Create the QRCode CIFilter<CIBlendWithMask> *f = CIFilter.QRCodeGenerator; f.message = [@"Message" dataUsingEncoding:NSASCIIStringEncoding]; f.correctionLevel = @"Q"; // increase level CIImage *qrcode = f.outputImage; Overlay the icon CIImage *icon = [CIImage imageWithURL:url]; CGAffineTransform *t = CGAffineTransformMakeTranslation( (qrcode.extent.width-icon.extent.width)/2.0, (qrcode.extent.height-icon.extent.height)/2.0); icon = [icon imageByApplyingTransform:t]; qrcode = [icon imageByCompositingOver:qrcode]; Round off the corners static dispatch_once_t onceToken; static CIWarpKernel *k; dispatch_once(&onceToken, ^ { k = [CIWarpKernel kernelWithFunctionName:name fromMetalLibraryData:metalLibData() error:nil]; }); CGRect iExtent = image.extent; qrcode = [k applyWithExtent:qrcode.extent roiCallback:^CGRect(int i, CGRect r) { return CGRectInset(r, -radius, -radius); } inputImage:qrcode arguments:@[[CIVector vectorWithCGRect:qrcode.extent], @(radius)]]; …and this code for the kernel should go in a separate .ci.metal source file: float2 bend_corners (float4 extent, float s, destination dest) { float2 p, dc = dest.coord(); float ratio = 1.0; // Round lower left corner p = float2(extent.x+s,extent.y+s); if (dc.x < p.x && dc.y < p.y) { float2 d = abs(dc - p); ratio = min(d.x,d.y)/max(d.x,d.y); ratio = sqrt(1.0 + ratio*ratio); return (dc - p)*ratio + p; } // Round lower right corner p = float2(extent.x+extent.z-s, extent.y+s); if (dc.x > p.x && dc.y < p.y) { float2 d = abs(dc - p); ratio = min(d.x,d.y)/max(d.x,d.y); ratio = sqrt(1.0 + ratio*ratio); return (dc - p)*ratio + p; } // Round upper left corner p = float2(extent.x+s,extent.y+extent.w-s); if (dc.x < p.x && dc.y > p.y) { float2 d = abs(dc - p); ratio = min(d.x,d.y)/max(d.x,d.y); ratio = sqrt(1.0 + ratio*ratio); return (dc - p)*ratio + p; } // Round upper right corner p = float2(extent.x+extent.z-s, extent.y+extent.w-s); if (dc.x > p.x && dc.y > p.y) { float2 d = abs(dc - p); ratio = min(d.x,d.y)/max(d.x,d.y); ratio = sqrt(1.0 + ratio*ratio); return (dc - p)*ratio + p; } return dc; }

Hello! I have a question about how thread groups work with tile shading. When running "traditional" compute, I get to choose both thread group size and the grid size. However, when using tile shading kernel I only have dispatchThreadsPerTile method - this controls how many threads will be ran in each tile. So far so good, but what about thread groups? The examples in video "Tile Shading on A11" seem to suggest that there will be only one thread group per tile. In the video, [[thread_index_in_threadgroup]] is called "local_id" and it is used to access the image block. I assume this is the default configuration. So when one does the following: Creates MTLRenderPassDescriptor with tileWidth set to W and tileHeight set to H Fires up the tile shading kernel using dispatchThreadsPerTile with MTLSize size = { W, H, 1 } I understand that the result is 1-to-1 mapping between the tile "pixels" and kernel threads. Now, what I would like to do is to have more than one thread group there. I want this for performance reasons: I have a certain compute kernel which I know executes very well with small thread group size. In fact, { 32, 1, 1 } seems to be the fastest. My understanding is that even if I set tile size to 16x16, and so I am executing 256 threads there, there will only be one SIMD group active in a thread group. Meaning that this SIMD group has to execute 8 times over the tile. Is it possible somehow? Or perhaps the limitations of the API are pointing at the limitations of hardware itself, and if I want to execute with SIMD group sized thread groups I have to use "traditional" compute encoder? Will be grateful for help. Michał

Anyone else unable to download the "Rendering a Scene with Deferred Lighting in C++" (https://developer.apple.com/documentation/metal/rendering-a-scene-with-deferred-lighting-in-c++?language=objc)? I just an error page: Is there another place to download this sample?

I have a UIView that displays lines, and I zoom in (scale by 2 on the scroll view zoomScale variable containing the UIView). As I zoom in, on the Mac version (Designed for IPad) I loose the graphic after a certain number of zooms (the scrollView maximumZoomScale is set at 10). To ensure that lines are correctly represented, I modify the contentScaleFactor variable on the UIView; otherwise, the line's display is pixelated. On the IPad (simulator and real) I do not loose the graphic when zooming. So the Mac port of the UIView drawing is not working as the IPad version. Everything else of the application works fine except this important details. I already submitted a feedback request (#FB16829106) with the images showing the problem. I need a solution to this problem. Thanks.

Hello. In the iOS app i'm working on we are very tight on memory budget and I was looking at ways to reduce our texture memory usage. However I noticed that comparing ASTC8x8 to ASTC12x12, there is no actual difference in allocated memory for most of our textures despite ASTC12x12 having less than half the bpp of 8x8. The difference between the two only becomes apparent for textures 1024x1024 and larger, and even in that case the actual texture data is sometimes only 60% of the allocation size. I understand there must be some alignment and padding going on, but this seems extreme. For an example scene in my app with astc12x12 for most textures there is over a 100mb difference in astc size on disk versus when loaded, so I would love to be able to recover even a portion of that memory. Here is some test code with some measurements i've taken using an iphone 11: for(int i = 0; i &lt; 11; i++) { MTLTextureDescriptor *texDesc = [[MTLTextureDescriptor alloc] init]; texDesc.pixelFormat = MTLPixelFormatASTC_12x12_LDR; int dim = 12; int n = 2 &lt;&lt; i; int mips = i+1; texDesc.width = n; texDesc.height = n; texDesc.mipmapLevelCount = mips; texDesc.resourceOptions = MTLResourceStorageModeShared; texDesc.usage = MTLTextureUsageShaderRead; // Calculate the equivalent astc texture size int blocks = 0; if(mips == 1) { blocks = n/dim + (n%dim&gt;0? 1 : 0); blocks *= blocks; } else { for(int j = 0; j &lt; mips; j++) { int a = 2 &lt;&lt; j; int cur = a/dim + (a%dim&gt;0? 1 : 0); blocks += cur*cur; } } auto tex = [objCObj newTextureWithDescriptor:texDesc]; printf("%dx%d, mips %d, Astc: %d, Metal: %d\n", n, n, mips, blocks*16, (int)tex.allocatedSize); } MTLPixelFormatASTC_12x12_LDR 128x128, mips 7, Astc: 2768, Metal: 6016 256x256, mips 8, Astc: 10512, Metal: 32768 512x512, mips 9, Astc: 40096, Metal: 98304 1024x1024, mips 10, Astc: 158432, Metal: 262144 128x128, mips 1, Astc: 1936, Metal: 4096 256x256, mips 1, Astc: 7744, Metal: 16384 512x512, mips 1, Astc: 29584, Metal: 65536 1024x1024, mips 1, Astc: 118336, Metal: 147456 MTLPixelFormatASTC_8x8_LDR 128x128, mips 7, Astc: 5488, Metal: 6016 256x256, mips 8, Astc: 21872, Metal: 32768 512x512, mips 9, Astc: 87408, Metal: 98304 1024x1024, mips 10, Astc: 349552, Metal: 360448 128x128, mips 1, Astc: 4096, Metal: 4096 256x256, mips 1, Astc: 16384, Metal: 16384 512x512, mips 1, Astc: 65536, Metal: 65536 1024x1024, mips 1, Astc: 262144, Metal: 262144 I also tried using MTLHeaps (placement and automatic) hoping they might be better, but saw nearly the same numbers. Is there any way to have metal allocate these textures in a more compact way to save on memory?

Hi, I am working with a large project. We are compiling each material to its own .metallib. They all include many common files full of inline functions. Finally we link it all together at the end with a single big pathtrace kernel. Everything works as expected, however the compile times have gotten completely out of hand and it takes multiple minutes to compile at runtime (to native code). I have gathered that I can do this offline by using metal-tt however if I am wondering if there is a way to reduce the compile times in such a scenario, and how to investigate what the root cause of the problem is. I suspect it could have to do with the fact that every materials metallib contains duplications of all the inline functions. Any ideas on how to profile and debug this? Thanks, Rasmus

Hello If you add a ModelEntity to a world inside a portal, the drawing of the model will be occluded properly to the portal bounds. However the invisible shape of the InputTargetComponent and CollisionComponent are not occluded. They are able to cross the portal, and if you have gestures on your ModelEntity you can trigger them in areas outside the portal bounds. This happens even if the ModelEntity has no PortalCrossingComponent.

I've been working on Swift game which is not yet launched or available for preview. The game works in such a way that it has idle CPU while the user is thinking and sustained max CPU and GPU on as many cores as possible when he makes a move. Rarely, due to OS activity or something else outside of my control (for example when dropping the OS curtain even if for just a bit then remove it), the game or some of its threads are moved to efficiency cores which results in major stuttering which persists precisely until the game is idle again at which point the game is moved back on performance cores - but if the player keeps making moves the stuttering simply won't go away and so I guess compuptation is locked onto efficiency cores. The issue does not reproduce on MacCatalyst on Intel. How do I tell Swift to avoid efficiency cores? BTW Swift and SceneKIT have AMAZING performance especially when compared to others.

Hello, Could someone post code that shows how to implement GCVirtualController to move a box around the screen? I've been poking around with GCVirtualController and gotten as far as having the D-pad and A B buttons appear on the display. But how do I make it do anything?

Hey everyone, I am currently developing an app in visionOS and using RealityComposerPro create scenes in put in my app. I have a humanoid model with hair strands, and each strand of hair has an opacity map. However, some reflections are still visible even though the opacity is zero. There are also some weird culling among hair strands (in the left circle) and weird reflections in hair cards (in the right circle). Here's my settings for the materials. Since all the hair strands are interconnected with each other, it is hard to decide the drawing order in Xcode, so I am wondering if there's an easier way to handle transparency objects. Please let me know if you know anything helpful, much appreciated!

In my SceneKit game I'm able to connect two players with GKMatchmakerViewController. Now I want to support the scenario where one of them disconnects and wants to reconnect. I tried to do this with this code: nonisolated public func match(_ match: GKMatch, player: GKPlayer, didChange state: GKPlayerConnectionState) { Task { @MainActor in switch state { case .connected: break case .disconnected, .unknown: let matchRequest = GKMatchRequest() matchRequest.recipients = [player] do { try await GKMatchmaker.shared().addPlayers(to: match, matchRequest: matchRequest) } catch { } @unknown default: break } } } nonisolated public func player(_ player: GKPlayer, didAccept invite: GKInvite) { guard let viewController = GKMatchmakerViewController(invite: invite) else { return } viewController.matchmakerDelegate = self present(viewController) } But after presenting the view controller with GKMatchmakerViewController(invite:), nothing else happens. I would expect matchmakerViewController(_:didFind:) to be called, or how would I get an instance of GKMatch? Here is the code I use to reproduce the issue, and below the reproduction steps. Code Run the attached project on an iPad and a Mac simultaneously. On both devices, tap the ship to connect to GameCenter. Create an automatched match by tapping the rightmost icon on both devices. When the two devices are matched, on iPad close the dialog and tap on the ship to disconnect from GameCenter. Wait some time until the Mac detects the disconnect and automatically sends an invitation to join again. When the notification arrives on the iPad, tap it, then tap the ship to connect to GameCenter again. The iPad receives the call player(_:didAccept:), but nothing else, so there’s no way to get a GKMatch instance again.

I'm building a game with a client-server architecture. Using GKMatch.chooseBestHostingPlayer(_:) rarely works. When I started testing it today, it worked once at the very beginning, and since then it always succeeds on one client and returns nil on the other client. I'm testing with a Mac and an iPhone. Sometimes it fails on the Mac, sometimes on the iPhone. On the device that it succeeds on, the provided host can be the device itself or the other one. I created FB9583628 in August 2021, but after the Feedback Assistant team replied that they are not able to reproduce it, the feedback never went forward. import SceneKit import GameKit #if os(macOS) typealias ViewController = NSViewController #else typealias ViewController = UIViewController #endif class GameViewController: ViewController, GKMatchmakerViewControllerDelegate, GKMatchDelegate { var match: GKMatch? var matchStarted = false override func viewDidLoad() { super.viewDidLoad() GKLocalPlayer.local.authenticateHandler = authenticate } private func authenticate(_ viewController: ViewController?, _ error: Error?) { #if os(macOS) if let viewController = viewController { presentAsSheet(viewController) } else if let error = error { print(error) } else { print("authenticated as \(GKLocalPlayer.local.gamePlayerID)") let viewController = GKMatchmakerViewController(matchRequest: defaultMatchRequest())! viewController.matchmakerDelegate = self GKDialogController.shared().present(viewController) } #else if let viewController = viewController { present(viewController, animated: true) } else if let error = error { print(error) } else { print("authenticated as \(GKLocalPlayer.local.gamePlayerID)") let viewController = GKMatchmakerViewController(matchRequest: defaultMatchRequest())! viewController.matchmakerDelegate = self present(viewController, animated: true) } #endif } private func defaultMatchRequest() -> GKMatchRequest { let request = GKMatchRequest() request.minPlayers = 2 request.maxPlayers = 2 request.defaultNumberOfPlayers = 2 request.inviteMessage = "Ciao!" return request } func matchmakerViewControllerWasCancelled(_ viewController: GKMatchmakerViewController) { print("cancelled") } func matchmakerViewController(_ viewController: GKMatchmakerViewController, didFailWithError error: Error) { print(error) } func matchmakerViewController(_ viewController: GKMatchmakerViewController, didFind match: GKMatch) { self.match = match match.delegate = self startMatch() } func match(_ match: GKMatch, player: GKPlayer, didChange state: GKPlayerConnectionState) { print("\(player.gamePlayerID) changed state to \(String(describing: state))") startMatch() } func startMatch() { let match = match! if matchStarted || match.expectedPlayerCount > 0 { return } print("starting match with local player \(GKLocalPlayer.local.gamePlayerID) and remote players \(match.players.map({ $0.gamePlayerID }))") match.chooseBestHostingPlayer { host in print("host is \(String(describing: host?.gamePlayerID))") } } }

In Xcode version 16.2 (16C5032a) I created: One [ScenekitApp] [File/New/Project/iOS/Game/Game Technology: SceneKit]. Three custom Frameworks [File/New/Project/iOS/Framework] [ASCSource.framework, ASCCommon.framework and ASCCoreData.framework]. In the four projects the [Minimum Deployments=iOS 15.0], [Swift version=6.0] and [BUILD_LIBRARY_FOR_DISTRIBUTION=Yes]. I directly installed the [Zip.framework] in [ASCSource.framework] without [pod init/pod install] and in the [General tab] [Frameworks, Libraries and Embeded Content] [Zip.framework Embed&Sign]. I installed the three frameworks [ASCSource.framework, ASCCommon.framework and ASCCoreData.framework] in [ScenekitApp] and everything works perfectly in Xcode version 16.2(16C5032a). I updated Xcode version 16.2(16C5032a) to Xcode version 16.3(16E140) and some errors in the SDKs were indicated. [Failed to build module 'ASCSource'; this SDK is not supported by the compiler (the SDK is built with 'Apple Swift version 6.0.3 effective-5.10 (swiftlang-6.0.3.1.10 clang-1600.0.30.1)', while this compiler is 'Apple Swift version 6.1 effective-5.10 (swiftlang-6.1.0.110.21 clang-1700.0.13.3)'). Please select a toolchain which matches the SDK]. [Failed to build module 'Zip'; this SDK is not supported by the compiler (the SDK is built with 'Apple Swift version 6.0.3 effective-5.10 (swiftlang-6.0.3.1.10 clang-1600.0.30.1)', while this compiler is 'Apple Swift version 6.1 effective-5.10 (swiftlang-6.1.0.110.21 clang-1700.0.13.3)'). Please select a toolchain which matches the SDK]. If I recompile all frameworks in Xcode version 16.3 (16E140) it will work, but I don't think it will be a good solution. I found some discussions in links like the following without success. https://github.com/firebase/firebase-ios-sdk/issues/13727 https://stackoverflow.com/questions/70556401/swift-version-conflict-this-sdk-is-not-supported-by-the-compiler-please-select Any help is welcome. Thanks everyone!!!

Hello I am trying to get thread group memory access in fragment shader. In essence, I would like to have all the fragments in a tile to bitwiseOR some value. My idea was to use simd_or across the SIMD group, then make each SIMD group thread 0 to atomic or the value into thread group memory. Finally very first thread of the tile would be tasked with writing the value down to texture with write access. Now, I can allocate the thread group memory argument to the fragment function all right. MTLRenderEncoder has setThreadgroupMemoryLength call, which I am using the following way [renderEncoder setThreagroupMemoryLength: 16 offset: 0 atIndex:0] Unfortunately, all I am getting is the following error (runtime assertion) -[MTLDebugRenderCommandEncoder setThreadgroupMemoryLength:offset:atIndex:]:3487: failed assertion Set Threadgroup Memory Length Validation offset + length(16) must be <= threadgroupMemoryLength(0).` What I am doing wrong? How I can get thread group memory in the fragment shader? I know I could use tile shading and compute function but the problem is that here I really like to use fragment stuff. Will be grateful for help.

Hi Apple, In VisionOS, for real-time streaming of large 3D scenes, I plan to create Metal buffers and textures in multiple threads and then use a compute shader on the main thread to copy the Metal resources into RealityKit, minimizing main thread usage. Given that most of RealityKit's default APIs require execution on the main actor (main thread), it is not ideal for streaming data. Is this approach the best way to handle streaming data and real-time rendering? Thank you very much.

Hi, I am trying to detect if all the screen are in fullscreen mode. The current approach is to get all windows' information from CGWindowListCopyWindowInfo and then compare the frame and coordinate with the frame of NSScreen.screens. However, there is a problem, the y position of the window seems to be relative to the screen. As it is not absolute position, I cannot compare it with the coordinate of the screen. Does anyone know if there are other information that I can use? Or is there a way to retrieve the absolute position or screen ID from the GCWIndow object?

i have a game that i upload it in the app store that my game size is 3 gigaByte but when I download it, it show that the really size is about 100 megaByte, i upload the game in google app is given me the real size, so the problem i think is when it get out the xcode, maybe some one can give me i clue for what is going on. my game was made by unity2020. if that helps.

Hello, I created a new project with the provided template for Immersive Environments. Straight out of box I build to both the Simulator and to Vision Pro and the provided Environment looks like this. What's interesting is that in Reality Composer Pro, it looks correct so how do I achieve the same look? Thank you in advance!

So I've been trying out GPTK with Elite Dangerous Horizons game and it looks like from what I can tell. The VRAM keeps going up until it goes over the limit where it drops the FPS to 1-3 FPS and then crashes the game. From the Performance HUD I can see that it looks like when using GPTK, the VRAM usage just keeps climbing and I never saw it drop down at all. I did some limited testing, and from that I think I can conclude that it is probably not a VRAM leak, but it might be caching it. The reason for this is because I noticed that if I went back to the area that I've been before. It won't increase the VRAM usage. So either there is something wrong with the freeing VRAM memory part, or it could be that GPTK might not be reporting the right amount of VRAM available to use? So maybe that's why it keeps allocating VRAM until it went out of memory and crashed the game. Just to test, I did try running the game with DXVK+MoltenVK combo, and I can see that it works just fine. VRAM is being freed up when it's no longer used. Is this a known issue in some games?

Starting with iOS 18.0 beta 1, I've noticed that RealityKit frequently crashes in the simulator when an app launches and presents an ARView. I was able to create a small sample app with repro steps that demonstrates the issue, and I've submitted feedback: FB16144085 I've included a crash log with the feedback. If possible, I'd appreciate it if an Apple engineer could investigate and suggest a workaround. It's awkward to be restricted to the iOS 17 simulator, which does not exhibit this behavior. Please let me know if there's anything I can do to help. Thank you.