Hi everyone, I'm hoping someone can share their experience or offer advice on entitlement request timelines. I previously had two bundle IDs approved for an app I'm testing via TestFlight - both were approved within a few days. I recently submitted a request for a third bundle ID (JMSHRM8W5J), and after realizing I may not have included enough detail, I submitted a follow-up request (XS2QYC59UU) with more context. It's now been almost three weeks, which is significantly longer than my earlier approvals - though I recognize some of that time included the holidays. A few questions for the community: Has anyone experienced longer wait times for additional entitlements on an existing project (with approved entitlements)? Did submitting a second request help or potentially slow things down? Is there anything I should include in a request to improve chances of quick approval? Any insight would be appreciated. Thanks!

In Xcode, under Signing & Capabilities (Release) for our bundle ID the selected provisioning profile does include the entitlement: com.apple.developer.payment-pass-provisioning However, when we upload a new build to TestFlight, the Build Metadata → Entitlements section for the same bundle ID does not include com.apple.developer.payment-pass-provisioning. Because of this, PKAddPaymentPassViewController does not open in TestFlight builds. This suggests that while the entitlement is enabled for the App ID and visible in Xcode, it may not yet be propagated to App Store Connect’s signing service for TestFlight/App Store builds. Please Note: The Wallet Entitlements team had confirmed that they had granted entitlements for our team and the apple IDs Xcode : 26.0.1 Profile being used: Distribution Profile

Hi everyone, I am attempting to generate an Ad Hoc provisioning profile for my iOS app that includes MusicKit capabilities, but the generated .mobileprovision file consistently lacks the required entitlement, despite the configuration appearing correct in the developer portal. The Issue: I have enabled MusicKit under the "App Services" tab for my App ID. I have saved this configuration, verified it is checked in the UI, and then regenerated and downloaded my provisioning profile. However, when I inspect the internal contents of the .mobileprovision file, the Entitlements dictionary does not contain the com.apple.developer.music-kit key. It only contains the standard keys (Team ID, App ID, etc.). Steps Taken: Created a brand new App ID to rule out legacy data issues. Explicitly enabled "MusicKit" under the App Services tab for this new identifier. Created a fresh Ad Hoc Distribution profile linked to this new ID. Downloaded the profile and inspected the file structure: the MusicKit entitlement is completely absent. Attempted toggling the service off and on, saving, and regenerating the profile multiple times. Has anyone experienced a specific bug where "App Services" (like MusicKit) fail to propagate to the Provisioning Profile generator? Is there a secondary "Capability" (e.g., Media Library) that must also be enabled to trigger the inclusion of the MusicKit entitlement? Any guidance would be appreciated.

I am seeking clarification on whether the various driverkit entitlement families (com.apple.developer.driverkit.family.*) are available for development on my local Mac without requesting entitlements from Apple. My experience is inconsistent with public statements made by Apple, and I am wondering if there have been changes to development entitlements as of 2026. I am hoping there is something obvious that I have missed. At WWDC2022 Apple stated that "In MacOS... In fact, all DriverKit family entitlements are now available to use for development." On these very forums, Eskimo himself also suggested this was the case in 2024. However, my own experience has been that in my provisioning profile on my paid developer account, I am not able to obtain com.apple.developer.driverkit.family.networking for the purpose of developing a driver for unsupported hardware. As you can see, I do not have the networking entitlement: { .. "Entitlements" => { ... "com.apple.developer.driverkit" => true "com.apple.developer.driverkit.transport.usb" => [ 0 => { "idVendor" => "*" } ] And there appears to be no mechanism to add these entitlement:

Hi Apple Developer Support, We are reaching out to request guidance on a testing constraint we have encountered related to iOS Universal Links and Associated Domains entitlements. As part of aligning with updated recommendations from our authentication provider, we have transitioned our mobile apps to use HTTPS redirect callbacks (Universal Links) instead of custom URI schemes. This works as expected in production and on real physical devices. However, we are encountering a significant issue in our cloud-based device testing environment. When our testing platform re-signs the app to run it on their infrastructure, the re-signing process strips the Associated Domains entitlement from the app bundle. As a result, iOS no longer honors our Universal Links, which breaks the authentication redirect flow — the callback cannot route back into the app after the user authenticates. We have identified a potential workaround that would involve disabling app re-signing in the testing platform, but this requires provisioning under an Apple Enterprise Developer account. This introduces considerable operational complexity, as it would require us to maintain separate signing and distribution paths alongside our existing Apple Developer Program membership. Before pursuing that path, we wanted to understand Apple's perspective on the following: Is there a supported or recommended approach for preserving Associated Domains entitlements when an app is re-signed by a third party (e.g., a cloud testing platform)? Are there any provisioning or entitlement configurations that would allow Universal Links to function correctly in re-signed builds without requiring an Enterprise Developer account? Does Apple have documented best practices for validating Universal Link–based flows in automated or cloud-based testing environments? Are there any alternative deep linking patterns that would be more resilient to re-signing while still meeting App Store and platform security requirements? Any guidance or recommendations from Apple on how to handle this within the bounds of the standard Apple Developer Program would be greatly appreciated. Thank you for your time.

We have an app with the default email entitlement that was granted several years ago. During our latest deployment, we received an error from our pipeline. When testing a manual submission in Xcode, we saw this error: Entitlement com.apple.developer.mail-client not found and could not be included in profile. This likely is not a valid entitlement and should be removed from your entitlements file. We checked the provisioning profile, and the default email entitlement is still present. It is visible on the certificate portal and also in the embedded.mobileprovision file. Can you suggest what we can do to release a new version of our app?

Our team already has Family Controls (Distribution) entitlement approved for the main app and existing Screen Time extensions. We recently added a new Shield Configuration extension to show a custom on-device shield UI using ManagedSettingsUI. It is only used for UI rendering and does not collect or send any user data. However, the entitlement does not seem to be applied to this new extension yet, and we are blocked from proceeding with builds. We have already contacted support but haven’t received an update yet. Case ID: 102881099623 Could someone please help to apply/sync for the Family Controls distribution entitlement or guide us on the next steps? Happy to share app details privately if needed. Thanks.

We are implementing an exam mode feature for an educational app used in schools, which restricts device usage during assessments. We requested the Automatic Assessment Configuration capability, received approval from Apple, and confirmed that the capability is listed as Assigned under our App ID in the Apple Developer portal. What works: When using a Development Provisioning Profile (downloaded from the portal), the entitlement key com.apple.developer.automatic-assessment-configuration is included in the profile, and our exam lock feature works correctly in development testing. The problem: When we manually download a Distribution (InHouse/Enterprise) Provisioning Profile from the portal — even after creating a new one — the entitlement key com.apple.developer.automatic-assessment-configuration is not present in the profile. verified this by running: security cms -D -i YourProfile.mobileprovision The key appears in the Development PP but is absent in the manually downloaded Distribution PP, despite the App ID showing the capability as Assigned. Note: When using Xcode's automatic signing, the generated profile does include the entitlement correctly. However, due to our organization's internal security policy, we are required to use manually managed provisioning profiles and cannot use Xcode automatic signing for distribution builds. Questions: Is the com.apple.developer.automatic-assessment-configuration entitlement intentionally restricted to Development profiles only, or is this a known portal issue with managed capabilities not being embedded in manually created Distribution profiles? Is it technically supported and intended to use AEAssessmentSession in an InHouse (Enterprise) distribution environment? If InHouse is not supported, is the correct path to test internally via Development profiles and then submit through App Store distribution to include this entitlement in production? Any guidance on the correct technical direction would be greatly appreciated.

Question based on the https://developer.apple.com/forums/thread/649172 What is the mechanics of using this entitlement? What should be done in the UNNotificationServiceExtension in order to prevent the display of a notification for the user? Just pass an empty UNNotificationContent object to contentHandler or something else?

I'm working on a system extension leveraging endpoint security entitlement. However, while in development, is there a way to continue working and testing locally without having the endpoint security entitlement approved or needing the extension signed. I got these errors running a build: Provisioning profile "Mac Team Provisioning Profile: "com.xxxxx.extension" doesn't include the com.apple.developer.endpoint-security.client entitlement.

Hello everyone can you help me, i have requested main camera access API Enterprise and have got the license to, and i have setting up the project main camera access demo from apple with my new license and have create app bundle and identifier for it but when i tried to deploy it test flight i got some error say "Profile doesn't support Main Camera Access" and "Profile doesn't include the com.apple.developer.arkit.main-camera-access.alow entitlement, even have do it it app Certificates, Identifiers & Profiles and add the additional capability Main Camera Access. can you help me fixing this so that i can use Main Camera Access Entitlement

So I just updated Xcode to 16.3 and updated a project to its recommended build settings which includes "Register App Groups". So I have an outside Mac App Store app that uses app groups. Here we have an action extension. I can't debug it, can't get it to run. Nothing useful in Xcode is displayed when I try... but it looks like a code signing issue when I run and have Console open. So I try to make a provisioning profile manually and set it...didn't work. I noticed now though in signing & capabilities the group id is in red...like it's invalid, or something? This was a "macOS styled" group without the "group." prefix. So am I supposed to switch it to have the group. prefix? It makes the red text go away (no warnings or anything about app groups here, just red text). So if I change it to group. prefix..does that make an entire new container?What happens on app update for installs that don't have group. prefix? Does the system transparently migrate the group? Or Am I supposed to migrate the entire group container to the identifier with group. prefix? Also how does this affect running on older version of macOS? If I go with the "group." prefix to make the red text go away,.. what happens on macOS 11.0? Got a little more than I bargained for here after midnight.

My command line tool with a JIT entitlement is failing to run on Sequoia. 2025-05-26 14:17:09.758 E taskgated-helper[91764:3ab7036] [com.apple.ManagedClient:ProvisioningProfiles] Disallowing DecisionRuleTool because no eligible provisioning profiles found 2025-05-26 14:17:09.758 Df amfid[576:3ab6d6b] /Users/jim/DecisionRuleTool not valid: Error Domain=AppleMobileFileIntegrityError Code=-413 "No matching profile found" UserInfo={NSURL=file:///Users/jim/DecisionRuleTool, NSLocalizedDescription=No matching profile found} 2025-05-26 14:17:09.759 Df kernel[0:3ab7031] (AppleMobileFileIntegrity) AMFI: When validating /Users/jim/DecisionRuleTool: 2025-05-26 14:17:09.759 Df kernel[0:3ab7031] mac_vnode_check_signature: /Users/jim/DecisionRuleTool: code signature validation failed fatally: When validating /Users/jim/DecisionRuleTool: 2025-05-26 14:17:09.759 Df kernel[0:3ab7031] proc 91763: load code signature error 4 for file "DecisionRuleTool" 2025-05-26 14:17:09.759 Df kernel[0:3ab7032] (AppleSystemPolicy) ASP: Security policy would not allow process: 91763, /Users/jim/DecisionRuleTool Codesign isn't giving me any clues as to why. It validates. Asking it what the entitlements are on the binary: % codesign --display --entitlements - /Users/joconnor/MACEP-9852-2/tools/detection/DecisionRuleTool Executable=/Users/jim/DecisionRuleTool [Dict] [Key] com.apple.application-identifier [Value] [String] XXXXXXXXX.com.mycompany.drt [Key] com.apple.developer.team-identifier [Value] [String] XXXXXXXXX [Key] com.apple.security.cs.allow-jit [Value] [Bool] true https://developer.apple.com/documentation/Xcode/signing-a-daemon-with-a-restricted-entitlement This makes it look like this may be hopeless, that I can't create a command line took with proper entitlements.

Can someone tell me the applications requirements for using the secure enclave on MacOS? Does the application need to be signed with the secure-enclave entitlement in order to use it? Since this is a restricted entitlement, does my App ID need approval to use it from Apple? Currently I'm building in XCode 16 on Sequoia (15.5) using developer signing. My application is a C/C++ daemon running as plist out of /Library/LaunchDaemons. I have also built it as an application using the instructions here but this has not lead to a solution: https://developer.apple.com/documentation/xcode/signing-a-daemon-with-a-restricted-entitlement/ When I run my application from the command line via sudo signed but without the secure-enclave entitlement enabled in my entitlements file it runs. The first call to: SecAccessControlRef access = SecAccessControlCreateWithFlags( kCFAllocatorDefault, kSecAttrAccessibleWhenUnlockedThisDeviceOnly, kSecAccessControlPrivateKeyUsage, &error); succeeds without error. The call to create the key using: SecKeyRef privateKey = SecKeyCreateRandomKey(attributes, &error); then fails with error: (OSStatus error -50 - Failed to generate keypair) Here are the setup attributes (keySize = 256): CFDictionarySetValue(attributes, kSecAttrKeyType, kSecAttrKeyTypeECSECPrimeRandom); CFDictionarySetValue(attributes, kSecAttrKeySizeInBits, keySize); CFDictionarySetValue(attributes, kSecAttrLabel, keyName); CFDictionarySetValue(attributes, kSecAttrApplicationTag, keyLabel); CFDictionarySetValue(attributes, kSecAttrTokenID, kSecAttrTokenIDSecureEnclave); // Store in the Secure Enclave CFDictionarySetValue(attributes, kSecAttrKeyClass, kSecAttrKeyClassPrivate); CFDictionarySetValue(attributes, kSecAttrAccessControl, access); CFDictionarySetValue(attributes, kSecAttrIsPermanent, kCFBooleanTrue); // persist key across app restarts and reboots CFDictionarySetValue(attributes, kSecAttrCanEncrypt, kCFBooleanTrue); CFDictionarySetValue(attributes, kSecAttrCanDecrypt, kCFBooleanTrue); CFDictionarySetValue(attributes, kSecAttrAccessible, kSecAttrAccessibleWhenUnlockedThisDeviceOnly); CFDictionarySetValue(attributes, kSecReturnPersistentRef, kCFBooleanTrue); When I run the application signed and include the "com.apple.developer.secure-enclave" in my entitlements file it crashes at startup. I believe this is to be expected based on above. How do I proceed such that my application can use the secure enclave correctly?

I'm facing a persistent issue with provisioning profiles not including the com.apple.developer.in-app-purchase entitlement, even though the In-App Purchase capability is clearly enabled in the Developer Portal for my app. What I’ve already done: Confirmed that the In-App Purchase capability is enabled in the App ID configuration Deleted all provisioning profiles locally (~/Library/MobileDevice/Provisioning Profiles) Regenerated both Development and App Store provisioning profiles from scratch Tried Xcode's automatic signing (after properly registering the device) Verified the provisioning profiles via Terminal (security cms -D -i ...) — the IAP entitlement is missing every time Recreated valid distribution and development certificates Cleaned the Xcode project and settings The result: Every attempt to build or archive the app in Xcode returns: Missing entitlement: com.apple.developer.in-app-purchase I've also opened a support case with Apple, but so far I’ve only been redirected to general documentation. Has anyone encountered this recently? Is there a known delay or sync issue on Apple’s side when enabling capabilities? Can the provisioning profile or entitlement data be manually refreshed by Apple? Is there any workaround that worked for you in this situation?

Hello, I already have got approval from Apple for com.apple.developer.family-controls entitlement When I am building my app, there is one part where I need to check the list of applications which I have blocked with my app. To get the list I have to have com.apple.developer.managed-settings entitlement ... Now how and where show I get hold of it ? I already got permission for Family Control, how do I get hold of this now ?

我没有勾选entitlements 中的” com.apple.security.network.server“和” com.apple.security.device.usb“，但是确实在打包时又自动出现在包里，我现在无法解决这个问题，我需要帮助，谢谢 我的.entitlements 文件如下： 排查命令： codesign -d --entitlements :- ./Device\ Guard.app Executable=/Users/zhanghai/Library/Developer/Xcode/DerivedData/MacGuardApp-fvfnspyxcojxojdfclyohrnupgsh/Build/Products/Debug/Device Guard.app/Contents/MacOS/Device Guard warning: Specifying ':' in the path is deprecated and will not work in a future release

This is a continuation of my own old post that became inactive to regain traction. I am trying to resolve issues that arise when distributing a macOS app with a SysExt Network Extension (Packet Tunnel) outside the App Store using a Developer ID Certificate. To directly distribute the app, I start with exporting the .app via Archive in Xcode. After that, I create a new Developer ID provisioning profile for both the app and sysext and replace the embedded ones in the .app package. After I have replaced the provisioning profiles and the have the entitlements files ready, I start signing the frameworks, sysext and parent app. codesign --force --options runtime --timestamp --sign "Developer ID Application: <name>"<app>.app/Contents/Library/SystemExtensions/<sysext>.systemextension/Contents/Frameworks/<fw>.framework/Versions/A/<fw> codesign --force --options runtime --timestamp --sign "Developer ID Application: <name>" <app>.app/Contents/Frameworks/<fw>.framework/ codesign --force --options runtime --entitlements dist-vpn.entitlements --timestamp --sign "Developer ID Application: <name>" <app>.app/Contents/Library/SystemExtensions/<sysext>.systemextension/Contents/MacOS/<sysext> codesign --force --options runtime --entitlements dist.entitlements --timestamp --sign "Developer ID Application: <name>" <app>.app After validation is successful with codesign --verify --deep --strict --verbose=4 <app>.app I zip the package, notarize and staple it ditto -c -k --keepParent "<app>.app" "<app>..zip" xcrun notarytool submit <app>.zip --keychain-profile “”<credents> --wait xcrun stapler staple <app>.app After that I finish creating signed and notarized .dmg/.pkg. hdiutil create -volname “<app>” -srcfolder “<app>.app/" -ov -format UDZO ./<app>.dmg codesign --force --sign "Developer ID Application: <name>" <app>.dmg xcrun notarytool submit <app>.dmg --keychain-profile "<credentials>" --wait xcrun stapler staple <app>.dmg Then when I move the .dmg to a clean system, open the .dmg, move the .app to the Applications folder, the attempt to run it fails with “The application “” can’t be opened.”. When I look into the console, the gatekeeper disallows the launch job with the message:
 86127 debug ProvisioningProfiles taskgated-helper ConfigurationProfiles entitlements: { "com.apple.developer.networking.networkextension" = ( "packet-tunnel-provider-systemextension" ); "com.apple.developer.system-extension.install" = 1; "com.apple.developer.team-identifier" = <teamid>; "keychain-access-groups" = ( “<teamid>.<app>.AppGroup" ); } com.apple.ManagedClient
<app>: Unsatisfied entitlements: com.apple.developer.networking.networkextension, keychain-access-groups, com.apple.developer.system-extension.install, com.apple.developer.team-identifier LAUNCH: Runningboard launch of <app> <private> returned RBSRequestErrorFailed, error Error Domain=RBSRequestErrorDomain Code=5 "Launch failed." UserInfo={NSLocalizedFailureReason=Launch failed., NSUnderlyingError=0x600001a25830 {Error Domain=NSPOSIXErrorDomain Code=153 "Unknown error: 153" UserInfo={NSLocalizedDescription=Launchd job spawn failed}}}, so returning -10810

 I went through all possible formats (macOS-Style and iOS-Style App Group IDs) and combinations of appgroups according to the post “App Groups: macOS vs iOS: Working Towards Harmony”. But none of those work for me. The weird part is that when I try the same steps on different developer account, I am able to get the app running. What can be wrong?

Hi, I am developing an iOS app that includes a ReplayKit Broadcast Upload Extension which requires the com.apple.developer.broadcast-upload entitlement. The app is intended for internal development and testing on my own devices and is not yet distributed on the App Store. Even after setting com.apple.developer.broadcast-upload=true in my .entitlements file, and linking it in Build Settings &gt; Code Signing Entitlements; my downloaded provisional profile still did not contain the broadcast-upload entitlement. May I know if I need explicit Apple's approval for adding the broadcast-upload entitlement; even if it's just for testing on my own devices? Thanks.

I am building an application using .NET and Avalonia UI. The application is cross-platform. One of the tasks of the application is to coordinate data collection that is then routed into a Docker container for analysis. Everything works as expected in Windows. Everything works as expected in macOS on the development workstation and before packaging. After I package/codesign into a hardened runtime, I start seeing crashes at the moment when I try to execute the system calls to Docker. I am reasonably confident that this has something to do with an entitlement flag or some other permissions issue. I have been trying to sort this on my own for a while. I am only hoping someone can nudge me in the right direction. Thanks, Kevin