Hi there, I recently launched a dj app to the mac app store, and was wondering how I could access songs for mixing purposes via Apple Music just like how serato, rekordbox, djay, and other DJ apps do? Thanks, Gunek

When multiple identical songs are added to a playlist, Playlist.Entry.id uses a suffix-based identifier (e.g. songID_0, songID_1, etc.). Removing one entry causes others to shift, changing their .id values. This leads to diffing errors and collection view crashes in SwiftUI or UIKit when entries are updated. Steps to Reproduce: Add the same song to a playlist multiple times. Observe .id.rawValue of entries (e.g. i.SONGID_0, i.SONGID_1). Remove one entry. Fetch playlist again — note the other IDs have shifted. FB18879062

Hello there! Is there any list of voices that are always available on iOS/iPadOS devices? It seems that AVSpeechSynthesisVoice(identifier: "com.apple.voice.compact.en-US.Samantha") is always available on all devices. I thought that AVSpeechSynthesisVoice(identifier: "com.apple.ttsbundle.siri_Nicky_en-US_compact") and AVSpeechSynthesisVoice(identifier: "com.apple.ttsbundle.siri_Aaron_en-US_compact") were available by default on certain newer devices. Is this true? I also noticed that on the same iPad where I was using those 2 voices (Nicky and Aaron) - when I updated to the iPadOS 26 beta, those voices were no longer available. Any information you can share about which voices should be reliably available on which devices would be extremely helpful for our development. Thanks so much!

Hi all, I’ve implemented the new Core Audio Tap API (AudioHardwareCreateProcessTap with CATapDescription) and I’m seeing consistent level attenuation that scales with the number of stereo output pairs exposed by the target device. What I observe Device with 4 stereo pairs (8 outs) → tap shows −12.04 dB relative to source. True 2-ch devices (built-in speakers, AirPods) → ~0 dB attenuation. The attenuation appears regardless of whether I: Create a global (default-output) tap via initStereoGlobalTapButExcludeProcesses: Or create a per-process/per-device tap via initWithProcesses:andDeviceUID:withStream: Additionally, the routing choice inside the sending app matters: App output to “System/Default Output” → I often see no attenuation. App output directly to a multi-out interface (e.g., RME Fireface) → I see the pair-count-scaled attenuation. I can query Core Audio for the number of output channels/pairs and gain-compensate (+20·log10(N_pairs) dB) and that matches my measurements for many cases. However, this compensation is not universally correct because it seems to depend on where each process routes its audio (Default Output vs. direct device), even when those processes are included in the same tap aggregate. Question Is there a supported way to obtain the raw, unattenuated streams for all processes through the Tap API—i.e., to bypass this automatic headroom/attenuation behavior entirely? If this attenuation is expected by design: Is there a documented rule for when it applies (global vs. device taps, per-process taps, stream selection, etc.)? Is there a property/flag to disable it, or a reliable, official method to compute the exact compensation (beyond counting stereo pairs)? Any guidance on ensuring consistent levels when multiple processes route differently (Default Output vs. direct device) but are captured by the same tap? Environment API: AudioHardwareCreateProcessTap + CATapDescription Devices: built-in output (2-ch), RME Fireface (8+ outs / 4+ stereo pairs) Behavior reproducible with both global and per-process/per-device tap descriptions. Attenuation example: 4 stereo pairs → −12.04 dB observed. Happy to provide a minimal sample, measurements, and device logs. Thanks! — David

My app Balletrax is a music player for people to use while they teach ballet. Used to be you could silence notifications during use, but now the customer seems to have to know how to use Focus mode, remember to turn it on and off, and have to check the notifications one does and doesn't want to use. Is there no way to silence all notifications when the app is in use?

I have a Catalyst app ('container') which hosts an embedded AUv3 Audio Unit extension ('plugin'). This used to work for years and has worked with this project until a few days ago. it still works on iOS as expected on MacOS the extension is never registered/installed and won't load extension won't show up with AUVal seems to have stopped working with the 26.1 XCode update I'm fairly certain the problem is not code related (i.e. likely build settings, project settings, entitlements, signing, etc.) I have compared all settings with another still-working project and can't find any meaningful difference (I can't request code-level support because even the minimal thing vastly exceeds the 250 lines of code limit.) How can I debug the issue? I literally don't know where to start to fix this problem, short of rebuilding the entire thing and hope that it magically starts working again.

Environment→ ・Device: iPad 10th generation ・OS：**iOS18.3.2 We're using AVAudioPlayer to play a sound when a button is tapped. In our use case, this button can be tapped very frequently — roughly every 0.1 to 0.2 seconds. Each tap triggers the following function: var audioPlayer: AVAudioPlayer? func soundPlay(resource: String, type: String){ guard let path = Bundle.main.path(forResource: resource, ofType: type) else { return } do { audioPlayer = try AVAudioPlayer(contentsOf: URL(fileURLWithPath: path)) audioPlayer!.delegate = self try audioSession.setCategory(.playback) } catch { return } self.audioPlayer!.play() } The issue is that under high-frequency tapping (especially around 0.1–0.15s intervals), the app occasionally crashes. The crash does not occur every time, but it happens randomly — sometimes within 30 seconds, within 1 minute, or even 3 minutes of continuous tapping. Interestingly, adding a delay of 0.2 seconds between button taps seems to prevent the crash entirely. Delays shorter than 0.2 seconds (e.g.,0.15s,0.18s) still result in occasional crashes. My questions are: **Is this expected behavior from AVAudioPlayer or AVAudioSession? Could this be a known issue or a limitation in AVFoundation? Is there any documentation or guidance on handling frequent sound playback safely?** Any insights or recommendations on how to handle rapid, repeated audio playback more reliably would be appreciated.

When using the Apple Devices to sync Apple Music to iPhone where is the Apple Devices backup being written to? Apple Devices->music->sync. Not trying to backup the iPhone via Apple Devices app.

Environment Windows 11 [edition/build]: [e.g., 23H2, 22631.x] Apple Music for Windows version: [e.g., 1.x.x from Microsoft Store] Library folder: C:\Users<user>\Music\Apple Music\Apple Music Library.musiclibrary Summary I need a supported way to programmatically enumerate the local Apple Music library on Windows (track file paths, playlists, etc.) for reconciliation with the on-disk Media folder. On macOS this used to be straightforward via scripting/export; on Windows I can’t find an equivalent. What I’m seeing in the library bundle Library.musicdb → not SQLite. First 4 bytes: 68 66 6D 61 ("hfma"). Library Preferences.musicdb → also starts with "hfma". artwork.sqlite → SQLite but appears to be artwork cache only (no track file paths). Extras.itdb → has SQLite format 3 header but (from a quick scan) not seeing track locations. Genius.itdb → not a SQLite database on this machine. What I’ve tried Attempted to open Library.musicdb with SQLite providers → error: “file is not a database.” Binary/string scans (ASCII, UTF-16LE/BE, null-stripped) of Library.musicdb → did not reveal file paths or obvious plist/XML/JSON blobs. The Windows Apple Music UI doesn’t appear to expose “Export Library / Export Playlist” like legacy iTunes did, and I can’t find a public API for local library enumeration on Windows. What I’m trying to accomplish Read local track entries (absolute or relative paths), detect broken links, and reconcile against the Media folder. A read-only solution is fine; I do not need to modify the library. Questions for Apple Is the Library.musicdb file format documented anywhere, or is there a supported SDK/API to enumerate the local library on Windows? Is there a supported export mechanism (CLI, UI, or API) on Windows Apple Music to dump the local library and/or playlists (XML/CSV/JSON)? Is there a Windows-specific equivalent to the old iTunes COM automation or any MusicKit surface that can return local library items (not streaming catalog) and their file locations? If none of the above exist today, is there a recommended workaround from Apple for library reconciliation on Windows (e.g., documented support for importing M3U/M3U8 to rebuild the local library from disk)? Are there any plans/timeline for adding Windows feature parity with iTunes/Music on macOS for exporting or scripting the local library? Why this matters For large personal libraries, users occasionally end up with orphaned files on disk or broken links in the app. Without an export or API, it’s difficult to audit and fix at scale on Windows. Reference details (in case it helps triage) Library.musicdb header bytes: 68-66-6D-61-A0-00-00-00-10-26-34-00-15-00-01-00 (ASCII shows hfma…). artwork.sqlite is readable but doesn’t contain track file paths (appears limited to artwork). I can supply a minimal repro tool and logs if that’s helpful. Feature request (if no current API) Add an official Export Library/Playlists action on Windows Apple Music, or Provide a read-only Windows API (or schema doc) that surfaces track file locations and playlist membership from the local library. Thanks in advance for any guidance or pointers to docs I might have missed.

Let's consider the following code. I've created an actor that loads a list of .mp3 files from a Bundle and then makes it available for audio reproduction. Unfortunately, I'm experiencing a memory leak. At the play method. player.play() From Instruments I get _malloc_type_malloc_outlined libsystem_malloc.dylib start_wqthread libsystem_pthread.dylib private actor AudioActor { enum Failure: Error { case soundsNotLoaded([AudioPlayerClient.Sound: Error]) } enum Player { case music(AVAudioPlayer) } var players: [Sound: Player] = [:] let bundles: [Bundle] init(bundles: UncheckedSendable<[Bundle]>) { self.bundles = bundles.wrappedValue } func load(sounds: [Sound]) throws { try AVAudioSession.sharedInstance().setActive(true, options: []) var errors: [Sound: Error] = [:] for sound in sounds { guard let url = bundle.url(forResource: sound.name, withExtension: "mp3") else { continue } do { self.players[sound] = try .music(AVAudioPlayer(contentsOf: url)) } catch { errors[sound] = error } } guard errors.isEmpty else { throw Failure.soundsNotLoaded(errors) } } func play(sound: Sound, loops: Int?) throws { guard let player = self.players[sound] else { return } switch player { case let .music(player): player.numberOfLoops = loops ?? -1 player.play() } } func stop(sound: Sound) throws { guard let player = self.players[sound] else { throw Failure.soundsNotLoaded([:]) } switch player { case let .music(player): player.stop() } } }

In my app I use AVAssetReaderTrackOutput to extract PCM audio from a user-provided video or audio file and display it as a waveform. Recently a user reported that the waveform is not in sync with his video, and after receiving the video I noticed that the waveform is in fact double as long as the video duration, i.e. it shows the audio in slow-motion, so to speak. Until now I was using CMFormatDescription.audioStreamBasicDescription.mSampleRate which for this particular user video returns 22'050. But in this case it seems that this value is wrong... because the audio file has two audio channels with different sample rates, as returned by CMFormatDescription.audioFormatList.map({ $0.mASBD.mSampleRate }) The first channel has a sample rate of 44'100, the second one 22'050. If I use the first sample rate, the waveform is perfectly in sync with the video. The problem is given by the fact that the ratio between the audio data length and the sample rate multiplied by the audio duration is 8, double the ratio for the first audio file (4). In the code below this ratio is given by Double(length) / (sampleRate * asset.duration.seconds) When commenting out the line with the sampleRate variable definition in the code below and uncommenting the following line, the ratios for both audio files are 4, which is the expected result. I would expect audioStreamBasicDescription to return the correct sample rate, i.e. the one used by AVAssetReaderTrackOutput, which (I think) somehow merges the stereo tracks. The documentation is sparse, and in particular it’s not documented whether the lower or higher sample rate is used; in this case, it seems like the higher one is used, but audioStreamBasicDescription for some reason returns the lower one. Does anybody know why this is the case or how I should extract the sample rate of the produced PCM audio data? Should I always take the higher one? I created FB19620455. let openPanel = NSOpenPanel() openPanel.allowedContentTypes = [.audiovisualContent] openPanel.runModal() let url = openPanel.urls[0] let asset = AVURLAsset(url: url) let assetTrack = asset.tracks(withMediaType: .audio)[0] let assetReader = try! AVAssetReader(asset: asset) let readerOutput = AVAssetReaderTrackOutput(track: assetTrack, outputSettings: [AVFormatIDKey: Int(kAudioFormatLinearPCM), AVLinearPCMBitDepthKey: 16, AVLinearPCMIsBigEndianKey: false, AVLinearPCMIsFloatKey: false, AVLinearPCMIsNonInterleaved: false]) readerOutput.alwaysCopiesSampleData = false assetReader.add(readerOutput) let formatDescriptions = assetTrack.formatDescriptions as! [CMFormatDescription] let sampleRate = formatDescriptions[0].audioStreamBasicDescription!.mSampleRate //let sampleRate = formatDescriptions[0].audioFormatList.map({ $0.mASBD.mSampleRate }).max()! print(formatDescriptions[0].audioStreamBasicDescription!.mSampleRate) print(formatDescriptions[0].audioFormatList.map({ $0.mASBD.mSampleRate })) if !assetReader.startReading() { preconditionFailure() } var length = 0 while assetReader.status == .reading { guard let sampleBuffer = readerOutput.copyNextSampleBuffer(), let blockBuffer = sampleBuffer.dataBuffer else { break } length += blockBuffer.dataLength } print(Double(length) / (sampleRate * asset.duration.seconds))

Hi. I work on an audio app for iOS which is successfully using the MPRemoteCommandCenter for commands like next, back, skip forward, skip backward etc. I am trying to implement playback rate controls in my app (so that users can change the playback speed of audio to 0.5x or 2x for example). While the above commands work, the changePlaybackRateCommand does not seem to. I have enabled the command, given it a target/handler and set supported rates. With the other commands, this caused the UI to change on lock screen, in command center etc, by adding the control for the command (a next button for the next command for example). However, it does not seem to do anything for the playback rate command. I can implement my own "rate button" UI and rate change handling, but I'm wondering if this is a known bug within Apple? Looking online, it seems other people face the same issue and haven't been able to get this command to work. Why is this API provided if it doesn't seem to do anything? Is there something I'm missing? Kind regards.

Hi, I’m an iOS developer building an app with an use case that needs advanced playback on Apple Music subscription streams, specifically: • Real-time tempo change (BPM) during playback — i.e., time-stretch with key-lock, not just crossfade. • Beat-matched transitions between tracks. From what I can tell, this capability seems to exist only for approved partners and isn’t available through public MusicKit. Question: What’s the official request path to be evaluated for that restricted partner entitlement (application form, questionnaire, NDA, or internal team/BD contact)? If the entitlement identifier is internal, how can I get my account routed to the right Apple Music team? For reference, publicly announced partners include Algoriddim djay, Serato DJ Pro, rekordbox (AlphaTheta), and Engine DJ—all of which appear to implement mixing features that imply advanced playback (tempo/beat-matching) on Apple Music content. I’d prefer not to share product details publicly for the moment and can provide specifics privately if needed. Thanks in advance!

Among the millions of users of our online product, we have identified through data metrics that the silent audio data capture rate on iPadOS 18.4.1 or 18.5 has increased abnormally. However, we are unable to reproduce the issue. Has anyone encountered a similar issue? The parameters we used are as follows: AudioSession: category:AVAudioSessionCategoryPlayAndRecord mode:AVAudioSessionModeDefault option:77 preferredSampleRate:48000.000000 preferredIOBufferDuration:0.010000 AudioUnit format.mFormatID = kAudioFormatLinearPCM; format.mSampleRate = 48000.0; format.mChannelsPerFrame = 2; format.mBitsPerChannel = 16; format.mFramesPerPacket = 1; format.mBytesPerFrame = format.mChannelsPerFrame * 16 / 8; format.mBytesPerPacket = format.mBytesPerFrame * format.mFramesPerPacket; format.mFormatFlags = kAudioFormatFlagsNativeEndian | kLinearPCMFormatFlagIsPacked | kLinearPCMFormatFlagIsSignedInteger; component.componentType = kAudioUnitType_Output; component.componentSubType = kAudioUnitSubType_RemoteIO; component.componentManufacturer = kAudioUnitManufacturer_Apple; component.componentFlags = 0; component.componentFlagsMask = 0;

I'm working on adding CarPlay support to an audio app and am running into an issue. Occasionally, when a user opens the app from CarPlay while the main app scene is either not connected or is currently in the background, I will receive an error when attempting to activate the audio session. The code below mimics my setup: do { try AVAudioSession.sharedInstance().setCategory(.playback, mode: .spokenAudio) try AVAudioSession.sharedInstance().setActive(true) } catch { print(error) // NSOSStatusErrorDomain - 560557684: Session activation failed } That error code maps to AVAudioSession.ErrorCode.cannotInterruptOthers. Once in this state, all subsequent attempts to play different pieces of content will fail. However, things will start working normally if the user opens the app on their phone and tries again from CarPlay (while the app is in the foreground on their phone). I'm not sure why it would behave this way and want to note that I do have the audio background mode capability enabled. Has anyone else encountered this? Are there any workarounds or changes I could make to prevent this from happening?

Issue Description I'm implementing a system audio capture feature using AudioHardwareCreateProcessTap and AudioHardwareCreateAggregateDevice. The app successfully creates the tap and aggregate device, but when starting the IO procedure with AudioDeviceStart, it sometimes fails with OSStatus error 1852797029. (The operation couldn’t be completed. (OSStatus error 1852797029.)) The error occurs inconsistently, which makes it particularly difficult to debug and reproduce. Questions Has anyone encountered this intermittent "nope" error code (0x6e6f7065) when working with system audio capture? Are there specific conditions or system states that might trigger this error sporadically? Are there any known workarounds for handling this intermittent failure case? Any insights or guidance would be greatly appreciated. I'm wondering if anyone else has encountered this specific "nope" error code (0x6e6f7065) when working with system audio capture.

ApplicationMusicPlayer is not available on watchOS but all other platforms. Is there a technical reason for that like battery life? Same goes for SystemMusicPlayer and MPMusicPlayerController. I already filed feedbacks for that.

hi, i need to read wether the transport is playing or stopped but my current method that works for vst does not work for au. is there a lpx resource available for developers anywhere? if (auto* playHead = processor->getPlayHead()) { juce::AudioPlayHead::CurrentPositionInfo posInfo; if (playHead->getCurrentPosition(posInfo)) { bool isCurrentlyPlaying = posInfo.isPlaying; if (isCurrentlyPlaying != wasTransportPlaying) { if (isCurrentlyPlaying) { wasTransportPlaying = isCurrentlyPlaying; startAllTimers(); } else { wasTransportPlaying = isCurrentlyPlaying; stopAllTimers(); } } } } thanks :)

In iOS 18, CarPlay shows an error: “There was a problem loading this content” after playback starts. Audio works fine, but the Now Playing screen doesn’t load. I’m using MPPlayableContentManager. This worked fine in iOS 17. Anyone else seeing this error in iOS 18?

I developed an educational app that implements audio-video communication through RTC, while using WebView to display course materials during classes. However, some users are experiencing an issue where the audio playback from WebView is very quiet. I've checked that the AVAudioSessionCategory is set by RTC to AVAudioSessionCategoryPlayAndRecord, and the AVAudioSessionCategoryOption also includes AVAudioSessionCategoryOptionMixWithOthers. What could be causing the WebView audio to be suppressed, and how can this be resolved?