Hi, It would be sure if Apple creates a Fgima plug in to convert designs to SwiftUI, no one can do it like Apple and it would be SUPER and super time saving ! -- Kind Regards

In Apple Music I opened fullscreen for a song and I accidentally clicked some keys and the name and artist name of the song I was playing disappeared, and I can't figure out how to get it back, it temporarily comes back when I hover over the top bar but I can not get it to stay there permanently.

I use swiftui to build apps on iPhone and iPad. There is no problem with the iPhone app. The game display is fully shown on iPhone. However, for the iPad, the game display is not shown and the screen goes black. I had to tap the button on the upper left side.(looks like a side view button) After that, the game display is only shown in the left side in a very small size. How can I make the game display fully shown in the iPad?

Existing smartphones store multiple NFC card information. When the NFC antenna of the phone is close to the card reader, it is usually necessary to open the APP to select NFC card information or default to one card information to be transmitted to the card reader. It is not possible to quickly select or switch cards among multiple cards. For example, after using the NFC function to swipe the subway card, the phone needs to open the car access control and community access control again. It is necessary to open the mobile NFC card information management APP to select the community access control card and then swipe the mobile NFC access control, which causes inconvenience. （现有的智能手机存储多个 NFC 卡信息。当手机的NFC天线靠近读卡器时，通常需要打开APP选择NFC卡信息或默认一个卡信息传输到读卡器。无法在多张卡之间快速选择或切换卡。例如，使用NFC功能刷完地铁卡后，手机需要重新打开车内门禁和小区门禁。需要打开手机NFC卡信息管理APP选择社区门禁卡，然后刷手机NFC门禁，造成不便。） Divide the smartphone screen into multiple areas, and users can freely define corresponding NFC information for each area. When the screen is turned off and not unlocked, select NFC card information by pressing different screen areas with your fingers. When the mobile NFC is close to the card reader, the selected card information will be transmitted to the reader(将智能手机屏幕划分多个区域，每个区域手机用户可以自由定义对应NFC信息。在熄屏’不解锁的情况下，通过手指按压不同屏幕区域选择NFC卡片信息，手机NFC贴近读卡器时将选择的卡片信息传递给读卡器。) Below, the method will be further explained in conjunction with the accompanying drawings and embodiments. Figure 1 is a schematic diagram of a utility model; Figure 2 is the flowchart of the present utility model; NFC reader, 2. Mobile screen partition, 3. NFC signal in Figure 1. In Figure 2, 1. Press the area of the screen partition with your finger. 2. Place the phone close to the NFC reader. 3. The phone senses the returned NFC signal. 4. The phone detects the pressed area.（ 下面结合附图和实施例对方法进一步说明。 图1为实用新型示意图； 图2为本实用新型流程图； 图1中1.NFC读取器，2.手机屏幕分区，3.NFC信号。 图2中1.手指按压屏幕分区的区域2.手机贴近NFC读取器3.手机感应到返回的NFC信号4.手机检测到按压的区域，5.是否检测到手机用户按压区域的动作，6.检测到按压区域，根据按压区域做出匹配相对应的NFC的动作7.选择用户所需的NFC卡8.NFC卡收到信息并发出卡片信息9.NFC读卡器收到NFC卡的信息。） For example, a smartphone user has N NFC virtual cards in their phone. Users can divide the smartphone screen into N areas, distinguished as A area, B area, C area..., each area controls different NFC. When a smartphone user holds down the B area that controls NFC (such as virtual access cards) and brings the phone close to the NFC card reader (such as access control). The mobile phone will sense NFC signals (access control signals), triggering the phone to detect the area that the user is pressing. There are two possibilities. Firstly, if the user's pressing action is not detected, the NFC card corresponding to the default A zone (set as the default here) will be selected. If the user's pressing action is detected and it is detected that the pressing is in Zone B (the partition corresponding to the access card), then the NFC information corresponding to Zone B is triggered. The smartphone receives this message, and the corresponding NFC sends out a card message. The NFC card reader (access control device) receives the message and reacts (door opens).（例如，一智能手机用户手机中有N个NFC虚拟卡。用户可以将智能手机屏幕分为N个区域，分辨为A区、B区、C区······，每个区域分别控制不同的NFC。当智能手机用户按住控制NFC（如虚拟门禁卡）的B区域并将手机靠近NFC读卡器（如门禁）。手机将会感应到NFC信号（门禁信号），触发手机检测用户正在按压的区域。有两种可能性，第一没有检测到用户的按压动作则选择默认的A区（这里把A区设为默认）所对应的NFC卡。第二检测到用户的按压动作并检测出按压的是B区域（门禁卡所对应的分区），则触发B区域所对应的NFC信息。智能手机收到此信息，相对应的NFC发出卡片信息，NFC读卡器（门禁设备）收到信息，做出反应（门打开）。） 图1 image1 图2 image2

I have an app that displays a MapView. While I am in light mode everything is fine. I can scroll around the map and my overlays (made by UIVisualEffectView containing an UIGlassEffect) stay light and look well! As soon as I change my phone to dark mode, depending on what's underneath the buttons (a light residential area or darker wooded areas) some of my buttons change color. But not all, only where it's supposedly lighter or darker underneath. This makes my whole UI look strange. Some buttons bright, some dark. Is there a way to lock a "color" or interfaceStyle to the effects-view? In light mode everything is fine, but in dark mode it just looks super strange.

As the title indicates the problem, the large title is shown but the small title in Navitation Bar view is not shown when scrolled up with iOS26 beta7. It works with iOS18 or earlier. Is this iOS26 bug?

I am developing an app that requires calling the iPhone's Face ID module to scan users' facial data. Where can I find Apple's design resources and guidelines for Face ID? The Face ID resources available in Figma are incomplete, and I need more support. For example, in the iPhone settings, the scenario: the UI interface for scanning the user's face to collect data, specifically the circular design in the "How to Set Up Face ID" screen.

I've noticed that the App Store app tends to make the selected tab indicator darker on light mode and lighter on dark mode. Is there any easy way to ensure better legibility out of the box with Tab View (SwiftUI) when using the tint modifier with custom colors?

Here is my code and the error code being generated during build. let myString : String = "https://www.alphavantage.co/query?function=TIME_SERIES_DAILY&symbol=AAPL&apikey= D5GY7HKODE66G0T9" var banjo = URL(string: myString) let task = URLSession.shared.dataTask(with:banjo ) { myDatastring , response , error in} // task.resume() I've tested that URL in my browser and it works. But when I try to build I get: Value of optional type 'URL?' must be unwrapped to a value of type 'URL' Please tell me what I'm doing wrong. I think the URL struct is not returning a URL type of object.

Hello, I have used CPPointOfInterestTemplate for displaying data and as user scrolls using the up/down arrow, I do not see any change in the map. Is there a way to highlight the POIs as the user scrolls through the list? I need to use the map controls and zoom to check the markers on the map. Is it possible to set the zoom level of the map in CarPlay? Pls suggest on the above queries

Bonjour à tous, je voudrais savoir comment avance mon dossier sur les applications que j’ai créé,comment puis-je faire? Et sinon quelqu’un connaît-il la Durée exacte quand APPLE envoie le code de vérification pour mes applicationà!???

I've been beating my head against the wall over a scrollview issue where the top and bottom are cut off in landscape mode. Portrait mode - everything runs swimmingly. The moment I flip the iPad on its side, though, I lose about a quarter of the view on the top and bottom. I thought this was something to do with framing or such; I ran through a myriad of frame, padding, spacer, geometry...I set it static, I set it to dynamically grow, I even created algorithms to try to figure out how to set things to the individual device. Eventually, I separated the tablet and phone views as was suggested here and on the Apple dev forums. That's when I started playing around with the background image. Right now I have.... ZStack { Image("background") .resizable() .scaledToFill() .ignoresSafeArea() ScrollView { VStack(spacing: 24) {.... The problem is the "scaledToFill". In essence, whenever THAT is in the code, the vertical scrollview goes wonky in landscape mode. It, in essence, thinks that it has much more room at the top and the bottom because the background image has been extended at top and bottom to fill the wider screen of the iPad in landscape orientation. Is there any way to get around this issue? The desired behavior is pretty straightforward - the background image fills the entire background, no white bars or such, and the view scrolls against it.

Dear Apple Innovation Team, I have a game-changing iPhone concept and want Apple to explore it first. 📱 iPhone 18 – The First True Portless iPhone No ports – MagSafe 2.0 with high-speed data transfer. Under-display Face ID & Camera – No security compromise. Seamless OLED Display – No interruptions, just pure screen. 📂 iPhone 20 – The Perfect Foldable Crease-free foldable design – Apple perfects what others failed to. Optimized iOS for foldables – Smooth UI & app integration. Apple leads the foldable market. 🚀 Why This Matters: Apple can set a new standard & dominate both innovations. Looking forward to your response. Best, Saksham Sethi

Hi everyone, I’m having trouble getting the new glassEffect() modifier to render correctly in SwiftUI. No matter what I try, it just appears as a solid white background (instead of translucent glass). This happens both in Beta 1 and Beta 2. My setup: • Mac mini (M4 chip) • macOS 15 Beta 2 (Tahoe) • Xcode 16 Beta 2 • Samsung Odyssey G9 57” monitor (super ultrawide) • Using Preview in SwiftUI (not the Simulator) Even when I use Apple’s default demo code like: Text("Hello World") .padding() .glassEffect()

I'm programming my constraints in my video game, which is working good so far until I ran into my most important interactive storyboard. I have three buttons that move back and forth on the Y position each time they are hit. The buttons Y positions only change to view.safeAreaLayoutGuide.centerYAnchor, constant: 100 or view.safeAreaLayoutGuide.centerYAnchor, constant: 200 or view.safeAreaLayoutGuide.centerYAnchor, constant: 300 The strange part is the button that is in the Y 100 stays visible and I can hit the button that is in the Y 100. The buttons in the Y 200 and Y 300 positions are visible until after one or two hits, then the button that is in Y 300 position disappears, then after another hit or two the button that is in the Y 200 position disappears but the button that is in the Y 100 is still visible. I cleared all my constraints to narrow it down to clear view of the constraints that is causing the problem. I do not think this Log Noise. Below is the error log: load_eligibility_plist: Failed to open //private/var/db/os_eligibility/eligibility.plist: Operation not permitted(1) 1 Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7610 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 100 (active)>", "<NSLayoutConstraint:0x302acb480 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302acb480 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)> Make a symbolic breakpoint at UIViewAlertForUnsatisfiableConstraints to catch this in the debugger. The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKitCore/UIView.h> may also be helpful. Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7750 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)>", "<NSLayoutConstraint:0x302acb5c0 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 100 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302aa7750 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)> Make a symbolic breakpoint at UIViewAlertForUnsatisfiableConstraints to catch this in the debugger. The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKitCore/UIView.h> may also be helpful. Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7890 UIButton:0x10c257c00.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)>", "<NSLayoutConstraint:0x302acb700 UIButton:0x10c257c00.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302aa7890 UIButton:0x10c257c00.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)> Make a symbolic breakpoint at UIViewAlertForUnsatisfiableConstraints to catch this in the debugger. The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKitCore/UIView.h> may also be helpful. 3 Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7610 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 100 (active)>", "<NSLayoutConstraint:0x302acb480 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302acb480 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)> Make a symbolic breakpoint at UIViewAlertForUnsatisfiableConstraints to catch this in the debugger. The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKitCore/UIView.h> may also be helpful. Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7750 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)>", "<NSLayoutConstraint:0x302acb5c0 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 100 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302aa7750 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)>

Hi, I have the following code, which for some reason is not working as expected. I have an .onAppear and a .task function that isn't running, which I can see isn't running because nothing is printing. Any guidance would be greatly appreciated. Thank you. struct ContentView: View { var body: some View { ZStack { switch view { case .view1: View1() case .view2: View2() case .view3: View3() case .view4: View4() case .view5: View5() default: SubscriptionStoreView(groupID: "") } } .onAppear() { view = .view6 print("test 1") } .task { print("test") await refreshPurchasedProducts() } } func refreshPurchasedProducts() async { // Iterate through the user's purchased products. for await verificationResult in Transaction.currentEntitlements { switch verificationResult { case .verified(let transaction): print("verified") case .unverified(let unverifiedTransaction, let verificationError): print("unverified") default: print("default") } } } }

The brand new animation in Stage Manager greatly reduced dizziness. However, don’t know why it ONLY applies when no window was presented. What would be the problem elsewhere? Stage Manager is one of pretty few motion pictures that annoyed me and forced me to turn on Reduce Motion, or stop using Stage Manager. Big pity… macOS 26.0 (25A5346a) wont use ipad to post…

At WWDC25 we launched a new type of Lab event for the developer community - Group Labs. A Group Lab is a panel Q&A designed for a large audience of developers. Group Labs are a unique opportunity for the community to submit questions directly to a panel of Apple engineers and designers. Here are the highlights from the WWDC25 Group Lab for Design. Can you expand on how Liquid Glass helps with navigation and focus in the UI? Liquid Glass clarifies the navigation layer by introducing a single, floating pane that acts as the primary navigation area. Buttons within this pane seamlessly morph as you move between sections, and controls can temporarily lift into the glass surface. While avoiding excessive use of glass (like layering glass on glass), this approach simplifies navigation and strengthens the connection between menus, alerts, and the elements that trigger them. What should I do with customized bars that I might have in my app? Reconsider the content and behavior of customized bars. Evaluate whether you need all the buttons and whether a menu might be a better solution. Instead of relying on background colors or styling, express hierarchy through layout and grouping. This is a good opportunity to adopt the new design language and simplify your interface. What are scroll edge effects, and what options do we have for them? Scroll edge effects enhance legibility in controls by lifting interactive elements and separating them from the background. There are two types: a soft edge effect (a subtle blur) and a hard edge effect (a more defined boundary for high-legibility areas like column sorting). Scroll edge effects are designed to work seamlessly with Liquid Glass, allowing content to feel expansive while ensuring controls and titles remain legible. How can we ensure or improve accessibility using Liquid Glass? Legibility is a priority, and refinements are ongoing throughout the betas. Liquid Glass adapts well to accessibility settings like Reduce Transparency, Increase Contrast, and Reduce Motion. There are two variants of glass: regular glass, designed to be legible by default, and clear glass, used in places like AVKit, which requires more care to ensure legibility. Use color contrast tools to ensure contrast ratios are met. The Human Interface Guidelines (HIG) are a living document offering best practices. The colors and materials pages are key resources. Do you have any recommendations for convincing designers concerned with consistency across Android and Web to use Liquid Glass? Start small and focus on high-utility controls that don't significantly impact brand experience. Native controls offer familiarity and predictability to users. Using the native controls makes sure your app feels at home on the device. Using native frameworks provides built-in accessibility support (dynamic type, reduce transparency, increase contrast). Native controls come with built-in behaviors and interactions. Can ScrollViews include Liquid Glass within them? You can technically put a glass layer inside a scroll view, but it can feel heavy and doesn't align with the system's intention for Liquid Glass to serve as a fixed layer. Think of the content layer as the scrolling layer, and the navigational layer as the one using Liquid Glass. If there is glass on the content layer it will collide into the navigational layer. What core design philosophy guided the direction of iOS 26, beyond the goal of unification? The core design philosophy involved blurring the line between hardware and software, separating UI and navigation elements from content, making apps adaptable across window sizes, and combining playfulness with sophistication. It was about making the UI feel at home on rounded screens. Can we layer Liquid Glass elements on top of each other? Avoid layering Liquid Glass elements directly on top of each other, as it creates unnecessary visual complexity. The system will automatically convert nested glass elements to a vibrant fill style. Use vibrant fills and labels to show control shapes and ensure legibility. Opaque grays should be avoided in favor of vibrant colors, which will multiply with the backgrounds correctly. What will happen to apps that use custom components? Should they be adapted to the new design within the next year? The more native components you use, the more things happen for free. Standard components will be upgraded automatically. Look out for any customizations that might clash. Think about what is the minimum viable change, where your app still feels and looks very similar to what it did. Prioritize changes in core workflows and navigational areas. There are a number of benefits to using native components including user familiarity, built-in accessibility support, and built-in behaviors and interactions. Will Apple be releasing Figma design templates? Sketch kits were published on Monday and can be referenced. The goal is to ensure the resources are well-organized, well-named, and easy to use. It's a high priority.

Hello Apple Developers i am here write down my experience with the IOS 26 Beta first off i would like to say that i kind of do/don't like the new iquid glass UI/UIX Designs in some parrts of the ios like in m ust 3rd Party Apps like Uber Lyrith MJ Access Link Moblie app DoorDash VLC And Apple Music App just to name of few since i have installed the beta i have ran into a few bugs i have alread sent to the feeback app via iphone but i'm going to write them here as will i'm not looking for troubleshoots or tech support i'm just shareing my experience with the apple community and the Apple Development/Enginer Team to fine tone for release Time please note that i am a user with Vision impairment so please by respect to me due to my writteing issues and grammer and spelling so here i go my first bug that i ran into on the first day was when i was listening to some music trakcs in the apple muisc app when scrolling down or up fast the app will froze for mill secend then contiune as noraml my second bug that i ran into dureing music play was with my Crossfade settings not working on some tracks im not sure if this is due to BMP alignment or AI algorithm integration with in the software itseif but for me this takes me out of the listening experince that i have when i enjoy listening to music My suggestion Move the AutoMix and Crossfade Settings in to the Apple Music its seif and give the user more controll over how long or how short they want the crossfade or autmix to happen dureing the ending of each tracked play also for the cross fade option is set at 12 increase this to 30 secs or more if possiable or add an BPM options for the Automix to mix in the next track via BMP for simple of my rock track is at 148 BMP the next track should be pop or kpop or rap synceing up with that same BMP speed or similar at 148 BMP my next suggestion for the Apple Music App Shameless track mode (this mode to can be Incorporated) in to the Automix Featrue this redue some music tracks that ends abruptly some MP3 tracks added outside of the Apple Music App seems to broke dureing playback My 3rd bug that i ran in to with the Glass UI for controll Center like i stated before i am Vision impaired with the clear Glass over lapping the current UI for me this hard for me to tell what icons i am looking atside from the Voolum and Brightness Bars i am asking please make this more dark theme and make the icons brigher or add name undernearth the icons or Flip the Dark them or dan the current UI over lapping the Controlor center or add White colors with Black Arrows/icons for all Apple App that has this Glass UI in side of cause this is driving me nuts My 4th Bug that i ran into was with the lock screen/restart/reboot ohh girl where do i began with this one let's with the notifications i don't know who through it was a good idea to have a Clear Bright UI over lapping the Notifications this is very annoying via imessage Texting cause my custom wallpaper Blends in with a white background and this is Worst My suggestion for this is very simple darkering the background on the lock screen abit more so the text is more reader or increase the Notification bars (this is for users like myseif that use Dark mode) My 5th Bug involves my Back ups/Restore/Corrupated < is seif explanatory when i tryed to downgrand back to Version 18.5/18.6 nothing happened so please fix this or make it a bit more easyer for users to be able to back up/Retore their Devices now i has to wait until (Tomttow morning Friday) to factory reset my phone my conclusion since Beta Users and Developers and Engiers are Still testing please take look at my suggestion and try to bring not all but some of them in to public Release Thank You! Update i would like to Downgrad from IOS 26 Developer Beta back to IOS 18.5

Hi everyone, I’m having trouble getting the new glassEffect() modifier to render correctly in SwiftUI. No matter what I try, it just appears as a solid white background (instead of translucent glass). This happens both in Beta 1 and Beta 2. My setup: • Mac mini (M4 chip) • macOS 26 Beta 2 (Tahoe) • Xcode 26 Beta 2 • Samsung Odyssey G9 57” monitor (super ultrawide) • Using Preview in SwiftUI, I use IOS 26 Beta 2 (not the Simulator) Even when I use Apple’s default demo code like: Text("Hello World") .padding() .glassEffect()