Dive into the technical aspects of audio on your device, including codecs, format support, and customization options.

Audio Documentation

Posts under Audio subtopic

Post

Replies

Boosts

Views

Activity

SpeechTranscriber/SpeechAnalyzer being relatively slow compared to FoundationModel and TTS
So, I've been wondering how fast a an offline STT -> ML Prompt -> TTS roundtrip would be. Interestingly, for many tests, the SpeechTranscriber (STT) takes the bulk of the time, compared to generating a FoundationModel response and creating the Audio using TTS. E.g. InteractionStatistics: - listeningStarted: 21:24:23 4480 2423 - timeTillFirstAboveNoiseFloor: 01.794 - timeTillLastNoiseAboveFloor: 02.383 - timeTillFirstSpeechDetected: 02.399 - timeTillTranscriptFinalized: 04.510 - timeTillFirstMLModelResponse: 04.938 - timeTillMLModelResponse: 05.379 - timeTillTTSStarted: 04.962 - timeTillTTSFinished: 11.016 - speechLength: 06.054 - timeToResponse: 02.578 - transcript: This is a test. - mlModelResponse: Sure! I'm ready to help with your test. What do you need help with? Here, between my audio input ending and the Text-2-Speech starting top play (using AVSpeechUtterance) the total response time was 2.5s. Of that time, it took the SpeechAnalyzer 2.1s to get the transcript finalized, FoundationModel only took 0.4s to respond (and TTS started playing nearly instantly). I'm already using reportingOptions: [.volatileResults, .fastResults] so it's probably as fast as possible right now? I'm just surprised the STT takes so much longer compared to the other parts (all being CoreML based, aren't they?)
2
0
625
Aug ’25
Audio player app is silent if device connected via CarPlay
I have a SwiftUI app - (https://youtu.be/VbAfUk_eYl0?si=JxUBh0Bpb-vc1E1U) - which I thought was almost ready for release - a manager for airdropped audio files from Logic Pro or other music creation applications. It uses AVAudioEngine and AVAudioPlayerNode to play audio, and the MediaPlayer API to integrate with car audio and similar, all of which works well. It does not currently have an explicit CarPlay integration (and I'm slightly horrified at the amount of work that is going to require). I had the good or bad luck of getting a loaner car with carplay while mine is being repaired yesterday, and lo and behold, when connected to the vehicle via CarPlay, there is no audio output in the vehicle at all. The now playing panel correctly shows the information my app provides about the currently playing song; the player node believes it is playing, the AVAudioSession is configured as it should be. But there is no sound. Obviously I cannot ship it in this state. I've tried fiddling with the parameters the AVAudioSession is configured with, in case there was some parameter that was preventing audio output, to no avail - currently: var options = AVAudioSession.CategoryOptions() options.insert(.allowAirPlay) options.insert(.allowBluetooth) options.insert(.allowBluetoothA2DP) try session.setCategory(.playback, mode: .default, options: options) try? session.setPreferredIOBufferDuration(0.002) // ~96 samples at 44.1kHz try? session.setPrefersNoInterruptionsFromSystemAlerts(true) try? session.setPrefersInterruptionOnRouteDisconnect(false) try session.setActive(true, options: [.notifyOthersOnDeactivation]) All diagnostics within the app show the player operating correctly - files are played and flushed; AVAudioPlayerNodeCompletionCallbacks are called when they should be. But the output is not audible in the vehicle. I would much prefer to ship this app without full-blown CarPlay integration, but with working audio when connected via CarPlay, and work on full CarPlay integration for the next release. Is there some secret handshake I am just missing to make this work?
1
0
245
Mar ’25
iOS AUv3 extension: no Icon shown in host
Hi, I'm working on an AUv3 project. The app itself displays my icon. However the Auv3 extension does not display any icon in any host app (AUM, Drambo, etc.0). I thought that the extension would inherit the host app icon but that it does not appear to be the case. I tried to add the icon as a 1024x1024 file to the extension target and the update my extension plist file withe a CFBundleIconFile key but no luck either. It must surely be really easy. What am I missing? Thanks in advance for your help!
5
0
151
May ’25
AVAudioSessionCategoryOptionAllowBluetooth incorrectly marked as deprecated in iOS 8 in iOS 26 beta 5
AVAudioSessionCategoryOptionAllowBluetooth is marked as deprecated in iOS 8 in iOS 26 beta 5 when this option was not deprecated in iOS 18.6. I think this is a mistake and the deprecation is in iOS 26. Am I right? It seems that the substitute for this option is "AVAudioSessionCategoryOptionAllowBluetoothHFP". The documentation does not make clear if the behaviour is exactly the same or if any difference should be expected... Has anyone used this option in iOS 26? Should I expect any difference with the current behaviour of "AVAudioSessionCategoryOptionAllowBluetooth"? Thank you.
2
0
325
Aug ’25
SpeechAnalyzer error "asset not found after attempted download" for certain languages
I am trying to use the new SpeechAnalyzer framework in my Mac app, and am running into an issue for some languages. When I call AssetInstallationRequest.downloadAndInstall() for some languages, it throws an error: Error Domain=SFSpeechErrorDomain Code=1 "transcription.ar asset not found after attempted download." The ".ar" appears to be the language code, which in this case was Arabic. When I call AssetInventory.status(forModules:) before attempting the download, it is giving me a status of "downloading" (perhaps from an earlier attempt?). If this language was completely unsupported, I would expect it to return a status of "unsupported", so I'm not sure what's going on here. For other languages (Polish, for example) SpeechTranscriber.supportedLocale(equivalentTo:) is returning nil, so that seems like a clearly unsupported language. But I can't tell if the languages I'm trying, like Arabic, are supported and something is going wrong, or if this error represents something I can work around. Here's the relevant section of code. The error is thrown from downloadAndInstall(), so I never even get as far as setting up the SpeechAnalyzer itself. private func setUpAnalyzer() async throws { guard let sourceLanguage else { throw Error.languageNotSpecified } guard let locale = await SpeechTranscriber.supportedLocale(equivalentTo: Locale(identifier: sourceLanguage.rawValue)) else { throw Error.unsupportedLanguage } let transcriber = SpeechTranscriber(locale: locale, preset: .progressiveTranscription) self.transcriber = transcriber let reservedLocales = await AssetInventory.reservedLocales if !reservedLocales.contains(locale) && reservedLocales.count == AssetInventory.maximumReservedLocales { if let oldest = reservedLocales.last { await AssetInventory.release(reservedLocale: oldest) } } do { let status = await AssetInventory.status(forModules: [transcriber]) print("status: \(status)") if let installationRequest = try await AssetInventory.assetInstallationRequest(supporting: [transcriber]) { try await installationRequest.downloadAndInstall() } } ...
8
0
986
Jan ’26
SpeechTranscriber not providing audioTimeRange for most results
I started playing which transcription of audio files on macOS today, latest beta of Xcode and latest beta of Tahoe. Transcription itself works really well, but for some reason the majority of the results contain no audioTimeRange. I got 22 single-word results with time ranges, spread out all over total file of 53 minutes. Is there something I can do to improve this? To my understanding, I have followed sample code and instructions very closely, but the SwiftTranscriptionSampleApp and other examples I've seen lead me to believe I should be getting a lot more time ranges than I actually do.
3
0
205
Aug ’25
Is AVAudioPCMFormatFloat32 required for playing a buffer with AVAudioEngine / AVAudioPlayerNode
I have a PCM audio buffer (AVAudioPCMFormatInt16). When I try to play it using AVPlayerNode / AVAudioEngine an exception is thrown: "[[busArray objectAtIndexedSubscript:(NSUInteger)element] setFormat:format error:&nsErr]: returned false, error Error Domain=NSOSStatusErrorDomain Code=-10868 (related thread https://forums.developer.apple.com/forums/thread/700497?answerId=780530022#780530022) If I convert the buffer to AVAudioPCMFormatFloat32 playback works. My questions are: Does AVAudioEngine / AVPlayerNode require AVAudioPCMBuffer to be in the Float32 format? Is there a way I can configure it to accept another format instead for my application? If 1 is YES is this documented anywhere? If 1 is YES is this required format subject to change at any point? Thanks! I was looking to watch the "AVAudioEngine in Practice" session video from WWDC 2014 but I can't find it anywhere (https://forums.developer.apple.com/forums/thread/747008).
1
0
1.1k
Oct ’25
Audio Unit v3 host v2 third party plugins
Hi, I have just implemented an Audio Unit v3 host. AgsAudioUnitPlugin *audio_unit_plugin; AVAudioUnitComponentManager *audio_unit_component_manager; NSArray<AVAudioUnitComponent *> *av_component_arr; AudioComponentDescription description; guint i, i_stop; if(!AGS_AUDIO_UNIT_MANAGER(audio_unit_manager)){ return; } audio_unit_component_manager = [AVAudioUnitComponentManager sharedAudioUnitComponentManager]; /* effects */ description = (AudioComponentDescription) {0,}; description.componentType = kAudioUnitType_Effect; av_component_arr = [audio_unit_component_manager componentsMatchingDescription:description]; i_stop = [av_component_arr count]; for(i = 0; i < i_stop; i++){ ags_audio_unit_manager_load_component(audio_unit_manager, (gpointer) av_component_arr[i]); } /* instruments */ description = (AudioComponentDescription) {0,}; description.componentType = kAudioUnitType_MusicDevice; av_component_arr = [audio_unit_component_manager componentsMatchingDescription:description]; i_stop = [av_component_arr count]; for(i = 0; i < i_stop; i++){ ags_audio_unit_manager_load_component(audio_unit_manager, (gpointer) av_component_arr[i]); } But this doesn't show me Audio Unit v2 plugins, why? regards, Joël
3
0
740
Aug ’25
Users experiencing frequent media services reset interruptions
I work on an iOS app that records video and audio. We've been getting reports for a while from users who are experiencing their video recordings being cut off. After investigating, I found that many users are receiving the AVAudioSessionMediaServicesWereResetNotification (.mediaServicesWereResetNotification) notification while recording. It's associated with the AVFoundationErrorDomain[-11819] error, which seems to indicate that the system audio daemon crashed. We have a handler registered to end the recording, show the user a prompt, and restart our AV sessions. However, from our logs this looks to be happening to hundreds of users every day and it's not an ideal user experience, so I would like to figure out why this is happening and if it's due to something that we're doing wrong. The debug menu option to trigger the audio session reset is not of much use, because it can't be triggered unless you leave the app and go to system settings. So our app can't be recording video when the debug reset is triggered. So far I haven't found a way to reproduced the issue locally, but I can see that it's happening to users from logs. I've found some posts online from developers experiencing similar issues, but none of them seem to directly address our issue. The system error doesn't include a userInfo dictionary, and as far as I can tell it's a system daemon crash so any logs would need to be captured from the OS. Is there any way that I could get more information about what may be causing this error that I may have missed?
1
0
98
Apr ’25
dlsym cannot find symbol g_dwILResult when debugging an audio plugin
I am trying to debug the AAX version of my plugin (MIDI effect) on Pro Tools, but I am getting the following error (Mac console) when attempting to load it: dlsym cannot find symbol g_dwILResult in CFBundle etc.. I used Xcode 16.4 to build the plugin. Has anybody come across the same or a similar message? Best, Achillefs Axart Labs
2
0
566
Sep ’25
Convert CoreAudio AudioObjectID to IOUSB LocationID
Is there a recommended way on macOS 26 Tahoe to take a CoreAudio AudioObjectID and use it to lookup the underlying USB LocationID? I previously used AudioObjectID to query the corresponding DeviceUID with kAudioDevicePropertyDeviceUID. Then I queried for the IOService matching kIOAudioEngineClassName with property kIOAudioEngineGlobalUniqueIDKey matching DeviceUID, and I loaded kUSBDevicePropertyLocationID from the result. This fails on macOS 26, because the IO Registry for the device has an entry for usbaudiod rather than AppleUSBAudioEngine, and usbaudiod does not include a kIOAudioEngineGlobalUniqueIDKey property (or any other property to map it to a CoreAudio DeviceUID). My use-case here is a piece of audio recording software that allows configuring a set of supported audio devices via USB HID prior to recording. I present the user with a list of CoreAudio devices to use, but without a way to lookup the underlying USB LocationID, I cannot guarantee that the configured device matches the selected device (e.g. if the user plugged in two identical microphones).
2
0
609
Sep ’25
How to disable/hide Audio Controls on lock screen from WkWebView
Hi, I am trying to remove the audio controls for my app on the lock screen. Since I use WKWebView, there are 3 audio tags in my html and I play and pause em via JS. However, if I do not play any sound since app launch, there are no audio controls on the lock screen. But if I play one of those 3 files (they are even less then 3 Sec sound effects e.g. for buttons) the audio controls appears on lock screen. Note even when the sounds on pause() or not playing they were listed on the lock screen. What I have tried so far without success MPNowPlayingInfoCenter.default().nowPlayingInfo = [:] and ``try audioSession.setCategory(.playback, mode: .default, options: []) try audioSession.setActive(false, options: .notifyOthersOnDeactivation)`` and UIApplication.shared.endReceivingRemoteControlEvents() Another problem is that the app scales with iOS system settings "display zoom". Is there a way to deny it? It is latest Xcode verion 16.3 and iOS 18. I have no background mode in my Capabilities. Nothing worked so far. Has anyone an idea? Greetings
2
0
135
May ’25
Appleデバイスの内蔵楽器音について
iPhoneやiPadにおいて、画面上のボタンなどをタップした際に、特定の楽器音を発音させる方法をご存知の方いらっしゃいませんか? 現在音楽学習アプリを作成途中で、画面上の鍵盤や指板のボタン状のframeに、単音又は和音を割当て発音させる事を考えております SwiftUIのcodeのみで実現できないでしょうか 嘗て、MIDIのlevel1の楽器の発音機能があった様に記憶していますが、現在のOS上では同様の機能を実装してないように思えます 皆様のお知恵をお貸しください
1
0
423
Mar ’25
Application tones start when I get incoming call or message
I've got a problem with my app where I'm testing it on my own phone. I'm using audio kit to generate tones as part of the app. Everything seems to work fine. Sounds start, Stop, etc. They play when the app is closed and when the phone is locked, so background is working. However, I'm seeing an issue where, even when STOP is pressed and the application exited, if I get a notification such as a text message, the base tone for the app starts to play. If I then open the app, check the Start/Stop button - it says start so that. hasnt' been activated. If I click Start, then a 2nd tone starts. This one stops with the Stop button. However the original tone that was set off by an incoming message carries on playing. Until I go to the Open Apps View on the phone and slide the application upwards. For the life of me, I can't figure out whats happening here.
1
0
111
May ’25
Is Call Translation API available for VOIP?
I might have misunderstood the docs, but is Call Translation going to be available for VOIP applications? Eg in an already connected VOIP call, would it be possible for Call Translations to be enabled on an iOS 26 and Apple Intelligence supported device? I have personally tried it and it doesn’t look like it supported VOIP but would love to confirm this. reference: https://developer.apple.com/documentation/callkit/cxsettranslatingcallaction/
1
0
78
Jun ’25
Crackling/Popping sound when using AVAudioUnitTimePitch
I have a simple AVAudioEngine graph as follows: AVAudioPlayerNode -> AVAudioUnitEQ -> AVAudioUnitTimePitch -> AVAudioUnitReverb -> Main mixer node of AVAudioEngine. I noticed that whenever I have AVAudioUnitTimePitch or AVAudioUnitVarispeed in the graph, I noticed a very distinct crackling/popping sound in my Airpods Pro 2 when starting up the engine and playing the AVAudioPlayerNode and unable to find the reason why this is happening. When I remove the node, the crackling completely goes away. How do I fix this problem since i need the user to be able to control the pitch and rate of the audio during playback. import AVKit @Observable @MainActor class AudioEngineManager { nonisolated private let engine = AVAudioEngine() private let playerNode = AVAudioPlayerNode() private let reverb = AVAudioUnitReverb() private let pitch = AVAudioUnitTimePitch() private let eq = AVAudioUnitEQ(numberOfBands: 10) private var audioFile: AVAudioFile? private var fadePlayPauseTask: Task<Void, Error>? private var playPauseCurrentFadeTime: Double = 0 init() { setupAudioEngine() } private func setupAudioEngine() { guard let url = Bundle.main.url(forResource: "Song name goes here", withExtension: "mp3") else { print("Audio file not found") return } do { audioFile = try AVAudioFile(forReading: url) } catch { print("Failed to load audio file: \(error)") return } reverb.loadFactoryPreset(.mediumHall) reverb.wetDryMix = 50 pitch.pitch = 0 // Increase pitch by 500 cents (5 semitones) engine.attach(playerNode) engine.attach(pitch) engine.attach(reverb) engine.attach(eq) // Connect: player -> pitch -> reverb -> output engine.connect(playerNode, to: eq, format: audioFile?.processingFormat) engine.connect(eq, to: pitch, format: audioFile?.processingFormat) engine.connect(pitch, to: reverb, format: audioFile?.processingFormat) engine.connect(reverb, to: engine.mainMixerNode, format: audioFile?.processingFormat) } func prepare() { guard let audioFile else { return } playerNode.scheduleFile(audioFile, at: nil) } func play() { DispatchQueue.global().async { [weak self] in guard let self else { return } engine.prepare() try? engine.start() DispatchQueue.main.async { [weak self] in guard let self else { return } playerNode.play() fadePlayPauseTask?.cancel() playPauseCurrentFadeTime = 0 fadePlayPauseTask = Task { [weak self] in guard let self else { return } while true { let volume = updateVolume(for: playPauseCurrentFadeTime / 0.1, rising: true) // Ramp up volume until 1 is reached if volume >= 1 { break } engine.mainMixerNode.outputVolume = volume try await Task.sleep(for: .milliseconds(10)) playPauseCurrentFadeTime += 0.01 } engine.mainMixerNode.outputVolume = 1 } } } } func pause() { fadePlayPauseTask?.cancel() playPauseCurrentFadeTime = 0 fadePlayPauseTask = Task { [weak self] in guard let self else { return } while true { let volume = updateVolume(for: playPauseCurrentFadeTime / 0.1, rising: false) // Ramp down volume until 0 is reached if volume <= 0 { break } engine.mainMixerNode.outputVolume = volume try await Task.sleep(for: .milliseconds(10)) playPauseCurrentFadeTime += 0.01 } engine.mainMixerNode.outputVolume = 0 playerNode.pause() // Shut down engine once ramp down completes DispatchQueue.global().async { [weak self] in guard let self else { return } engine.pause() } } } private func updateVolume(for x: Double, rising: Bool) -> Float { if rising { // Fade in return Float(pow(x, 2) * (3.0 - 2.0 * (x))) } else { // Fade out return Float(1 - (pow(x, 2) * (3.0 - 2.0 * (x)))) } } func setPitch(_ value: Float) { pitch.pitch = value } func setReverbMix(_ value: Float) { reverb.wetDryMix = value } } struct ContentView: View { @State private var audioManager = AudioEngineManager() @State private var pitch: Float = 0 @State private var reverb: Float = 0 var body: some View { VStack(spacing: 20) { Text("🎵 Audio Player with Reverb & Pitch") .font(.title2) HStack { Button("Prepare") { audioManager.prepare() } Button("Play") { audioManager.play() } .padding() .background(Color.green) .foregroundColor(.white) .cornerRadius(10) Button("Pause") { audioManager.pause() } .padding() .background(Color.red) .foregroundColor(.white) .cornerRadius(10) } VStack { Text("Pitch: \(Int(pitch)) cents") Slider(value: $pitch, in: -2400...2400, step: 100) { _ in audioManager.setPitch(pitch) } } VStack { Text("Reverb Mix: \(Int(reverb))%") Slider(value: $reverb, in: 0...100, step: 1) { _ in audioManager.setReverbMix(reverb) } } } .padding() } }
1
0
282
Apr ’25
WatchOS: Can a background metronome app coexist with both Runna workout and Spotify playback?
I’m building a standalone Apple Watch metronome app for running. My goal is for these 3 apps to work at the same time: Runna owns the workout session Spotify plays music my app plays a metronome click in the background So far this is what I've found: Using HKWorkout​Session in my metronome app works well with Spotify, but conflicts with Runna and other workout apps, so I removed that. Using watchOS background audio with longFormAudio allows my app run in the background, and it can coexist with Runna. However, it seems to conflict with Spotify playback, and one app tends to stop the other. Is there any supported watchOS audio/background configuration that allows all 3 at once? More specifically this is what I need: another app owns HKWorkout​Session Spotify keeps playing my app keeps generating metronome clicks in the background Or is this simply not supported by current watchOS session/background rules? My metronome uses AVAudio​Engine / AVAudio​Player​Node with generated click audio. Thank you!
4
0
294
3d
[26] audioTimeRange would still be interesting for .volatileResults in SpeechTranscriber
So experimenting with the new SpeechTranscriber, if I do: let transcriber = SpeechTranscriber( locale: locale, transcriptionOptions: [], reportingOptions: [.volatileResults], attributeOptions: [.audioTimeRange] ) only the final result has audio time ranges, not the volatile results. Is this a performance consideration? If there is no performance problem, it would be nice to have the option to also get speech time ranges for volatile responses. I'm not presenting the volatile text at all in the UI, I was just trying to keep statistics about the non-speech and the speech noise level, this way I can determine when the noise level falls under the noisefloor for a while. The goal here was to finalize the recording automatically, when the noise level indicate that the user has finished speaking.
6
0
757
Nov ’25
AudioOutputUnitStart takes ~500 ms when using Push-to-Talk framework after beginTransmission
I’m working with the Push-to-Talk (PTT) framework and observing a consistent delay when starting audio capture. Scenario: A PTT call is already active The AVAudioSession is fully configured I request beginTransmission on the PTT channel I start my Audio Unit for recording (AudioOutputUnitStart) Observed behavior: AudioOutputUnitStart takes ~500 ms This happens whether I start the Audio Unit: after didBeginTransmission, or after AVAudioSession didActivate Comparison: Using the same Audio Unit, same format, and same configuration Without the PTT framework, AudioOutputUnitStart takes ~200 ms Additional notes: I am not modifying or reconfiguring AVAudioSession when requesting beginTransmission The audio session is already set up when the PTT call starts There are no interruptions or route changes at the time of starting the Audio Unit Impact: This extra latency is significant for Push-to-Talk use cases where fast transmit start is critical.
1
0
345
Feb ’26
SpeechTranscriber/SpeechAnalyzer being relatively slow compared to FoundationModel and TTS
So, I've been wondering how fast a an offline STT -> ML Prompt -> TTS roundtrip would be. Interestingly, for many tests, the SpeechTranscriber (STT) takes the bulk of the time, compared to generating a FoundationModel response and creating the Audio using TTS. E.g. InteractionStatistics: - listeningStarted: 21:24:23 4480 2423 - timeTillFirstAboveNoiseFloor: 01.794 - timeTillLastNoiseAboveFloor: 02.383 - timeTillFirstSpeechDetected: 02.399 - timeTillTranscriptFinalized: 04.510 - timeTillFirstMLModelResponse: 04.938 - timeTillMLModelResponse: 05.379 - timeTillTTSStarted: 04.962 - timeTillTTSFinished: 11.016 - speechLength: 06.054 - timeToResponse: 02.578 - transcript: This is a test. - mlModelResponse: Sure! I'm ready to help with your test. What do you need help with? Here, between my audio input ending and the Text-2-Speech starting top play (using AVSpeechUtterance) the total response time was 2.5s. Of that time, it took the SpeechAnalyzer 2.1s to get the transcript finalized, FoundationModel only took 0.4s to respond (and TTS started playing nearly instantly). I'm already using reportingOptions: [.volatileResults, .fastResults] so it's probably as fast as possible right now? I'm just surprised the STT takes so much longer compared to the other parts (all being CoreML based, aren't they?)
Replies
2
Boosts
0
Views
625
Activity
Aug ’25
Audio player app is silent if device connected via CarPlay
I have a SwiftUI app - (https://youtu.be/VbAfUk_eYl0?si=JxUBh0Bpb-vc1E1U) - which I thought was almost ready for release - a manager for airdropped audio files from Logic Pro or other music creation applications. It uses AVAudioEngine and AVAudioPlayerNode to play audio, and the MediaPlayer API to integrate with car audio and similar, all of which works well. It does not currently have an explicit CarPlay integration (and I'm slightly horrified at the amount of work that is going to require). I had the good or bad luck of getting a loaner car with carplay while mine is being repaired yesterday, and lo and behold, when connected to the vehicle via CarPlay, there is no audio output in the vehicle at all. The now playing panel correctly shows the information my app provides about the currently playing song; the player node believes it is playing, the AVAudioSession is configured as it should be. But there is no sound. Obviously I cannot ship it in this state. I've tried fiddling with the parameters the AVAudioSession is configured with, in case there was some parameter that was preventing audio output, to no avail - currently: var options = AVAudioSession.CategoryOptions() options.insert(.allowAirPlay) options.insert(.allowBluetooth) options.insert(.allowBluetoothA2DP) try session.setCategory(.playback, mode: .default, options: options) try? session.setPreferredIOBufferDuration(0.002) // ~96 samples at 44.1kHz try? session.setPrefersNoInterruptionsFromSystemAlerts(true) try? session.setPrefersInterruptionOnRouteDisconnect(false) try session.setActive(true, options: [.notifyOthersOnDeactivation]) All diagnostics within the app show the player operating correctly - files are played and flushed; AVAudioPlayerNodeCompletionCallbacks are called when they should be. But the output is not audible in the vehicle. I would much prefer to ship this app without full-blown CarPlay integration, but with working audio when connected via CarPlay, and work on full CarPlay integration for the next release. Is there some secret handshake I am just missing to make this work?
Replies
1
Boosts
0
Views
245
Activity
Mar ’25
(iOS 18) SFSpeechRecognitionResult providing new text after a gap in speaking
Here is the demo from Apple's site This issues is specific to iOS 18. When running this demo, we are getting new text when we have a gap in speaking, the recognitionTask(with:resultHandler:) provides new text which is only spoken after the gap and not the concatenation of old text and the new spoken text.
Replies
6
Boosts
0
Views
1.2k
Activity
May ’25
iOS AUv3 extension: no Icon shown in host
Hi, I'm working on an AUv3 project. The app itself displays my icon. However the Auv3 extension does not display any icon in any host app (AUM, Drambo, etc.0). I thought that the extension would inherit the host app icon but that it does not appear to be the case. I tried to add the icon as a 1024x1024 file to the extension target and the update my extension plist file withe a CFBundleIconFile key but no luck either. It must surely be really easy. What am I missing? Thanks in advance for your help!
Replies
5
Boosts
0
Views
151
Activity
May ’25
AVAudioSessionCategoryOptionAllowBluetooth incorrectly marked as deprecated in iOS 8 in iOS 26 beta 5
AVAudioSessionCategoryOptionAllowBluetooth is marked as deprecated in iOS 8 in iOS 26 beta 5 when this option was not deprecated in iOS 18.6. I think this is a mistake and the deprecation is in iOS 26. Am I right? It seems that the substitute for this option is "AVAudioSessionCategoryOptionAllowBluetoothHFP". The documentation does not make clear if the behaviour is exactly the same or if any difference should be expected... Has anyone used this option in iOS 26? Should I expect any difference with the current behaviour of "AVAudioSessionCategoryOptionAllowBluetooth"? Thank you.
Replies
2
Boosts
0
Views
325
Activity
Aug ’25
SpeechAnalyzer error "asset not found after attempted download" for certain languages
I am trying to use the new SpeechAnalyzer framework in my Mac app, and am running into an issue for some languages. When I call AssetInstallationRequest.downloadAndInstall() for some languages, it throws an error: Error Domain=SFSpeechErrorDomain Code=1 "transcription.ar asset not found after attempted download." The ".ar" appears to be the language code, which in this case was Arabic. When I call AssetInventory.status(forModules:) before attempting the download, it is giving me a status of "downloading" (perhaps from an earlier attempt?). If this language was completely unsupported, I would expect it to return a status of "unsupported", so I'm not sure what's going on here. For other languages (Polish, for example) SpeechTranscriber.supportedLocale(equivalentTo:) is returning nil, so that seems like a clearly unsupported language. But I can't tell if the languages I'm trying, like Arabic, are supported and something is going wrong, or if this error represents something I can work around. Here's the relevant section of code. The error is thrown from downloadAndInstall(), so I never even get as far as setting up the SpeechAnalyzer itself. private func setUpAnalyzer() async throws { guard let sourceLanguage else { throw Error.languageNotSpecified } guard let locale = await SpeechTranscriber.supportedLocale(equivalentTo: Locale(identifier: sourceLanguage.rawValue)) else { throw Error.unsupportedLanguage } let transcriber = SpeechTranscriber(locale: locale, preset: .progressiveTranscription) self.transcriber = transcriber let reservedLocales = await AssetInventory.reservedLocales if !reservedLocales.contains(locale) && reservedLocales.count == AssetInventory.maximumReservedLocales { if let oldest = reservedLocales.last { await AssetInventory.release(reservedLocale: oldest) } } do { let status = await AssetInventory.status(forModules: [transcriber]) print("status: \(status)") if let installationRequest = try await AssetInventory.assetInstallationRequest(supporting: [transcriber]) { try await installationRequest.downloadAndInstall() } } ...
Replies
8
Boosts
0
Views
986
Activity
Jan ’26
SpeechTranscriber not providing audioTimeRange for most results
I started playing which transcription of audio files on macOS today, latest beta of Xcode and latest beta of Tahoe. Transcription itself works really well, but for some reason the majority of the results contain no audioTimeRange. I got 22 single-word results with time ranges, spread out all over total file of 53 minutes. Is there something I can do to improve this? To my understanding, I have followed sample code and instructions very closely, but the SwiftTranscriptionSampleApp and other examples I've seen lead me to believe I should be getting a lot more time ranges than I actually do.
Replies
3
Boosts
0
Views
205
Activity
Aug ’25
Is AVAudioPCMFormatFloat32 required for playing a buffer with AVAudioEngine / AVAudioPlayerNode
I have a PCM audio buffer (AVAudioPCMFormatInt16). When I try to play it using AVPlayerNode / AVAudioEngine an exception is thrown: "[[busArray objectAtIndexedSubscript:(NSUInteger)element] setFormat:format error:&nsErr]: returned false, error Error Domain=NSOSStatusErrorDomain Code=-10868 (related thread https://forums.developer.apple.com/forums/thread/700497?answerId=780530022#780530022) If I convert the buffer to AVAudioPCMFormatFloat32 playback works. My questions are: Does AVAudioEngine / AVPlayerNode require AVAudioPCMBuffer to be in the Float32 format? Is there a way I can configure it to accept another format instead for my application? If 1 is YES is this documented anywhere? If 1 is YES is this required format subject to change at any point? Thanks! I was looking to watch the "AVAudioEngine in Practice" session video from WWDC 2014 but I can't find it anywhere (https://forums.developer.apple.com/forums/thread/747008).
Replies
1
Boosts
0
Views
1.1k
Activity
Oct ’25
Audio Unit v3 host v2 third party plugins
Hi, I have just implemented an Audio Unit v3 host. AgsAudioUnitPlugin *audio_unit_plugin; AVAudioUnitComponentManager *audio_unit_component_manager; NSArray<AVAudioUnitComponent *> *av_component_arr; AudioComponentDescription description; guint i, i_stop; if(!AGS_AUDIO_UNIT_MANAGER(audio_unit_manager)){ return; } audio_unit_component_manager = [AVAudioUnitComponentManager sharedAudioUnitComponentManager]; /* effects */ description = (AudioComponentDescription) {0,}; description.componentType = kAudioUnitType_Effect; av_component_arr = [audio_unit_component_manager componentsMatchingDescription:description]; i_stop = [av_component_arr count]; for(i = 0; i < i_stop; i++){ ags_audio_unit_manager_load_component(audio_unit_manager, (gpointer) av_component_arr[i]); } /* instruments */ description = (AudioComponentDescription) {0,}; description.componentType = kAudioUnitType_MusicDevice; av_component_arr = [audio_unit_component_manager componentsMatchingDescription:description]; i_stop = [av_component_arr count]; for(i = 0; i < i_stop; i++){ ags_audio_unit_manager_load_component(audio_unit_manager, (gpointer) av_component_arr[i]); } But this doesn't show me Audio Unit v2 plugins, why? regards, Joël
Replies
3
Boosts
0
Views
740
Activity
Aug ’25
Users experiencing frequent media services reset interruptions
I work on an iOS app that records video and audio. We've been getting reports for a while from users who are experiencing their video recordings being cut off. After investigating, I found that many users are receiving the AVAudioSessionMediaServicesWereResetNotification (.mediaServicesWereResetNotification) notification while recording. It's associated with the AVFoundationErrorDomain[-11819] error, which seems to indicate that the system audio daemon crashed. We have a handler registered to end the recording, show the user a prompt, and restart our AV sessions. However, from our logs this looks to be happening to hundreds of users every day and it's not an ideal user experience, so I would like to figure out why this is happening and if it's due to something that we're doing wrong. The debug menu option to trigger the audio session reset is not of much use, because it can't be triggered unless you leave the app and go to system settings. So our app can't be recording video when the debug reset is triggered. So far I haven't found a way to reproduced the issue locally, but I can see that it's happening to users from logs. I've found some posts online from developers experiencing similar issues, but none of them seem to directly address our issue. The system error doesn't include a userInfo dictionary, and as far as I can tell it's a system daemon crash so any logs would need to be captured from the OS. Is there any way that I could get more information about what may be causing this error that I may have missed?
Replies
1
Boosts
0
Views
98
Activity
Apr ’25
dlsym cannot find symbol g_dwILResult when debugging an audio plugin
I am trying to debug the AAX version of my plugin (MIDI effect) on Pro Tools, but I am getting the following error (Mac console) when attempting to load it: dlsym cannot find symbol g_dwILResult in CFBundle etc.. I used Xcode 16.4 to build the plugin. Has anybody come across the same or a similar message? Best, Achillefs Axart Labs
Replies
2
Boosts
0
Views
566
Activity
Sep ’25
Convert CoreAudio AudioObjectID to IOUSB LocationID
Is there a recommended way on macOS 26 Tahoe to take a CoreAudio AudioObjectID and use it to lookup the underlying USB LocationID? I previously used AudioObjectID to query the corresponding DeviceUID with kAudioDevicePropertyDeviceUID. Then I queried for the IOService matching kIOAudioEngineClassName with property kIOAudioEngineGlobalUniqueIDKey matching DeviceUID, and I loaded kUSBDevicePropertyLocationID from the result. This fails on macOS 26, because the IO Registry for the device has an entry for usbaudiod rather than AppleUSBAudioEngine, and usbaudiod does not include a kIOAudioEngineGlobalUniqueIDKey property (or any other property to map it to a CoreAudio DeviceUID). My use-case here is a piece of audio recording software that allows configuring a set of supported audio devices via USB HID prior to recording. I present the user with a list of CoreAudio devices to use, but without a way to lookup the underlying USB LocationID, I cannot guarantee that the configured device matches the selected device (e.g. if the user plugged in two identical microphones).
Replies
2
Boosts
0
Views
609
Activity
Sep ’25
How to disable/hide Audio Controls on lock screen from WkWebView
Hi, I am trying to remove the audio controls for my app on the lock screen. Since I use WKWebView, there are 3 audio tags in my html and I play and pause em via JS. However, if I do not play any sound since app launch, there are no audio controls on the lock screen. But if I play one of those 3 files (they are even less then 3 Sec sound effects e.g. for buttons) the audio controls appears on lock screen. Note even when the sounds on pause() or not playing they were listed on the lock screen. What I have tried so far without success MPNowPlayingInfoCenter.default().nowPlayingInfo = [:] and ``try audioSession.setCategory(.playback, mode: .default, options: []) try audioSession.setActive(false, options: .notifyOthersOnDeactivation)`` and UIApplication.shared.endReceivingRemoteControlEvents() Another problem is that the app scales with iOS system settings "display zoom". Is there a way to deny it? It is latest Xcode verion 16.3 and iOS 18. I have no background mode in my Capabilities. Nothing worked so far. Has anyone an idea? Greetings
Replies
2
Boosts
0
Views
135
Activity
May ’25
Appleデバイスの内蔵楽器音について
iPhoneやiPadにおいて、画面上のボタンなどをタップした際に、特定の楽器音を発音させる方法をご存知の方いらっしゃいませんか? 現在音楽学習アプリを作成途中で、画面上の鍵盤や指板のボタン状のframeに、単音又は和音を割当て発音させる事を考えております SwiftUIのcodeのみで実現できないでしょうか 嘗て、MIDIのlevel1の楽器の発音機能があった様に記憶していますが、現在のOS上では同様の機能を実装してないように思えます 皆様のお知恵をお貸しください
Replies
1
Boosts
0
Views
423
Activity
Mar ’25
Application tones start when I get incoming call or message
I've got a problem with my app where I'm testing it on my own phone. I'm using audio kit to generate tones as part of the app. Everything seems to work fine. Sounds start, Stop, etc. They play when the app is closed and when the phone is locked, so background is working. However, I'm seeing an issue where, even when STOP is pressed and the application exited, if I get a notification such as a text message, the base tone for the app starts to play. If I then open the app, check the Start/Stop button - it says start so that. hasnt' been activated. If I click Start, then a 2nd tone starts. This one stops with the Stop button. However the original tone that was set off by an incoming message carries on playing. Until I go to the Open Apps View on the phone and slide the application upwards. For the life of me, I can't figure out whats happening here.
Replies
1
Boosts
0
Views
111
Activity
May ’25
Is Call Translation API available for VOIP?
I might have misunderstood the docs, but is Call Translation going to be available for VOIP applications? Eg in an already connected VOIP call, would it be possible for Call Translations to be enabled on an iOS 26 and Apple Intelligence supported device? I have personally tried it and it doesn’t look like it supported VOIP but would love to confirm this. reference: https://developer.apple.com/documentation/callkit/cxsettranslatingcallaction/
Replies
1
Boosts
0
Views
78
Activity
Jun ’25
Crackling/Popping sound when using AVAudioUnitTimePitch
I have a simple AVAudioEngine graph as follows: AVAudioPlayerNode -> AVAudioUnitEQ -> AVAudioUnitTimePitch -> AVAudioUnitReverb -> Main mixer node of AVAudioEngine. I noticed that whenever I have AVAudioUnitTimePitch or AVAudioUnitVarispeed in the graph, I noticed a very distinct crackling/popping sound in my Airpods Pro 2 when starting up the engine and playing the AVAudioPlayerNode and unable to find the reason why this is happening. When I remove the node, the crackling completely goes away. How do I fix this problem since i need the user to be able to control the pitch and rate of the audio during playback. import AVKit @Observable @MainActor class AudioEngineManager { nonisolated private let engine = AVAudioEngine() private let playerNode = AVAudioPlayerNode() private let reverb = AVAudioUnitReverb() private let pitch = AVAudioUnitTimePitch() private let eq = AVAudioUnitEQ(numberOfBands: 10) private var audioFile: AVAudioFile? private var fadePlayPauseTask: Task<Void, Error>? private var playPauseCurrentFadeTime: Double = 0 init() { setupAudioEngine() } private func setupAudioEngine() { guard let url = Bundle.main.url(forResource: "Song name goes here", withExtension: "mp3") else { print("Audio file not found") return } do { audioFile = try AVAudioFile(forReading: url) } catch { print("Failed to load audio file: \(error)") return } reverb.loadFactoryPreset(.mediumHall) reverb.wetDryMix = 50 pitch.pitch = 0 // Increase pitch by 500 cents (5 semitones) engine.attach(playerNode) engine.attach(pitch) engine.attach(reverb) engine.attach(eq) // Connect: player -> pitch -> reverb -> output engine.connect(playerNode, to: eq, format: audioFile?.processingFormat) engine.connect(eq, to: pitch, format: audioFile?.processingFormat) engine.connect(pitch, to: reverb, format: audioFile?.processingFormat) engine.connect(reverb, to: engine.mainMixerNode, format: audioFile?.processingFormat) } func prepare() { guard let audioFile else { return } playerNode.scheduleFile(audioFile, at: nil) } func play() { DispatchQueue.global().async { [weak self] in guard let self else { return } engine.prepare() try? engine.start() DispatchQueue.main.async { [weak self] in guard let self else { return } playerNode.play() fadePlayPauseTask?.cancel() playPauseCurrentFadeTime = 0 fadePlayPauseTask = Task { [weak self] in guard let self else { return } while true { let volume = updateVolume(for: playPauseCurrentFadeTime / 0.1, rising: true) // Ramp up volume until 1 is reached if volume >= 1 { break } engine.mainMixerNode.outputVolume = volume try await Task.sleep(for: .milliseconds(10)) playPauseCurrentFadeTime += 0.01 } engine.mainMixerNode.outputVolume = 1 } } } } func pause() { fadePlayPauseTask?.cancel() playPauseCurrentFadeTime = 0 fadePlayPauseTask = Task { [weak self] in guard let self else { return } while true { let volume = updateVolume(for: playPauseCurrentFadeTime / 0.1, rising: false) // Ramp down volume until 0 is reached if volume <= 0 { break } engine.mainMixerNode.outputVolume = volume try await Task.sleep(for: .milliseconds(10)) playPauseCurrentFadeTime += 0.01 } engine.mainMixerNode.outputVolume = 0 playerNode.pause() // Shut down engine once ramp down completes DispatchQueue.global().async { [weak self] in guard let self else { return } engine.pause() } } } private func updateVolume(for x: Double, rising: Bool) -> Float { if rising { // Fade in return Float(pow(x, 2) * (3.0 - 2.0 * (x))) } else { // Fade out return Float(1 - (pow(x, 2) * (3.0 - 2.0 * (x)))) } } func setPitch(_ value: Float) { pitch.pitch = value } func setReverbMix(_ value: Float) { reverb.wetDryMix = value } } struct ContentView: View { @State private var audioManager = AudioEngineManager() @State private var pitch: Float = 0 @State private var reverb: Float = 0 var body: some View { VStack(spacing: 20) { Text("🎵 Audio Player with Reverb & Pitch") .font(.title2) HStack { Button("Prepare") { audioManager.prepare() } Button("Play") { audioManager.play() } .padding() .background(Color.green) .foregroundColor(.white) .cornerRadius(10) Button("Pause") { audioManager.pause() } .padding() .background(Color.red) .foregroundColor(.white) .cornerRadius(10) } VStack { Text("Pitch: \(Int(pitch)) cents") Slider(value: $pitch, in: -2400...2400, step: 100) { _ in audioManager.setPitch(pitch) } } VStack { Text("Reverb Mix: \(Int(reverb))%") Slider(value: $reverb, in: 0...100, step: 1) { _ in audioManager.setReverbMix(reverb) } } } .padding() } }
Replies
1
Boosts
0
Views
282
Activity
Apr ’25
WatchOS: Can a background metronome app coexist with both Runna workout and Spotify playback?
I’m building a standalone Apple Watch metronome app for running. My goal is for these 3 apps to work at the same time: Runna owns the workout session Spotify plays music my app plays a metronome click in the background So far this is what I've found: Using HKWorkout​Session in my metronome app works well with Spotify, but conflicts with Runna and other workout apps, so I removed that. Using watchOS background audio with longFormAudio allows my app run in the background, and it can coexist with Runna. However, it seems to conflict with Spotify playback, and one app tends to stop the other. Is there any supported watchOS audio/background configuration that allows all 3 at once? More specifically this is what I need: another app owns HKWorkout​Session Spotify keeps playing my app keeps generating metronome clicks in the background Or is this simply not supported by current watchOS session/background rules? My metronome uses AVAudio​Engine / AVAudio​Player​Node with generated click audio. Thank you!
Replies
4
Boosts
0
Views
294
Activity
3d
[26] audioTimeRange would still be interesting for .volatileResults in SpeechTranscriber
So experimenting with the new SpeechTranscriber, if I do: let transcriber = SpeechTranscriber( locale: locale, transcriptionOptions: [], reportingOptions: [.volatileResults], attributeOptions: [.audioTimeRange] ) only the final result has audio time ranges, not the volatile results. Is this a performance consideration? If there is no performance problem, it would be nice to have the option to also get speech time ranges for volatile responses. I'm not presenting the volatile text at all in the UI, I was just trying to keep statistics about the non-speech and the speech noise level, this way I can determine when the noise level falls under the noisefloor for a while. The goal here was to finalize the recording automatically, when the noise level indicate that the user has finished speaking.
Replies
6
Boosts
0
Views
757
Activity
Nov ’25
AudioOutputUnitStart takes ~500 ms when using Push-to-Talk framework after beginTransmission
I’m working with the Push-to-Talk (PTT) framework and observing a consistent delay when starting audio capture. Scenario: A PTT call is already active The AVAudioSession is fully configured I request beginTransmission on the PTT channel I start my Audio Unit for recording (AudioOutputUnitStart) Observed behavior: AudioOutputUnitStart takes ~500 ms This happens whether I start the Audio Unit: after didBeginTransmission, or after AVAudioSession didActivate Comparison: Using the same Audio Unit, same format, and same configuration Without the PTT framework, AudioOutputUnitStart takes ~200 ms Additional notes: I am not modifying or reconfiguring AVAudioSession when requesting beginTransmission The audio session is already set up when the PTT call starts There are no interruptions or route changes at the time of starting the Audio Unit Impact: This extra latency is significant for Push-to-Talk use cases where fast transmit start is critical.
Replies
1
Boosts
0
Views
345
Activity
Feb ’26