What is the reason the hand-tracking joints have these axes? I'm trying to create a virtual hands model and that's a mess.

Problem Description: I am developing an application that runs in the Shared Space on Apple Vision Pro using Unity. When using the UI ScrollView (Scroll View) component, I found that the Mask / RectMask2D does not function in the Shared Space. Scrolling content is not masked or cropped; it extends beyond the view boundary and is displayed directly. The same UI works correctly across platforms such as Unity Editor, iOS, and macOS, but the issue only occurs in the shared space of Vision Pro. Reproduction steps: Create a ScrollView in Unity. Add a Mask or RectMask2D to the viewport. Deploy the application to Apple Vision Pro and run it in Shared Space mode. Sliding content will not be clipped by the mask, and the masked area is entirely ineffective. Expected behavior: The content of ScrollView should be properly clipped by Mask / RectMask2D and should not render outside the mask boundary. Actual results: In the shared space of Vision Pro, the mask is ineffective, causing scrolling content to extend beyond the designated area and resulting in severe UI distortion. Environmental Information: Device: Apple Vision Pro Mode: Shared Space Unity Version: 6000.0.40f1 visionOS version: visionOS 26.0 Unity PolySpatial Version: 2.0.4 Impact This issue causes Unity UI to fail to display correctly on Vision Pro, preventing ScrollView from properly clipping content, which impacts the UI experience and interaction effects in practical applications. Expected Result: When running a Unity app in the shared space of visionOS, the Mask / RectMask2D of ScrollView functions correctly

Hi there, I received an enterprise license file to include enhanced object tracking configuration for the Vision Pro. My account is part of the team which got the allowance from Apple to use this capability. Unfortunately, although I followed the guide, I do not find the Object Tracking capability when I try to add it to my project. There are other capabilities like Main Camera on the Vision Pro, but not for Object Tracking. I am using Xcode 26.1 and visionOS 26.1. What am I missing here? Thanks in advance, Matthias

i'd like to have a little bit control over the transparency of the videomaterial. is there any way to prepare a shadergraph unlit shader and use it with the videomaterial.

Since updating to iOS 26.0 (and confirmed on 26.1), ARBodyTrackingConfiguration no longer detects a valid ARBodyAnchor on devices with LiDAR (e.g., iPhone 15 Pro, iPhone 17 Pro Max). This issue reproduces in custom projects and Apple’s official sample “Capturing Body Motion in 3D”. The AR session runs normally, but the delegate call: func session(_ session: ARSession, didUpdate anchors: [ARAnchor]) never yields an ARBodyAnchor with valid joint transforms. All joints return nil when calling: body.skeleton.modelTransform(for: jointName) resulting in 0 valid joints per frame. Environment • Device: iPhone 17 Pro Max (LiDAR) • iOS: 26.0 / 26.1 • Xcode: 16.0 (stable) • Framework: ARKit + RealityKit • Configuration used: config.worldAlignment = .gravityAndHeading config.isAutoFocusEnabled = true config.environmentTexturing = .none session.run(config) Also tested: with and without frameSemantics = .bodyDetection Expected Behavior ARBodyAnchor should be detected and body.skeleton should contain ~89 valid joints with continuous updates.

I am using AccessoryTrackingProvider from ARKit to get the transform of the PSVR2 controller via originFromAnchorTransform of the AccessoryAnchor. I also am trying to use AnchorEntity on the controller using RealityKit However, none of the three options for Accessory.LocationName, which should be used to define the AnchorEntity target, seem to match the position on the controller which is being sent from ARKit. The picture attached is showing two transforms: RealityKit - using .gripSurface to define the AnchoringComponent.Target.accesssory location. ARKit - using originFromAnchorTransform for AccessoryTrackingProvider. They are not aligned at the same point. As for the other options of Accessory.LocationName, using .aim is located at the tip of the controller and .grip is the same position as .gripSurface but with a different orientation. I am wondering why there is not an option for Accessory.LocationName that actually matches the transform captured by ARKit?

Error: RoomCaptureSession.CaptureError.exceedSceneSizeLimit Apple Documentation Explanation: An error that indicates when the scene size grows past the framework’s limitations. Issue: This error is popping up in my iPhone 14 Pro (128 GB) after a few roomplan scans are done. This error shows up even if the room size is small. It occurs immediately after I start the RoomCaptureSession after the relocalisation of previous AR session (in world tracking configuration). I am having trouble understanding exactly why this error shows and how to debug/solve it. Does anyone have any idea on how to approach to this issue?