After Apple-to-Apple pairing is completed, the paired device will be recorded in “Settings → Privacy & Security → Paired Devices”. However, after Android-to-Apple pairing is completed, the device is not saved to this list. Android device can be normally displayed on the Apple official Wi-Fi Aware Sample. However, the indicator is not green. During pairing, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingSetupSucceeded. During pairing verification, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingVerificationSucceed. My iPhone is iPhone 13， iOS 26.0 （23A5287g）

Hi everyone, I'm currently experimenting with building a simple DNS filter using Apple's Packet Tunnel framework. Here's the flow I'm trying to implement: Create a TUN interface Set up a UDP socket Read packets via packetFlow.readPackets Parse the raw IP packet Forward the UDP payload through the socket Receive the response from the server Reconstruct the IP packet with the response Write it back to the TUN interface using packetFlow.writePackets Here’s an example of an intercepted IP packet (DNS request): 45 00 00 3c 15 c4 00 00 40 11 93 d1 c0 a8 00 64 08 08 08 08 ed 6e 00 35 00 28 e5 c9 7f da 01 00 00 01 00 00 00 00 00 00 04 74 69 6d 65 05 61 70 70 6c 65 03 63 6f 6d 00 00 01 00 01 And here’s the IP packet I tried writing back into the TUN interface (DNS response): 45 00 00 89 5e 37 40 00 40 11 0b 11 08 08 08 08 c0 a8 00 64 00 35 ed 6e 00 75 91 e8 7f da 81 80 00 01 00 04 00 00 00 00 04 74 69 6d 65 05 61 70 70 6c 65 03 63 6f 6d 00 00 01 00 01 c0 0c 00 05 00 01 00 00 0c fb 00 11 04 74 69 6d 65 01 67 07 61 61 70 6c 69 6d 67 c0 17 c0 2c 00 01 00 01 00 00 03 04 00 04 11 fd 74 fd c0 2c 00 01 00 01 00 00 03 04 00 04 11 fd 74 7d c0 2c 00 01 00 01 00 00 03 04 00 04 11 fd 54 fb Unfortunately, it seems the packet is not being written back correctly to the TUN interface. I'm not seeing any expected DNS response behavior on the device. Also, I noticed that after creating the TUN, the interface address shows up as 0.0.0.0:0 in Xcode. The system log includes this message when connecting the VPN: NWPath does not have valid interface: satisfied (Path is satisfied), interface: utun20[endc_sub6], ipv4, dns, expensive, uses cellular Does anyone know how to properly initialize the TUN so that the system recognizes it with a valid IP configuration? Or why my written-back packet might be getting ignored? Any help would be appreciated!

Question: What is the standard, most reliable way to manage temporary files associated with a URLSessionDownloadTask that has been terminated abnormally due to a network error or other issues? Details Hello, I'm currently developing a feature to download multiple files concurrently on iOS using URLSessionDownloadTask, and I have a question regarding the lifecycle of the temporary files created during this process. As I understand it, URLSessionDownloadTask stores incoming data in a temporary file within the tmp directory, typically with a name like CFNetworkDownload_*.tmp. In my testing, temporary files are managed correctly in the normal scenario. For instance, when I call the cancel() method on an active downloadTask and then release all references to it, the corresponding temporary file is automatically cleaned up from the tmp directory shortly after. However, the problem occurs when a download is interrupted abnormally due to external factors, such as a lost network connection. In this situation, the urlSession(_:task:didCompleteWithError:) delegate method is called, but the associated temporary file is not deleted and remains in the tmp directory. I've observed a particularly interesting behavior related to this. Immediately after the error occurs, if I check my app's storage usage in the iOS Settings app, the data size appears to have decreased momentarily. However, the tmp file has not actually been deleted, and after a short while, the storage usage is recalculated to include the size of this orphaned temporary file. Since my app does not support resuming interrupted downloads, these leftover files become orphaned and unnecessarily consume storage. Therefore, I want to ensure they are all reliably deleted. With this context, I'd like to ask the community: What is the standard, most reliable way to manage temporary files associated with a URLSessionDownloadTask that has been terminated abnormally due to a network error or other issues? I am wondering if there is an official guide or a framework-level API to handle these orphaned files. I would appreciate any advice from those with experience in this area. Thank you.

We have a Java application built for macOS. On the first launch, the application prompts the user to allow local network access. We've correctly added the NSLocalNetworkUsageDescription key to the Info.plist, and the provided description appears in the system prompt. After the user grants permission, the application can successfully connect to a local server using its hostname. However, the issue arises after the system is rebooted. When the application is launched again, macOS does not prompt for local network access a second time—which is expected, as the permission was already granted. Despite this, the application is unable to connect to the local server. It appears the previously granted permission is being ignored after a reboot. A temporary workaround is to manually toggle the Local Network permission off and back on via System Settings > Privacy & Security, which restores connectivity—until the next reboot. This behavior is highly disruptive, both for us and for a significant number of our users. We can reproduce this on multiple systems... The issues started from macOS Sequoia 15.0 By opening the application bundle using "Show Package Contents," we can launch the application via "JavaAppLauncher" without any issues. Once started, the application is able to connect to our server over the local network. This seems to bypass the granted permissions? "JavaAppLauncher" is also been used in our Info.plist file Removing the following plist in Recovery Mode seems to resolve the issue rm "/Volumes/Macintosh HD/Library/Preferences/com.apple.networkextension.plist" Is this safe to do?

We are developing an iOS application with a key feature designed to enhance user safety: real-time assessment of Wi-Fi network security. The "Safe Wi-Fi" feature aims to inform users about the security level of the Wi-Fi network they are currently connected to. Our goal is to provide this information seamlessly and continuously, even when the user isn't actively using the app. Currently, we've implemented this feature using a NWPathMonitor. The limitation of NWPathMonitor is that it doesn't function when the app is in a kill state. We are looking for guidance on how to achieve persistent Wi-Fi security monitoring in the background or when the app is killed. Is there any API (Public, Special API, etc) or a recommended approach that allows for real-time Wi-Fi connection monitoring (including connection changes and network details) even when the app is not actively running or is in a kill state. Thank you in advance for your help.

我的完整报错信息： Task <0568A3A0-A40C-42A8-9491-2FC52D71EFFF>.<4> finished with error [-1009] Error Domain=NSURLErrorDomain Code=-1009 "似乎已断开与互联网的连接。" UserInfo={_kCFStreamErrorCodeKey=50, NSUnderlyingError=0x107db5590 {Error Domain=kCFErrorDomainCFNetwork Code=-1009 "(null)" UserInfo={_kCFStreamErrorDomainKey=1, _kCFStreamErrorCodeKey=50, _NSURLErrorNWResolutionReportKey=Resolved 0 endpoints in 1ms using unknown from cache, _NSURLErrorNWPathKey=unsatisfied (Denied over Wi-Fi interface), interface: en0[802.11], ipv4, dns, uses wifi}}, _NSURLErrorFailingURLSessionTaskErrorKey=LocalDataTask <0568A3A0-A40C-42A8-9491-2FC52D71EFFF>.<4>, _NSURLErrorRelatedURLSessionTaskErrorKey=( "LocalDataTask <0568A3A0-A40C-42A8-9491-2FC52D71EFFF>.<4>" ), NSLocalizedDescription=似乎已断开与互联网的连接。, NSErrorFailingURLStringKey=https://sharkserver.dypc.top/shark_user/login, NSErrorFailingURLKey=https://sharkserver.dypc.top/shark_user/login, _kCFStreamErrorDomainKey=1} 请求失败：似乎已断开与互联网的连接。 以下是问题的具体描述 我的A手机（15pro max 版本18,6,1） 使用xcode直接在A手机上运行我的程序 尝试发起post请求的时候得到了该报错。 我做了以下尝试 1.检查了A手机网络，一切正常，浏览器和其他app均可正常访问网络 2.检查了A手机上我的app权限，确认我因为为我的程序打开了无线网络和蜂窝流量 3.重启A手机，还原A手机网络设置，还原A手机所有设置，重启mac电脑 以上做法均无效，依旧报上面的错误 4.然后我尝试使用B手机(iPhone13 版本18.5)安装该程序 ，B手机可以正常运行并成功发起post请求，证明我的代码没有问题 5.我将代码上传至testfight 然后使用A手机下载testfight里的该程序 ，程序可以成功发起post请求没有任何错误，我再次使用xcode运行该程序到真机，又得到了Code=-1009错误 无法发起post请求

I use eapolcfg in Apple's open source eap8021x repository to connect to the enterprise network. 1.https://github.com/gfleury/eap8021x-debug https://opensource.apple.com/source/eap8021x/eap8021x-304.100.1/ Our enterprise network authentication is PEAP. So far, I have created a profile using the following commands and have done the access. ./eapolcfg createProfile --authType PEAP --SSID myssid --securityType WPA2 --userDefinedName MyProfile ./eapolcfg setPasswordItem --password mypassword --name myname --SSID myssid ./eapolcfg startAuthentication --interface en0 --SSID myssid After I performed this series of operations, I passed BOOL success = [self.interface associateToEnterpriseNetwork:network identity:nil username:username password:password error:&error]; Connection will pop up the following pop-up window, sometimes associateToEnterpriseNetwork will fail. I don't know what went wrong, is it that I missed some steps through the eapolcfg [tool?] This function also reports the following error：Error Domain=com.apple.coreWLAN.EAPOL.error Code=1 "(null)" Please answer my questions. Thank you very much

Hello all, Does anyone know how long it will take Apple to approve multicast entitlement approval after the Apple form is submitted? Any input would be appreciated. Thank you Allyson

We have an application which is written in Swift, which activates network extension (Transparent Proxy). We want to use MDM deployment for this network system extension. Our Transparent Proxy module is a system extension, which is exposing an app proxy provider interface (We are using NETransparentProxyProvider class and in extension’s Info.plist we use com.apple.networkextension.app-proxy key.) We don’t have any remote server setup to forward the traffic, instead we open a connection with a certain localhost:port to redirect the traffic which is received in our transparent proxy. We have another module that listens to the particular localhost:port to process the traffic further. As per https://developer.apple.com/documentation/devicemanagement/vpn/transparentproxy documentation, we noticed that we can use the VPN payload with app-proxy as Provider Type for Transparent Proxy. We were able to install the profile created via Jamf Pro and also while in stalling our product the Transparent Proxy gets mapped with the one which is installed via profile. However after that the network is broken and hence unable to browse anything. We are suspecting the remote server filed is causing this. So we tried creating the custom profile without remote server address for VPN payload, but we are unable to install the profile. It throws below error: 2025-02-11 16:43:55.193348+0530 0x2f880 Error 0x0 6815 0 mdmclient: (NetworkExtension) [com.apple.networkextension:] Failed to save configuration DGWebProxy because it is invalid: Error Domain=NEConfigurationErrorDomain Code=2 "configuration is invalid: Missing server address" UserInfo={NSLocalizedDescription=configuration is invalid: Missing server address}
2025-02-11 16:43:55.193376+0530 0x2f880 Error 0x0 6815 0 mdmclient: (NetworkExtension) [com.apple.networkextension:] NEProfileIngestion Error occurred when saving configuration 'DGWebProxy': configuration is invalid: configuration is invalid: Missing server address 
2025-02-11 16:43:55.196159+0530 0x2f880 Error 0x0 6815 7 mdmclient: [com.apple.ManagedClient:CPDomainPlugIn] [ERROR] [0:MDMDaemon:CPDomainPlugIn:<0x2f880>] <<<<< PlugIn: InstallPayload [NEProfileIngestionPlugin] Error: Error Domain=ConfigProfilePluginDomain Code=-319 "The ‘VPN Service’ payload could not be installed. The VPN service could not be created." UserInfo={NSLocalizedDescription=The ‘VPN Service’ payload could not be installed. The VPN service could not be created.} <<<<<
2025-02-11 16:43:55.196826+0530 0x2f880 Error 0x0 6815 7 mdmclient: [com.apple.ManagedClient:MDMDaemon] [ERROR] [0:MDMDaemon:<0x2f880>] [CE] PlugIn_InstallPayload ==> Error Domain=ConfigProfilePluginDomain Code=-319 "The ‘VPN Service’ payload could not be installed. The VPN service could not be created." UserInfo={NSLocalizedDescription=The ‘VPN Service’ payload could not be installed. The VPN service could not be created.} Can we create MDM profile for Transparent Proxy without remote server address?

Please ask Apple to provide an interface for sending follow-ups like Samsung's WiFi Aware.

This is probably a basic question but I wanted to ask your advice for the best way to take consenting users' Watch data from Apple Health Kit and send it to our central server? One idea we had was to create an iOS app that gets the data from Apple's Health SDK on the phone and sends it to our server. Would appreciate any help here, thank you.

Hello, I have been implementing NEAppPushProvider class to establish my own protocol to directly communicate with our provider server without the need to rely on APNs for background push notifications. I am at a stage where I am able to establish a tcp communicator and receive messages back and forth but I noticed that when I disconnect from the WIFI I've set up by setting a given SSID, I am not getting hit on the Stop method. Below is briefly how I load and save preferences. NEAppPushManager appPushManager = new NEAppPushManager(); appPushManager.LoadFromPreferences((error) =&gt; { if (error != null) { Console.WriteLine($"Error loading NEAppPushManager preferences: {error.LocalizedDescription}"); return; } if (!enable) { Console.WriteLine("Disabling Local Push Provider..."); appPushManager.Enabled = false; // ✅ Immediately update UserDefaults before saving preferences userDefaults.SetBool(false, Constants.IsLocalPushEnabled); userDefaults.Synchronize(); appPushManager.SaveToPreferences((saveError) =&gt; { if (saveError != null) { Console.WriteLine($"Error disabling Local Push: {saveError.LocalizedDescription}"); } else { Console.WriteLine("Local Push successfully disabled."); } }); return; } // ✅ Now we can safely enable Local Push Console.WriteLine($"Enabling Local Push for SSID: {_currentSSID}"); appPushManager.MatchSsids = new string[] { _currentSSID }; appPushManager.LocalizedDescription = "LocalPushProvider"; appPushManager.ProviderBundleIdentifier = Constants.LocalPushExtensionBundleId; appPushManager.Enabled = true; appPushManager.SaveToPreferences((saveError) =&gt; { if (saveError != null) { Console.WriteLine($"Error saving Local Push settings: {saveError.LocalizedDescription}"); } else { Console.WriteLine("✅ Local Push successfully registered."); userDefaults.SetBool(true, Constants.IsLocalPushEnabled); userDefaults.Synchronize(); } }); }); I've read through documentation and was expecting the Stop method to be hit when I turn off Wifi. Am I missing anything? Please let me know if I should provide more info. Currently I just have a console writeline method inside the Stop method to see if it actually gets hit.

Hello, I’m developing an iOS app with Xcode (Objective-C / Swift), and I would like to know if there is any supported way to retrieve a list of nearby Wi-Fi networks (their SSID and signal strength). I know that NEHotspotConfigurationManager allows to configure a specific network, and the Access WiFi Information entitlement allows getting the current connected network. But is there any API (public, private, or special entitlement) that allows scanning nearby Wi-Fi networks — even for limited purposes like configuration of IoT equipment, or MFi devices? I have seen some apps doing this in the past (probably via private API), but I want to know what is the current official solution. Thanks a lot!

I created a self signed CA and use it to generate/sign a client cert using openssl. Then I use the self signed client cert to do TLS client authentication with my server (which also uses the self signed CA). The issue I have is when I validate the self signed CA, by calling SecTrustEvaluateAsyncWithError, it always complains this error “'DigiCert Global Root G3' certificate is not trusted". However that CA (DigiCert Global Root G3) is not my self signed CA (my CA is 'MQTTSampleCA' and I attached a dump of the my CA cert in the PR in the end of this post), so I'm confused why the API keeps complaining that CA. After some researching, I see that is a well known CA so I download its cert from https://www.digicert.com/kb/digicert-root-certificates.htm, install and trust it on my iOS device, but that doesn't help and I still get the same error. I provide all the repro steps in this PR: https://github.com/liumiaojq/EmCuTeeTee/pull/1, including how I generate the certs and the source codes of a test app that I used to do cert validation. I appreciate if anyone can share insights how to resolve this error.

Hi we want to use CONNECT-IP extension within the MASQUE protocol suite. we want to be able to reroute ICMP packets from our machine and redirect them to our MASQUE proxy. we want to avoid a creation of virtual interface or modifying the routing tables. is it possible, if so, how can it be achieved. thanks

I'm trying to distribute a sandboxed macOS app with a PacketTunnelProvider (system extension) via direct distribution (outside of AppStore). The app and the extension both use the same app group, using the new group.com.XXXX.YYYY format detailed here for 10.15+ https://developer.apple.com/forums/thread/721701 I've also followed the instructions below to get around the quirk of not being able to directly process it via XCode: https://developer.apple.com/forums/thread/737894 I've re-signed with Developer ID certificate, all that is smooth and successfully notarized. However upon running the app I get: "My.app" would like to access data from other apps. Checking ~/Library/Containers ~/Library/Group Containers I see the correct files folders have been created before I select Don't Allow and Allow. My app does not access any files or folders outside of the sandboxed directories. How can I prevent this from happening? In order to diagnose further, how to diagnose exactly which files/folder the app is trying to access that is causing this problem?

iOS 26 NWPathMonitor dont handle any updates - always all good.

I am developing an Xcode app with a job feed, with profile view, with chat eg. I fetch using federatet queries to my microservices thru Apollo Router. Infront of the Apollo Router i Have a Kong that adds a X user ID, that the microservices use for personalized feed and other user info. The info is stored with SwiftData. My thought is that i should add a better way of controlling when i need to fetch. I have a “lastupdateAPI” with different entities (profile, profile picture eg). So when nothing has changed we do not fetch. But rather then using a own API for this, isnt ETag better? Or is it any other recommendations with Xcode Swiftui. Good strategies for not fetching what i already have?

My personal project is a bit further along however after not being able to get this to work in my app I fell back to a much simpler/proven implementation out there. There is this project on GitHub with a guide that implements a barebones app extension with packet tunneling. I figure this can give us common ground. After changing the bundle and group identifiers to all end with -Caleb and or match up I tried running the app. The app extension does not work whatsoever and seemingly for reasons that are similar to my personal project. If I pull up the console and filter for the subsystem (com.github.kean.vpn-client-caleb.vpn-tunnel) I see the following. First you see installd installing it 0x16ba5f000 -[MIUninstaller _uninstallBundleWithIdentity:linkedToChildren:waitForDeletion:uninstallReason:temporaryReference:deleteDataContainers:wasLastReference:error:]: Destroying container com.github.kean.vpn-client-caleb.vpn-tunnel with persona 54D15361-A614-4E0D-931A-0953CDB50CE8 at /private/var/mobile/Containers/Data/PluginKitPlugin/2D0AE485-BB56-4E3E-B59E-48424CD4FD65 And then installd says this (No idea what it means) 0x16b9d3000 -[MIInstallationJournalEntry _refreshUUIDForContainer:withError:]: Data container for com.github.kean.vpn-client-caleb.vpn-tunnel is now at /private/var/mobile/Containers/Data/PluginKitPlugin/2D0AE485-BB56-4E3E-B59E-48424CD4FD65 Concerningly runningboardd seems to immediately try and stop it? Executing termination request for: <RBSProcessPredicate <RBSProcessBundleIdentifiersPredicate| {( "com.github.kean.vpn-client-caleb", "com.github.kean.vpn-client-caleb.vpn-tunnel" )}>> [app<com.github.kean.vpn-client-caleb(54D15361-A614-4E0D-931A-0953CDB50CE8)>:1054] Terminating with context: <RBSTerminateContext| explanation:installcoordinationd app:[com.github.kean.vpn-client-caleb/54D15361-A614-4E0D-931A-0953CDB50CE8] uuid:963149FA-F712-460B-9B5C-5CE1C309B2FC isPlaceholder:Y reportType:None maxTerminationResistance:Absolute attrs:[ <RBSPreventLaunchLimitation| <RBSProcessPredicate <RBSProcessBundleIdentifiersPredicate| {( "com.github.kean.vpn-client-caleb", "com.github.kean.vpn-client-caleb.vpn-tunnel" )}>> allow:(null)> ]> Then runningboardd leaves a cryptic message Acquiring assertion targeting system from originator [osservice<com.apple.installcoordinationd>:244] with description <RBSAssertionDescriptor| "installcoordinationd app:[com.github.kean.vpn-client-caleb/54D15361-A614-4E0D-931A-0953CDB50CE8] uuid:963149FA-F712-460B-9B5C-5CE1C309B2FC isPlaceholder:Y" ID:33-244-5222 target:system attributes:[ <RBSPreventLaunchLimitation| <RBSProcessPredicate <RBSProcessBundleIdentifiersPredicate| {( "com.github.kean.vpn-client-caleb", "com.github.kean.vpn-client-caleb.vpn-tunnel" )}>> allow:(null)> ]> And that seems to be all I have to go off of.... If I widen my search a bit I can see backboardd saying things like Connection removed: IOHIDEventSystemConnection uuid:57E97E5D-8CDE-467B-81CA-36A93C7684AD pid:1054 process:vpn-client type:Passive entitlements:0x0 caller:BackBoardServices: <redacted> + 280 attributes:{ HighFrequency = 1; bundleID = "com.github.kean.vpn-client-caleb"; pid = 1054; } state:0x1 events:119 mask:0x800 dropped:0 dropStatus:0 droppedMask:0x0 lastDroppedTime:NONE Or Removing client connection <BKHIDClientConnection: 0xbf9828cd0; IOHIDEventSystemConnectionRef: 0xbf96d9600; vpid: 1054(vAF7); taskPort: 0x5D777; bundleID: com.github.kean.vpn-client-caleb> for client: IOHIDEventSystemConnection uuid:57E97E5D-8CDE-467B-81CA-36A93C7684AD pid:1054 process:vpn-client type:Passive entitlements:0x0 caller:BackBoardServices: <redacted> + 280 attributes:{ HighFrequency = 1; bundleID = "com.github.kean.vpn-client-caleb"; pid = 1054; } state:0x1 events:119 mask:0x800 dropped:0 dropStatus:0 droppedMask:0x0 lastDroppedTime:NONE source:HID There's really nothing in the sysdiagnose either. No crash no nothing. I am stumped. Any idea what might be going wrong for me here? Has something about the way app extensions or sandbox rules work changed in later OSes?

Is it possible to capture or inspect UDP traffic using iOS content filter APIs (e.g., NEFilterDataProvider)? If not, what are the current technical or policy limitations that prevent UDP inspection via these frameworks? Any insights or suggestions on these topics would be highly appreciated.