・https://developer.apple.com/documentation/devicemanagement/restrictions 上記５機能を制限するためにはどの制限項目を使用すればよいでしょうか。

Hello world! First post here. Developing my first app. It primarily targets supervised and MDM managed devices. A few questions: For supervised devices, is serial number available? I want to get the number and use it for app auto activation Is MDM required for supervised devices? Or, as long as a device is enrolled through Apple Business Manager? Which capacity shall I request for the app? Thanks so much!

Hi,team: I need to distribute an mdm configuration file containing the "ServiceManagementManagedLoginItems" service to a large number of company-supervised computers, where com.apple.servicemanagement only supports macOS 13.0+. However, I cannot effectively distinguish whether the device system where the mdm configuration file needs to be installed is greater than 13. Can I directly install the mdm configuration file on all devices? Will installing the mdm configuration file on devices less than 13 have any impact on the system or other configuration items in mdm? The description link of ServiceManagementManagedLoginItems is: https://developer.apple.com/documentation/devicemanagement/servicemanagementmanagedloginitems

I'm looking at the Apple official document below and getting the app's information. https://developer.apple.com/documentation/devicemanagement/getting-app-and-book-information-legacy However, I couldn't get the custom app's information for a few days ago. The result item is empty. This is a URL that is normally viewed. https://uclient-api.itunes.apple.com/WebObjects/MZStorePlatform.woa/wa/lookup?version=2&p=mdm-lockup&caller=MDM&platform=volumestore&cc=jp&id=1202716089 This is the URL that gives an empty response to the result. https://uclient-api.itunes.apple.com/WebObjects/MZStorePlatform.woa/wa/lookup?version=2&p=mdm-lockup&caller=MDM&platform=volumestore&cc=jp&id=1556411142 In ABM/ASM, the number of applications used and the number of available applications are all viewed normally. Is there anything else I can check? Please reply. Thank you.

I want to side load a .ipa file from a Mac to iPhone connected to Mac via USB. I don't want to use ABM or enterprise account. Also these can be any number of unknown devices. Is there any way to set this up automatically?

Hello, this may not be the correct place to ask this question so I apologize in advance if this is the case. I am currently running into two specifc issues while continuing to implement the app.managed configuration which are quite frustrating and I will detail them below Unlike MDM where an application could be "reinstalled", by sending an install application command down for the same app DM does not have a similar mechanism which causes some issues as (while inconsistent) devices do not always respect the configuration sent down, and will not begin downloading VPP applications. They can be seen in the configuration when checking under VPN & Device Management but they do not return on a status report, alternatively and app will "install" but will have a cloud symbol next to it requiring a download (which I believe would be impossible on supervised devices without apple accounts/have restricted apple accounts associated to them). These apps are also reported incorrectly, as they return a managed response while being inaccessible. Both of these issues are solved by removing and reinstall applications (occasionally). Is there any easier way to trigger a re-install or is this the only way to trigger this? The Version element that can be optionally sent down does not seem to work (or if it does, does so inconsistently). A device will very happily download the application initially with the version element present, though when we detect an updated external ID from the VPP program and send down an updated configuration devices behave unexpectedly. Some have ignored it, some have responded back that a download has begun (with no download taking place and the application clearly still being the initial installed version as can be see in the apps page) or it just works, but there is not consistency. I realize a new UpdateBehavior object has been added to possibly handle this, but it is only supported in iOS 26 and above and there are plenty of people who do not have phones that can upgrade that far. Are there alternative ways to enforce an application update other than uninstalling and reinstalling the application without the version (or will sending down a config without a version after one was originally pinned force it to update to latest?) Kind Regards

Recently, we have encountered some users who have been unable to open the enterprise signature application after upgrading to version 18.3.2, without an IPS file. Through system logs, we found that signature verification has occurred SecKeyVerifySignature failed: Error Domain=NSOSStatusErrorDomain Code=-50 "rsa_pub_crypt failed, ccerr=-7" UserInfo={numberOfErrorsDeep=0, NSDescription=rsa_pub_crypt failed, ccerr=-7} Waiting for the information, I will provide the obtained system logs below. The application package name that crashed is com. mobile. moonew

Hi guys, I need to configure a VPN to work only for specific apps. I already have a supervised iPhone, and I’ve successfully configured the VPN, but right now it applies to the whole phone. I need it to work just for some apps. I tried using both Apple Configurator and iMazing, but I can’t find this option there.

Hello ! Currently, we have customers who use about 5,000 devices. In the case of ios26, the phone number is not acquired overall, and 18.x, 17.x, and 16.x are all acquired in half and not acquired in half. https://developer.apple.com/documentation/devicemanagement/deviceinformationcommand/command-data.dictionary/queries-data.dictionary It seems that it is the right behavior not to acquire it on the specification sheet. However, I wonder when it became impossible to acquire. (There are devices that can be acquired and devices that can't be acquired in the same os version.) Will the devices that are being acquired be blocked someday? When it was developed in 2019, it was in a state that could be acquired in full. I would also like to ask if there is an alternative way to get your phone number. Thank you.

We are experiencing a lot of problems deploying an enterprise app for in-house use since late January. All our iPads are managed by an MDM solution. It can take 10 or more attempts to successfully deploy the app. The deployment usually fails with the message "ASDErrorDomain error 854" among other messages. The company providing the MDM solution has no idea what causes this message or what it means. I suspect the error message is not generated by the MDM solutiion but rather gets passed through from iOS. After many attempts the installation may succeed suddenly, though, and the apps works as expected, but this may take weeks. I have not done any changes to my development system. 'I am running XCode 15.3 with SDK version 17.4, the iPads are on iOS 18.3

We have couple of devices that are registered into Platform SSO, and we have been noticing an issue when the user tried to login. After the users enters the password and hit the return key nothing happens, they need to hit the return key probably 10-15 times in order for the login to happen, the password entered is the correct one and it's just that hitting the return key doesn't invoke the login. On checking the log of the device one unusual thing that we noticed as compared to a different device where the login is working in a single go is that the AppSSOAgent or AppSSODaemon process were not getting invoked

Hello, I've noticed some unexpected behavior when updating a user's FileVault password. The set up: All actions are performed in virtualized macOS 14 and 15.5 guests on a 15.5 Apple Silicon host. FileVault is enabled. sjsp is a standard user with a Secure Token. The Mac is bound to AD, and the domain is reachable. Reproduction: systemctl -secureTokenStatus sjsp shows it's ENABLED. fdesetup remove -user sjsp fdesetup add -usertoadd sjsp systemctl -secureTokenStatus sjsp shows it's DISABLED. Surprisingly, sjsp is still able to unlock FileVault. Looking at unified logs for opendirectoryd and fdesetup, I see that a password change is being attempted in response to fdesetup add, which is unexpected. default 13:34:41.320883+0100 opendirectoryd Changing password for <private> (E5CC46D7-0C1F-4009-8421-9AA8217CB784) info 13:34:41.321317+0100 opendirectoryd No unlock record exists for E5CC46D7-0C1F-4009-8421-9AA8217CB784 info 13:34:41.321331+0100 opendirectoryd <private> (E5CC46D7-0C1F-4009-8421-9AA8217CB784) is not a SecureToken user: no unlock record default 13:34:41.321341+0100 opendirectoryd Changing password for <private> (E5CC46D7-0C1F-4009-8421-9AA8217CB784): user <private> SecureToken, only new password provided, credential <private> default 13:34:41.321454+0100 opendirectoryd Changing password for <private> (E5CC46D7-0C1F-4009-8421-9AA8217CB784) with no existing unlock record info 13:34:41.321857+0100 opendirectoryd No unlock record exists for E5CC46D7-0C1F-4009-8421-9AA8217CB784 default 13:34:41.321873+0100 opendirectoryd Record <private> (E5CC46D7-0C1F-4009-8421-9AA8217CB784) is eligible for SecureToken default 13:34:41.322637+0100 fdesetup DMAPFS cryptoUserForMacOSUserForVolume DMErr=-69594 retErr=-69594 outAPFSCryptoUser=(null) default 13:34:41.322699+0100 opendirectoryd While changing password for <private> (E5CC46D7-0C1F-4009-8421-9AA8217CB784): Not adding SecureToken; other unlock records exist, but no existing unlock record provided If I disconnect the network and follow the reproduction steps then the Secure Token is retained. Reconnecting and waiting a while doesn't cause the Secure Token to be lost. There are no log entries about attempting to change the password. Any help or explanation would be appreciated, thanks in advance.

Hi there, We’re testing Declarative Device Management (DDM) for VPP app management and followed the latest declaration template here: https://github.com/apple/device-management/blob/release/declarative/declarations/configurations/app.managed.yaml Our goal is to enable VPP auto-updates via the declaration. The payload we’re using looks like this: "AppStoreID": "1231325957", "InstallBehavior": "{\"Install\": \"Required\", \"License\": {\"Assignment\": \"Device\"}}", "UpdateBehavior": "{\"AutomaticAppUpdates\": \"AlwaysOn\"}" } What we’re seeing Device A (no Apple ID signed into App Store): User can manually update the VPP app with the above declaration in place. ( The same user cannot update the app if UpdateBehavior is not in the declaration payload. Device B (Apple ID signed into App Store, and the same Apple ID doesn't have the above app purchased): User cannot manually update the same VPP app. The App Store shows the error seen when UpdateBehavior is absent: “ cannot be updated because it was refunded or purchased with a different Apple Account.” Also, in this case, the user has no way to purchase the (free) app by their own as the app shows as owned/managed by MDM server. We have to remove the declaration, let the user purchase the same app, then re-deploy the declaration to allow the user to click that "Update" button when a new version for that app is available. Additionally, we’re unsure about the criteria/timing for automatic VPP app updates under DDM. After a new version became available, we waited several hours but the app did not auto-update. Repro summary App: VPP, device-assigned license Declaration: AutomaticAppUpdates = AlwaysOn, install required Device A: not signed into App Store → manual update allowed Device B: signed into App Store → manual update blocked with “refunded/different account” error Auto-update did not occur after waiting several hours post-release Any guidance, confirmation of expected behavior, or tips on additional logging we should collect (e.g., specific App Store / MDM / DDM logs and subsystems) would be greatly appreciated. If this is a known issue or requires a Feedback Assistant report, we’re happy to file one. Thanks,

Hello everyone, I recently changed the phone number associated with my Apple ID (about 4 days ago), but I’m still receiving the two-factor authentication verification codes on my old number instead of the new one. Has anyone experienced this? Is there a delay on Apple’s side, or is there something else I need to do to complete the update?

We have an office application used internally within our enterprise. The Provisioning Profiles (PP) for the app were about to expire, so we updated the PP and released a new version. However, we've encountered an issue where some users did not update their phones in time. After the app expired, they found it unusable and downloaded the new version, but the newly downloaded app also crashes on launch. Restarting the phone does not resolve the issue, and this primarily occurs on iOS 18.3.2. What could be the cause of this problem, and how should we address it?

Apple iPad Air device failing to enroll through ABM with "failed to retrieve configuration" error. This error occurs while reaching Apple ABM for fetching MDM server enrollment details. When we checked console logs when enrolling the device we found following error: ​default 13:54:07.229022+1000 teslad Error: Error Domain=MCCloudConfigurationErrorDomain Code=34004 "The cloud configuration server is unavailable or busy." UserInfo={NSLocalizedDescription=The cloud configuration server is unavailable or busy., CloudConfigurationErrorType=CloudConfigurationFatalError} default 13:54:07.229120+1000 Setup Service completed default 13:54:07.230096+1000 Setup Could not retrieve cloud configuration. Error: <Error domain: MCCloudConfigErrorDomain, code 33001>\ Feedback raised along with screenshot and console logs as well : FB17785513. Please analyse this issue and reply back to us.

Target Device: iPhone 13, iOS 18.5, enroll to MDM by enrollment profile Command: Response: Anyone could help?

On iOS 26, if in "Single App Mode", the device gets stuck on the lock screen. Devices are configured in SAM (kiosk mode), without a PIN requirement. Since updating to iPadOS 26, every single device that locks (goes to sleep) becomes completely unresponsive at the lock screen. Touch input does not work. The only way to regain access is to reboot the device, which will boot to the SAM app, but then lock again if it goes to sleep. Related discussion in the public forums.