Hi, I’m seeing WeatherKit fail on device with a JWT permission error even though the app appears to be signed correctly with the WeatherKit entitlement. Error: Failed to generate jwt token for: com.apple.weatherkit.authservice Error Domain=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors Code=2 "(null)" Setup verified: iOS physical device, tested after clean install/reboot Tested on more than one physical device Bundle ID: com.elilindenDinematch.Al-Outfits Team ID: FYGW4LHN42 App ID has WeatherKit capability enabled Fresh provisioning profile includes: application-identifier = FYGW4LHN42.com.elilindenDinematch.Al-Outfits com.apple.developer.team-identifier = FYGW4LHN42 com.apple.developer.weatherkit = true Signed app binary entitlements also include com.apple.developer.weatherkit = true codesign -dv confirms TeamIdentifier=FYGW4LHN42 Cleared DerivedData and regenerated/reinstalled with a fresh profile Toggled WeatherKit capability off/on in Developer portal and regenerated profile The failure occurs when calling: let weather = try await WeatherKit.WeatherService.shared.weather(for: location) The request takes a few seconds before failing, which makes it seem like the WeatherKit daemon is reaching Apple’s auth service but being rejected during JWT generation. Has anyone seen WeatherKit entitlement propagation get stuck server-side for a specific Team ID + Bundle ID? Is there anything else I can verify locally, or does this require Apple to inspect the WeatherKit auth service registration for this App ID?

I enabled the WeatherKit capability on my App ID (com.saimcan.darkweather, Team 6SWSD6V4ZC) about 12 hours ago. The entitlement is embedded in the binary and the provisioning profile authorizes it, but every request fails at the JWT generation step. Error from the logs: Error Domain=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors Code=2 "(null)" Relevant log excerpt (iOS 26.4 Simulator, same result on a physical device): [AuthService] Calling process is 3rd party process and has the correct entitlement ... accepting the connection [AuthService] Received proxy request for generating a jwt token. url=https://weatherkit.apple.com [WeatherDataService] Starting to generate JWT token request. bundleIdentifier=com.saimcan.darkweather [AuthService] Signed successfully [WeatherDataService] Make new JWT token request. requestIdentifier=... [AuthService] Failed to generate jwt token ... Code=2 What I have verified: Active Apple Developer Program membership (renewed through April 2027) All agreements accepted WeatherKit capability enabled on the App ID codesign -d --entitlements confirms com.apple.developer.weatherkit in the built binary embedded.mobileprovision also includes com.apple.developer.weatherkit App Group (group.com.saimcan.darkweather.shared) correctly bound to both the app and widget App IDs Since "Signed successfully" is logged, the device-side auth plumbing is working. The rejection appears to be server-side. Could someone from the WeatherKit team check whether JWT minting is enabled for this Team ID / Bundle ID? Team ID: 6SWSD6V4ZC Bundle ID: com.saimcan.darkweather

Looks like the Weather Kit API is not responding. I experience the same with Weather App - API is returning 504 HTTP errors I was wondering if I was alone on this situation In this example: in my app the weather complication is consuming my weather provider which is based on Weather Kit Thank you for your answers. Ilyes

Weatherkit rest api and framework both dont response any request? Is it temporary issue?

Looks like the Weather Kit API is down again. Anybody having the same issue?

Starting yesterday, the API is returning 302 Moved Temporarily" redirecting the API to Location: https://developer.apple.com/weatherkit/ Is this happening for anyone else? This is incorrect, it should be giving an API JSON response as specified by: https://developer.apple.com/documentation/weatherkitrestapi/get-api-v1-weather-_language_-_latitude_-_longitude_

Hey Apple team, I'd love to see a native wind animation layer added to Apple Maps and MapKit. A built-in, system-level wind visualization — similar to the animated weather layers seen in third-party apps — would be an incredibly powerful tool for developers building weather, aviation, marine, outdoor recreation, and navigation apps. Having this baked natively into MapKit would mean smoother performance, better battery efficiency, and a consistent experience across iOS, iPadOS, and macOS — rather than every developer having to reinvent the wheel with custom particle systems or third-party SDKs. Please Apple — this would be a fantastic addition to the Maps ecosystem. 🌬️🗺️

We are operating an application that uses WeatherKit. Despite revoking a specific WeatherKit key on the Apple Developer website, the number of API calls associated with that key continues to increase. We are looking for a way to completely disable this particular key. Any advice or suggestions would be greatly appreciated.

I work on an open source app called Meteorologist (https://sourceforge.net/projects/heat-meteo/). One of the sources the users are allowed to use is Apple's WeatherKit. The app is compiled by me and free to download by anybody. My developer account has the free level of WeatherKit so 500,000 calls/month and every once in a while the app actually hits that limit, shutting that weather source/service down for the app. Is there any way to ask users of the app to somehow get their own account (or already have a developer account) and can register their license so it doesn't all bump up against the one (my) "license"? If so, how would that be passed to WeatherKit? The only thought I have is that they would need to compile the code on their own and sign their own copy. Thanks for any and all feedback and thoughts. Ed

Hello, After being in the AppStore for more than a year with the app working perfectly, yesterday I started seeing that WeatherKit requests failed with Failed to generate jwt token for: com.apple.weatherkit.authservice with error: Error Domain=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors Code=2 "(null)" Encountered an error when fetching weather data subset; location=<+41.40217108,+2.20023642> +/- 0.00m (speed -1.00 mps / course -1.00) @ 13/12/25, 12:20:35 Central European Standard Time, error=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors 2 Error Domain=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors Code=2 "(null)" I checked on developer.apple.com and we still have everything turned on and No changes were made from an already deployed app; and we pay 200$ a month for WeatherKit, this is unacceptable since it's not the first time WeatherKit randomly decides to stop working. More fun facts: the widget works fine...

Hey Im currently trying to use the weatherkit API and Im seeing the following returned: {"reason": "OVER_QUOTA"} Im using the correct service, key and bundle ID. Ive generated a private key too.

I am using the WeatherKit REST API with hourlyStart/hourlyEnd parameters to request up to 240 hours of forecast data. However, when requesting later in the day, the API returns fewer than 240 hourly forecasts — e.g., 239 at 08:00, 238 at 09:00, etc. and goes up to 224 for 23:00 It appears the returned list is contiguous but truncated at the end compared to the full 240-hour window. I have also tried getting the data after sometime, like 09:00 data at 09:45 but still was missing the same data at the end. Is this expected WeatherKit behavior or a bug? If it’s expected, is there documentation explaining how the “forecast horizon” is determined and when it is updated? Thank you.

Hello, I have an app on the App Store built around WeatherKit and it was working fine, up until this morning when I started seeing errors when using the app. When debugging using Xcode I see the familiar error Failed to generate jwt token for: com.apple.weatherkit.authservice with error: Error Domain=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors Code=2 "(null)" which, according to what I've read on the forums looks like an authentication error. Attaching a network debugger to the Simulator, I saw this error: This I have tried: Verify that WeatherKit is enabled on both Capabilities and App Services tabs on the Dev Portal. Toggle on/off this value and regenerate Provisioning Profiles Uninstall/reinstall Checking that I have API available calls. Nothing. If I create a new Bundle ID and sign with that, it works correctly. But this is not an option since that will force all my customers to download everything from scratch. I am getting emails from customers demanding money back and I can't figure out what has happened. The only thing I can think of, is that I started developing an Apple Watch app to complement the iOS app, but that was last week and everything was working fine.

Hey all, Running into an issue with a WeatherKit. Whenever I make a WeatherKit API call, I get this error: Details: { domain: WeatherDaemon.WDSClientErrors, localizedDescription: invalidAuthorization: 401, underlyingError: Unknown, code: 3 } This only happens when calling via the Swift package: swift WeatherService.shared.weather(for: location).currentWeather When I was calling the WeatherKit REST API directly from Dart, everything worked fine. So far I’ve: Enabled WeatherKit in the Apple Developer account Added the WeatherKit capability to the app Refreshed provisioning profiles Installed the app fresh on device/simulator Has anyone seen this specific invalidAuthorization: 401 from WeatherDaemon.WDSClientErrors when using WeatherService in Swift, and know what might be missing or misconfigured?

I have a watch only app that display an open/close park status and the current temperature with a current condition icon. That's it. On second submission the watch app was rejected due to no WeatherKit attribution. I have a lack of clarity of what's needed. With my single view that display my content I don't want WeatherKit attribution to overwhelm what's being presented to the user. I've tried looking for watch apps in the store that provide attribution and I'm not finding any. Looking for advice on how to meet this requirement without attribution overpowering my content.

Hi. The WWDC video of the v2 weatherkit api showed some examples for the REST API. However, they were very limited. The documentation for the REST API is currently for the v1 weatherkit API. When will the documentation for the v2 API be released? There are some new features of the v2 that I would really like to use, but I can't without knowing the new v2 REST API specifications. Any guidance would be much appreciated. Thanks!

Hello Apple Developer Support Team, I am the Account Holder of my Apple Developer Program team (Team ID: T2BKUF6E93). My iOS app is using Swift WeatherKit (WeatherService) on device. Although my environment is completely configured, the system WeatherDaemon consistently fails to generate the WeatherKit JWT token. My environment: Team type: Apple Developer Program (paid) Team ID: T2BKUF6E93 Account role: Account Holder Xcode: latest version Device: iPhone (real device) Provisioning Profile: iOS Team Provisioning Profile (auto-managed) Entitlement: com.apple.developer.weatherkit included WeatherKit Key: created successfully (.p8 downloaded) Bundle ID: correct and WeatherKit capability enabled App reinstalled after each configuration change Device rebooted Even after enabling WeatherKit capability and generating a WeatherKit Key, the system still fails to generate JWT: Failed to generate jwt token for: com.apple.weatherkit.authservice Error Domain=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors Code=2 "(null)" The error persists across: multiple device restarts full clean/rebuild in Xcode deleting and reinstalling the app pulling the latest provisioning profiles waiting more than several hours for backend propagation What I suspect My WeatherKit entitlement and/or WeatherKit Key may not be fully propagated to the provisioning server or WeatherDaemon backend, even though everything appears correctly configured on the Developer Center. I kindly request the support team to: Verify whether the WeatherKit Entitlement is correctly attached to my app ID and provisioning profile. Verify whether my WeatherKit Key is properly registered and propagated for my team. Check if there are any backend propagation delays or stuck states for my Team ID (T2BKUF6E93). Confirm whether WeatherDaemon has permission to generate JWT for my app. Thank you Please let me know if any logs, screenshots, or provisioning profile identifiers are needed. Thank you for your help! Best regards, Jiangyang

Are the apple weather precipitation radars available through the rest API or have I hit a brickwall. Would love to have the visuals of the native overlays in my app, cant find an affordable/comparable API. Any help would be appreciated. I really need the smooth hourly scrubbing. Not keen on rendering my own with vectors yet. Thank you.

My code was running with with the version before Xcode 26 RC. I recompiled one last time. Now I'm getting the error: A server with the specified hostname could not be found let now = Calendar.current.date(byAdding: .hour, value: 1, to: Date())! let nextWeek = Calendar.current.date(byAdding: .day, value: 14, to: Date())! do { let (dailyForecast, hourlyForecast, currentWeather, alertWeather) = try await weatherService.weather(for: thisLocation, including: .daily, .hourly(startDate: now, endDate: nextWeek), .current, .alerts) Suggestions?

How can we subscribe to over 200 million api calls per month? from WeatherKit api documentation, the max is 200m calls/month