I have two Macbook Pros: 14" M4 Pro (company) 16" M4 Max (personal) I work remote full-time and recently purchased 2 of the new Studio Display XDRs. Everything works perfectly however I chose to connect them to the M4 Max. I have a caldigit Element TB5 hub and can daisy chain both monitors through that perfectly. With that said, no matter how I plug them into the M4 Pro I can only ever get one to light up at a time. What I have tried to resolve it: Plug them in individually to the m4 pro Plug them in one at a time, force them to 60hz and then plug them both in. Daisy Chaining the displays Daisy Chaining the displays through the TB5 Hub Nothing works. Only one display comes on and its whichever is plugged in first. I have even tried lowering the refresh to as low as it goes on both manually then plugging them back in. Still nothing. From what I am reading it appears to be that the M4 Pro has 3 display lanes and when I plug the first studio display XDR it is using 2 lanes. If I go down to 60hz which is what the original studio display was, then it should theoretically go down to 1 display lane allowing a second to be plugged in. A bunch of people had the older studio display running 2x 5k ASD monitors on the M4 Pro. Now with the latest Studio Display XDR I am stuck. I was researching possibly editing the EDID of each to mimic the older studio display, but I don't know how to do that easily without BetterDisplay and right now I have no ability to install that. There is a chance I can get approval to run commands / BetterDisplay to get this working if a solution can be found. What I think the ultimate fix is for the firmware / macOS to realize the limitation, force the studio display XDR to 60hz when a second monitor is plugged in and they both would work. A single Studio Display XDR could run 120hz, but immediately upon plugging a second one it swaps to 60hz. I am completely fine with that scenario. I have found a few discussions about this topic with the main one being on apple discussions: https://discussions.apple.com/thread/256262701?sortBy=rank&answerId=261888577022 Someone sort of gave me this idea on Mac because they were trying to use the studio display XDR on windows and it appears to have worked with cloning an older ASD EDID on the new model: https://www.reddit.com/r/mac/comments/1s3ani5/got_studio_display_xdr_working_on_windows_pc_5k/ I don't really know what else to do. I opened a ticket with support. Case # 102853480566, but it went no where. I got disconnected during the first call after describing everything and when they reached back out they didn't even give me 2 seconds to pick up and they hung up and closed the ticket. I really don't want to return the displays because they are beautiful and work beautifully on the m4 max. They should work with 60hz on the m4 pro. Who / How / When can we get this resolved? I would be happy to work with an Apple dev / engineer to help resolve this.

I'm in the process of writing a DriverKit USBHostInterface driver, and while I'm finally starting to get there, I've run into a bit of a frustration with logging. Naturally I have a liberal amount of os_log calls that I'm using to troubleshoot my driver. However I've noticed that they don't show up until after the first time my driver has loaded. Meaning, for example, suppose I make a new build of my driver and it's bundled user-mode app, install the bundle to /Applications, run the installer, verify it took with systemextensionsctl list, fire up Console and start streaming log entries, then plug in my device. I can see the log entries that show that my driver is loaded, etc., then a bunch of kernel -> log entries, but none of my Start method log entries. If I unplug my device and plug it in again, my log entries show up as expected. Why is this and, more importantly, how can I fix it? I'd like to see those log entries the first time the driver loads, if I could.

Trying to use IOLog to print out a message from a dext. When I try to use IOLog, I get , though I did not or thought I did not tag it as private. I have tried to update the info.plist file for the dext according to https://developer.apple.com/forums/thread/705810, but that has not helped, or perhaps I am not defining it correctly since it's a dext. Anyone else had this issue, and how did you fix it?

Hi Everyone, We are currently migrating a mature legacy KEXT to DriverKit for our PCIe SCSI storage controller (connected via Thunderbolt 3). During the DEXT load sequence, we have observed that the system automatically triggers a power state transition from State 0 (Off) to State 2 (On). However, this process results in a Kernel Panic due to a timeout after approximately 21 seconds. We have verified that our implementation of Start_Impl, UserInitializeController_Impl, and SetPowerState_Impl executes extremely fast, with a total execution time of less than one second. Specifically, SetPowerState_Impl returns kIOReturnSuccess immediately upon being called. Furthermore, our current Info.plist does not contain any IOPowerManagement dictionary or related keys. Despite the fast execution and the absence of explicit power management declarations in the plist, the kernel power management state machine (IOServicePM) still generates a 21-second timeout, leading to the following panic: Panic Log: panic(cpu 7 caller 0xfffffe0020be8fec): MySCSIDriver::setPowerState(0xfffffe2fb1a65c00 : 0xfffffe0020bfed88, 0 -> 2) timed out after 21257 ms @IOServicePM.cpp:5609 com.example.driver.dext: ( id: com.example.driver.dext; path: /Library/SystemExtensions/[UUID]/com.example.driver.dext; state: loaded ) Note on Previous Discussion: I would like to express my gratitude to Kevin from Apple DTS for the helpful discussion regarding the implementation of BundleParallelTask on the forums. Since then, we have shifted our development focus toward completing the overall management ecosystem, delivering a comprehensive operational interface for users, and handling specific user environments and behaviors. Our current priority is ensuring system stability—specifically resolving these Thunderbolt-related power management issues (sleep/wake)—to prepare the product for upcoming testing. I remain very grateful for the guidance provided on batch task optimization and intend to resume those optimizations once this critical stability baseline is secured. Technical Guidance Needed for PM Migration In our legacy KEXT, we utilized PMinit(), registerPowerDriver(), and joinPMtree() to precisely control the timing of power management registration. In transitioning to the DriverKit SDK, we have not found clear guidance on several key points: Standardized Migration Path: What is the recommended way to implement equivalent power management initialization (formerly PMinit) within a DriverKit subclass? In DriverKit, how should we replicate the behavior of manually calling registerPowerDriver and joinPMtree to ensure the driver is only monitored once the hardware is ready? Implicit Power Registration: Why does the system enforce a setPowerState(0 -> 2) transition on a subclass of IOUserSCSIParallelInterfaceController even when no IOPowerManagement dictionary is defined in the Info.plist? Is this a default behavior of the SCSI or PCI transport framework? Thunderbolt Specifics: Are there specific power proxying requirements or configurations for PCIe devices over Thunderbolt to avoid conflicts with the default IOPCIFamily power policies? Best Regards, Charles

I have a custom hardware board that I want to communicate serially with from an iPad. Should I use the DriverKit route or the MFi route?

I have a custom hardware board that I want to communicate serially with from an iPad. Should I use the DriverKit route or the MFi route?

While I welcome the arrival of a userspace implementation of drivers, DriverKit as it stands has some notable flaws. My main concern is the ability of open-source projects like HoRNDIS being able to access paid developer accounts and the limited entitlement scope (plus the waiting period) for what is essentially a hobbyist free project. Even if the developer is a professional company, some legacy hardware will go unsupported because of a lack of support from the vendor. Providing a way for users who need access to older hardware would be needed. Three concrete requests: A class-level or wildcard VID/PID entitlement for open source projects with a verifiable public repository A free or reduced-cost entitlement path for non-commercial volunteer-maintained drivers Published approval criteria and timelines so projects can plan accordingly Depreciating kexts without providing an accessible successor for community projects isn't security, it is gatekeeping access to hardware that is critically needed. Is this use case on the roadmap at all? Developers deserve a clear answer.

When printing image/photo files via AirPrint, selected finishing options (e.g., Punch) are not applied unless a preset is chosen. reproduction steps: Select an image on iOS Tap Print → choose printer/server Set Finishing Options → Punch Print Observed: Finishing options not applied IPP trace shows no finisher attributes in the request working scenario: Select any Preset (e.g., Color) before printing Finishing options are then included in IPP and applied Note: Issue does not occur when printing PDFs from iOS; finisher attributes are sent correctly. Is this expected AirPrint behavior for image jobs, or could this be a bug in how iOS constructs the IPP request for photos?

Hi everyone, I observed a behavior with AirPrint from an iPhone and wanted to confirm if this is expected behavior from iOS. Scenario tested: File type: Photo Print-quality selected by the user: Normal Observation (from packet capture): When checking the PCAP for the request sent from the iPhone, the print-quality attribute is always sent as high, even though the user selected Normal in the UI. Question: Is this an expected behavior in iOS/AirPrint where photos are always sent with print-quality=high regardless of the user-selected print quality? Or could this be a bug?

Kevin's Guide to DEXT Signing The question of "How do I sign a DEXT" comes up a lot, so this post is my attempt to describe both what the issues are and the best current solutions are. So... The Problems: When DEXTs were originally introduced, the recommended development signing process required disabling SIP and local signing. There is a newer, much simpler process that's built on Xcode's integrated code-signing support; however, that newer process has not yet been integrated into the documentation library. In addition, while the older flow still works, many of the details it describes are no longer correct due to changes to Xcode and the developer portal. DriverKit's use of individually customized entitlements is different than the other entitlements on our platform, and Xcode's support for it is somewhat incomplete and buggy. The situation has improved considerably over time, particularly from Xcode 15 and Xcode 16, but there are still issues that are not fully resolved. To address #1, we introduced "development" entitlement variants of all DriverKit entitlements. These entitlement variants are ONLY available in development-signed builds, but they're available on all paid developer accounts without any special approval. They also allow a DEXT to match against any hardware, greatly simplifying working with development or prototype hardware which may not match the configuration of a final product. Unfortunately, this also means that DEXT developers will always have at least two entitlement variants (the public development variant and the "private" approved entitlement), which is what then causes the problem I mentioned in #2. The Automatic Solution: If you're using Xcode 16 or above, then Xcode's Automatic code sign support will work all DEXT Families, with the exception of distribution signing the PCI and USB Families. For completeness, here is how that Automatic flow should work: Change the code signing configuration to "Automatic". Add the capability using Xcode. (USB & PCI) Edit your Entitlement.plist to include the correct "Development Only" configuration: USB Development Only Configuration: <key>com.apple.developer.driverkit.transport.usb</key> <array> <dict> <key>idVendor</key> <string>*</string> </dict> </array> PCI Development Only Configuration: <key>com.apple.developer.driverkit.transport.pci</key> <array> <dict> <key>IOPCIPrimaryMatch</key> <string>0xFFFFFFFF&amp;0x00000000</string> </dict> </array> If you've been approved for one of these entitlements, the one oddity you'll see is that adding your approved capability will add both the approved AND the development variant, while deleting either will delete both. This is a visual side effect of #2 above; however, aside from the exception described below, it can be ignored. Similarly, you can sign distribution builds by creating a build archive and then exporting the build using the standard Xcode flow. Debugging Automatic Code-signing In a new project, the flow I describe above should just work; however, if you're converting an existing project, you may get code signing errors, generally complaining about how the provisioning profile configuration doesn't match. In most cases, this happens because Xcode is choosing to reuse a previously downloaded profile with an older configuration instead of generating a new configuration which would then include the configuration changes you made. Currently, you can find these profile files in: ~/Library/Developer/Xcode/UserData/Provisioning Profiles ...which can make it easier to find and delete the specific profile (if you choose). However, one recommendation I'd have here is to not treat the contents of that folder as "precious" or special. What automatic code signing actually does is generate provisioning profiles "on demand", so if you delete an automatic profile... Xcode will just generate it again at the next build. Manually generating profiles is more cumbersome, but the solution there is to preserve them as a separate resource, probably as part of your project data, NOT to just "lose" them in the folder here. If they get deleted from Xcode's store, then you can just copy them back in from your own store (or using Xcode, which can manually download profiles as well). The advantage of this approach is that when profiles "pile up" over time (which they tend to do), you can just delete[1] all of them then let Xcode regenerate the ones you're actually trying to investigate. In terms of looking at their contents, TN3125: Inside Code Signing: Provisioning Profiles has the details of how to see exactly what's there. [1] Moving them somewhere else works too, but could indicate a fear of commitment. __ Kevin Elliott DTS Engineer, CoreOS/Hardware

I am writing a DriverKit driver for the first that uses the USBSerialDriverKit. The driver its purpose is to expose the device as serial interface (/dev/cu.tetra-pei0 or something like this). My problem: I don't see any logs from that driver in the console and I tried like 40 different approaches and checked everything. The last message I see is that the driver get successfully added to the system it is in the list of active and enabled system driver extensions but when I plug the device in none of my logs appear and it doesn't show up in ioreg. So without my driver the target device looks like this: +-o TETRA PEI interface@02120000 <class IOUSBHostDevice, id 0x10000297d, registered, matched, active, busy 0 (13 ms), retain 30> | { | "sessionID" = 268696051410 | "USBSpeed" = 3 | "UsbLinkSpeed" = 480000000 | "idProduct" = 36886 | "iManufacturer" = 1 | "bDeviceClass" = 0 | "IOPowerManagement" = {"PowerOverrideOn"=Yes,"DevicePowerState"=2,"CurrentPowerState"=2,"CapabilityFlags"=32768,"MaxPowerState"=2,"DriverPowerState"=0} | "bcdDevice" = 9238 | "bMaxPacketSize0" = 64 | "iProduct" = 2 | "iSerialNumber" = 0 | "bNumConfigurations" = 1 | "UsbDeviceSignature" = <ad0c16901624000000ff0000> | "USB Product Name" = "TETRA PEI interface" | "locationID" = 34734080 | "bDeviceSubClass" = 0 | "bcdUSB" = 512 | "USB Address" = 6 | "kUSBCurrentConfiguration" = 1 | "IOCFPlugInTypes" = {"9dc7b780-9ec0-11d4-a54f-000a27052861"="IOUSBHostFamily.kext/Contents/PlugIns/IOUSBLib.bundle"} | "UsbPowerSinkAllocation" = 500 | "bDeviceProtocol" = 0 | "USBPortType" = 0 | "IOServiceDEXTEntitlements" = (("com.apple.developer.driverkit.transport.usb")) | "USB Vendor Name" = "Motorola Solutions, Inc." | "Device Speed" = 2 | "idVendor" = 3245 | "kUSBProductString" = "TETRA PEI interface" | "kUSBAddress" = 6 | "kUSBVendorString" = "Motorola Solutions, Inc." | } | +-o AppleUSBHostCompositeDevice <class AppleUSBHostCompositeDevice, id 0x100002982, !registered, !matched, active, busy 0, retain 5> | { | "IOProbeScore" = 50000 | "CFBundleIdentifier" = "com.apple.driver.usb.AppleUSBHostCompositeDevice" | "IOProviderClass" = "IOUSBHostDevice" | "IOClass" = "AppleUSBHostCompositeDevice" | "IOPersonalityPublisher" = "com.apple.driver.usb.AppleUSBHostCompositeDevice" | "bDeviceSubClass" = 0 | "CFBundleIdentifierKernel" = "com.apple.driver.usb.AppleUSBHostCompositeDevice" | "IOMatchedAtBoot" = Yes | "IOMatchCategory" = "IODefaultMatchCategory" | "IOPrimaryDriverTerminateOptions" = Yes | "bDeviceClass" = 0 | } | +-o lghub_agent <class AppleUSBHostDeviceUserClient, id 0x100002983, !registered, !matched, active, busy 0, retain 7> | { | "IOUserClientCreator" = "pid 1438, lghub_agent" | "IOUserClientDefaultLocking" = Yes | } | +-o IOUSBHostInterface@0 <class IOUSBHostInterface, id 0x100002986, registered, matched, active, busy 0 (5 ms), retain 9> | | { | | "USBPortType" = 0 | | "IOCFPlugInTypes" = {"2d9786c6-9ef3-11d4-ad51-000a27052861"="IOUSBHostFamily.kext/Contents/PlugIns/IOUSBLib.bundle"} | | "USB Vendor Name" = "Motorola Solutions, Inc." | | "bcdDevice" = 9238 | | "USBSpeed" = 3 | | "idProduct" = 36886 | | "IOServiceDEXTEntitlements" = (("com.apple.developer.driverkit.transport.usb")) | | "bInterfaceSubClass" = 0 | | "bConfigurationValue" = 1 | | "locationID" = 34734080 | | "USB Product Name" = "TETRA PEI interface" | | "bInterfaceProtocol" = 0 | | "iInterface" = 0 | | "bAlternateSetting" = 0 | | "idVendor" = 3245 | | "bInterfaceNumber" = 0 | | "bInterfaceClass" = 255 | | "bNumEndpoints" = 2 | | } | | | +-o lghub_agent <class AppleUSBHostInterfaceUserClient, id 0x100002988, !registered, !matched, active, busy 0, retain 6> | { | "UsbUserClientBufferStatistics" = {"IOMemoryDescriptor"=0,"IOBufferMemoryDescriptor"=0,"IOSubMemoryDescriptor"=0} | "IOUserClientCreator" = "pid 1438, lghub_agent" | "UsbUserClientBufferAllocations" = {"Bytes"=0,"Descriptors"=0} | "IOUserClientDefaultLocking" = Yes | } | +-o IOUSBHostInterface@1 <class IOUSBHostInterface, id 0x100002987, registered, matched, active, busy 0 (5 ms), retain 9> | { | "USBPortType" = 0 | "IOCFPlugInTypes" = {"2d9786c6-9ef3-11d4-ad51-000a27052861"="IOUSBHostFamily.kext/Contents/PlugIns/IOUSBLib.bundle"} | "USB Vendor Name" = "Motorola Solutions, Inc." | "bcdDevice" = 9238 | "USBSpeed" = 3 | "idProduct" = 36886 | "IOServiceDEXTEntitlements" = (("com.apple.developer.driverkit.transport.usb")) | "bInterfaceSubClass" = 0 | "bConfigurationValue" = 1 | "locationID" = 34734080 | "USB Product Name" = "TETRA PEI interface" | "bInterfaceProtocol" = 0 | "iInterface" = 0 | "bAlternateSetting" = 0 | "idVendor" = 3245 | "bInterfaceNumber" = 1 | "bInterfaceClass" = 255 | "bNumEndpoints" = 2 | } | +-o lghub_agent <class AppleUSBHostInterfaceUserClient, id 0x10000298a, !registered, !matched, active, busy 0, retain 6> { "UsbUserClientBufferStatistics" = {"IOMemoryDescriptor"=0,"IOBufferMemoryDescriptor"=0,"IOSubMemoryDescriptor"=0} "IOUserClientCreator" = "pid 1438, lghub_agent" "UsbUserClientBufferAllocations" = {"Bytes"=0,"Descriptors"=0} "IOUserClientDefaultLocking" = Yes } more details in my comment.

Since macOS 26.4 Beta 1, virtual HID devices created via DriverKit can no longer intercept key events from the built-in MacBook keyboard. External keyboards still work. This is confirmed and tracked here: https://github.com/pqrs-org/Karabiner-Elements/issues/4402 One possible lead (from LLM-assisted analysis of Apple's open-source IOHIDFamily code and cross-referencing community reports): macOS 26.4 Beta may have introduced or modified a security policy referred to as com.apple.iohid.protectedDeviceAccess, which could block IOHIDDeviceOpen for the Apple Internal Keyboard connected via SPI transport (AppleHIDTransportHIDDevice). This appears related to a "GamePolicy" check in IOHIDDeviceClass.m that gates whether processes can open HID devices. This has not been independently verified and may or may not be the root cause. This has far-reaching consequences. Karabiner-Elements alone has over 21,000 GitHub stars and is used by hundreds of thousands of macOS users for keyboard customization, accessibility workflows, ergonomic setups, and multilingual input. This change completely breaks its core functionality on any MacBook. Beyond Karabiner, this affects every developer building keyboard remapping, input customization, or accessibility tooling via DriverKit virtual HID devices — including commercial applications currently in development. I'd argue that the power and flexibility of keyboard customization on macOS is a genuine competitive advantage for the platform. Developers and power users choose Macs partly because tools like this exist. Restricting this capability would be detrimental to the ecosystem and to Apple's appeal among professional users. I'd like to understand: is this an intentional security change or a regression? If intentional, is there a migration path?

I have a driver extending IOUserUSBSerial and I want the device to show up as /dev/tty.mycustombasename-123 and /dev/cu. respectively. How can I achieve that?

MacOS(Apple Silicon) IOKit driver for FPGA DMA transmission, kernel panic. Hardware and software configuration: MAC mini M1 2020 16GB, macOS Ventura 13.0 or 13.7.8 FPGA device capability: 64-bit Complete description: We've developed a DMA driver for PCIe devices (FPGA) based on IOKit. The driver can start normally through kextload, and the bar mapping, DMA registers, etc. are all correct. I am testing DMA data transmission, but a kernel panic has occurred. The specific content of the panic is as follows: {"bug_type":"210","timestamp":"2026-01-28 14:35:30.00 +0800","os_version":"macOS 13.0 (22A380)","roots_installed":0,"incident_id":"61C9B820-8D1B-4E75-A4EB-10DC2558FA75"} { "build" : "macOS 13.0 (22A380)", "product" : "Macmini9,1", "socId" : "0x00008103", "kernel" : "Darwin Kernel Version 22.1.0: Sun Oct 9 20:14:30 PDT 2022; root:xnu-8792.41.9~2/RELEASE_ARM64_T8103", "incident" : "61C9B820-8D1B-4E75-A4EB-10DC2558FA75", "crashReporterKey" : "6435F6BD-4138-412A-5142-83DD7E5B4F61", "date" : "2026-01-28 14:35:30.16 +0800", "panicString" : "panic(cpu 0 caller 0xfffffe0026c78c2c): "apciec[pcic0-bridge]::handleInterrupt: Request address is greater than 32 bits linksts=0x99000001 pcielint=0x02220060 linkcdmsts=0x00000000 (ltssm 0x11=L0)\n" @AppleT8103PCIeCPort.cpp:1301\nDebugger message: panic\nMemory ID: 0x6\nOS release type: User\nOS version: 22A380\nKernel version: Darwin Kernel Version 22.1.0: Sun Oct 9 20:14:30 PDT 2022; root:xnu-8792.41.9~2/RELEASE_ARM64_T8103\nFileset Kernelcache UUID: C222B4132B9708E5E0E2E8B8C5896410\nKernel UUID: 0BFE6A5D-118B-3889-AE2B-D34A0117A062\nBoot session UUID: 61C9B820-8D1B-4E75-A4EB-10DC2558FA75\niBoot version: iBoot-8419.41.10\nsecure boot?: YES\nroots installed: 0\nPaniclog version: 14\nKernelCache slide: 0x000000001d1b4000\nKernelCache base: 0xfffffe00241b8000\nKernel slide: 0x000000001e3f8000\nKernel text base: 0xfffffe00253fc000\nKernel text exec slide: 0x000000001e4e0000\nKernel text exec base: 0xfffffe00254e4000\nmach_absolute_time: 0x907c3082\nEpoch Time: sec usec\n Boot : 0x6979adbb 0x00023a6a\n Sleep : 0x00000000 0x00000000\n Wake : 0x00000000 0x00000000\n Calendar: 0x6979ae1a 0x00064953\n\nZone info:\n Zone map: 0xfffffe1000834000 - 0xfffffe3000834000\n . VM : 0xfffffe1000834000 - 0xfffffe14cd500000\n . RO : 0xfffffe14cd500000 - 0xfffffe1666e98000\n . GEN0 : 0xfffffe1666e98000 - 0xfffffe1b33b64000\n . GEN1 : 0xfffffe1b33b64000 - 0xfffffe2000830000\n . GEN2 : 0xfffffe2000830000 - 0xfffffe24cd4fc000\n . GEN3 : 0xfffffe24cd4fc000 - 0xfffffe299a1c8000\n . DATA : 0xfffffe299a1c8000 - 0xfffffe3000834000\n Metadata: 0xfffffe3f4d1ac000 - 0xfffffe3f551ac000\n Bitmaps : 0xfffffe3f551ac000 - 0xfffffe3f5ac94000\n\nCORE 0 recently retired instr at 0xfffffe002569d7a0\nCORE 1 recently retired instr at 0xfffffe002569eea0\nCORE 2 recently retired instr at 0xfffffe002569eea0\nCORE 3 recently retired instr at 0xfffffe002569eea0\nCORE 4 recently retired instr at 0xfffffe002569eea0\nCORE 5 recently retired instr at 0xfffffe002569eea0\nCORE 6 recently retired instr at 0xfffffe002569eea0\nCORE 7 recently retired instr at 0xfffffe002569eea0\nTPIDRx_ELy = {1: 0xfffffe2000c23010 0: 0x0000000000000000 0ro: 0x0000000000000000 }\nCORE 0 PVH locks held: None\nCORE 1 PVH locks held: None\nCORE 2 PVH locks held: None\nCORE 3 PVH locks held: None\nCORE 4 PVH locks held: None\nCORE 5 PVH locks held: None\nCORE 6 PVH locks held: None\nCORE 7 PVH locks held: None\nCORE 0 is the one that panicked. Check the full backtrace for details.\nCORE 1: PC=0xfffffe00279db94c, LR=0xfffffe00260d5d9c, FP=0xfffffe8ffecaf850\nCORE 2: PC=0xfffffe0025be76b0, LR=0xfffffe0025be7628, FP=0xfffffe8fff08f5f0\nCORE 3: PC=0x00000001c7cacd78, LR=0x00000001c7cacd84, FP=0x000000016f485130\nCORE 4: PC=0xfffffe002557f55c, LR=0xfffffe002557f55c, FP=0xfffffe8ffe1dff00\nCORE 5: PC=0xfffffe002557f55c, LR=0xfffffe002557f55c, FP=0xfffffe8fff5eff00\nCORE 6: PC=0xfffffe002557f55c, LR=0xfffffe002557f55c, FP=0xfffffe8ffed8bf00\nCORE 7: PC=0xfffffe002557f55c, LR=0xfffffe002557f55c, FP=0xfffffe8fff11bf00\nCompressor Info: 0% of compressed pages limit (OK) and 0% of segments limit (OK) with 0 swapfiles and OK swap space\nPanicked task 0xfffffe1b33aad678: 0 pages, 470 threads: pid 0: kernel_task\nPanicked thread: 0xfffffe2000c23010, backtrace: 0xfffffe8fff6eb6a0, tid: 265\n\t\t ... Kernel Extensions in backtrace:\n com.apple.driver.AppleT8103PCIeC(1.0)[A595D104-026A-39E5-93AA-4C87CE8C14D2]@0xfffffe0026c619d0->0xfffffe0026c86c97\n dependency: com.apple.driver.AppleARMPlatform(1.0.2)[11A9713E-6739-3A4C-8571-2D8EAA062278]@0xfffffe0025f13ff0->0xfffffe0025f6255f\n dependency: com.apple.driver.AppleEmbeddedPCIE(1)[E71CBCCD-AEB8-3E7B-933D-4FED4241BF13]@0xfffffe002654e0b0->0xfffffe00265684c7\n dependency: com.apple.driver.ApplePIODMA(1)[A419BABC-A7A3-316D-A150-7C2C2D1F6D53]@0xfffffe00269a24b0->0xfffffe00269a6c3b\n dependency: com.apple.driver.IODARTFamily(1)[03997E20-8A3F-3412-A4E8-BD968A75A07D]@0xfffffe00275bcf50->0xfffffe00275d0a3f\n dependency: com.apple.iokit.IOPCIFamily(2.9)[EC78F47B-530B-3F87-854E-0A0A5FD9BBB2]@0xfffffe0027934350->0xfffffe002795f3d3\n dependency: com.apple.iokit.IOReportFamily(47)[843B39D3-146E-3992-B7C7-960148685DC8]@0xfffffe0027963010->0xfffffe0027965ffb\n dependency: com.apple.iokit.IOThunderboltFamily(9.3.3)[B22BC005-BB7B-32A3-99C0-39F3BDBD8E54]@0xfffffe0027a5e3f0->0xfffffe0027b9a1a3\n\nlast started kext at 1915345919: com.sobb.pcie-dma\t1.0.0d1 (addr 0xfffffe00240e47f0, size 9580)\nlast stopped kext at 1774866338: com.sobb.pcie-dma\t1.0.0d1 (addr 0xfffffe00240e47f0, size 9580)\nloaded It seems that the DMA request address initiated by FPGA exceeded 32 bits, which was intercepted by PCIe root port and resulted in a kernel panic.This is also the case on macOS (M2). I have tried the following code interface: IOBufferMemoryDescriptor： a. withCapacity(bufferSize, kIODirectionInOut, true)； b. inTaskWithPhysicalMask(kernel_task, kIODirectionInOut, bufferSize, 0x00000000FFFFFFFFULL)。 The physical addresses of the constructed descriptors are all >32 bits; IODMACommand： a. withSpecification(kIODMACommandOutputHost64, 64, 0, IODMACommand::kMapped, 0, 0)，gen64IOVMSegments() The allocated IOVM address must be>32 bits, which will generate a kernel panic when used later. b.withSpecification(kIODMACommandOutputHost32, 32, 0, IODMACommand::kMapped, 0, 0)，gen32IOVMSegments() The allocation of IOVM failed with error code kIOReturnenMessageTooLarge. So after the above attempts, the analysis shows that the strategy of Dart+PCIe root port on macOS (Apple Silicon) is causing the failure of 64 bit DMA address transfer. I have two questions: a. Does Dart in macOS (Apple Silicon) definitely not allocate <=32-bit IOVM addresses? b. Is there any other way to achieve DMA transfer for FGPA devices on macOS (Apple Silicon)? Thanks！

We have developed an IOPCIFamily based custom KEXT to communicate with Thunderbolt interface storage device. This KEXT is working fine with Apple machines with Intel CPUs in all types of machines (iMac, iMac Pro and MacBooks). We tested this KEXT with Apple Silicon M1 machine where we are observing crash for the very first command we send to the Thunderbolt device. We observed that there is difference in number of bits in Physical Address we use for preparing command PRPs. In Intel machines we get 28-Bit Physical Address whereas in M1 we are getting 36-Bit address used for PRPs. We use inTaskWithPhysicalMask api to allocate memory buffer we use for preparing command PRPs. Below are the options we have used for this: options: kIOMemoryPhysicallyContiguous | kIODirectionInOut capacity: 16kb physicalMask: 0xFFFFF000UL (We want 4kb aligned memory) According to below documentation, we have to use inTaskWithPhysicalMask api to get memory below 4gb. https://developer.apple.com/library/archive/documentation/Darwin/Conceptual/64bitPorting/KernelExtensionsandDrivers/KernelExtensionsandDrivers.html#//apple_ref/doc/uid/TP40001064-CH227-SW1 Some devices can only handle physical addresses that fit into 32 bits. To the extent that it is possible to use 64-bit addresses you should do so, but for these devices, you can either use IODMACommand or the initWithPhysicalMask method of IOBufferMemoryDescriptor to allocate a bounce buffer within the bottom 4 GB of physical memory. So just want to know what's the difference between Intel and ARM64 architecture with respect to physical memory access. Is there any difference between byte order for physical memory address..?? Crash log is given below: panic(cpu 0 caller 0xfffffe0016e08cd8): "apciec[0:pcic0-bridge]::handleInterrupt: Request address is greater than 32 bits linksts=0x99000001 pcielint=0x00020000 linkcdmsts=0x00000800 (ltssm 0x11=L0)\n" Debugger message: panic Memory ID: 0x6 OS release type: User OS version: 20C69 Kernel version: Darwin Kernel Version 20.2.0: Wed Dec 2 20:40:21 PST 2020; root:xnu-7195.60.75~1/RELEASEARM64T8101 Fileset Kernelcache UUID: 3E6AA74DF723BCB886499A5AAB34FA34 Kernel UUID: 48F71DB3-6C91-3E62-9576-3A1DCEF2B536 iBoot version: iBoot-6723.61.3 secure boot?: YES Paniclog version: 13 KernelCache slide: 0x000000000dbfc000 KernelCache base: 0xfffffe0014c00000 Kernel slide: 0x000000000e73c000 Kernel text base: 0xfffffe0015740000 Kernel text exec base: 0xfffffe0015808000 machabsolutetime: 0x12643a9c5 Epoch Time: sec usec Boot : 0x5fe06736 0x0009afbc Sleep : 0x00000000 0x00000000 Wake : 0x00000000 0x00000000 Calendar: 0x5fe067fd 0x0006569d CORE 0 recently retired instr at 0xfffffe0015971798 CORE 1 recently retired instr at 0xfffffe0015972c5c CORE 2 recently retired instr at 0xfffffe0015972c5c CORE 3 recently retired instr at 0xfffffe0015972c5c CORE 4 recently retired instr at 0xfffffe0015972c60 CORE 5 recently retired instr at 0xfffffe0015972c60 CORE 6 recently retired instr at 0xfffffe0015972c60 CORE 7 recently retired instr at 0xfffffe0015972c60 Panicked task 0xfffffe166ce9e550: 75145 pages, 462 threads: pid 0: kernel_task Panicked thread: 0xfffffe166d053918, backtrace: 0xfffffe306cb4b6d0, tid: 141 lr: 0xfffffe0015855f8c fp: 0xfffffe306cb4b740 lr: 0xfffffe0015855d58 fp: 0xfffffe306cb4b7b0 lr: 0xfffffe0015977f5c fp: 0xfffffe306cb4b7d0 lr: 0xfffffe0015969914 fp: 0xfffffe306cb4b880 lr: 0xfffffe001580f7e8 fp: 0xfffffe306cb4b890 lr: 0xfffffe00158559e8 fp: 0xfffffe306cb4bc20 lr: 0xfffffe00158559e8 fp: 0xfffffe306cb4bc90 lr: 0xfffffe0015ff03f8 fp: 0xfffffe306cb4bcb0 lr: 0xfffffe0016e08cd8 fp: 0xfffffe306cb4bd60 lr: 0xfffffe00166bc778 fp: 0xfffffe306cb4be30 lr: 0xfffffe0015f2226c fp: 0xfffffe306cb4be80 lr: 0xfffffe0015f1e2f4 fp: 0xfffffe306cb4bec0 lr: 0xfffffe0015f1f050 fp: 0xfffffe306cb4bf00 lr: 0xfffffe0015818c14 fp: 0x0000000000000000 Kernel Extensions in backtrace: com.apple.driver.AppleEmbeddedPCIE(1.0)[4F37F34B-EE1B-3282-BD8B-00009B954483]@0xfffffe00166b4000->0xfffffe00166c7fff dependency: com.apple.driver.AppleARMPlatform(1.0.2)[5CBA9CD0-E248-38E3-94E5-4CC5EAB96DE1]@0xfffffe0016148000->0xfffffe0016193fff dependency: com.apple.driver.IODARTFamily(1)[88B19766-4B19-3106-8ACE-EC29201F00A3]@0xfffffe0017890000->0xfffffe00178a3fff dependency: com.apple.iokit.IOPCIFamily(2.9)[5187699D-1DDC-3763-934C-1C4896310225]@0xfffffe0017c48000->0xfffffe0017c63fff dependency: com.apple.iokit.IOReportFamily(47)[93EC9828-1413-3458-A6B2-DBB3E24540AE]@0xfffffe0017c64000->0xfffffe0017c67fff com.apple.driver.AppleT8103PCIeC(1.0)[35AEB73B-D51E-3339-AB5B-50AC78740FB8]@0xfffffe0016e04000->0xfffffe0016e13fff dependency: com.apple.driver.AppleARMPlatform(1.0.2)[5CBA9CD0-E248-38E3-94E5-4CC5EAB96DE1]@0xfffffe0016148000->0xfffffe0016193fff dependency: com.apple.driver.AppleEmbeddedPCIE(1)[4F37F34B-EE1B-3282-BD8B-00009B954483]@0xfffffe00166b4000->0xfffffe00166c7fff dependency: com.apple.driver.ApplePIODMA(1)[A8EFA5BD-B11D-3A84-ACBD-6DB25DBCD817]@0xfffffe0016b0c000->0xfffffe0016b13fff dependency: com.apple.iokit.IOPCIFamily(2.9)[5187699D-1DDC-3763-934C-1C4896310225]@0xfffffe0017c48000->0xfffffe0017c63fff dependency: com.apple.iokit.IOReportFamily(47)[93EC9828-1413-3458-A6B2-DBB3E24540AE]@0xfffffe0017c64000->0xfffffe0017c67fff dependency: com.apple.iokit.IOThunderboltFamily(9.3.2)[11617399-2987-322D-85B6-EF2F1AD4A794]@0xfffffe0017d80000->0xfffffe0017e93fff Stackshot Succeeded Bytes Traced 277390 (Uncompressed 703968) ** System Information: Apple Silicon M1 BigSur 11.1 Model: Macmini9,1 Any help or suggestion is really appreciated. Thanks

Dear Support Team, ​I am writing to seek technical assistance regarding a persistent issue with Dolby Vision exporting in DaVinci Resolve 20 on my iPad Pro 12.9-inch (2021, M1 chip) running iPadOS 26.0.1. ​The Issue: Despite correctly configuring the project for a Dolby Vision workflow and successfully completing the dynamic metadata analysis, the "Dolby Vision Profile" dropdown menu (and related embedding options) is completely missing from the Advanced Settings in the Deliver page. ​My Current Configuration & Steps Taken: ​Software Version: DaVinci Resolve Studio 20 (Studio features like Dolby Vision analysis are active and functional). ​Project Settings: Color Science: DaVinci YRGB Color Managed. ​Dolby Vision: Enabled (Version 4.0) with Mastering Display set to 1000 nits. ​Output Color Space: Rec.2100 ST2084. ​Color Page: Dynamic metadata analysis has been performed, and "Trim" controls are functional. ​Export Settings: ​Format: QuickTime / MP4. ​Codec: H.265 (HEVC). ​Encoding Profile: Main 10. ​The Problem: Under "Advanced Settings," there is no option to select a Dolby Vision Profile (e.g., Profile 8.4) or to "Embed Dolby Vision Metadata." ​Potential Variables: ​System Version: I am currently running iPadOS 26. ​Apple ID: My iPad is currently not logged into an Apple ID. I suspect this might be preventing the app from accessing certain system-level AVFoundation frameworks or Dolby DRM/licensing certificates required for metadata embedding. ​Could you please clarify if the "Dolby Vision Profile" option is dependent on a signed-in Apple ID for hardware-level encoding authorization, or if this is a known compatibility issue with the current iPadOS 26 build? ​I look forward to your guidance on how to resolve this. ​Best regards, INSOFT_Fred

I'm developing a DriverKit USB driver for iPadOS that needs to communicate with a vendor-class USB device (bInterfaceClass = 0xFF) as I need to communicate with a USB device using a custom protocol over IOUSBHostPipe for bulk transfers. Current Configuration: Info.plist: IOProviderClass = IOUSBHostDevice Device: bDeviceClass = 0, bInterfaceClass = 0xFF (vendor-specific) What Works: Driver matches and loads successfully Start_Impl() executes device->Open() succeeds device->SetConfiguration() succeeds The Problem: uintptr_t iterRef = 0; kern_return_t ret = device->CreateInterfaceIterator(&iterRef); Result: ret = kIOReturnSuccess (0x0), but iterRef = 0 (empty iterator) What I've Tried: Matching IOUSBHostInterface directly - Driver is loaded, but extension never executed Current approach (IOUSBHostDevice) - Driver extension loads and starts, but CreateInterfaceIterator returns empty Question: Does iPadOS allow third-party DriverKit extensions to access vendor-class (0xFF) USB devices? That is, iPadOS, is there a way for a third-party DriverKit extension to access IOUSBHostInterface objects for vendor-class (0xFF) USB devices?

I am trying to add a few properties to an IOUSBHostDevice but the SetProperties is returning kIOReturnUnsupported. The reason I am trying to modify the IOUSBHostDevice's properties is so we can support a MacBook Air SuperDrive when it is attached to our docking station devices. The MacBook Air SuperDrive needs a high powered port to run and this driver will help the OS realize that our dock can support it. I see that the documentation for SetProperties says: The default implementation of this method returns kIOReturnUnsupported. You can override this method and use it to modify the set of properties and values as needed. The changes you make apply only to the current service. Do I need to override IOUSBHostDevice? This is my current Start implementation (you can also see if in the Xcode project): kern_return_t IMPL(MyUserUSBHostDriver, Start) { kern_return_t ret = kIOReturnSuccess; OSDictionary * prop = NULL; OSDictionary * mergeProperties = NULL; bool success = true; os_log(OS_LOG_DEFAULT, "&gt; %s", __FUNCTION__); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = Start(provider, SUPERDISPATCH); __Require(kIOReturnSuccess == ret, Exit); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ivars-&gt;host = OSDynamicCast(IOUSBHostDevice, provider); __Require_Action(NULL != ivars-&gt;host, Exit, ret = kIOReturnNoDevice); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = ivars-&gt;host-&gt;Open(this, 0, 0); __Require(kIOReturnSuccess == ret, Exit); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = CopyProperties(&amp;prop); __Require(kIOReturnSuccess == ret, Exit); __Require_Action(NULL != prop, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); mergeProperties = OSDynamicCast(OSDictionary, prop-&gt;getObject("IOProviderMergeProperties")); mergeProperties-&gt;retain(); __Require_Action(NULL != mergeProperties, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); OSSafeReleaseNULL(prop); ret = ivars-&gt;host-&gt;CopyProperties(&amp;prop); __Require(kIOReturnSuccess == ret, Exit); __Require_Action(NULL != prop, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); os_log(OS_LOG_DEFAULT, "%s : %s", "USB Product Name", ((OSString *) prop-&gt;getObject("USB Product Name"))-&gt;getCStringNoCopy()); os_log(OS_LOG_DEFAULT, "%s : %s", "USB Vendor Name", ((OSString *) prop-&gt;getObject("USB Vendor Name"))-&gt;getCStringNoCopy()); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); success = prop-&gt;merge(mergeProperties); __Require_Action(success, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = ivars-&gt;host-&gt;SetProperties(prop); // this is no working __Require(kIOReturnSuccess == ret, Exit); Exit: OSSafeReleaseNULL(mergeProperties); OSSafeReleaseNULL(prop); os_log(OS_LOG_DEFAULT, "err ref %d", kIOReturnUnsupported); os_log(OS_LOG_DEFAULT, "&lt; %s %d", __FUNCTION__, ret); return ret; }

1. 环境描述 (Environment) OS: macOS 26.2 Hardware: Apple Silicon (M1/M2/M3) DriverKit SDK: DriverKit 19.0 / 20.0 Arch: Universal (x86_64, arm64, arm64e) SIP Status: Enabled (Works perfectly when Disabled) 2. 问题现象 (Problem Description) 在开启 SIP 的环境下，USB 驱动扩展（Dext）能安装，但插入设备时无法连接设备（驱动的Start方法未被调用）。 驱动状态： MacBook-Pro ~ % systemextensionsctl list 1 extension(s) --- com.apple.system_extension.driver_extension (Go to 'System Settings > General > Login Items & Extensions > Driver Extensions' to modify these system extension(s)) enabled active teamID bundleID (version) name [state] * * JK9U78YRLU com.ronganchina.usbapp.MyUserUSBInterfaceDriver (1.3/4) com.ronganchina.usbapp.MyUserUSBInterfaceDriver [activated enabled] 关键日志证据 (Key Logs) KernelManagerd: Error Domain=NSPOSIXErrorDomain Code=8 "Exec format error" Syspolicyd: failed to fetch ... /_CodeSignature/CodeRequirements-1 error=-10 AppleSystemPolicy: ASP: Security policy would not allow process DriverKit Kernel: DK: MyUserUSBInterfaceDriver user server timeout dext的 embedded.provisionprofile 已包含： com.apple.developer.driverkit com.apple.developer.driverkit.transport.usb (idVendor: 11977)

Hello! We develop a SAS driver and a service application for DAS devices. When users in our application create a RAID array on the device: On the 1st step, our dext driver mounts a new volume. At this step DiskUtil automatically tries to mount it. As there is no file system on the new volume - the MacOS system popup appears "The disk you attached was not readable by the computer" On the 2nd step our application creates the file system on this new volume. So we do not need this MacOS system popup to appear (as it may frustrate our users). We found a way to disable the global auto mount but this solution also impacts on other devices (which is not good). Are there any other possibilities to prevent the popup "The disk you attached was not readable by the computer" from appearing?