In Xcode, under Signing & Capabilities (Release) for our bundle ID the selected provisioning profile does include the entitlement: com.apple.developer.payment-pass-provisioning However, when we upload a new build to TestFlight, the Build Metadata → Entitlements section for the same bundle ID does not include com.apple.developer.payment-pass-provisioning. Because of this, PKAddPaymentPassViewController does not open in TestFlight builds. This suggests that while the entitlement is enabled for the App ID and visible in Xcode, it may not yet be propagated to App Store Connect’s signing service for TestFlight/App Store builds. Please Note: The Wallet Entitlements team had confirmed that they had granted entitlements for our team and the apple IDs Xcode : 26.0.1 Profile being used: Distribution Profile

I’m working on an iOS VPN app and looking into using NETunnelProvider (Packet Tunnel) for the VPN implementation. From the documentation it seems that Packet Tunnel is required for VPN protocols like OpenVPN, but the Packet Tunnel capability doesn’t appear to be available by default. Does using NETunnelProvider / Packet Tunnel require a special entitlement to be enabled by Apple for App Store apps? If so, what is the general process for requesting or enabling that entitlement?

Hi, I am using a carrier account and have been able to use com.apple.CommCenter.fine-grained entitlement successfully for the past few years. Currently I am trying to use this entitlement in an app clip. but recieving the following error: Validation failed (409) Invalid entitlement. App clip 'xyz.app/AppClips/appClip.app' contains a code signing entitlement 'com.apple.coretelephony.SimAuthentication.allow' that is not supported. Remove the 'com.apple.coretelephony.SimAuthentication.allow' entitlement. (ID: 87f67652-0e22-441d-b7ec-ea4baacab39e) NSUnderlyingError : Validation failed (-19241) Invalid entitlement. App clip 'xyz.app/AppClips/appClip.app' contains a code signing entitlement 'com.apple.coretelephony.SimAuthentication.allow' that is not supported. Remove the 'com.apple.coretelephony.SimAuthentication.allow' entitlement. status : 409 Is it possible to use com.apple.CommCenter.fine-grained entitlement in an app clip? if so do you have any suggestion how to resolve this error?

Hi everyone, I'm hoping someone can share their experience or offer advice on entitlement request timelines. I previously had two bundle IDs approved for an app I'm testing via TestFlight - both were approved within a few days. I recently submitted a request for a third bundle ID (JMSHRM8W5J), and after realizing I may not have included enough detail, I submitted a follow-up request (XS2QYC59UU) with more context. It's now been almost three weeks, which is significantly longer than my earlier approvals - though I recognize some of that time included the holidays. A few questions for the community: Has anyone experienced longer wait times for additional entitlements on an existing project (with approved entitlements)? Did submitting a second request help or potentially slow things down? Is there anything I should include in a request to improve chances of quick approval? Any insight would be appreciated. Thanks!

I want to help contribute a feature in a virtual-machine app in macOS that supports PCIe device passthrough over thunderbolt. I have a question about the entitlements. Since I do not represent the GPU vendors, would I be allowed to get a driver signed that matches GPU vendor IDs? Is there such a thing as wildcard entitlement for PCIDriverKit? I don't want end-users to have to disable SIP to be able to use this. Any suggestions/leads? Thank you.

Hello, I'm currently developing an iOS app that uses SensorKit. Everything works fine in development and testing — the app correctly requests and receives SensorKit permissions on test devices. In my App ID configuration, the SensorKit Reader Access entitlement (com.apple.developer.sensorkit.reader.allow) is included and visible in Xcode under the project’s entitlements list. However, when I try to archive and distribute the app, I get the following errors in Xcode: Provisioning profile failed qualification Profile doesn't support SensorKit Reader Access. Provisioning profile failed qualification Profile doesn't include the com.apple.developer.sensorkit.reader.allow entitlement. Even though my provisioning profile includes this entitlement, Xcode still refuses to distribute the app. Here’s what I’ve confirmed so far: The provisioning profile lists com.apple.developer.sensorkit.reader.allow in its entitlements. SensorKit works perfectly in debug and development builds. The issue only occurs when attempting to distribute (Archive → Distribute App). Could this be because my account has only development entitlement for SensorKit and not the distribution entitlement? If so, how can I verify or request the proper distribution entitlement for SensorKit Reader Access? Thank you for any guidance or confirmation from Apple regarding this entitlement behavior.

I have two apps - say A and B in my AppStore account, deployed in the AppStore. App A has obtained the com.apple.developer.usernotifications.filtering entitlement and this is added to my AppStore account by Apple after approval. Note that this is added for the account, and not for the specific app. Now, my app B also wants this functionality. Followed all the steps as done for app A - adding the already approved entitlement to my app B's identifier, regenerating the profiles, adding the key in the entitlements file, calling the completion handler with empty content like - contentHandler(UNNotificationContent()) Still the notifications show, the filtering is not working. Do I have to request the entitlement for App B separately? Even if I do request again, I am not sure if there is going to be any difference in the steps already done. The difference can only be if Apple has a mapping with the app id internally in their system, for the filtering to work? If I have white-labelled versions of apps A or B, do I have to request again then? Or does Apple restrict only one app to have this entitlement from one AppStore account? Please guide on the next steps here.

Hi, I was sent here by Apple developer account, it seems here is the only option for me, so your help is very much appreciated! Basically we are building a chromium based browser on iOS, we applied the "com.apple.developer.web-browser" entitlement, and it shows up in our identifier, profile etc. The app is signed with the new entitlement and published to the app store. However it is not listed as an option for default browser, doesn't matter which device I tried. I did verified that the Info.plist contains http/https urlschemes as required. In fact a few of us checked all available documents multiple times and still couldn't see why.

Validation failed (409) Missing Code Signing Entitlements. No entitlements found in bundle 'com.seeyon.yiboyun.child' for executable 'Payload/M3.app/PlugIns/CMPSharePublish.appex/CMPSharePublish'." (ID: 6e5429ed-b896-45a0-ab23-bb8fcb472072)

Hi everyone, I'm trying to add the Side Button Access entitlement to my voice-based conversational app following the documentation, but I'm unable to find it in Xcode. Steps I followed: Selected my app target in Xcode project navigator Went to the Signing & Capabilities tab Clicked the + Capability button Searched for "Side Button Access" Problem: The "Side Button Access" option does not appear in the capabilities list at all. Environment: I'm developing and testing in Japan (where this feature should be available) Xcode version: Xcode 26.2 beta 3 iOS deployment target: iOS 26.2 Questions: Is there any pre-registration or special approval process required from Apple before this entitlement becomes available? Are there any additional requirements or prerequisites I need to meet? Is this feature already available, or is it still in a limited beta phase? Any guidance would be greatly appreciated. Thank you!

I'm having trouble configuring the "IOPCIPrimaryMatch" entitlement. I'm currently developing using "sign to run locally" and have been able to confirm the expected behavior. I was considering signing with "Developer ID Application" for future distribution to customers, but after finding the following forum, I'm now aiming to sign with "Apple Development." https://developer.apple.com/forums/thread/743021 I'm currently having trouble with the IOPCIPrimaryMatch value. The "signing certificate" status in Xcode changes depending on the value, as follows: Successful if the value is as follows: IOPCIPrimaryMatch 0xFFFFFFFF&0x00161916 An error occurs if the value is as follows: IOPCIPrimaryMatch 0xFFFFFFFF&0x00161916 So I tried building and installing using "0xFFFFFFFF&0x00161916", but this time the driver was not assigned to the PCI device. By the way, when I used "sign to run locally", both the installation and assignment were successful with the following: IOPCIPrimaryMatch 0xFFFFFFFF&0x00161916 Could you please tell me the correct way to write this?

Hello, I am trying to publish a simple app to the App Store for the first time, and I am getting these 2 errors. Please note the knowledge base URLs shown in the screenshot are not clickable. I think this should be addressed. Any guidance on how to correct these issues will be greatly appreciated. Sincerely, Anis

I am a professor at the Mercer University School of Medicine (Macon, GA) and I teach a stress reduction course for first year medical students. I am developing an app to allow the students to trace their mediations as well as time them. Using ChatGPT with Xcode, I was able to get all the features in the app working except that the stopwatch timer would not continue when the iPhone goes to sleep. When ChatGPT made some changes, the build failed because automated signing failed and the com.apple developer.activity kit entitlement is missing I don’t see Live Activities in the capability section of signing & Capabilities and I don’t know how to fix the provisioning profile. How can I get help for this? Thank you!

Hello, We have a working application with several entitlements - com.apple.developer.endpoint-security.client and com.apple.developer.team-identifier. Recently, the Developer ID signing certificate expired and we created a new one according to the instructions on the website. Also the provisioning profile for those entitlements expired so we edited it to use the new certificate. We built using xcodebuild in a script and signed with codesign, We supply the certificate id and the entitlement in a plist file like this : codesign --timestamp --force --sign "${application_signature}" --options=runtime "${obj}" --entitlements "${SR_ENTITLEMENT_PATH}" (those env vars hold the correct values for the cert id and plist path as far as we checked). The signing works and looks ok with "codesign -dvvv": (XXXX replaces the real file name for privacy) Signature size=9050 Authority=Developer ID Application: XXXXXX. (XXXXX) Authority=Developer ID Certification Authority Authority=Apple Root CA Timestamp=16 Oct 2025 at 11:09:53 AM Info.plist=not bound TeamIdentifier=XXXXX Runtime Version=14.5.0 Sealed Resources=none Internal requirements count=1 size=184 [Dict] [Key] com.apple.application-identifier [Value] [String] XXXXX.com.XXXX.XXXX [Key] com.apple.developer.endpoint-security.client [Value] [Bool] true [Key] com.apple.developer.team-identifier [Value] [String] XXXXXX` But when the app need to run it is killed and the console shows the following: amfid: /private/tmp/XXXXX not valid: Error Domain=AppleMobileFileIntegrityError Code=-420 "The signature on the file is invalid" UserInfo={NSURL=file:///private/tmp/XXXXX, NSLocalizedDescription=The signature on the file is invalid} kernel: mac_vnode_check_signature: /private/tmp/CybereasonSensor: code signature validation failed fatally: When validating /private/tmp/XXXXX: Code has restricted entitlements, but the validation of its code signature failed. We didn't change any code or build differently (it's done by a CI jenkins job. So if the file is signed and the and has the entitlements why does it fail? what should be done? Thanks, Boaz

Hi there, I am trying to build the Apple SimpleAudioDriver example but fail with codesign and/or provisioning. I would be ok for now with the local option, but XCode 16.4 doesn't show the option "build to run locally" (SIP is disabled). When using "Automatically manage signing" it ends in a "Please file a bug report". I found that having two different development teams tripped it up, so I deleted all certificates and keys and made sure to be only signed into one account in Xcode. Can anyone give advice? Thanks a ton! Here is the URL to the sample: https://developer.apple.com/documentation/coreaudio/building-an-audio-server-plug-in-and-driver-extension macOS: 15.6.1 XCode: 16.4 Hardware: MacBook Pro M2 Max SIP: disabled

I'm posting this here after reading Quinn's post here: https://developer.apple.com/forums/thread/799000 The above entitlement is mentioned in IOUSBHostControllerInterface.h. It isn't an entitlement one can add using the + button on the Capabilities panel in Xcode. If I try to add it by hand, Xcode complains that it isn't in my profile. Is this a managed entitlement? We'd like to create a local USB "device" to represent a real device reachable over a network.

Hi - appreciate your help in advance! Building a simple habit tracking app. I got approval for FamilyControls distribution. After creating a new provisioning profile with those capabilities enabled, when I try and build in xcode (16.4) using that Profile I get an error stating: "Provisioning profile "CreateMoreFamilyControlsv2" doesn't include the com.apple.developer.deviceactivity and com.apple.developer.deviceactivity.reporting entitlements" I've confirmed bundle identifier matches, Team etc Similarly when i do automatic signing see 3rd screenshot. Not sure what to do at this point, I've heard deviceActivity is automatically applied when family controls is approved but still running into this issue.

I am receiving an entitlement error from stripe terminal SDK when integrating Tap to Pay from apple in the info.plist. Im hoping that someone can give me their input on my error output rather than diving into the stripe sdk to point me in the right direction of something I may have missed with entitlements. I have been approved for tap to pay entitlement and am following the instructions here from apple: https://developer.apple.com/documentation/proximityreader/setting-up-the-entitlement-for-tap-to-pay-on-iphone com.apple.developer.proximity-reader.tap-to-pay

Hi, I just released a new version of an app that was transferred from another developer account. The previous version of this app used the App Groups feature to store some important data, and I would like to retrieve that data. In the new version, I’m using the same bundle identifier and the same App Group ID (which has already been deleted from the original developer account). I also added the App Groups entitlement in the project settings and set the same App Group ID. However, I still cannot access the data in the App Group. From the documentation and issues I’ve found, it seems that an app should still have permission to access the same App Group after being transferred. Did I miss something? Thanks!

The problem is described in full with log output in #16844 We are having an issue with TCC prompting users for access to the app group container despite signing with entitlements following all guidelines. This is a regression from the Feb 2025 Changes discussed in App Groups: macOS vs iOS: Working Towards Harmony The problem can only be reproduced with Xcode 16.0 and later. The entitlements for the app include access for the group container with [Key] com.apple.security.application-groups [Value] [Array] [String] G69SCX94XU.duck The documentation notes the group name can be arbitrary, e.g. <team identifier>.<group name>. Cyberduck uses G69SCX94XU.duck by default. Interestingly enough the alert is not shown when a group name matching the bundle identifier is used, e.g. G69SCX94XU.ch.sudo.cyberduck.