Hello, I’m currently reviewing and implementing age assurance and parental approval flows using AgeRangeService and PermissionKit (AskCenter) in the context of Texas regulatory compliance requirements. While the high-level APIs are clear, there are several technical aspects where the intended usage patterns are not fully explicit in the documentation. Clarification on these points would help ensure our implementation aligns with system expectations and regulatory obligations. ⸻ Querying the current approval state for SignificantAppUpdateTopic AskCenter.ask(...) returns Void, and AskCenter.responses(for:) provides an AsyncSequence of approval events. Is there an official or recommended way to determine whether a SignificantAppUpdateTopic has already been approved when the app launches, or is listening for future responses events the only supported mechanism? ⸻ Behavior of AskCenter.responses(for:) regarding past approvals When subscribing to AskCenter.responses(for:): • Does the stream replay previously recorded approval or decline decisions? • Or does it only emit events that occur after subscription? This affects whether the listener must be registered early in the app lifecycle. ⸻ Recommended lifecycle timing for registering a responses(for:) listener What is the intended or recommended time to register a responses(for:) listener? • At application launch • Immediately before calling ask(...) • When entering a specific gated feature Clarification on the expected lifecycle usage would be helpful. ⸻ Repeated calls to ask(...) after approval If AskCenter.ask(...) is called again for the same SignificantAppUpdateTopic after parental approval has already been granted: • Is the request ignored? • Is a new approval request sent to the parent? • Or is the call handled idempotently by the system? ⸻ Delivery of approval results when the child app is not running If a parent approves or declines a SignificantAppUpdateTopic while the child app is not running: • Will the approval decision be delivered as a responses(for:) event on the next app launch? • Or is the app expected to persist approval state locally? ⸻ Persistence of approval state Is the approval decision for SignificantAppUpdateTopic persisted by the system at the OS level, or is the app responsible for storing approval state? Additionally, does the approval persist across: • app restarts? • app deletion and reinstallation? ⸻ Meaning of activeParentalControls.significantAppChangeApprovalRequired How is activeParentalControls.significantAppChangeApprovalRequired determined? • Is this value explicitly configured by a parent (for example via Screen Time)? • Or is it automatically determined by the system based on region, age, or regulatory requirements? ⸻ Relationship between significantAppChangeApprovalRequired and AgeRangeService When activeParentalControls contains significantAppChangeApprovalRequired, is it still expected that apps call AgeRangeService.requestAgeRange(...)? Or can the presence of this flag be treated as sufficient indication that the user is a minor for gating purposes? ⸻ Recommended interpretation of AgeRangeDeclaration Is the intended usage of AgeRangeDeclaration to handle each case individually, or is it acceptable and recommended to interpret the values as different trust levels (for example, self-declared vs. government ID or payment verified)? ⸻ Clarification on these points would help ensure that implementations of age assurance and parental approval flows are consistent with system behavior while meeting regulatory compliance requirements. Thank you for your guidance.

I’m trying to fully understand the purpose of the ageGates parameter in the AgeRangeService.requestAgeRange API. The official documentation includes the following statement: “The system may return geo-specific age ranges that override your provided age gates based on the person’s location and applicable regulations. When geo-specific ranges are required, the returned age range reflects regulatory requirements rather than the bounds of your age gates.” Based on this, it seems that even if my app provides specific age thresholds through the ageGates parameter, the system may override those boundaries depending on regional laws or regulations, and return a completely different lowerBound / upperBound than what my age gates would suggest. My current understanding is: ageGates indicates the thresholds my app uses to define its internal feature tiers, but the actual age range returned by the OS is determined by legal or regional requirements (e.g., COPPA, GDPR-K, AADC, SB2420), meaning the returned age range may not align with the age ranges implied by my ageGates values. I’d like to confirm whether this interpretation is correct. Additionally, if different regions may produce different lowerBound / upperBound values due to regulatory requirements, then it seems that: developers shouldn’t rely on fixed age buckets, and instead must implement feature gating logic dynamically based on whatever age range the OS returns. So my questions are: Is my understanding correct that ageGates is simply a hint that describes my app’s tier thresholds, and the OS may override those boundaries to comply with local regulations? If lowerBound / upperBound can vary across regions, what is the recommended way for developers to design their feature-gating logic? Should we avoid hardcoded age buckets and instead build flexible logic that adapts to whatever range the OS returns? I’d appreciate clarification so I can design our age-based policies appropriately and in a regulation-compliant way.

I followed the method outlined in Apple's documentation to test "Revocation of Consent." Our server received the notification sent by Apple, but the parsed data only contains the following content (some data has been modified for privacy, but the fields remain unchanged): { "receiptType": "Sandbox", "bundleId": "com.xxx.xxxxx", "receiptCreationDate": 1764932591296, "requestDate": 1764932591296, "originalPurchaseDate": 1375340400000, "originalApplicationVersion": "1.0", "appTransactionId": "705020051250081000", "originalPlatform": "iOS" } How can we identify that "a parent/guardian has revoked authorization for a specific user"? We are unable to determine which minor user should be restricted from using certain features of our app. I hope to receive a prompt response from Apple's technical experts! Thanks A Lot ！

I’m testing FinanceKit with Apple Cash and noticed that transfers don’t include any counterparty information. Here’s an example transaction I fetched: Transaction( id: 5A96EA49-B7C9-4481-949D-88247210C1D7, accountID: 28D7C0E2-DC2A-4138-B105-BCE5EE00B705, transactionAmount: 30 USD, creditDebitIndicator: .credit, transactionDescription: "Transfer", originalTransactionDescription: "", merchantCategoryCode: nil, merchantName: nil, transactionType: .transfer, status: .booked, transactionDate: 2025-08-19 21:57:54 +0000, postedDate: 2025-08-19 21:57:55 +0000 ) As you can see: transactionDescription is just "Transfer" originalTransactionDescription is empty merchantName is nil No counterparty details are exposed In contrast, the Wallet app clearly shows the other person’s name and avatar for Apple Cash transfers, making it easy to understand who the payment was with. In FinanceKit, there’s no way to distinguish between transfers with different people — every transfer looks identical. Questions Is there a hidden or planned field for Apple Cash counterparty information? Can FinanceKit provide at least minimal metadata (e.g., contact name, initials, or a privacy-preserving identifier)? Is there any workaround today to correlate Apple Cash transfers with contacts? Feature request: Please expose counterparty information for Apple Cash transfers. Even something as simple as a stable identifier or name string would enable developers to build Wallet-quality transaction detail screens. Thanks!

Does WeatherKit Rest api have the following forecast endpoints? Pollen and Flu Air quality Radar forecast served through a REST API? Hail Solar energy Frost Potential Index

At WWDC25 we launched a new type of Lab event for the developer community - Group Labs. A Group Lab is a panel Q&A designed for a large audience of developers. Group Labs are a unique opportunity for the community to submit questions directly to a panel of Apple engineers and designers. Here are the highlights from the WWDC25 Group Lab for watchOS (part 2). 7. For widget (complication) update budgets, is there an overall budget or are scheduled update separate from APNS updates? For context I have a complication that is updated on a fixed schedule (every 20 min), but there can be times of the day that are more "interesting" where pushes make sense. Like timeline updates, the system budgets WidgetKit push notifications and delivers them opportunistically. You can use WidgetKit push notification updates as an addition to timeline updates. For more information, see Updating widgets with WidgetKit push notifications. 8. It seems like the new Control Center widgets can be sourced from either the iPhone or directly on the Watch. Can we control whether a control appears in the watch list, or will it always be a combination of all controls from both sources? iPhone controls will be automatically available on the companion Apple Watch, even if they don’t have an associated watchOS app. When an iPhone control is tapped on the Apple Watch, the action is performed on the iPhone. Controls whose actions foreground the iOS app will not appear on Apple Watch. If a watchOS app has controls, no controls will appear on Apple Watch from the companion iOS app. 9. From UI/UX perspective, what are the current practices for Designing watchOS apps that feels native. The WWDC23 session Design and build apps for WatchOS 10 covers the details of watchOS design principles and how to apply them in your app using SwiftUI. A lot of SwiftUI APIs, such as NavigationSplitView, vertical tab view, list view, and etc, already implement the look and feel native to watchOS. 10. When adopting the new design system on watchOS, it seems like the main place we will use the glass effect is for our buttons in toolbar? Standard buttons in system apps seem to continue to use a flat appearance and full width. We leave the choice to you – You can use the new GlassButtonStyle API or .buttonStyle(.glass) to apply the liquid glass material to buttons. Learn when to use the Liquid Glass styles in Get to know the new design system. 11. Is there any way to gracefully migrate extensions when their bundleIDs have to change? e.g., converting a multi-target watch app to single-target, which drops the .watchkitextension from both the app and WidgetKit ext bundleIDs Updating a watchOS app to single-target is covered in TechNote TN3157: Updating your watchOS project for SwiftUI and WidgetKit. Xcode provides a tool that can do the update automatically, and the technote describes the details about how to use it and how to clean up the project after the automatic update. If there's something that technote doesn't address, please reach out to us on the Developer Forums. 12. What is the status of WatchConnectivity? Is that still the preferred way for iOS + watchOS communications? The Watch Connectivity framework is still supported, and is appropriate for the communication between an watchOS app and its companion iOS app. The systems also provide other APIs for the apps to exchange data. For example, watchOS supports Apple Push Notification service (APNs). If data for your widget changes on your server, your widget can receive a WidgetKit push notification, and update accordingly. That’s the preferred mechanism for widget updates.

Hi, A lot of e-mail providers supports OAuth2 authentication. However, Mail.app on macOS and iOS do not support configuring a mail account that would use OAuth2 authentication, unless it's on its hardcoded list of account providers. Is there any framework that allows setting up a custom account for my institution, so that we could begin to offer OAuth2 authentication for mail and calendar?

testing

I'm currently experimenting with AlarmKit and, when configuring an alarm with a Relative schedule, but that never repeats, I find that it is still scheduled in the AlarmManager, but the documentation says that an alarm that has no repeat schedule will be removed from the AlarmManager after firing. This behavior is experienced both in my project and with the sample code AlarmKit-ScheduleAndAlert To reproduce, create a non-repeating alarm, and, after firing, it will still be on the list marked as Scheduled Am I doing something wrong or is this a bug?

Dear Apple Engineers： My app utilizes the App Clip experience. I would like to prevent the App Clip card from appearing when the host app is running in the foreground. How can this be achieved? I have observed that Alipay (in China) does not display an App Clip card when the device is tapped against a tag while the app is in the foreground, which indicates that this behavior is possible. Thank you for your assistance.

Hey guys! I've recently noticed a number of PaaS'es and CPaaS'es offering bulk outgoing messaging using the iMessage the same way it's done with the SMS. I always thought that iMessage sort of only allowed businesses to send outgoings subject to user contacting their account first (to avoid being spammed). But then there's those I mentioned above. Have you faced anything like this? Did Apple make changes to the model so that businesses can now initiate conversations with users? If so, how does it work?

Problem Description: After upgrading to iOS 26, I discovered that the ExtendedDistanceMeasurement feature in the Nearby Interaction framework is not working as expected. On the same device model, the issue did not occur on iOS 18, but it is present on iOS 26 (including the latest iOS 26.2), and it has started affecting the functionality of my app. I hope this issue can be resolved as soon as possible. Problem Details: On iOS 26 and later versions (including iOS 26.2), when using an iPhone and an Apple Watch both equipped with second-generation UWB chips, enabling isExtendedDistanceMeasurementEnabled initiates the distance measurement process successfully, but the distance information fails to update. The real-time distance between the devices does not display within the app. Affected Devices and Versions: iPhone Model: iPhone 15 Pro Max iOS Version: iOS 26.2 Apple Watch Model: Apple Watch 10 watchOS Version: 26.2 Example Code: The issue can be reproduced by adding the following code to the official sample code: Nearby Interaction Framework Sample Code private func didReceiveDiscoveryToken(_ token: NIDiscoveryToken) { if session == nil { initializeNISession() } if !didSendDiscoveryToken { sendDiscoveryToken() } os_log("running NISession with peer token: \(token)") let config = NINearbyPeerConfiguration(peerToken: token) // The issue can be reproduced by adding the following code to the official sample code // Enable extended distance measurement if both devices support it if NISession.deviceCapabilities.supportsExtendedDistanceMeasurement && token.deviceCapabilities.supportsExtendedDistanceMeasurement { config.isExtendedDistanceMeasurementEnabled = true } session?.run(config) } Problem Behavior: When either the iPhone or the Apple Watch does not support the second-generation UWB chip (i.e., deviceCapabilities.supportsExtendedDistanceMeasurement = false), the code works as expected. However, when both the iPhone and the Apple Watch support the second-generation UWB chip (i.e., deviceCapabilities.supportsExtendedDistanceMeasurement = true), the code fails to work, and the distance does not update — meaning the real-time distance between the devices is not displayed. Expectation: I hope this issue can be resolved soon, as it is impacting my app. The problem persists in the latest iOS 26.2, and has yet to be fixed.

Hi, I’m trying to open a GPX file (route.gpx) from the Files app on my iPhone using my app (e.g., Aqua Map). Since the latest iOS update (iOS 26), when I long-press the file and tap “Open with…”, my app does not appear in the list anymore. I’ve checked that my app has the correct permissions for Files and Folders. I’m wondering: Is this a user-side issue (Settings on iPhone)? Or does it require developer-side changes in the app (Info.plist / UTI declarations) to make .gpx files appear in “Open with…” or “Share” menus? What is the proper way to make my app appear as an option to open GPX files in Files.app on iOS 26? Thanks in advance!

I’m configuring App Clip launch behavior and would appreciate some clarification. In my setup, the App Clip launch URL is the same as the deep link used to open the full app. Both are configured in the Apple App Site Association (AASA) file. Observed behavior: Scanning a QR code with this URL correctly launches the App Clip. Tapping the same URL when it’s shared (for example, via Messages) launches the full app via the deep link instead of the App Clip experience. I’m reviewing the documentation here: https://developer.apple.com/documentation/appclip/configuring-the-launch-experience-of-your-app-clip#Choose-App-Clip-experiences-you-want-to-support The table mentions that an App Clip can be invoked via “A shared link to an App Clip in the Messages app.” However, when I tap the shared link in Messages, the deep link experience is triggered instead of the App Clip. My questions are: Is this behavior expected when the App Clip URL and the app’s deep link URL are the same? Does launching an App Clip from a shared Messages link require a distinct URL or additional configuration beyond what’s in the AASA file? Are there specific constraints or priorities between universal links for the full app and App Clip invocation in this scenario? Any clarification or guidance would be greatly appreciated. Thank you.

Is there a way to increase the frequency of UWB background ranging?

I want to localize the app name, user the String Catalog to set en, en-US, en-CA, however, when the phone language is set to English (United States), the app name is displayed in English, while when the phone language is set to French, the app name is displayed in English-United States. However, the base language of the app settings is English. How can I make it right?

I’m creating an app with the Screen Time API and I would like to know how to make the app show a parental control editing view for parents and a view for child accounts that shows which apps are blocked. How can I do this?

Hi, I’m working on a proof of concept for a CarPlay application where I need to display multiple Points of Interest, such as EV charging stations and fuel stations. The app will also allow users to book a selected Point of Interest (for example, an EV charging slot). I understand that the app can be registered under the Navigation (turn‑by‑turn) category, but I wanted to check whether it is also possible to register it under the Driving Task category. I also want to know if i can Register for multiple Categories for my car play application.

I found currently there is no way to revoke sharing age to an app after I shared to it, no matter in testing or in app settings

Hello everyone, I would like to know if there is any way for an iOS app to automatically access a user’s total Screen Time (for example, daily or weekly usage) and then share this with friends so they can compare results, like in a “Screen Time battle”? Thanks you very much for you help!