I'm experiencing the following error with my SwiftData container when running a build: Code=134504 "Cannot use staged migration with an unknown model version." Code Structure - Summary I am using a versionedSchema to store multiple models in SwiftData. I started experiencing this issue when adding two new models in the newest Schema version. Starting from the current public version, V4.4.6, there are two migrations. Migration Summary The first migration is to V4.4.7. This is a lightweight migration removing one attribute from one of the models. This was tested and worked successfully. The second migration is to V5.0.0. This is a custom migration adding two new models, and instantiating instances of the two new models based on data from instances of the existing models. In the initial testing of this version, no issues were observed. Issue and Steps to Reproduce Reproduction of issue: Starting from a fresh build of the publicly released V4.4.6, I run a new build that contains both Schema Versions (V4.4.7 and V5.0.0), and their associated migration stages. This builds successfully, and the container successfully migrates to V5.0.0. Checking the default.store file, all values appear to migrate and instantiate correctly. The second step in reproduction of the issue is to simply stop running the build, and then rebuild, without any code changes. This fails to initialize the model container every time afterwards. Going back to the simulator after successive builds are stopped in Xcode, the app launches and accesses/modifies the model container as normal. Supplementary Issue: I have been putting up with the same, persistent issue in the Xcode Preview Canvas of "Failed to Initialize Model Container" This is a 5 in 6 build issue, where builds will work at random. In the case of previews, I have cleared all data associated with all previews multiple times. The only difference being that the simulator is a 100% failure rate after the initial, successful initialization. I assume this is due to the different build structure of previews. Lastly, of note, the Xcode previews fail at the same line in instantiating the model container as the simulator does. From my research into this issue, people say that the Xcode preview is instantiating from elsewhere. I do have a separate model container set up specifically for canvas previews, but the error does not occur in that container, but rather the app's main container. Possible Contributing Factors & Tested Facts iOS: While I have experienced issues with SwiftData and the complier in iOS 26, I can rule that out as the issue here. This has been tested on simulators running iOS 18.6, 26.0.1, and 26.1, all encountering failures to initialize model container. While in iOS 18, subsequent builds after the successful migration did work, I did eventually encounter the same error and crash. In iOS 26.0.1 and 26.1, these errors come immediately on the second build. Container Initialization for V4.4.6 do { container = try ModelContainer( for: Job.self, JobTask.self, Day.self, Charge.self, Material.self, Person.self, TaskCategory.self, Service.self, migrationPlan: JobifyMigrationPlan.self ) } catch { fatalError("Failed to Initialize Model Container") } Versioned Schema Instance for V4.4.6 (V4.4.7 differs only by versionIdentifier) static var versionIdentifier = Schema.Version(4, 4, 6) static var models: [any PersistentModel.Type] { [Job.self, JobTask.self, Day.self, Charge.self, Material.self, Person.self, TaskCategory.self, Service.self] } Container Initialization for V5.0.0 do { let schema = Schema([Jobify.self, JobTask.self, Day.self, Charge.self, MaterialItem.self, Person.self, TaskCategory.self, Service.self, ServiceJob.self, RecurerRule.self]) container = try ModelContainer( for: schema, migrationPlan: JobifyMigrationPlan.self ) } catch { fatalError("Failed to Initialize Model Container") } Versioned Schema Instance for V5.0.0 static var versionIdentifier = Schema.Version(5, 0, 0) static var models: [any PersistentModel.Type] { [ JobifySchemaV500.Job.self, JobifySchemaV500.JobTask.self, JobifySchemaV500.Day.self, JobifySchemaV500.Charge.self, JobifySchemaV500.Material.self, JobifySchemaV500.Person.self, JobifySchemaV500.TaskCategory.self, JobifySchemaV500.Service.self, JobifySchemaV500.ServiceJob.self, JobifySchemaV500.RecurerRule.self ] } Addressing Differences in Object Names Type-aliasing: All my model types are type-aliased for simplification in view components. All types are aliased as 'JobifySchemeV446.<#Name#>' in V.4.4.6, and 'JobifySchemaV500.<#Name#>' in V5.0.0 Issues with iOS 26: My type-aliases dating back to iOS 17 overlapped with lower level objects in Swift, including 'Job' and 'Material'. These started to be an issue with initializing the model container when running in iOS 26. The type aliases have been renamed since, however the V4.4.6 build with the old names runs and builds perfectly fine in iOS 26 If there is any other code that may be relevant in determining where this error is occurring, I would be happy to add it. My current best theory is simply that I have mistakenly omitted code relevant to the SwiftData Migration.

We are currently implementing a custom iCloud sync for our macOS and iOS apps using CloudKit. Syncing works fine as long as the number of record sends is relatively small. But when we test with a large number of changes ( 80,000+ CKRecords ) we start running into problems. Our sending strategy is very conservative to avoid rate limits: We send records sequentially in batches of 250 records With about 2 seconds pause between operations Records are small and contain no assets (assets are uploaded separately) At some point we start receiving: “Database commit size exceeds limit” After that, CloudKit begins returning rate-limit errors with retryAfter-Information in the error. We wait for the retry time and try again, but from this moment on, nothing progresses anymore. Every subsequent attempt fails. We could not find anything in the official documentation regarding such a “commit size” limit or what triggers this failure state. So my questions are: Are there undocumented limits on the total number of records that can exist in an iCloud database (private or shared)? Is there a maximum volume of record modifications a container can accept within a certain timeframe, even if operations are split into small batches with pauses? Is it possible that sending large numbers of records in a row can temporarily or permanently “stall” a CloudKit container? Any insights or experiences would be greatly appreciated. Thank you!

I'm working on a macOS app with a Safari web extension. I'm trying to share a SwiftData model between devices using CloudKit synchronization. I am able to get synchronization in the main app on the same device, CloudKit sync works correctly — changes appear in the CloudKit Dashboard under com.apple.coredata.cloudkit.zone. However, in the Safari App Extension, data is saved locally and persists across launches, but never syncs to CloudKit. I have followed the recommended practices for configuring the App Group and entitlements, but the issue persists. Questions: Is there an official limitation preventing Safari App Extensions from connecting to the CloudKit daemon (cloudd)? If not, what entitlements or configuration changes are required for a Safari App Extension to successfully sync with CloudKit? Is the xpc_error=159 from bootstrap_look_up() a known sandbox restriction for this extension type? Any guidance from Apple engineers or others who have successfully used CloudKit from a Safari App Extension would be appreciated. What I’ve confirmed: The extension’s .entitlements includes: com.apple.security.app-sandbox com.apple.developer.icloud-services CloudKit com.apple.developer.icloud-container-identifiers iCloud.dev.example.myapp Same iCloud container ID for both app and extension CloudKit container exists and is initialized in CloudKit Console Running in :Sandbox environment during development Database name in SwiftData matches container identifier (without the iCloud. prefix) The extension’s codesign output shows correct entitlements App Group is configured (although in this case, extension and app use separate stores intentionally) Observed behavior in Console.app logs: CloudKit sync engine initializes in the extension XPC activities are registered for import/export: _xpc_activity_register: com.apple.coredata.cloudkit.activity.export. xpc_activity_set_criteria: ... import. Then a bootstrap lookup fails: failed to do a bootstrap look-up: xpc_error=[159: Unknown error: 159] CloudKit daemon connection error: CKErrorDomain Code=6 "Error connecting to CloudKit daemon" NSCocoaErrorDomain Code=4099 There is no “Will attempt to upload transactions” or “Upload succeeded” logs are ever seen. Symptoms When the extension is run, I see logs like the following in Console.app: [0x13e215820] failed to do a bootstrap look-up: xpc_error=[159: Unknown error: 159] CoreData+CloudKit: -[PFCloudKitSetupAssistant _checkAccountStatus:]_block_invoke(342): Fetched account info for store : (null) Error Domain=CKErrorDomain Code=6 "Error connecting to CloudKit daemon. This could happen for many reasons..."

I'm trying to use the new (in tvOS 26) video streaming service automatic login API from the VideoSubscriberAccount framework: https://developer.apple.com/documentation/videosubscriberaccount/vsuseraccountmanager/autosignintoken-swift.property It seems that this API requires an entitlement. This document suggests that the com.apple.smoot.subscriptionservice entitlement is required. https://developer.apple.com/documentation/videosubscriberaccount/signing-people-in-to-media-apps-automatically However, it seems more likely that com.apple.developer.video-subscriber-single-sign-on is the correct entitlement. https://developer.apple.com/documentation/bundleresources/entitlements/com.apple.developer.video-subscriber-single-sign-on Which is the correct entitlement and how do I obtain it? I don't want to fully comply with the video partner program. https://developer.apple.com/programs/video-partner/ I just want to use this one new automatic login feature.

I've run into a strange issue. If a sheet loads a view that has a SwiftData @Query, and there is an if statement in the view body, I get the following error when running an iOS targetted SwiftUI app under MacOS 26.1: Set a .modelContext in view's environment to use Query While the view actually ends up loading the correct data, before it does, it ends up re-creating the sqlite store (opening as /dev/null). The strange thing is that this only happens if there is an if statement in the body. The statement need not ever evaluate true, but it causes the issue. Here's an example. It's based on the default xcode new iOS project w/ SwiftData: struct ContentView: View { @State private var isShowingSheet = false var body: some View { Button(action: { isShowingSheet.toggle() }) { Text("Show Sheet") } .sheet(isPresented: $isShowingSheet, onDismiss: didDismiss) { VStack { ContentSheetView() } } } func didDismiss() { } } struct ContentSheetView: View { @Environment(\.modelContext) private var modelContext @Query public var items: [Item] @State var fault: Bool = false var body: some View { VStack { if fault { Text("Fault!") } Button(action: addItem) { Label("Add Item", systemImage: "plus") } List { ForEach(items) { item in Text(item.timestamp, format: Date.FormatStyle(date: .numeric, time: .standard)) } } } } private func addItem() { withAnimation { let newItem = Item(timestamp: Date()) modelContext.insert(newItem) } } } It requires some data to be added to trigger, but after adding it and dismissing the sheet, opening up the sheet with trigger the Set a .modelContext in view's environment to use Query. Flipping on -com.apple.CoreData.SQLDebug 1 will show it trying to recreate the database. If you remove the if fault { Text("Fault!") } line, it goes away. It also doesn't appear to happen on iPhones or in the iPhone simulator. Explicitly passing modelContext to the ContentSheetView like ContentSheetView().modelContext(modelContext) also seems to fix it. Is this behavior expected?

I'm experiencing a critical issue with SwiftData custom migrations where objects created during migration appear to be inserted successfully but aren't persisted or found by queries after migration completes. The migration logs show objects being created, but subsequent queries return zero results. I'm migrating from schema version V2 to V2_5, which involves: Renaming Person class to GroupData Keeping the same data structure but changing the class name while keeping the old class. Using a custom migration stage to copy data from old to new schema Below is an extract of my two schema and migration plan: Environment: Xcode 16.0, iOS 18.0, Swift 6.0 SchemaV2 enum LinkMapV2: VersionedSchema { static let versionIdentifier: Schema.Version = .init(2, 0, 0) static var models: [any PersistentModel.Type] { [AnnotationData.self, Person.self, History.self] } @Model final class Person { @Attribute(.unique) var id: UUID var name: String var photo: String var requirement: String var statue: Bool var annotationId: UUID? var number: Int = 0 init(id: UUID = UUID(), name: String = "", photo: String = "", requirement: String = "", status: Bool = false, annotationId: UUID? = nil, number: Int = 0) { self.id = id self.name = name self.photo = photo self.requirement = requirement self.statue = status self.annotationId = annotationId self.number = number } } } Schema V2_5 static let versionIdentifier: Schema.Version = .init(2, 5, 0) static var models: [any PersistentModel.Type] { [AnnotationData.self, Person.self, GroupData.self, History.self] } // Keep the old Person model for migration @Model final class Person { @Attribute(.unique) var id: UUID var name: String var photo: String var requirement: String var statue: Bool var annotationId: UUID? var number: Int = 0 init(id: UUID = UUID(), name: String = "", photo: String = "", requirement: String = "", status: Bool = false, annotationId: UUID? = nil, number: Int = 0) { self.id = id self.name = name self.photo = photo self.requirement = requirement self.statue = status self.annotationId = annotationId self.number = number } } // Add the new GroupData model that mirrors Person @Model final class GroupData { @Attribute(.unique) var id: UUID var name: String var photo: String var requirement: String var status: Bool var annotationId: UUID? var number: Int = 0 init(id: UUID = UUID(), name: String = "", photo: String = "", requirement: String = "", status: Bool = false, annotationId: UUID? = nil, number: Int = 0) { self.id = id self.name = name self.photo = photo self.requirement = requirement self.status = status self.annotationId = annotationId self.number = number } } } Migration Plan static let migrationV2toV2_5 = MigrationStage.custom( fromVersion: LinkMapV2.self, toVersion: LinkMapV2_5.self, willMigrate: { context in do { let persons = try context.fetch(FetchDescriptor<LinkMapV2.Person>()) print("=== MIGRATION STARTED ===") print("Found \(persons.count) Person objects to migrate") guard !persons.isEmpty else { print("No Person data requires migration") return } for person in persons { print("Migrating Person: '\(person.name)' with ID: \(person.id)") let newGroup = LinkMapV2_5.GroupData( id: person.id, // Keep the same ID name: person.name, photo: person.photo, requirement: person.requirement, status: person.statue, annotationId: person.annotationId, number: person.number ) context.insert(newGroup) print("Inserted new GroupData: '\(newGroup.name)'") // Don't delete the old Person yet to avoid issues // context.delete(person) } try context.save() print("=== MIGRATION COMPLETED ===") print("Successfully migrated \(persons.count) Person objects to GroupData") } catch { print("=== MIGRATION ERROR ===") print("Migration failed with error: \(error)") } }, didMigrate: { context in do { // Verify migration in didMigrate phase let groups = try context.fetch(FetchDescriptor<LinkMapV2_5.GroupData>()) let oldPersons = try context.fetch(FetchDescriptor<LinkMapV2_5.Person>()) print("=== MIGRATION VERIFICATION ===") print("New GroupData count: \(groups.count)") print("Remaining Person count: \(oldPersons.count)") // Now delete the old Person objects for person in oldPersons { context.delete(person) } if !oldPersons.isEmpty { try context.save() print("Cleaned up \(oldPersons.count) old Person objects") } // Print all migrated groups for debugging for group in groups { print("Migrated Group: '\(group.name)', Status: \(group.status), Number: \(group.number)") } } catch { print("Migration verification error: \(error)") } } ) And I've attached console output below: Console Output

In a document based SwiftData app for macOS, how do you go about opening a (modal) child window connected to the ModelContainer of the currently open document? Using .sheet() does not really result in a good UX, as the appearing view lacks the standard window toolbar. Using a separate WindowGroup with an argument would achieve the desired UX. However, as WindowGroup arguments need to be Hashable and Codable, there is no way to pass a ModelContainer or a ModelContext there: WindowGroup(id: "myWindowGroup", for: MyWindowGroupArguments.self) { $args in ViewThatOpensInAWindow(args: args) } Is there any other way?

Environment visionOS 26 Xcode 26 Issue I am experiencing crash when trying to access a [String] from a @Model data, after dismissing an immersiveSpace and opening a WindowGroup. This crash only occurs when trying to access the [String] property of my Model. It works fine with other properties. Thread 1: Fatal error: This backing data was detached from a context without resolving attribute faults: PersistentIdentifier(...) Steps to Reproduce Open WindowGroup Dismiss window, open ImmersiveSpace Dismiss ImmersiveSpace, reopen WindowGroup Any guidance would be appreciated! @main struct MyApp: App { var body: some Scene { WindowGroup(id: "main") { ContentView() } .modelContainer(for: [Item.self]) ImmersiveSpace(id: "immersive") { ImmersiveView() } } } // In SwiftData model @Model class Item { var title: String = "" // Accessing this property works fine var tags: [String] = [] @storageRestrictions(accesses: _$backingData, initializes: _tags) init(initialValue) { _$backingData.setValue(forKey: \. tags, to: initialValue) _tags =_ SwiftDataNoType() } get { _$observationRegistrar.access(self, keyPath: \.tags) **return self getValue(forkey: \.tags)** // Crashes here }

I have started from here: Apple's guide on the sharing core data objects between iCloud users and I have created a sample project that has Collections and Items. Everything works great while I stay on Swift 5, like with the initial project. I would like to migrate to Swift 6 (Default Actor Isolaton @MainActor, Approachable Concurrency: Yes) on the project and I am stuck at extension CDCollection: Transferable { ... }. When compiling with Swift 5, there is a warning: Conformance of 'NSManagedObject' to 'Sendable' is unavailable in iOS; this is an error in the Swift 6 language mode. After resolving almost all compile-time warnings I'm left with: Conformance of 'CDCollection' to protocol 'Transferable' crosses into main actor-isolated code and can cause data races. Which I don't think will work, because of the warning shown above. It can be worked around like: nonisolated extension CDCollection: Transferable, @unchecked Sendable Then there are errors: let persistentContainer = PersistenceController.shared.persistentContainer Main actor-isolated static property 'shared' can not be referenced from a nonisolated context. I've created the following class to have a Sendable object: struct CDCollectionTransferable: Transferable { var objectID: NSManagedObjectID var persistentContainer: NSPersistentCloudKitContainer public static var transferRepresentation: some TransferRepresentation { CKShareTransferRepresentation { collectionToExport in let persistentContainer = collectionToExport.persistentContainer let ckContainer = CloudKitProvider.container var collectionShare: CKShare? if let shareSet = try? persistentContainer.fetchShares( matching: [collectionToExport.objectID]), let (_, share) = shareSet.first { collectionShare = share } /** Return the existing share if the collection already has a share. */ if let share = collectionShare { return .existing(share, container: ckContainer) } /** Otherwise, create a new share for the collection and return it. Use uriRepresentation of the object in the Sendable closure. */ let collectionURI = collectionToExport.objectID .uriRepresentation() return .prepareShare(container: ckContainer) { let collection = await persistentContainer.viewContext .perform { let coordinator = persistentContainer.viewContext .persistentStoreCoordinator guard let objectID = coordinator?.managedObjectID( forURIRepresentation: collectionURI ) else { fatalError( "Failed to return the managed objectID for: \(collectionURI)." ) } return persistentContainer.viewContext.object( with: objectID ) } let (_, share, _) = try await persistentContainer.share( [collection], to: nil ) return share } } } } And I'm able to compile and run the app with this change: let transferable = CDCollectionTransferable( objectID: collection.objectID, persistentContainer: PersistenceController.shared .persistentContainer ) ToolbarItem { ShareLink( item: transferable, preview: SharePreview("Share \(collection.name)!") ) { MenuButtonLabel( title: "New Share", systemImage: "square.and.arrow.up" ) } } The app crashes when launched with libdispatch.dylib`_dispatch_assert_queue_fail: 0x1052c6ea4 <+0>: sub sp, sp, #0x50 0x1052c6ea8 <+4>: stp x20, x19, [sp, #0x30] 0x1052c6eac <+8>: stp x29, x30, [sp, #0x40] 0x1052c6eb0 <+12>: add x29, sp, #0x40 0x1052c6eb4 <+16>: adrp x8, 63 0x1052c6eb8 <+20>: add x8, x8, #0xa0c ; "not " 0x1052c6ebc <+24>: adrp x9, 62 0x1052c6ec0 <+28>: add x9, x9, #0x1e5 ; "" 0x1052c6ec4 <+32>: stur xzr, [x29, #-0x18] 0x1052c6ec8 <+36>: cmp w1, #0x0 0x1052c6ecc <+40>: csel x8, x9, x8, ne 0x1052c6ed0 <+44>: ldr x10, [x0, #0x48] 0x1052c6ed4 <+48>: cmp x10, #0x0 0x1052c6ed8 <+52>: csel x9, x9, x10, eq 0x1052c6edc <+56>: stp x9, x0, [sp, #0x10] 0x1052c6ee0 <+60>: adrp x9, 63 0x1052c6ee4 <+64>: add x9, x9, #0x9db ; "BUG IN CLIENT OF LIBDISPATCH: Assertion failed: " 0x1052c6ee8 <+68>: stp x9, x8, [sp] 0x1052c6eec <+72>: adrp x1, 63 0x1052c6ef0 <+76>: add x1, x1, #0x9a6 ; "%sBlock was %sexpected to execute on queue [%s (%p)]" 0x1052c6ef4 <+80>: sub x0, x29, #0x18 0x1052c6ef8 <+84>: bl 0x105301b18 ; symbol stub for: asprintf 0x1052c6efc <+88>: ldur x19, [x29, #-0x18] 0x1052c6f00 <+92>: str x19, [sp] 0x1052c6f04 <+96>: adrp x0, 63 0x1052c6f08 <+100>: add x0, x0, #0xa11 ; "%s" 0x1052c6f0c <+104>: bl 0x1052f9ef8 ; _dispatch_log 0x1052c6f10 <+108>: adrp x8, 95 0x1052c6f14 <+112>: str x19, [x8, #0x1f0] -> 0x1052c6f18 <+116>: brk #0x1 The app still crashes when I comment this code, and all Core Data related warnings. I'm quite stuck now as I want to use Swift 6. Has anyone figured CloudKit, CoreData and Swift 6 for sharing between users?

My app uses iCloud to let users sync their files via their private iCloud Drive, which does not use CloudKit. FileManager.default.url(forUbiquityContainerIdentifier: nil)?.appending(component: "Documents") I plan to transfer my app to another developer account, but I'm afraid it will affect the access of the app to the existing files in that folder. Apple documentation doesn't mention this case. Has anyone done this before and can confirm if the app will continue to work normally after transferring? Thanks

The stuff I've found by searching has confused me, so hopefully someone can help simplify it for me? I have an app (I use it for logging which books I've given away), and I could either add a bunch of things to the app, or I could have another app (possibly a CLI tool) to generate some reports I'd like.

Hi everyone, I am experiencing an iCloud provisioning problem I cannot resolve, and Developer Support has not been able to help. My App ID: com.exaqservices.ArkyvTiles Symptoms: 1. In Xcode (v16.2), enabling iCloud in Signing & Capabilities repeatedly fails with: The app ID does not include the iCloud container. Click Try Again. Clicking Try Again does nothing. The error persists forever. 2. In Certificates, Identifiers & Profiles: • The iCloud capability is enabled for this App ID. • The CloudKit container is selected. • But the portal no longer shows the “iCloud Documents” checkbox, which used to be required for ubiquitous document support. 3. Xcode cannot regenerate provisioning profiles because it claims the App ID is missing the iCloud container — even though the container is attached. 4. Provisioning profiles on the Apple Developer site all appear expired, and new ones do not generate correctly. 5. The App Store Connect interface also does not show an iCloud Services section under App Information → Capabilities as older guides describe. Expected Behavior: Since iCloud and the CloudKit container are enabled on the App ID, Xcode should successfully enable: • com.apple.developer.icloud-services • com.apple.developer.icloud-container-identifiers • com.apple.developer.ubiquity-container-identifiers (if needed) • com.apple.developer.ubiquity-kvstore-identifier Instead, the entitlements never propagate. What I suspect: This seems like an App ID metadata mismatch or a stale backend entry where: • the CloudKit container is attached but the entitlement isn’t linked, • the “iCloud Documents” flag is missing due to a UI transition, • provisioning profiles cannot be regenerated because the App ID is not updating correctly. What I need help with: Can someone from Apple engineering confirm: • Whether my App ID metadata is corrupted, • If entitlements need to be manually refreshed, • Or if the “iCloud Documents” toggle has moved or is no longer exposed? This is blocking development completely — I cannot build, sign, or deploy the app with iCloud. Thank you! Alan Metzger

My Code: let op = CKModifyRecordsOperation(recordIDsToDelete:recordIDsToDelete) op.modifyRecordsCompletionBlock = { _, deleteRecordIDs, error in if error == nil { print("successful delete deleteRecordIDS = \(deleteRecordIDs)") } else { print("delete error = \(error?.localizedDescription)") } } op.database = CKContainer.default().privateCloudDatabase op.qualityOfService = .userInitiated CKContainer.default().privateCloudDatabase.add(op) My problem is that CKRecord are not deleted once I reinstall the app: when I reinstall the app and try to delete a CloudKit record, the method is executed successfully (error is nil) but the records are still in CloudKit Dashboards.

I have developed an podcast app, where subscriped podcast & episodes synched with iCloud. So its working fine with iOS & iPad with latest os version, but iCloud not synching in iPod with version 15. Please help me to fix this. Thanks Devendra K.

After Xcode 26.1 was updated and installing the OS 26.1 simulators, my app started crashing related to transformable properties. When I checked my schema, I noticed that properties with array collection types are suddenly set with an option transformable with Optional("NSSecureUnarchiveFromData")], even though I do not use any transformable types. I verified the macros, no transformable was specified. This is causing ModelCoders to encode/decode my properties incorrectly. This is not an issue when I switch back to OS 26.0 simulators.

I’m seeing an issue with CloudKit sharing in iOS 26.2.1: When I call CKShare(rootRecord:) with a brand-new record in a fresh custom zone, the share is created with no root attached (rootFromShare == nil). After saving both the root and share in a single CKModifyRecordsOperation, fetching the share from the server still shows no root reference (rootRecordID == nil). No errors are thrown, but sharing simply fails. Key facts: • Custom zone created and confirmed (sharing enabled, capsRaw=7/15) • Brand-new record type and fresh IDs each run • Never reusing records or shares • Saving both root and share together in one operation • No default zone usage; always custom private zone Tested: • Multiple devices, iCloud accounts, and app versions • Both simulator and physical device Debug logs consistently show: • SHARE_CREATE_SHARE_LOCAL ... rootFromShare=nil • After save/fetch: rootRecordID=nil on server Has anyone seen this? Is there a new CloudKit regression in iOS 26.x, or am I missing something subtle? Minimal sample project and full debug logs available if needed. Any insights or workarounds would be hugely appreciated!

I have several macOS applications that use CloudKit. I need to test and finds out what happens when the user signs out of their iCloud account. That's because the application may lose data after signing out and then signing in again. Every time I do that, it'll take 15, 20 minutes... I don't time it, but it takes quite a gigantic time to sign out as the spinner keeps rolling. Why does it take so long to just sign out? This sign out effect is untestable because it takes a long time to sign out of an iCloud account and then make changes to the code and then test again. In case you need to know, my system version is Sequoia 15.7.

Hi, I’m completely stuck with a very strange CloudKit problem that started recently and has now killed all iCloud sync for a live production app. What is happening Production container: iCloud.gainzCloud (created ~11 months ago, has been working perfectly until now) In Xcode 26.0 (17A321): → Signing & Capabilities → iCloud is enabled → Container correctly shows as iCloud.gainzCloud → App builds and runs on device/simulator with zero provisioning or container errors CloudKit Dashboard (https://icloud.developer.apple.com/dashboard/): completely blank – “No containers found” Result: CloudKit sync is dead for every user (development + production environments) What I know for sure Apple Developer Support confirmed the container iCloud.gainzCloud still exists and is correctly attached to my Team ID on their backend Personal iCloud (Mail, Notes, Photos, etc.) syncs perfectly on the same Mac / same Apple ID under macOS Tahoe 26.1 I have NOT changed the password on either the Apple ID or the Developer Program account New containers I create appear in Xcode but never show up in the Dashboard Environment macOS Tahoe 26.1 (latest) Xcode Version 26.0 (17A321) Has anyone on the new Tahoe/Xcode 26 releases seen the CloudKit Dashboard suddenly go completely empty while Xcode still “sees” the container just fine? Any known trick to force the dashboard to re-index containers or clear whatever cache is broken? Thanks a lot in advance – this is blocking all iCloud functionality for a released app with active users.

Greetings my fellow engineers, I use SwiftData in my iOS app. The schema is unversioned and consists of a single model. I've been modifying the model for almost two years now and relying on automatic database migrations. I had no problems for all that time, but now trying to add a property to the model or even remove a property from the model results in an error which seems like SwiftData is no longer capable of performing an automatic migration. The log console has things like the following: CoreData: error: NSUnderlyingError : Error Domain=NSCocoaErrorDomain Code=134190 "(null)" UserInfo={reason=Each property must have a unique renaming identifier} CoreData: error: reason : Can't find or automatically infer mapping model for migration CoreData: error: storeType: SQLite CoreData: error: configuration: default CoreData: annotation: options: CoreData: annotation: NSMigratePersistentStoresAutomaticallyOption : 1 CoreData: annotation: NSInferMappingModelAutomaticallyOption : 1 CoreData: annotation: NSPersistentStoreRemoteChangeNotificationOptionKey : 1 CoreData: annotation: NSPersistentHistoryTrackingKey : 1 CoreData: error: <NSPersistentStoreCoordinator: 0x7547b5480>: Attempting recovery from error encountered during addPersistentStore: 0x753f8d800 Error Domain=NSCocoaErrorDomain Code=134140 "Persistent store migration failed, missing mapping model." Have you ever encountered such an issue? What are my options?

I'm building a photo editing app with a token-based subscription system using RevenueCat and StoreKit. Users purchase subscriptions that grant tokens for AI generations. There are no user accounts, the app is fully anonymous. Currently, I generate an anonymous account ID via RevenueCat SDK and store it in iCloud Keychain. This allows users on the same iCloud account to restore both their subscription and token balance across devices. However, users on a different iCloud account can restore their subscription via Apple, but their token balance is lost because there's no way to link the anonymous IDs. The problem is that if a user switches iCloud accounts or gets a new device without the same iCloud, their purchased tokens are orphaned. The subscription restores fine through Apple, but the token balance tied to the old anonymous ID becomes inaccessible. I have a few constraints: no user accounts, no email or phone sign-in, must work across devices owned by the same person, and must comply with App Store guidelines. My questions are: Is iCloud Keychain the right tool for this, or is there a better approach? Would CloudKit with an anonymous record zone be more appropriate? Are there any recommended patterns for persisting consumable balances tied to anonymous users across device migrations? Any guidance would be appreciated.