Prioritize user privacy and data security in your app. Discuss best practices for data handling, user consent, and security measures to protect user information.

All subtopics
Posts under Privacy & Security topic

Post

Replies

Boosts

Views

Activity

Privacy & Security Resources
General: Forums topic: Privacy & Security Privacy Resources Security Resources Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com"
0
0
538
Jul ’25
apple sign in error
I am asking about the apple Sign in implementation. ▫️ problems eas local build or test flight, I get a “Could not complete registration” message. When I check the console, I see the following error message. akd SRP authentication with server failed! Error: Error Domain=com.apple.AppleIDAuthSupport Code=2 UserInfo={NSDescription=<private>, Status=<private>} ▫️ Assumption ・Developed with Expo ・"expo-apple-authentication":"^7.2.4" ・Two apps are developed at the same time, using supabase, firebase, but both have the same error ・On Xcode, on app ids, apple sign in capability is turned on ・Service ids is set to domain, return url ・keys is created ・Internal test of testfligt is set to deliver
0
0
76
Jun ’25
Password AutoFill does not pick up saved password in developer mode
Without developer mode, I was able to get Password AutoFill to work in my SwiftUI app with my local Vapor server using ngrok and adding the Associated Domains capability with the value webcredentials:....ngrok-free.app and the respective apple-app-site-association file on my local server in /.well-known/. (works on device, but not in the simulator). However, if I use the developer mode (webcredentials:....ngrok-free.app?mode=developer) it only works halfway when running from Xcode: I get asked to save the password, but the saved passwords are not picked up, when I try to login again. Neither on device, nor in the simulator. If I remove the ?mode=developer it seems to work as expected. Is this by design, or am I missing something? var body: some View { ... Section(header: Text("Email")) { TextField("Email", text: $viewModel.credentials.username) .textContentType(.username) .autocapitalization(.none) .keyboardType(.emailAddress) } Section(header: Text("Passwort")) { SecureField("Passwort", text: $viewModel.credentials.password) .textContentType(.password) } ... }
0
0
237
May ’25
Group with an existing primary App ID Change
Is it possible to change the Primary App ID set in the Group with an existing primary App ID to another Primary App ID within the same group If there is a change, whether the sub values of the token will be changed upon successful login If an app corresponding to the existing Group Primary App ID is deleted from the app store, ask whether or not other apps in the same group are affected and what effect it will have If anyone knows about the above, please let me know please
0
0
125
Apr ’25
Update ASCredentialIdentityStore for new Autofill PassKey registration
I have an Autofill Passkey Provider working for Safari and Chrome via WebAuthn protocol. Unfortunately, Chrome will not offer my extension as a logon credential provider unless I add the credential to the ASCredentialIdentityStore. I wonder what is the best way to access the ASCredentialIdentityStore from an AutoFill extension? I understand I cannot access it directly from the extension context, so what is the best way to trigger my container app to run, based on a new WebAuthn registration? The best I can think of so far is for the www site to provide an App Link to launch my container app as part of the registration ceremony. Safari will offer my extension even without adding it to the ASCredentialIdentityStore, so I guess I should file a request with Chrome to work this way too, given difficulty of syncing ASCredentialIdentityStore with WebAuthn registration.
0
0
88
Oct ’25
Crash Detection / Emergency SOS: desafios reais de segurança pessoal em escala
Estou compartilhando algumas observações técnicas sobre Crash Detection / Emergency SOS no ecossistema Apple, com base em eventos amplamente observados em 2022 e 2024, quando houve chamadas automáticas em massa para serviços de emergência. A ideia aqui não é discutir UX superficial ou “edge cases isolados”, mas sim comportamento sistêmico em escala, algo que acredito ser relevante para qualquer time que trabalhe com sistemas críticos orientados a eventos físicos. Contexto resumido A partir do iPhone 14, a Detecção de Acidente passou a correlacionar múltiplos sensores (acelerômetros de alta faixa, giroscópio, GPS, microfones) para inferir eventos de impacto severo e acionar automaticamente chamadas de emergência. Em 2022, isso resultou em um volume significativo de falsos positivos, especialmente em atividades com alta aceleração (esqui, snowboard, parques de diversão). Em 2024, apesar de ajustes, houve recorrência localizada do mesmo padrão. Ponto técnico central O problema não parece ser hardware, nem um “bug pontual”, mas sim o estado intermediário de decisão: Aceleração ≠ acidente Ruído ≠ impacto real Movimento extremo ≠ incapacidade humana Quando o classificador entra em estado ambíguo, o sistema depende de uma janela curta de confirmação humana (toque/voz). Em ambientes ruidosos, com o usuário em movimento ou fisicamente ativo, essa confirmação frequentemente falha. O sistema então assume incapacidade e executa a ação fail-safe: chamada automática. Do ponto de vista de engenharia de segurança, isso é compreensível. Do ponto de vista de escala, é explosivo. Papel da Siri A Siri não “decide” o acidente, mas é um elo sensível na cadeia humano–máquina. Falhas de compreensão por ruído, idioma, respiração ofegante ou ausência de resposta acabam sendo interpretadas como sinal de emergência real. Isso é funcionalmente equivalente ao que vemos em sistemas automotivos como o eCall europeu, quando a confirmação humana é inexistente ou degradada. O dilema estrutural Há um trade-off claro e inevitável: Reduzir falsos negativos (não perder um acidente real) Aumentar falsos positivos (chamadas indevidas) Para o usuário individual, errar “para mais” faz sentido. Para serviços públicos de emergência, milhões de dispositivos errando “para mais” criam ruído operacional real. Por que isso importa para developers A Apple hoje opera, na prática, um dos maiores sistemas privados de segurança pessoal automatizada do mundo, interagindo diretamente com infraestrutura pública crítica. Isso coloca Crash Detection / SOS na mesma categoria de sistemas safety-critical, onde: UX é parte da segurança Algoritmos precisam ser auditáveis “Human-in-the-loop” não pode ser apenas nominal Reflexões abertas Alguns pontos que, como developer, acho que merecem discussão: Janelas de confirmação humana adaptativas ao contexto (atividade física, ruído). Cancelamento visual mais agressivo em cenários de alto movimento. Perfis de sensibilidade por tipo de atividade, claramente comunicados. Critérios adicionais antes da chamada automática quando o risco de falso positivo é estatisticamente alto. Não é um problema simples, nem exclusivo da Apple. É um problema de software crítico em contato direto com o mundo físico, operando em escala planetária. Justamente por isso, acho que vale uma discussão técnica aberta, sem ruído emocional. Curioso para ouvir perspectivas de quem trabalha com sistemas similares (automotivo, wearables, safety-critical, ML embarcado). — Rafa
0
0
196
Jan ’26
App Sandbox Resources
General: Forums subtopic: Privacy & Security > General Forums tag: App Sandbox App Sandbox documentation App Sandbox Design Guide documentation — This is no longer available from Apple. There’s still some info in there that isn’t covered by the current docs but, with the latest updates, it’s pretty minimal (r. 110052019). Still, if you’re curious, you can consult an old copy [1]. App Sandbox Temporary Exception Entitlements archived documentation — To better understand the role of temporary exception entitlements, see this post. Embedding a command-line tool in a sandboxed app documentation Discovering and diagnosing App Sandbox violations (replaces the Viewing Sandbox Violation Reports forums post) Resolving App Sandbox Inheritance Problems forums post The Case for Sandboxing a Directly Distributed App forums post Implementing Script Attachment in a Sandboxed App forums post Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" [1] For example, this one archived by the Wayback Machine.
0
0
2.9k
Jul ’25
App Attest API – "DCErrorInvalidKey 3" after App or OS Update
Hi everyone, We are using the App Attest API to securely transition users to our new system. As part of this, we store the Key ID of the attestation key for each user to verify their identity later. However, we’ve noticed that some users are encountering the error “DCErrorInvalidKey 3” when calling generateAssertion. Importantly, the key was previously successfully attested, and generateAssertion has worked before for these users. Our questions: Could this error be caused by an app or iOS update? Is it problematic to link an attestation key's Key ID directly to a user, or are there scenarios where the key might change or become invalid? If there’s a way to mitigate this issue or recover affected users, what best practices would you recommend? Any help or shared experiences would be greatly appreciated! Thanks in advance.
0
4
290
Apr ’25
ASWebAuthenticationSession: Form submit fails on TestFlight unless submitted through Keychain autofill
I'm experiencing a strange issue where ASWebAuthenticationSession works perfectly when running from Xcode (both Debug and Release), but fails on TestFlight builds. The setup: iOS app using ASWebAuthenticationSession for OIDC login (Keycloak) Custom URL scheme callback (myapp://) prefersEphemeralWebBrowserSession = false The issue: When using iOS Keychain autofill (with Face ID/Touch ID or normal iphone pw, that auto-submits the form) -> works perfectly When manually typing credentials and clicking the login button -> fails with white screen When it fails, the form POST from Keycloak back to my server (/signin-oidc) never reaches the server at all. The authentication session just shows a white screen. Reproduced on: Multiple devices (iPhone 15 Pro, etc.) iOS 18.x Xcode 16.x Multiple TestFlight testers confirmed same behavior What I've tried: Clearing Safari cookies/data prefersEphemeralWebBrowserSession = true and false Different SameSite cookie policies on server Verified custom URL scheme is registered and works (testing myapp://test in Safari opens the app) Why custom URL scheme instead of Universal Links: We couldn't get Universal Links to trigger from a js redirect (window.location.href) within ASWebAuthenticationSession. Only custom URL schemes seemed to be intercepted. If there's a way to make Universal Links work in this context, without a manual user-interaction we'd be happy to try. iOS Keychain autofill works The only working path is iOS Keychain autofill that requires iphone-authentication and auto-submits the form. Any manual form submission fails, but only on TestFlight - not Xcode builds. Has anyone encountered this or know a workaround?
0
0
319
Dec ’25
Apple Oauth in expo web
Recently I am trying to implement apple oauth in expo web version, I created the service id and other related info, i have issue @PostMapping("/callback") public ResponseEntity handleAppleCallback(@RequestParam Map<String, String> body) { String code = body.get("code"); String idToken = body.get("id_token"); if (code == null) { return ResponseEntity.badRequest().build(); } // Redirect to your Expo Web app with the code in query String frontendUrl = "https://mobile-dot-dev-epicportal.uc.r.appspot.com/apple-callback?code=" + code; return ResponseEntity.status(HttpStatus.FOUND) .header("Location", frontendUrl) .build(); } when i pass the code recived from apple to this route i am getting invalid_grant i am not sure what is wrong here
0
0
152
Nov ’25
Cannot update ASCredentialIdentityStore while device locked
Our product includes a background sync process that synchronizes credentials between devices. We need to update ASCredentialIdentityStore when credentials are changed, we have noticed that the ASCredentialIdentityStore.shared.saveCredentialIdentities() fails to run when the device is locked. Is it possible to update ASCredentialIdentityStore when the device is locked?
0
0
89
Apr ’25
Sign In by Apple on Firebase - 503 Service Temporarily Unavailable
Hello everyone, I'm encountering a persistent 503 Server Temporarily Not Available error when trying to implement "Sign in with Apple" for my web application. I've already performed a full review of my configuration and I'm confident it's set up correctly, which makes this server-side error particularly confusing. Problem Description: Our web application uses Firebase Authentication to handle the "Sign in with Apple" flow. When a user clicks the sign-in button, they are correctly redirected to the appleid.apple.com authorization page. However, instead of seeing the login prompt, the page immediately displays a 503 Server Temporarily Not Available error. This is the redirect URL being generated (with the state parameter truncated for security): https://appleid.apple.com/auth/authorize?response_type=code&client_id=XXXXXX&redirect_uri=https%3A%2F%2FXXXXXX.firebaseapp.com%2F__%2Fauth%2Fhandler&state=AMbdmDk...&scope=email%20name&response_mode=form_post Troubleshooting Steps Performed: Initially, I was receiving an invalid_client error, which prompted me to meticulously verify every part of my setup. I have confirmed the following: App ID Configuration: The "Sign in with Apple" capability is enabled for our primary App ID. Services ID Configuration: We have a Services ID configured specifically for this. The "Sign in with Apple" feature is enabled on this Services ID. The domain is registered and verified under "Domains and Subdomains". Firebase Settings Match Apple Settings: The Services ID from Apple is used as the Client ID in our Firebase configuration. The Team ID is correct. We have generated a private key, and both the Key ID and the .p8 file have been correctly uploaded to Firebase. The key is not revoked in the Apple Developer portal. Since the redirect to Apple is happening with the correct client_id and redirect_uri, and the error is a 5xx server error (not a 4xx client error like invalid_client), I believe our configuration is correct and the issue might be on Apple's end. This has been happening consistently for some time. My Questions: What could be causing a persistent 503 Server Temporarily Not Available error on the /auth/authorize endpoint when all client-side configurations appear to be correct? What is the formal process for opening a technical support ticket (TSI) directly with Apple Developer Support for an issue like this? Thank you for any insights or help you can provide.
0
0
644
Sep ’25
DeviceCheck Framework Crash: DCAnalytics nil Dictionary Insertion in Production
We're experiencing crashes in our production iOS app related to Apple's DeviceCheck framework. The crash occurs in DCAnalytics internal performance tracking, affecting some specific versions of iOS 18 (18.4.1, 18.5.0). Crash Signature CoreFoundation: -[__NSDictionaryM setObject:forKeyedSubscript:] + 460 DeviceCheck: -[DCAnalytics sendPerformanceForCategory:eventType:] + 236 Observed Patterns Scenario 1 - Token Generation: Crashed: com.appQueue EXC_BAD_ACCESS KERN_INVALID_ADDRESS 0x0000000000000010 DeviceCheck: -[DCDevice generateTokenWithCompletionHandler:] Thread: Background dispatch queue Scenario 2 - Support Check: Crashed: com.apple.main-thread EXC_BAD_ACCESS KERN_INVALID_ADDRESS 0x0000000000000008 DeviceCheck: -[DCDevice _isSupportedReturningError:] DeviceCheck: -[DCDevice isSupported] Thread: Main thread Root Cause Analysis The DCAnalytics component within DeviceCheck attempts to insert a nil value into an NSMutableDictionary when recording performance metrics, indicating missing nil validation before dictionary operations. Reproduction Context Crashes occur during standard DeviceCheck API usage: Calling DCDevice.isSupported property Calling DCDevice.generateToken(completionHandler:) (triggered by Firebase App Check SDK) Both operations invoke internal analytics that fail with nil insertion attempts. Concurrency Considerations We've implemented sequential access guards around DeviceCheck token generation to prevent race conditions, yet crashes persist. This suggests the issue likely originates within the DeviceCheck framework's internal implementation rather than concurrent access from our application code. Note: Scenario 2 occurs through Firebase SDK's App Check integration, which internally uses DeviceCheck for attestation. Request Can Apple engineering confirm if this is a known issue with DeviceCheck's analytics subsystem? Is there a recommended workaround to disable DCAnalytics or ensure thread-safe DeviceCheck API usage? Any guidance on preventing these crashes would be appreciated.
0
2
207
Nov ’25
"Sign in with Apple" issue
Hello. I have issue with implementing "Sign in with Apple" on my website. As folow, I have created: App ID identifier: com.livnobus.app (G2F5N5UHYZ) Service ID identifier: com.livnobus.client (B25ZN8P84U) with option enabled "Sign in with Apple" and configuration (Primary App ID and Webiste URLs) Key ID: 43N8XKUW7S with option enabled "Sign in with Apple" and configuration (Primary App ID and Grouped App Ids) When I click "Sign in with Apple" on my website (https://dev.livnobus.com/auth/login), system redirect me to https://appleid.apple.com/ and error show "invalid_client". Redirect URL on my web site is: https://appleid.apple.com/auth/authorize?client_id=com.livnobus.client&redirect_uri=https%3A%2F%2Fdev.livnobus.com%2Fauth%2Fapple%2Fcallback&scope=name%20email&response_type=code&response_mode=form_post&state=eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO&nonce=e7c7a242-1977-47ea-9013-98820c24bfba.eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO There was old Service ID identifier com.livnobus.app-client, for which I lost private KEY, so I have created new one: com.livnobus.client With old Service ID com.livnobus.app-client, https://appleid.apple.com/ shows me Apple form for sign in, but with new Service ID com.livnobus.client there is error "invalid_client" https://appleid.apple.com/auth/authorize?client_id=com.livnobus.app-client&redirect_uri=https%3A%2F%2Fdev.livnobus.com%2Fauth%2Fapple%2Fcallback&scope=name%20email&response_type=code&response_mode=form_post&state=eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO&nonce=e7c7a242-1977-47ea-9013-98820c24bfba.eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO These changes I have made last Friday, and since then I can't use "Sign in with Apple" on my website. Thanks!
0
1
85
Jun ’25
Privacy Resources
General: Forums topic: Privacy & Security Forums tag: Privacy Developer > Security — This also covers privacy topics. App privacy details on the App Store UIKit > Protecting the User’s Privacy documentation Bundle Resources > Privacy manifest files documentation TN3181 Debugging an invalid privacy manifest technote TN3182 Adding privacy tracking keys to your privacy manifest technote TN3183 Adding required reason API entries to your privacy manifest technote TN3184 Adding data collection details to your privacy manifest technote TN3179 Understanding local network privacy technote Handling ITMS-91061: Missing privacy manifest forums post Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com"
0
0
214
Jul ’25
Implementing Script Attachment in a Sandboxed App
Script attachment enables advanced users to create powerful workflows that start in your app. NSUserScriptTask lets you implement script attachment even if your app is sandboxed. This post explains how to set that up. IMPORTANT Most sandboxed apps are sandboxed because they ship on the Mac App Store [1]. While I don’t work for App Review, and thus can’t make definitive statements on their behalf, I want to be clear that NSUserScriptTask is intended to be used to implement script attachment, not as a general-purpose sandbox bypass mechanism. If you have questions or comments, please put them in a new thread. Place it in the Privacy &amp; Security &gt; General subtopic, and tag it with App Sandbox. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" [1] Most but not all. There are good reasons to sandbox your app even if you distribute it directly. See The Case for Sandboxing a Directly Distributed App. Implementing Script Attachment in a Sandboxed App Some apps support script attachment, that is, they allow a user to configure the app to run a script when a particular event occurs. For example: A productivity app might let a user automate repetitive tasks by configuring a toolbar button to run a script. A mail client might let a user add a script that processes incoming mail. When adding script attachment to your app, consider whether your scripting mechanism is internal or external: An internal script is one that only affects the state of the app. A user script is one that operates as the user, that is, it can change the state of other apps or the system as a whole. Supporting user scripts in a sandboxed app is a conundrum. The App Sandbox prevents your app from changing the state of other apps, but that’s exactly what your app needs to do to support user scripts. NSUserScriptTask resolves this conundrum. Use it to run scripts that the user has placed in your app’s Script folder. Because these scripts were specifically installed by the user, their presence indicates user intent and the system runs them outside of your app’s sandbox. Provide easy access to your app’s Script folder Your application’s Scripts folder is hidden within ~/Library. To make it easier for the user to add scripts, add a button or menu item that uses NSWorkspace to show it in the Finder: let scriptsDir = try FileManager.default.url(for: .applicationScriptsDirectory, in: .userDomainMask, appropriateFor: nil, create: true) NSWorkspace.shared.activateFileViewerSelecting([scriptsDir]) Enumerate the available scripts To show a list of scripts to the user, enumerate the Scripts folder: let scriptsDir = try FileManager.default.url(for: .applicationScriptsDirectory, in: .userDomainMask, appropriateFor: nil, create: true) let scriptURLs = try FileManager.default.contentsOfDirectory(at: scriptsDir, includingPropertiesForKeys: [.localizedNameKey]) let scriptNames = try scriptURLs.map { url in return try url.resourceValues(forKeys: [.localizedNameKey]).localizedName! } This uses .localizedNameKey to get the name to display to the user. This takes care of various edge cases, for example, it removes the file name extension if it’s hidden. Run a script To run a script, instantiate an NSUserScriptTask object and call its execute() method: let script = try NSUserScriptTask(url: url) try await script.execute() Run a script with arguments NSUserScriptTask has three subclasses that support additional functionality depending on the type of the script. Use the NSUserUnixTask subsclass to run a Unix script and: Supply command-line arguments. Connect pipes to stdin, stdout, and stderr. Get the termination status. Use the NSUserAppleScriptTask subclass to run an AppleScript, executing either the run handler or a custom Apple event. Use the NSUserAutomatorTask subclass to run an Automator workflow, supplying an optional input. To determine what type of script you have, try casting it to each of the subclasses: let script: NSUserScriptTask = … switch script { case let script as NSUserUnixTask: … use Unix-specific functionality … case let script as NSUserAppleScriptTask: … use AppleScript-specific functionality … case let script as NSUserAutomatorTask: … use Automatic-specific functionality … default: … use generic functionality … }
0
0
981
Aug ’25
Apple Sign in Freeze
I was experiencing a weird sign in error when using apple sign in with my app and wanted to put it here for anyone else who might experience it in the future, and so apple can make this requirement more clear. I was using CloudKit and apple sign in. If you are not using both this probably does not apply to you. Every time I would go to sign in in the iOS simulator I would enter my password, hit "sign in", and everything just froze. The very odd reason for this is if you are using iCloudKit and apple sign in you need to go to specifically the "identifiers" in the "Certificates, Identifiers & Profiles" menu (https://developer.apple.com/account/resources/identifiers/list). And from there you specifically need an App ID Configuration with apple sign in enabled. From there you have to have the same exact bundle identifier in Xcode under project settings(not an upper tab just click your project in the left panel). And that should allow you to both pass validation and have your sign in work. Hope this helps!
0
0
204
Jun ’25
Persistent "invalid_client" error on backend token exchange (Sign In with Apple)
Hello Apple Developer Community and Support, Our team is encountering a critical and persistent issue with our backend integration of Sign In with Apple, and we are hoping for some insights or assistance. Problem: We consistently receive an "invalid_client" error (HTTP 400 status) when our backend service attempts to exchange the authorization code for tokens at Apple's https://appleid.apple.com/auth/token endpoint. The error message from Apple's response is simply {"error":"invalid_client"}. Our Setup: Client Application: An iOS native application. Backend Service: A Go backend responsible for server-to-server token exchange and user management. Sign In with Apple Flow: The iOS app initiates the Sign In with Apple flow, obtains an authorization code, and then passes this code to our backend for token exchange. Extensive Troubleshooting Performed (No Success): We have meticulously followed all official Apple documentation (including TN3107: Resolving Sign In with Apple Response Errors) and industry best practices. Here's a summary of our verification steps, all of which currently show correct configurations and parameters: Backend client_secret JWT Construction: We generate a client_secret JWT as required for server-to-server communication. We've confirmed the claims in the generated JWT are correct: iss (Issuer): Our Team ID (e.g., XXXXXXXXXX). sub (Subject): Our Service ID (e.g., com.example.service.backendauth). aud (Audience): https://appleid.apple.com. kid (Key ID): The Key ID associated with our .p8 private key (e.g., YYYYYYYYYY). We have performed rigorous verification of the .p8 private key content itself, ensuring no corruption, extra characters, or formatting issues in the environment variable. Our backend logs confirm it's parsing the correct PEM content. Token Exchange Request Parameters: The client_id parameter sent in the POST request to /auth/token is correctly set to our App Bundle ID (e.g., com.example.app.ios), as this is the identifier for which the code was originally issued. The redirect_uri parameter sent in the POST request to /auth/token is precisely matched to a registered "Return URL" in our Apple Developer Portal (e.g., https://api.example.com:port/api/auth/callback?provider=apple). Apple Developer Portal Configuration (Meticulously Verified): App ID: Enabled for "Sign In with Apple". Service ID: Enabled for "Sign In with Apple". Its "Primary App ID" is correctly linked to our App Bundle ID (e.g., com.example.app.ios). Its "Return URLs" exactly match our backend's redirect_uri (e.g., https://api.example.com:port/api/auth/callback?provider=apple). Key: Our .p8 key has "Sign In with Apple" enabled. Crucially, in its configuration panel, the "Primary App ID" is correctly linked to our App Bundle ID (e.g., com.example.app.ios). We've ensured this key is specifically created for "Sign In with Apple" and not other services like APNs. We have performed multiple full revocations and meticulous re-creations of the App ID, Service ID, and Key in the Apple Developer Portal, ensuring correct linkages and using new identifiers to bypass any potential caching issues. Network & System Health Checks: Network connectivity from our backend server to https://appleid.apple.com (port 443) has been confirmed as fully functional via ping and curl -v. The incoming TLS handshake from our iOS client app to our backend server's callback URL (https://api.example.com:port/...) is successful and verified via openssl s_client -connect. There are no longer any TLS handshake errors (EOF). Our backend server's system clock is accurately synchronized via NTP. Request for Assistance: Given that all our visible configurations, environment variables, and request parameters appear to be correct and align with Apple's documentation, and network connectivity is confirmed, we are at a loss for why the invalid_client error persists. Based on TN3107, this error typically implies an issue with the client secret's signature or its validity for the given client_id. However, our logs confirm correct iss, sub, aud, and kid, and the private key content. Has anyone encountered this persistent invalid_client error when all checks pass? Are there any less common configurations or troubleshooting steps we might be missing? Could this indicate a caching or propagation delay on Apple's servers, even after waiting periods? Any insights or guidance would be greatly appreciated. We are prepared to provide detailed, anonymized logs and screenshots to Apple Developer Support privately if requested. Thank you.
0
0
218
May ’25
How to distinguish the "no credential found" scenario from ASAuthorizationError
Hello everyone, I'm developing a FIDO2 service using the AuthenticationServices framework. I've run into an issue when a user manually deletes a passkey from their password manager. When this happens, the ASAuthorizationError I get doesn't clearly indicate that the passkey is missing. The error code is 1001, and the localizedDescription is "The operation couldn't be completed. No credentials available for login." The userInfo also contains "NSLocalizedFailureReason": "No credentials available for login." My concern is that these localized strings will change depending on the user's device language, making it unreliable for me to programmatically check for a "no credentials" scenario. Is there a more precise way to determine that the user has no passkey, without relying on localized string values? Thank you for your help.
0
0
389
Sep ’25
Privacy & Security Resources
General: Forums topic: Privacy & Security Privacy Resources Security Resources Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com"
Replies
0
Boosts
0
Views
538
Activity
Jul ’25
apple sign in error
I am asking about the apple Sign in implementation. ▫️ problems eas local build or test flight, I get a “Could not complete registration” message. When I check the console, I see the following error message. akd SRP authentication with server failed! Error: Error Domain=com.apple.AppleIDAuthSupport Code=2 UserInfo={NSDescription=<private>, Status=<private>} ▫️ Assumption ・Developed with Expo ・"expo-apple-authentication":"^7.2.4" ・Two apps are developed at the same time, using supabase, firebase, but both have the same error ・On Xcode, on app ids, apple sign in capability is turned on ・Service ids is set to domain, return url ・keys is created ・Internal test of testfligt is set to deliver
Replies
0
Boosts
0
Views
76
Activity
Jun ’25
Password AutoFill does not pick up saved password in developer mode
Without developer mode, I was able to get Password AutoFill to work in my SwiftUI app with my local Vapor server using ngrok and adding the Associated Domains capability with the value webcredentials:....ngrok-free.app and the respective apple-app-site-association file on my local server in /.well-known/. (works on device, but not in the simulator). However, if I use the developer mode (webcredentials:....ngrok-free.app?mode=developer) it only works halfway when running from Xcode: I get asked to save the password, but the saved passwords are not picked up, when I try to login again. Neither on device, nor in the simulator. If I remove the ?mode=developer it seems to work as expected. Is this by design, or am I missing something? var body: some View { ... Section(header: Text("Email")) { TextField("Email", text: $viewModel.credentials.username) .textContentType(.username) .autocapitalization(.none) .keyboardType(.emailAddress) } Section(header: Text("Passwort")) { SecureField("Passwort", text: $viewModel.credentials.password) .textContentType(.password) } ... }
Replies
0
Boosts
0
Views
237
Activity
May ’25
Group with an existing primary App ID Change
Is it possible to change the Primary App ID set in the Group with an existing primary App ID to another Primary App ID within the same group If there is a change, whether the sub values of the token will be changed upon successful login If an app corresponding to the existing Group Primary App ID is deleted from the app store, ask whether or not other apps in the same group are affected and what effect it will have If anyone knows about the above, please let me know please
Replies
0
Boosts
0
Views
125
Activity
Apr ’25
Update ASCredentialIdentityStore for new Autofill PassKey registration
I have an Autofill Passkey Provider working for Safari and Chrome via WebAuthn protocol. Unfortunately, Chrome will not offer my extension as a logon credential provider unless I add the credential to the ASCredentialIdentityStore. I wonder what is the best way to access the ASCredentialIdentityStore from an AutoFill extension? I understand I cannot access it directly from the extension context, so what is the best way to trigger my container app to run, based on a new WebAuthn registration? The best I can think of so far is for the www site to provide an App Link to launch my container app as part of the registration ceremony. Safari will offer my extension even without adding it to the ASCredentialIdentityStore, so I guess I should file a request with Chrome to work this way too, given difficulty of syncing ASCredentialIdentityStore with WebAuthn registration.
Replies
0
Boosts
0
Views
88
Activity
Oct ’25
Sign-in with Apple: user's name and email only retrieved first time
I have implemented "Sign in With Apple" in my app , but problem is when user logged in initially or first time and email I can retrieve , name and email but after that when i tried to re login it is giving null value for name and email, why it is happening and what should be done here?
Replies
0
Boosts
0
Views
93
Activity
Apr ’25
Crash Detection / Emergency SOS: desafios reais de segurança pessoal em escala
Estou compartilhando algumas observações técnicas sobre Crash Detection / Emergency SOS no ecossistema Apple, com base em eventos amplamente observados em 2022 e 2024, quando houve chamadas automáticas em massa para serviços de emergência. A ideia aqui não é discutir UX superficial ou “edge cases isolados”, mas sim comportamento sistêmico em escala, algo que acredito ser relevante para qualquer time que trabalhe com sistemas críticos orientados a eventos físicos. Contexto resumido A partir do iPhone 14, a Detecção de Acidente passou a correlacionar múltiplos sensores (acelerômetros de alta faixa, giroscópio, GPS, microfones) para inferir eventos de impacto severo e acionar automaticamente chamadas de emergência. Em 2022, isso resultou em um volume significativo de falsos positivos, especialmente em atividades com alta aceleração (esqui, snowboard, parques de diversão). Em 2024, apesar de ajustes, houve recorrência localizada do mesmo padrão. Ponto técnico central O problema não parece ser hardware, nem um “bug pontual”, mas sim o estado intermediário de decisão: Aceleração ≠ acidente Ruído ≠ impacto real Movimento extremo ≠ incapacidade humana Quando o classificador entra em estado ambíguo, o sistema depende de uma janela curta de confirmação humana (toque/voz). Em ambientes ruidosos, com o usuário em movimento ou fisicamente ativo, essa confirmação frequentemente falha. O sistema então assume incapacidade e executa a ação fail-safe: chamada automática. Do ponto de vista de engenharia de segurança, isso é compreensível. Do ponto de vista de escala, é explosivo. Papel da Siri A Siri não “decide” o acidente, mas é um elo sensível na cadeia humano–máquina. Falhas de compreensão por ruído, idioma, respiração ofegante ou ausência de resposta acabam sendo interpretadas como sinal de emergência real. Isso é funcionalmente equivalente ao que vemos em sistemas automotivos como o eCall europeu, quando a confirmação humana é inexistente ou degradada. O dilema estrutural Há um trade-off claro e inevitável: Reduzir falsos negativos (não perder um acidente real) Aumentar falsos positivos (chamadas indevidas) Para o usuário individual, errar “para mais” faz sentido. Para serviços públicos de emergência, milhões de dispositivos errando “para mais” criam ruído operacional real. Por que isso importa para developers A Apple hoje opera, na prática, um dos maiores sistemas privados de segurança pessoal automatizada do mundo, interagindo diretamente com infraestrutura pública crítica. Isso coloca Crash Detection / SOS na mesma categoria de sistemas safety-critical, onde: UX é parte da segurança Algoritmos precisam ser auditáveis “Human-in-the-loop” não pode ser apenas nominal Reflexões abertas Alguns pontos que, como developer, acho que merecem discussão: Janelas de confirmação humana adaptativas ao contexto (atividade física, ruído). Cancelamento visual mais agressivo em cenários de alto movimento. Perfis de sensibilidade por tipo de atividade, claramente comunicados. Critérios adicionais antes da chamada automática quando o risco de falso positivo é estatisticamente alto. Não é um problema simples, nem exclusivo da Apple. É um problema de software crítico em contato direto com o mundo físico, operando em escala planetária. Justamente por isso, acho que vale uma discussão técnica aberta, sem ruído emocional. Curioso para ouvir perspectivas de quem trabalha com sistemas similares (automotivo, wearables, safety-critical, ML embarcado). — Rafa
Replies
0
Boosts
0
Views
196
Activity
Jan ’26
App Sandbox Resources
General: Forums subtopic: Privacy & Security > General Forums tag: App Sandbox App Sandbox documentation App Sandbox Design Guide documentation — This is no longer available from Apple. There’s still some info in there that isn’t covered by the current docs but, with the latest updates, it’s pretty minimal (r. 110052019). Still, if you’re curious, you can consult an old copy [1]. App Sandbox Temporary Exception Entitlements archived documentation — To better understand the role of temporary exception entitlements, see this post. Embedding a command-line tool in a sandboxed app documentation Discovering and diagnosing App Sandbox violations (replaces the Viewing Sandbox Violation Reports forums post) Resolving App Sandbox Inheritance Problems forums post The Case for Sandboxing a Directly Distributed App forums post Implementing Script Attachment in a Sandboxed App forums post Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" [1] For example, this one archived by the Wayback Machine.
Replies
0
Boosts
0
Views
2.9k
Activity
Jul ’25
App Attest API – "DCErrorInvalidKey 3" after App or OS Update
Hi everyone, We are using the App Attest API to securely transition users to our new system. As part of this, we store the Key ID of the attestation key for each user to verify their identity later. However, we’ve noticed that some users are encountering the error “DCErrorInvalidKey 3” when calling generateAssertion. Importantly, the key was previously successfully attested, and generateAssertion has worked before for these users. Our questions: Could this error be caused by an app or iOS update? Is it problematic to link an attestation key's Key ID directly to a user, or are there scenarios where the key might change or become invalid? If there’s a way to mitigate this issue or recover affected users, what best practices would you recommend? Any help or shared experiences would be greatly appreciated! Thanks in advance.
Replies
0
Boosts
4
Views
290
Activity
Apr ’25
ASWebAuthenticationSession: Form submit fails on TestFlight unless submitted through Keychain autofill
I'm experiencing a strange issue where ASWebAuthenticationSession works perfectly when running from Xcode (both Debug and Release), but fails on TestFlight builds. The setup: iOS app using ASWebAuthenticationSession for OIDC login (Keycloak) Custom URL scheme callback (myapp://) prefersEphemeralWebBrowserSession = false The issue: When using iOS Keychain autofill (with Face ID/Touch ID or normal iphone pw, that auto-submits the form) -> works perfectly When manually typing credentials and clicking the login button -> fails with white screen When it fails, the form POST from Keycloak back to my server (/signin-oidc) never reaches the server at all. The authentication session just shows a white screen. Reproduced on: Multiple devices (iPhone 15 Pro, etc.) iOS 18.x Xcode 16.x Multiple TestFlight testers confirmed same behavior What I've tried: Clearing Safari cookies/data prefersEphemeralWebBrowserSession = true and false Different SameSite cookie policies on server Verified custom URL scheme is registered and works (testing myapp://test in Safari opens the app) Why custom URL scheme instead of Universal Links: We couldn't get Universal Links to trigger from a js redirect (window.location.href) within ASWebAuthenticationSession. Only custom URL schemes seemed to be intercepted. If there's a way to make Universal Links work in this context, without a manual user-interaction we'd be happy to try. iOS Keychain autofill works The only working path is iOS Keychain autofill that requires iphone-authentication and auto-submits the form. Any manual form submission fails, but only on TestFlight - not Xcode builds. Has anyone encountered this or know a workaround?
Replies
0
Boosts
0
Views
319
Activity
Dec ’25
Apple Oauth in expo web
Recently I am trying to implement apple oauth in expo web version, I created the service id and other related info, i have issue @PostMapping("/callback") public ResponseEntity handleAppleCallback(@RequestParam Map<String, String> body) { String code = body.get("code"); String idToken = body.get("id_token"); if (code == null) { return ResponseEntity.badRequest().build(); } // Redirect to your Expo Web app with the code in query String frontendUrl = "https://mobile-dot-dev-epicportal.uc.r.appspot.com/apple-callback?code=" + code; return ResponseEntity.status(HttpStatus.FOUND) .header("Location", frontendUrl) .build(); } when i pass the code recived from apple to this route i am getting invalid_grant i am not sure what is wrong here
Replies
0
Boosts
0
Views
152
Activity
Nov ’25
Cannot update ASCredentialIdentityStore while device locked
Our product includes a background sync process that synchronizes credentials between devices. We need to update ASCredentialIdentityStore when credentials are changed, we have noticed that the ASCredentialIdentityStore.shared.saveCredentialIdentities() fails to run when the device is locked. Is it possible to update ASCredentialIdentityStore when the device is locked?
Replies
0
Boosts
0
Views
89
Activity
Apr ’25
Sign In by Apple on Firebase - 503 Service Temporarily Unavailable
Hello everyone, I'm encountering a persistent 503 Server Temporarily Not Available error when trying to implement "Sign in with Apple" for my web application. I've already performed a full review of my configuration and I'm confident it's set up correctly, which makes this server-side error particularly confusing. Problem Description: Our web application uses Firebase Authentication to handle the "Sign in with Apple" flow. When a user clicks the sign-in button, they are correctly redirected to the appleid.apple.com authorization page. However, instead of seeing the login prompt, the page immediately displays a 503 Server Temporarily Not Available error. This is the redirect URL being generated (with the state parameter truncated for security): https://appleid.apple.com/auth/authorize?response_type=code&client_id=XXXXXX&redirect_uri=https%3A%2F%2FXXXXXX.firebaseapp.com%2F__%2Fauth%2Fhandler&state=AMbdmDk...&scope=email%20name&response_mode=form_post Troubleshooting Steps Performed: Initially, I was receiving an invalid_client error, which prompted me to meticulously verify every part of my setup. I have confirmed the following: App ID Configuration: The "Sign in with Apple" capability is enabled for our primary App ID. Services ID Configuration: We have a Services ID configured specifically for this. The "Sign in with Apple" feature is enabled on this Services ID. The domain is registered and verified under "Domains and Subdomains". Firebase Settings Match Apple Settings: The Services ID from Apple is used as the Client ID in our Firebase configuration. The Team ID is correct. We have generated a private key, and both the Key ID and the .p8 file have been correctly uploaded to Firebase. The key is not revoked in the Apple Developer portal. Since the redirect to Apple is happening with the correct client_id and redirect_uri, and the error is a 5xx server error (not a 4xx client error like invalid_client), I believe our configuration is correct and the issue might be on Apple's end. This has been happening consistently for some time. My Questions: What could be causing a persistent 503 Server Temporarily Not Available error on the /auth/authorize endpoint when all client-side configurations appear to be correct? What is the formal process for opening a technical support ticket (TSI) directly with Apple Developer Support for an issue like this? Thank you for any insights or help you can provide.
Replies
0
Boosts
0
Views
644
Activity
Sep ’25
DeviceCheck Framework Crash: DCAnalytics nil Dictionary Insertion in Production
We're experiencing crashes in our production iOS app related to Apple's DeviceCheck framework. The crash occurs in DCAnalytics internal performance tracking, affecting some specific versions of iOS 18 (18.4.1, 18.5.0). Crash Signature CoreFoundation: -[__NSDictionaryM setObject:forKeyedSubscript:] + 460 DeviceCheck: -[DCAnalytics sendPerformanceForCategory:eventType:] + 236 Observed Patterns Scenario 1 - Token Generation: Crashed: com.appQueue EXC_BAD_ACCESS KERN_INVALID_ADDRESS 0x0000000000000010 DeviceCheck: -[DCDevice generateTokenWithCompletionHandler:] Thread: Background dispatch queue Scenario 2 - Support Check: Crashed: com.apple.main-thread EXC_BAD_ACCESS KERN_INVALID_ADDRESS 0x0000000000000008 DeviceCheck: -[DCDevice _isSupportedReturningError:] DeviceCheck: -[DCDevice isSupported] Thread: Main thread Root Cause Analysis The DCAnalytics component within DeviceCheck attempts to insert a nil value into an NSMutableDictionary when recording performance metrics, indicating missing nil validation before dictionary operations. Reproduction Context Crashes occur during standard DeviceCheck API usage: Calling DCDevice.isSupported property Calling DCDevice.generateToken(completionHandler:) (triggered by Firebase App Check SDK) Both operations invoke internal analytics that fail with nil insertion attempts. Concurrency Considerations We've implemented sequential access guards around DeviceCheck token generation to prevent race conditions, yet crashes persist. This suggests the issue likely originates within the DeviceCheck framework's internal implementation rather than concurrent access from our application code. Note: Scenario 2 occurs through Firebase SDK's App Check integration, which internally uses DeviceCheck for attestation. Request Can Apple engineering confirm if this is a known issue with DeviceCheck's analytics subsystem? Is there a recommended workaround to disable DCAnalytics or ensure thread-safe DeviceCheck API usage? Any guidance on preventing these crashes would be appreciated.
Replies
0
Boosts
2
Views
207
Activity
Nov ’25
"Sign in with Apple" issue
Hello. I have issue with implementing "Sign in with Apple" on my website. As folow, I have created: App ID identifier: com.livnobus.app (G2F5N5UHYZ) Service ID identifier: com.livnobus.client (B25ZN8P84U) with option enabled "Sign in with Apple" and configuration (Primary App ID and Webiste URLs) Key ID: 43N8XKUW7S with option enabled "Sign in with Apple" and configuration (Primary App ID and Grouped App Ids) When I click "Sign in with Apple" on my website (https://dev.livnobus.com/auth/login), system redirect me to https://appleid.apple.com/ and error show "invalid_client". Redirect URL on my web site is: https://appleid.apple.com/auth/authorize?client_id=com.livnobus.client&redirect_uri=https%3A%2F%2Fdev.livnobus.com%2Fauth%2Fapple%2Fcallback&scope=name%20email&response_type=code&response_mode=form_post&state=eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO&nonce=e7c7a242-1977-47ea-9013-98820c24bfba.eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO There was old Service ID identifier com.livnobus.app-client, for which I lost private KEY, so I have created new one: com.livnobus.client With old Service ID com.livnobus.app-client, https://appleid.apple.com/ shows me Apple form for sign in, but with new Service ID com.livnobus.client there is error "invalid_client" https://appleid.apple.com/auth/authorize?client_id=com.livnobus.app-client&redirect_uri=https%3A%2F%2Fdev.livnobus.com%2Fauth%2Fapple%2Fcallback&scope=name%20email&response_type=code&response_mode=form_post&state=eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO&nonce=e7c7a242-1977-47ea-9013-98820c24bfba.eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO These changes I have made last Friday, and since then I can't use "Sign in with Apple" on my website. Thanks!
Replies
0
Boosts
1
Views
85
Activity
Jun ’25
Privacy Resources
General: Forums topic: Privacy & Security Forums tag: Privacy Developer > Security — This also covers privacy topics. App privacy details on the App Store UIKit > Protecting the User’s Privacy documentation Bundle Resources > Privacy manifest files documentation TN3181 Debugging an invalid privacy manifest technote TN3182 Adding privacy tracking keys to your privacy manifest technote TN3183 Adding required reason API entries to your privacy manifest technote TN3184 Adding data collection details to your privacy manifest technote TN3179 Understanding local network privacy technote Handling ITMS-91061: Missing privacy manifest forums post Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com"
Replies
0
Boosts
0
Views
214
Activity
Jul ’25
Implementing Script Attachment in a Sandboxed App
Script attachment enables advanced users to create powerful workflows that start in your app. NSUserScriptTask lets you implement script attachment even if your app is sandboxed. This post explains how to set that up. IMPORTANT Most sandboxed apps are sandboxed because they ship on the Mac App Store [1]. While I don’t work for App Review, and thus can’t make definitive statements on their behalf, I want to be clear that NSUserScriptTask is intended to be used to implement script attachment, not as a general-purpose sandbox bypass mechanism. If you have questions or comments, please put them in a new thread. Place it in the Privacy &amp; Security &gt; General subtopic, and tag it with App Sandbox. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" [1] Most but not all. There are good reasons to sandbox your app even if you distribute it directly. See The Case for Sandboxing a Directly Distributed App. Implementing Script Attachment in a Sandboxed App Some apps support script attachment, that is, they allow a user to configure the app to run a script when a particular event occurs. For example: A productivity app might let a user automate repetitive tasks by configuring a toolbar button to run a script. A mail client might let a user add a script that processes incoming mail. When adding script attachment to your app, consider whether your scripting mechanism is internal or external: An internal script is one that only affects the state of the app. A user script is one that operates as the user, that is, it can change the state of other apps or the system as a whole. Supporting user scripts in a sandboxed app is a conundrum. The App Sandbox prevents your app from changing the state of other apps, but that’s exactly what your app needs to do to support user scripts. NSUserScriptTask resolves this conundrum. Use it to run scripts that the user has placed in your app’s Script folder. Because these scripts were specifically installed by the user, their presence indicates user intent and the system runs them outside of your app’s sandbox. Provide easy access to your app’s Script folder Your application’s Scripts folder is hidden within ~/Library. To make it easier for the user to add scripts, add a button or menu item that uses NSWorkspace to show it in the Finder: let scriptsDir = try FileManager.default.url(for: .applicationScriptsDirectory, in: .userDomainMask, appropriateFor: nil, create: true) NSWorkspace.shared.activateFileViewerSelecting([scriptsDir]) Enumerate the available scripts To show a list of scripts to the user, enumerate the Scripts folder: let scriptsDir = try FileManager.default.url(for: .applicationScriptsDirectory, in: .userDomainMask, appropriateFor: nil, create: true) let scriptURLs = try FileManager.default.contentsOfDirectory(at: scriptsDir, includingPropertiesForKeys: [.localizedNameKey]) let scriptNames = try scriptURLs.map { url in return try url.resourceValues(forKeys: [.localizedNameKey]).localizedName! } This uses .localizedNameKey to get the name to display to the user. This takes care of various edge cases, for example, it removes the file name extension if it’s hidden. Run a script To run a script, instantiate an NSUserScriptTask object and call its execute() method: let script = try NSUserScriptTask(url: url) try await script.execute() Run a script with arguments NSUserScriptTask has three subclasses that support additional functionality depending on the type of the script. Use the NSUserUnixTask subsclass to run a Unix script and: Supply command-line arguments. Connect pipes to stdin, stdout, and stderr. Get the termination status. Use the NSUserAppleScriptTask subclass to run an AppleScript, executing either the run handler or a custom Apple event. Use the NSUserAutomatorTask subclass to run an Automator workflow, supplying an optional input. To determine what type of script you have, try casting it to each of the subclasses: let script: NSUserScriptTask = … switch script { case let script as NSUserUnixTask: … use Unix-specific functionality … case let script as NSUserAppleScriptTask: … use AppleScript-specific functionality … case let script as NSUserAutomatorTask: … use Automatic-specific functionality … default: … use generic functionality … }
Replies
0
Boosts
0
Views
981
Activity
Aug ’25
Apple Sign in Freeze
I was experiencing a weird sign in error when using apple sign in with my app and wanted to put it here for anyone else who might experience it in the future, and so apple can make this requirement more clear. I was using CloudKit and apple sign in. If you are not using both this probably does not apply to you. Every time I would go to sign in in the iOS simulator I would enter my password, hit "sign in", and everything just froze. The very odd reason for this is if you are using iCloudKit and apple sign in you need to go to specifically the "identifiers" in the "Certificates, Identifiers & Profiles" menu (https://developer.apple.com/account/resources/identifiers/list). And from there you specifically need an App ID Configuration with apple sign in enabled. From there you have to have the same exact bundle identifier in Xcode under project settings(not an upper tab just click your project in the left panel). And that should allow you to both pass validation and have your sign in work. Hope this helps!
Replies
0
Boosts
0
Views
204
Activity
Jun ’25
Persistent "invalid_client" error on backend token exchange (Sign In with Apple)
Hello Apple Developer Community and Support, Our team is encountering a critical and persistent issue with our backend integration of Sign In with Apple, and we are hoping for some insights or assistance. Problem: We consistently receive an "invalid_client" error (HTTP 400 status) when our backend service attempts to exchange the authorization code for tokens at Apple's https://appleid.apple.com/auth/token endpoint. The error message from Apple's response is simply {"error":"invalid_client"}. Our Setup: Client Application: An iOS native application. Backend Service: A Go backend responsible for server-to-server token exchange and user management. Sign In with Apple Flow: The iOS app initiates the Sign In with Apple flow, obtains an authorization code, and then passes this code to our backend for token exchange. Extensive Troubleshooting Performed (No Success): We have meticulously followed all official Apple documentation (including TN3107: Resolving Sign In with Apple Response Errors) and industry best practices. Here's a summary of our verification steps, all of which currently show correct configurations and parameters: Backend client_secret JWT Construction: We generate a client_secret JWT as required for server-to-server communication. We've confirmed the claims in the generated JWT are correct: iss (Issuer): Our Team ID (e.g., XXXXXXXXXX). sub (Subject): Our Service ID (e.g., com.example.service.backendauth). aud (Audience): https://appleid.apple.com. kid (Key ID): The Key ID associated with our .p8 private key (e.g., YYYYYYYYYY). We have performed rigorous verification of the .p8 private key content itself, ensuring no corruption, extra characters, or formatting issues in the environment variable. Our backend logs confirm it's parsing the correct PEM content. Token Exchange Request Parameters: The client_id parameter sent in the POST request to /auth/token is correctly set to our App Bundle ID (e.g., com.example.app.ios), as this is the identifier for which the code was originally issued. The redirect_uri parameter sent in the POST request to /auth/token is precisely matched to a registered "Return URL" in our Apple Developer Portal (e.g., https://api.example.com:port/api/auth/callback?provider=apple). Apple Developer Portal Configuration (Meticulously Verified): App ID: Enabled for "Sign In with Apple". Service ID: Enabled for "Sign In with Apple". Its "Primary App ID" is correctly linked to our App Bundle ID (e.g., com.example.app.ios). Its "Return URLs" exactly match our backend's redirect_uri (e.g., https://api.example.com:port/api/auth/callback?provider=apple). Key: Our .p8 key has "Sign In with Apple" enabled. Crucially, in its configuration panel, the "Primary App ID" is correctly linked to our App Bundle ID (e.g., com.example.app.ios). We've ensured this key is specifically created for "Sign In with Apple" and not other services like APNs. We have performed multiple full revocations and meticulous re-creations of the App ID, Service ID, and Key in the Apple Developer Portal, ensuring correct linkages and using new identifiers to bypass any potential caching issues. Network & System Health Checks: Network connectivity from our backend server to https://appleid.apple.com (port 443) has been confirmed as fully functional via ping and curl -v. The incoming TLS handshake from our iOS client app to our backend server's callback URL (https://api.example.com:port/...) is successful and verified via openssl s_client -connect. There are no longer any TLS handshake errors (EOF). Our backend server's system clock is accurately synchronized via NTP. Request for Assistance: Given that all our visible configurations, environment variables, and request parameters appear to be correct and align with Apple's documentation, and network connectivity is confirmed, we are at a loss for why the invalid_client error persists. Based on TN3107, this error typically implies an issue with the client secret's signature or its validity for the given client_id. However, our logs confirm correct iss, sub, aud, and kid, and the private key content. Has anyone encountered this persistent invalid_client error when all checks pass? Are there any less common configurations or troubleshooting steps we might be missing? Could this indicate a caching or propagation delay on Apple's servers, even after waiting periods? Any insights or guidance would be greatly appreciated. We are prepared to provide detailed, anonymized logs and screenshots to Apple Developer Support privately if requested. Thank you.
Replies
0
Boosts
0
Views
218
Activity
May ’25
account.apple.com not showing in-app sign-in modal
Hi, preivously on appleid.apple.com, navigating to this page on safari would show the in-app modal to continue with Apple. Now with account.apple.com, this is not the case. We are not seeing the in-app modal to continue with Apple
Replies
0
Boosts
0
Views
156
Activity
Jun ’25
How to distinguish the "no credential found" scenario from ASAuthorizationError
Hello everyone, I'm developing a FIDO2 service using the AuthenticationServices framework. I've run into an issue when a user manually deletes a passkey from their password manager. When this happens, the ASAuthorizationError I get doesn't clearly indicate that the passkey is missing. The error code is 1001, and the localizedDescription is "The operation couldn't be completed. No credentials available for login." The userInfo also contains "NSLocalizedFailureReason": "No credentials available for login." My concern is that these localized strings will change depending on the user's device language, making it unreliable for me to programmatically check for a "no credentials" scenario. Is there a more precise way to determine that the user has no passkey, without relying on localized string values? Thank you for your help.
Replies
0
Boosts
0
Views
389
Activity
Sep ’25