I'm using a 4 channel USB Audio interface, with 4 microphones, and want to process them through 4 independent effect chains. However the output from AVAudioInputNode is a single 4 channel bus. How can I split this into 4 mono busses? The following code splits the input into 4 copies, and routes them through the effects, but each bus contains all four channels. How can I remap the channels to remove the unwanted channels from the bus? I tried using channelMap on the mixer node but that had no effect. I'm currently using this code primarily on iOS but it should be portable between iOS and MacOS. It would be possible to do this through a Matrix Mixer Node, but that seems completely overkill, for such a basic operation. I'm already using a Matrix Mixer to combine the inputs, and it's not well supported in AVAudioEngine. AVAudioInputNode *inputNode=[engine inputNode]; [inputNode setVoiceProcessingEnabled:NO error:nil]; NSMutableArray *micDestinations=[NSMutableArray arrayWithCapacity:trackCount]; for(i=0;i<trackCount;i++) { fixMicFormat[i]=[AVAudioMixerNode new]; [engine attachNode:fixMicFormat[i]]; // And create reverb/compressor and eq the same way... [engine connect:reverb[i] to:matrixMixerNode fromBus:0 toBus:i format:nil]; [engine connect:eq[i] to:reverb[i] fromBus:0 toBus:0 format:nil]; [engine connect:compressor[i] to:eq[i] fromBus:0 toBus:0 format:nil]; [engine connect:fixMicFormat[i] to:compressor[i] fromBus:0 toBus:0 format:nil]; [micDestinations addObject:[[AVAudioConnectionPoint alloc] initWithNode:fixMicFormat[i] bus:0] ]; } AVAudioFormat *inputFormat = [inputNode outputFormatForBus: 1]; [engine connect:inputNode toConnectionPoints:micDestinations fromBus:1 format:inputFormat];

Is there a way to permanently disable PHASE SDK logging? It seems to be a lot chattier than Apple's other SDKs. While developing a RealityKit app that uses AudioPlaybackController, I must manually hide the PHASE SDK log output several times each day so I can see my app's log messages. Thank you.

My app utilizes background audio to play music files. I have the audio background mode enabled and I initialize the AVAudioSession in playback mode with the mixWithOthers option. And it usually works great while the app is backgrounded. I listen for audio interruptions as well as route changes and I am able to handle them appropriately and I can usually resume my background audio no problem. I discovered an issue while connected to CarPlay though. Roughly 50% of the time when I disconnect from a phone call while connected to CarPlay I get the following error after calling the play() method of my AVAudioPlayer instance: "ATAudioSessionClientImpl.mm:281 activation failed. status = 561015905" If I instead try to start a new audio session I get a similar error: Error Domain=NSOSStatusErrorDomain Code=561015905 "Session activation failed" UserInfo={NSLocalizedDescription=Session activation failed} Like I said, this isn't reproducible 100% of the time and is so far only seen while connected to CarPlay. I don't think Im forgetting so additional capability or plist setting, but if anyone has any clues it would be greatly appreciated. Otherwise this is likely just a bug that I need to report to Apple. One very important note, and reason I believe it's just a bug, is that while I was testing I found that other music apps like Spotify will also fail to resume their audio at the same time my app fails. Another important detail is that when it works successfully I receive the audio session interruption ended notification, and when it doesn't work I only receive a route configuration change or route override notification. From there I am able to still successfully granted background time to execute code, but my call to resume audio fails with the above mentioned error codes.

I created a virtual audio device to capture system audio with a sample rate of 44.1 kHz. After capturing the audio, I forward it to the hardware sound card using AVAudioEngine, also with a sample rate of 44.1 kHz. However, due to the clock sources being unsynchronized, problems occur after a period of playback. How can I retrieve the clock source of the hardware device and set it for the virtual device?

The sysEx struct in the MIDIUniversalMessage struct has a channel member but the System Exclusive (7-Bit) Message doesn't have a channel field. The System Exclusive (7-Bit) Message has a # of bytes field but the sysEx struct doesn't have a nrOfBytes, byteCount or bytesUsed member. It looks like the channel member of the sysEx struct contains the number of used bytes. Is this a mistake in the header or did I misunderstand something?

Hello. My app uses AVAudioRecorder to generate recording files, which are consistently only 4kb in size. Most users generate audio files normally, with only a few users experiencing this phenomenon occasionally. After uninstalling and installing the app, it will work normally, but it will reappear after a period of time. I have compared that the problematic audio files generated each time are fixed and cannot be played. Added the audioRecorderDidFinishRecording proxy method, which shows that the recording was completed normally. The user also reported that the recording is normal, but there is a problem with the generated file. How should I handle this issue? Look forward to your reply. - (void)startRecordWithOrderID:(NSString *)orderID { AVAudioSession *audioSession = [AVAudioSession sharedInstance]; [audioSession setCategory:AVAudioSessionCategoryRecord error:nil]; [audioSession setActive:YES error:nil]; NSMutableDictionary *settings = [[NSMutableDictionary alloc] init]; [settings setObject:[NSNumber numberWithFloat: 8000.0] forKey:AVSampleRateKey]; [settings setObject:[NSNumber numberWithInt: kAudioFormatLinearPCM] forKey:AVFormatIDKey]; [settings setObject:[NSNumber numberWithInt:16] forKey:AVLinearPCMBitDepthKey]; [settings setObject:[NSNumber numberWithInt: 1] forKey:AVNumberOfChannelsKey]; [settings setObject:[NSNumber numberWithBool:NO] forKey:AVLinearPCMIsBigEndianKey]; [settings setObject:[NSNumber numberWithBool:NO] forKey:AVLinearPCMIsFloatKey]; NSString *path = [WDUtility createDirInDocument:@"audios" withOrderID:orderID withPathExtension:@"wav"]; NSURL *tmpFile = [NSURL fileURLWithPath:path]; recorder = [[AVAudioRecorder alloc] initWithURL:tmpFile settings:settings error:nil]; [recorder setDelegate:self]; [recorder prepareToRecord]; [recorder record]; }

I'm developing an iOS app that requires continuous audio recording. Currently, when a phone call comes in, the AVAudioSession is interrupted and recording stops completely during the ringing phase. While I understand recording should stop if the call is answered, my app needs to continue recording while the phone is merely ringing. I've observed that Apple's Voice Memos app maintains recording during incoming call rings. This indicates the hardware and iOS are capable of supporting this functionality. Request Please advise on any available AVAudioSession configurations or APIs that would allow my app to: Continue recording during an incoming call ring Only stop recording if/when the call is actually answered Impact This interruption significantly impacts the user experience and core functionality of my app. Workarounds like asking users to enable airplane mode are impractical and create a poor user experience. Questions Is there an approved way to maintain microphone access during call rings? If not currently possible, could this capability be considered for addition to a future iOS SDK? Are there any interim solutions or best practices Apple recommends for this use case? Thank you for your help. SUPPORT INFORMATION Did someone from Apple ask you to submit a code-level support request? No Do you have a focused test project that demonstrates your issue? Yes, I have a focused test project to submit with my request What code level support issue are you having? Problems with an Apple framework API in my app

Currently, I have successfully used ChannelMap to map hardware input channels and obtained audio data from the hardware device's MIC and OTG inputs. Additionally, I have used ChannelMap to map output channels to freely feed data for playback to each output channel. However, I now have a problem. I have a hardware device that only has output channels (no input channels), and the system has set this hardware device as the default playback device. In this case, how can I obtain the audio data being played to the output channels for modification?

I want the audio session to always use the built-in microphone. However, when using the setPreferredInput() method like in this example private func enableBuiltInMic() { // Get the shared audio session. let session = AVAudioSession.sharedInstance() // Find the built-in microphone input. guard let availableInputs = session.availableInputs, let builtInMicInput = availableInputs.first(where: { $0.portType == .builtInMic }) else { print("The device must have a built-in microphone.") return } // Make the built-in microphone input the preferred input. do { try session.setPreferredInput(builtInMicInput) } catch { print("Unable to set the built-in mic as the preferred input.") } } and calling that function once in the initializer, the audio session still switches to the external microphone once one is plugged in. The session's preferredInput is nil again at that point, even if the built-in microphone is still listed in availableInputs. So, why is the preferredInput suddenly reset? when would be the appropriate time to set the preferredInput again? Observing the session’s availableInputs did not work and setting the preferredInput again in the routeChangeNotification handler seems a bad choice as it’s already a bit too late then.

Hi, I'm new to AVAudioEngine(and macOS programming in general). I'm trying to mix microphone audio with ScreenCaptureKit audio using AVAudioEngine without playing it back. I've created a AVAudioPlayerNode and scheduling buffers in my SCStream handler: playerNode.scheduleBuffer(samples) and have connected the playerNode to the mainMixerNode. audioEngine.connect(audioEngine.inputNode, to: audioEngine.mainMixerNode, format: micFormat) audioEngine.connect(playerNode, to: audioEngine.mainMixerNode, format: format) The problem is that mainMixerNode plays the audio to the speaker creating a feedback loop. How can I prevent the mixer output from being played back. Also: Is this the best way of mixing microphone input with some other input? I ran into AVAudioEngine's manual rendering mode, which seems like the way to go for mixing audio without playing it back. However, I couldn't figure out how to connect microphone input to the AVAudioEngine in manual rendering mode?

Recently, after the update of 26.3 Mac OS (Tahoe), the ordering of my music app has been horrible at best - music disappearing, tracks not aligning with albums (even if the albums are different years). It's created quite a problem, because the disappearing tracks issue seems to be replicating to iOS devices as well (although track numbering and album association seem to be stable). Has anyone else heard of this issue?

I developed an educational app that implements audio-video communication through RTC, while using WebView to display course materials during classes. However, some users are experiencing an issue where the audio playback from WebView is very quiet. I've checked that the AVAudioSessionCategory is set by RTC to AVAudioSessionCategoryPlayAndRecord, and the AVAudioSessionCategoryOption also includes AVAudioSessionCategoryOptionMixWithOthers. What could be causing the WebView audio to be suppressed, and how can this be resolved?

I've filed this as FB21446798 but figured I'd post here too. In the first build of macOS 26.3, playback via ApplicationMusicPlayer is completely broken. When starting playback of anything at all, the console shows the following error: applicationController: xpc service connection interrupted Failed to obtain remoteObject: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service created from an endpoint was invalidated from this process." UserInfo={NSDebugDescription=The connection to service created from an endpoint was invalidated from this process.} Failed to prepareToPlay with error: Error Domain=MPMusicPlayerControllerErrorDomain Code=10 "(null)" UserInfo={NSUnderlyingError=0xc92910ff0 {Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service created from an endpoint was invalidated from this process." UserInfo={NSDebugDescription=The connection to service created from an endpoint was invalidated from this process.}}} In addition, several crash logs for RemotePlayerService are generated, showing my app as the parent process. This issue is 100% repeatable. No matter how I load the queue, whether it’s catalog or library content, any variation I can think of all fails like this. I really hope this can be fixed before 26.3 comes out, otherwise my app will be totally unusable. 😅

I'm getting Crashlytics crashes from some my users, deep in the Apple code: Crashed: AXSpeech EXC_BAD_ACCESS KERN_INVALID_ADDRESS 0x00000007ec54b360 0 libobjc.A.dylib 0x3c9c objc_retain_x8 + 16 1 AudioToolboxCore 0x99580 auoop::RenderPipeUser::~RenderPipeUser() + 112 2 AudioToolboxCore 0xe6090 -[AUAudioUnit_XPC internalDeallocateRenderResources] + 92 3 AVFAudio 0x90a0 AUInterfaceBaseV3::Uninitialize() + 60 4 AVFAudio 0x4cbe0 AVAudioEngineGraph::PerformCommand(AUGraphNodeBaseV3&, AVAudioEngineGraph::ENodeCommand, void*, unsigned int) const + 768 5 AVFAudio 0x56b0c AVAudioEngineGraph::_Uninitialize(NSError**) + 132 6 AVFAudio 0x7834 AVAudioEngineImpl::Stop(NSError**) + 388 7 AVFAudio 0x636c -[AVAudioEngine dealloc] + 52 8 TextToSpeech 0x30674 _TTSNameForVoiceInformation + 20864 9 libobjc.A.dylib 0x20a4 object_cxxDestructFromClass(objc_object*, objc_class*) + 116 10 libobjc.A.dylib 0x6e00 objc_destructInstance + 80 11 libobjc.A.dylib 0x104fc _objc_rootDealloc + 80 12 TextToSpeech 0x2d2f4 _TTSNameForVoiceInformation + 7680 13 TextToSpeech 0x496c TTSVocalizerCopyURLForFallbackResource + 8540 14 TextToSpeech 0x26094 TTSSpeechUnitTestingMode + 5548 15 libAXSpeechManager.dylib 0x108b0 -[AXSpeechManager .cxx_destruct] + 192 16 libobjc.A.dylib 0x20a4 object_cxxDestructFromClass(objc_object*, objc_class*) + 116 17 libobjc.A.dylib 0x6e00 objc_destructInstance + 80 18 libobjc.A.dylib 0x104fc _objc_rootDealloc + 80 19 libAXSpeechManager.dylib 0x5298 -[AXSpeechManager dealloc] + 268 20 Foundation 0x3b8a4 __NSThreadPerformPerform + 272 21 CoreFoundation 0xd3208 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 28 22 CoreFoundation 0xdf864 __CFRunLoopDoSource0 + 176 23 CoreFoundation 0x646c8 __CFRunLoopDoSources0 + 244 24 CoreFoundation 0x7a1c4 __CFRunLoopRun + 828 25 CoreFoundation 0x7f4dc CFRunLoopRunSpecific + 612 26 Foundation 0x420c4 -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 212 27 libAXSpeechManager.dylib 0x13390 -[AXSpeechThread main] + 552 28 Foundation 0x5b634 __NSThread__start__ + 716 29 libsystem_pthread.dylib 0x16b8 _pthread_start + 148 30 libsystem_pthread.dylib 0xb88 thread_start + 8 It's most likely related to my use of AVSpeechSynthesizer. I do change some of the utterance fields, including the voice that's being used (which is set to a value from speechVoices()). UtilAudioIos_tts = AVSpeechSynthesizer() let utterance = AVSpeechUtterance utterance.voice = AVSpeechSynthesisVoice(identifier: voice.voiceCode) utterance.volume = volume utterance.pitchMultiplier = pitch utterance.rate = rate UtilAudioIos_tts!.speak(utterance) By coincidence or not, the following sometimes appears in the device log: 2023-05-30 20:35:29.948078+0100 <appname>[466:12882] [catalog] Unable to list voice folder and also, sometimes: 2023-05-30 20:37:35.345933+0100 <appname>[466:13298] [catalog] Query for com.apple.MobileAsset.VoiceServices.VoiceResources failed: 2 2023-05-30 20:37:35.360854+0100 rehearserfree[466:13433] [AXTTSCommon] MauiVocalizer: 11006 (Can't compile rule): regularExpression=\Oviedo(?=, (\x1b\\pause=\d+\\)?Florida)\b, message=unrecognized character follows \, characterPosition=1 2023-05-30 20:37:35.363163+0100 <appname>[466:13433] [AXTTSCommon] MauiVocalizer: 16038 (Resource load failed): component=ttt/re, uri=, contentType=application/x-vocalizer-rettt+text, lhError=88602000 2023-05-30 20:37:35.363182+0100 <appname>[466:13433] [AXTTSCommon] Error loading rules: 2147483648 All of these crashes have been on the various versions of iOS 16. Edit: I can't reproduce the crash myself - it's just some (not all) app users. The log entries above appear locally on my device (with no crash) but I can't see the logs of the users who have the crashes. Any idea what this might be caused by, or how to go about tracking the problem down?

Hi, when a CoreMIDI driver controls physical HW it is probably quite commune to have to control the amount of MIDI data received from the system. What comes to mind is to just delay returning control of the MIDIDriverInterface::Send() callback to the calling process. While the application trying to send MIDI really stalls until the callback returns it seems only to be a side effect of a generally stalled CoreMIDI server. Between the callbacks the application can send as much MIDI data as it wants to CoreMIDI, it's buffering seems to be endless... However the HW might not be able to play out all the data. It seems there is no way to indicate an overflow/full buffer situation back the application/CoreMIDI. How is this supposed to work? Thanks, any hints or pointers are highly appreciated! Hagen.

I'm using AVFoundation to make a multi-track editor app, which can insert multiple track and clip, including scale some clip to change the speed of the clip, (also I'm not sure whether AVFoundation the best choice for me) but after making the scale with scaleTimeRange API, there is some short noise sound in play back. Also, sometimes it's fine when play AVMutableCompostion using AVPlayer with AVPlayerItem, but after exporting with AVAssetReader, will catch some short noise sounds in result file.... Not sure why. Here is the example project, which can build and run directly. https://github.com/luckysmg/daily_images/raw/refs/heads/main/TestDemo.zip

Environment Device: iPhone 16e iOS Version: 18.4.1 - 18.7.1 Framework: AVFoundation (AVAudioEngine) Problem Summary On iPhone 16e (iOS 18.4.1-18.7.1), the installTap callback stops being invoked after resuming from a phone call interruption. This issue is specific to phone call interruptions and does not occur on iPhone 14, iPhone SE 3, or earlier devices. Expected Behavior After a phone call interruption ends and audioEngine.start() is called, the previously installed tap should continue receiving audio buffers. Actual Behavior After resuming from phone call interruption: Tap callback is no longer invoked No audio data is captured No errors are thrown Engine appears to be running normally Note: Normal pause/resume (without phone call interruption) works correctly. Steps to Reproduce Start audio recording on iPhone 16e Receive or make a phone call (triggers AVAudioSession interruption) End the phone call Resume recording with audioEngine.start() Result: Tap callback is not invoked Tested devices: iPhone 16e (iOS 18.4.1-18.7.1): Issue reproduces ✗ iPhone 14 (iOS 18.x): Works correctly ✓ iPhone SE 3 (iOS 18.x): Works correctly ✓ Code Initial Setup (Works) let inputNode = audioEngine.inputNode inputNode.installTap(onBus: 0, bufferSize: 4096, format: nil) { buffer, time in self.processAudioBuffer(buffer, at: time) } audioEngine.prepare() try audioEngine.start() Interruption Handling NotificationCenter.default.addObserver( forName: AVAudioSession.interruptionNotification, object: AVAudioSession.sharedInstance(), queue: nil ) { notification in guard let userInfo = notification.userInfo, let typeValue = userInfo[AVAudioSessionInterruptionTypeKey] as? UInt, let type = AVAudioSession.InterruptionType(rawValue: typeValue) else { return } if type == .began { self.audioEngine.pause() } else if type == .ended { try? self.audioSession.setActive(true) try? self.audioEngine.start() // Tap callback doesn't work after this on iPhone 16e } } Workaround Full engine restart is required on iPhone 16e: func resumeAfterInterruption() { audioEngine.stop() inputNode.removeTap(onBus: 0) inputNode.installTap(onBus: 0, bufferSize: 4096, format: nil) { buffer, time in self.processAudioBuffer(buffer, at: time) } audioEngine.prepare() try audioSession.setActive(true) try audioEngine.start() } This works but adds latency and complexity compared to simple resume. Questions Is this expected behavior on iPhone 16e? What is the recommended way to handle phone call interruptions? Why does this only affect iPhone 16e and not iPhone 14 or SE 3? Any guidance would be appreciated!

My app encountered problems when trying to open an x86 audioUnit v2 on a Silicon Mac (although Rosetta is installed). There seems to be a XPC connection issue with the AUHostingService that I don't know how to fix. I observed other host apps opening the same plugins without problem, so there is probably something wrong or incompatible in my codes. I noticed that: The issue occurs whether or not the app is sandboxed. The issue does no longer occur when the app itself runs under Rosetta. There is no error reported by CoreAudio during allocation and initialization of the audio unit. The first notified errors appears when the unit calls AudioUnitRender from the rendering callback. With most x86 plugins, the error is on first call: kAudioUnitErr_RenderTimeout and on any subsequent call: kAudioComponentErr_InstanceInvalidated On the UI side, when the Cocoa View is loaded, it appears shortly, then disappears immediately leaving its superview empty. With another x86 plugin, the Cocoa View is loaded normally, but CoreAudio still emits kAudioUnitErr_NoConnection from AudioUnitRender, whether the view has been loaded or not, and the plugin produces no sound. I also find these messages in the console (printed in that order): CLIENT ERROR: RemoteAUv2ViewController does not override - and thus cannot react to catastrophic errors beyond logging them AUAudioUnit_XPC.mm:641 Crashed AU possible component description: aumu/Helm/Tyte My app uses the AUv2 API and I suspect that working with the AUv3 API would spare me these problems. However, considering how my audio system is built (audio units are wrapped into C++ classes and most connections between units are managed on the fly from the rendering callback), it would be a lot of work to convert, and I’m even not sure that all I do with the AUv2 API would be possible with the AUv3 API. I could possibly find an intermediate solution, but in the immediate future I'm looking for the simplest and fastest possible fix. If I cannot find better, I see two fallback options: In this part of the doc: “Beginning with macOS 11, the system loads audio units into a separate process that depends on the architecture or host preference”, does “host preference” means that it would be possible to disable the “out of process” behavior, for example from the app entitlements or info.plist? Otherwise, as a last resort, I could completely disable the use of x86 audioUnits when my app runs under ARM64, for at least making things cleaner. But the Audio Component API doesn’t give any info about the plugin architecture, how could I found it? Any tip or idea about this issue will be much appreciated. Thanks in advance!

FaceTime’s screen-share audio balance is insanely absurd right now. Whenever I share media, the system audio that gets sent through FaceTime is a tiny whisper even at full volume (or even when connected to my speaker or headphones). The moment anyone on the call makes any noise at all, the shared audio ducks so hard it disappears, while the voice (or rustling or air conditioning noise) spikes to painful levels. It’s impossible to watch or listen to anything together. Also, the feature where FaceTime would shrink to a square during screen-sharing has been completely removed. That was a good feature and I'm really confused why it's gone. Now, the FaceTime window stays as a long rectangle that covers part of the content I'm trying to share (unless I do full screen tile, but then I can't pull up any other windows during the call) and can't be made smaller than about a third of the screen. You can't resize the window or adjust its dimensions, so it ends up blocking the actual media you're trying to watch. Here are some feature requests/fixes that would greatly improve the FaceTime screen-share experience: Option to adjust the shared media volume independently of call audio. Disable/toggle the extreme automatic audio docking while screen-sharing Reintroduce the minimized “floating square” mode or allow full manual resizing and repositioning of the FaceTime window during screen-share sessions. Overall, this setup makes FaceTime screen-sharing basically unusable. The audio balance is so inconsistent that it’s easier to switch to Zoom or Google Meet, which both handle shared sound correctly and let you move the call window out of the way. Until these issues are fixed, there’s no practical reason to use FaceTime for shared viewing at all.

Hi all, I have been quite stumped on this behavior for a little bit now, so thought it best to share here and see if someone more experience with AVAudioEngine / AVAudioSession can weigh in. Right now I have a AVAudioEngine that I am using to perform some voice chat with and give buffers to play. This works perfectly until route changes start to occur, which causes the AVAudioEngine to reset itself, which then causes all players attached to this engine to be stopped. Once a AVPlayerNode gets stopped due to this (but also any other time), all samples that were scheduled to be played then get purged. Where this becomes confusing for me is the completion handler gets called every time regardless of the sound actually being played. Is there a reliable way to know if a sample needs to be rescheduled after a player has been reset? I am not quite sure in my case what my observer of AVAudioEngineConfigurationChange needs to be doing, as this engine only handles output. All input is through a separate engine for simplicity. Currently I am storing a queue of samples as they get sent to the AVPlayerNode for playback, and after that completion checking if the player isPlaying or not. If it's playing I assume that the sound actually was played- and if not then I leave it in the queue and assume that an observer on the route change or the configuration change will realize there are samples in the queue and reset them Thanks for any feedback!