Hi, I'm currently developping an AVB hardware device, and I'm currently stuck because because the apple AVB stack is throwing me errors without much informations. Is there any way to have more information about these assertions and why they are happening ? Furtermore is there any documentation on theAppleAVBAudio module ? It would be very handy Here are the logs shown in the console: Filtering the log data using "process == "coreaudiod"" Timestamp Thread Type Activity PID TTL 2025-12-05 15:44:27.087043+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.087545+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.088043+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.088546+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.089043+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.089545+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.090043+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.090545+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.091043+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.091545+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.092044+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.092544+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.093044+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.093552+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.094050+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533 2025-12-05 15:44:27.094543+0100 0x15ae74 Default 0x0 12965 0 coreaudiod: (AppleAVBAudio) Assert: <private> (value 0x0 0), <private> file: <private>, line: 1533

My app utilizes background audio to play music files. I have the audio background mode enabled and I initialize the AVAudioSession in playback mode with the mixWithOthers option. And it usually works great while the app is backgrounded. I listen for audio interruptions as well as route changes and I am able to handle them appropriately and I can usually resume my background audio no problem. I discovered an issue while connected to CarPlay though. Roughly 50% of the time when I disconnect from a phone call while connected to CarPlay I get the following error after calling the play() method of my AVAudioPlayer instance: "ATAudioSessionClientImpl.mm:281 activation failed. status = 561015905" If I instead try to start a new audio session I get a similar error: Error Domain=NSOSStatusErrorDomain Code=561015905 "Session activation failed" UserInfo={NSLocalizedDescription=Session activation failed} Like I said, this isn't reproducible 100% of the time and is so far only seen while connected to CarPlay. I don't think Im forgetting so additional capability or plist setting, but if anyone has any clues it would be greatly appreciated. Otherwise this is likely just a bug that I need to report to Apple. One very important note, and reason I believe it's just a bug, is that while I was testing I found that other music apps like Spotify will also fail to resume their audio at the same time my app fails. Another important detail is that when it works successfully I receive the audio session interruption ended notification, and when it doesn't work I only receive a route configuration change or route override notification. From there I am able to still successfully granted background time to execute code, but my call to resume audio fails with the above mentioned error codes.

The sysEx struct in the MIDIUniversalMessage struct has a channel member but the System Exclusive (7-Bit) Message doesn't have a channel field. The System Exclusive (7-Bit) Message has a # of bytes field but the sysEx struct doesn't have a nrOfBytes, byteCount or bytesUsed member. It looks like the channel member of the sysEx struct contains the number of used bytes. Is this a mistake in the header or did I misunderstand something?

Hello. My app uses AVAudioRecorder to generate recording files, which are consistently only 4kb in size. Most users generate audio files normally, with only a few users experiencing this phenomenon occasionally. After uninstalling and installing the app, it will work normally, but it will reappear after a period of time. I have compared that the problematic audio files generated each time are fixed and cannot be played. Added the audioRecorderDidFinishRecording proxy method, which shows that the recording was completed normally. The user also reported that the recording is normal, but there is a problem with the generated file. How should I handle this issue? Look forward to your reply. - (void)startRecordWithOrderID:(NSString *)orderID { AVAudioSession *audioSession = [AVAudioSession sharedInstance]; [audioSession setCategory:AVAudioSessionCategoryRecord error:nil]; [audioSession setActive:YES error:nil]; NSMutableDictionary *settings = [[NSMutableDictionary alloc] init]; [settings setObject:[NSNumber numberWithFloat: 8000.0] forKey:AVSampleRateKey]; [settings setObject:[NSNumber numberWithInt: kAudioFormatLinearPCM] forKey:AVFormatIDKey]; [settings setObject:[NSNumber numberWithInt:16] forKey:AVLinearPCMBitDepthKey]; [settings setObject:[NSNumber numberWithInt: 1] forKey:AVNumberOfChannelsKey]; [settings setObject:[NSNumber numberWithBool:NO] forKey:AVLinearPCMIsBigEndianKey]; [settings setObject:[NSNumber numberWithBool:NO] forKey:AVLinearPCMIsFloatKey]; NSString *path = [WDUtility createDirInDocument:@"audios" withOrderID:orderID withPathExtension:@"wav"]; NSURL *tmpFile = [NSURL fileURLWithPath:path]; recorder = [[AVAudioRecorder alloc] initWithURL:tmpFile settings:settings error:nil]; [recorder setDelegate:self]; [recorder prepareToRecord]; [recorder record]; }

I'm developing a TTS Audio Unit Extension that needs to write trace/log files to a shared App Group container. While the main app can successfully create and write files to the container, the extension gets sandbox denied errors despite having proper App Group entitlements configured. Setup: Main App (Flutter) and TTS Audio Unit Extension share the same App Group App Group is properly configured in developer portal and entitlements Main app successfully creates and uses files in the container Container structure shows existing directories (config/, dictionary/) with populated files Both targets have App Group capability enabled and entitlements set Current behavior: Extension can access/read the App Group container Extension can see existing directories and files All write attempts are blocked with "sandbox deny(1) file-write-create" errors Code example: const char* createSharedGroupPathWithComponent(const char* groupId, const char* component) { NSString* groupIdStr = [NSString stringWithUTF8String:groupId]; NSString* componentStr = [NSString stringWithUTF8String:component]; NSURL* url = [[NSFileManager defaultManager] containerURLForSecurityApplicationGroupIdentifier:groupIdStr]; NSURL* fullPath = [url URLByAppendingPathComponent:componentStr]; NSError *error = nil; if (![[NSFileManager defaultManager] createDirectoryAtPath:fullPath.path withIntermediateDirectories:YES attributes:nil error:&amp;error]) { NSLog(@"Unable to create directory %@", error.localizedDescription); } return [[fullPath path] UTF8String]; } Error output: Sandbox: simaromur-extension(996) deny(1) file-write-create /private/var/mobile/Containers/Shared/AppGroup/36CAFE9C-BD82-43DD-A962-2B4424E60043/trace Key questions: Are there additional entitlements required for TTS Audio Unit Extensions to write to App Group containers? Is this a known limitation of TTS Audio Unit Extensions? What is the recommended way to handle logging/tracing in TTS Audio Unit Extensions? If writing to App Group containers is not supported, what alternatives are available? Current entitlements: &lt;dict&gt; &lt;key&gt;com.apple.security.application-groups&lt;/key&gt; &lt;array&gt; &lt;string&gt;group.com.&lt;company&gt;.&lt;appname&gt;&lt;/string&gt; &lt;/array&gt; &lt;/dict&gt;

Hi there! We have a suite of AudioUnit v2 plugins that have been shipped for some time as aufx plugins, and we are looking into MIDI-related platform upgrades, so we need a way to update these plugins to request MIDI from Logic (and other AU hosts) but avoid changing our AU type and subtype so we don't break existing sessions. Any ideas on how we can do this?

According to the header file the outputVolume properties supported range is 0.0-1.0: /*! @property outputVolume @abstract The mixer's output volume. @discussion This accesses the mixer's output volume (0.0-1.0, inclusive). @property (nonatomic) float outputVolume; However when setting the volume to 2.0 the audio does indeed play louder. Is the header file out of date and if so, what is the supported range for outputVolume? Thanks

I prefer to use the album fetched from the library instead of the catalog since this is faster. If doing so, how can I check if all tracks of an album are added to the library. In this case I'd like to fetch the catalog version or throw an error (for example when offline). Using .with(.tracks) on the library album fetches the tracks added to the library. The trackCount property is referring to the tracks that can be fetched from the library. The isComplete property is always nil when fetching from the library. One possible way is checking the trackNumber and discCount properties. However this only detects that not all tracks of an album are added to the library if there is a song not added ahead of one that is. I'd like to be able to handle this edge case as well. Is there currently a way to do this? I'd prefer to not rely on the apple music catalog for this since this is supposed to work offline as well. Fetching and storing all trackIDs when connected and later comparing against these would work, but this would potentially mean storing tens of thousands of track ids. Thank you

Hello, I'm trying to receive parquet files using the example that provided in documentation. I've done all required steps but receive constantly error 500 with "Upstream Service Error". By looking into the issues list, seems this error exists for months. Is it possible to get it working?

My current app implements a custom video player, based on a AVSampleBufferRenderSynchronizer synchronising two renderers: an AVSampleBufferDisplayLayer receiving decoded CVPixelBuffer-based video CMSampleBuffers, and an AVSampleBufferAudioRenderer receiving decoded lpcm-based audio CMSampleBuffers. The AVSampleBufferRenderSynchronizer is started when the first image (in presentation order) is decoded and enqueued, using avSynchronizer.setRate(_ rate: Float, time: CMTime), with rate = 1 and time the presentation timestamp of the first decoded image. Presentation timestamps of video and audio sample buffers are consistent, and on most streams, the audio and video are correctly synchronized. However on some network streams, on iOS, the audio and video aren't synchronized, with a time difference that seems to increase with time. On the other hand, with the same player code and network streams on macOS, the synchronization always works fine. This reminds me of something I've read, about cases where an AVSampleBufferRenderSynchronizer could not synchronize audio and video, causing them to run with independent and potentially drifting clocks, but I cannot find it again. So, any help / hints on this sync problem will be greatly appreciated! :)

Two issues: No matter what I set in try audioSession.setPreferredSampleRate(x) the sample rate on both iOS and macOS is always 48000 when the output goes through the speaker, and 24000 when my Airpods connect to an iPhone/iPad. Now, I'm checking the current output loudness to animate a 3D character, using mixerNode.installTap(onBus: 0, bufferSize: y, format: nil) { [weak self] buffer, time in Task { @MainActor in // calculate rms and animate character accordingly but any buffer size under 4800 is just ignored and the buffers I get are 4800 sized. This is ok, when the sampleRate is currently 48000, as 10 samples per second lead to decent visual results. But when AirPods connect, the samplerate is 24000, which means only 5 samples per second, so the character animation looks lame. My AVAudioEngine setup is the following: audioEngine.connect(playerNode, to: pitchShiftEffect, format: format) audioEngine.connect(pitchShiftEffect, to: mixerNode, format: format) audioEngine.connect(mixerNode, to: audioEngine.outputNode, format: nil) Now, I'd be fine if the outputNode runs at whatever if it needs, as long as my tap would get at least 10 samples per second. PS: Specifying my favorite format in the let format = AVAudioFormat(standardFormatWithSampleRate: 48_000, channels: 2)! mixerNode.installTap(onBus: 0, bufferSize: y, format: format) doesn't change anything either

My app - natively iOS but built with the "Designed for iPad" option to run on Mac - does not recognise an attached USB microphone when running on a Mac. This line int32_t items = (int32_t) [[[AVAudioSession sharedInstance] availableInputs] count ]; returns 1, which is the Mac internal mic. On iPad and iPhone it sees both the internal mic and the USB mic. Is this an inherent "Designed for iPad" restriction, and is there some trick I can pull to get the USB microphone to be recognised by the system?

I'm developing an iOS app that requires continuous audio recording. Currently, when a phone call comes in, the AVAudioSession is interrupted and recording stops completely during the ringing phase. While I understand recording should stop if the call is answered, my app needs to continue recording while the phone is merely ringing. I've observed that Apple's Voice Memos app maintains recording during incoming call rings. This indicates the hardware and iOS are capable of supporting this functionality. Request Please advise on any available AVAudioSession configurations or APIs that would allow my app to: Continue recording during an incoming call ring Only stop recording if/when the call is actually answered Impact This interruption significantly impacts the user experience and core functionality of my app. Workarounds like asking users to enable airplane mode are impractical and create a poor user experience. Questions Is there an approved way to maintain microphone access during call rings? If not currently possible, could this capability be considered for addition to a future iOS SDK? Are there any interim solutions or best practices Apple recommends for this use case? Thank you for your help. SUPPORT INFORMATION Did someone from Apple ask you to submit a code-level support request? No Do you have a focused test project that demonstrates your issue? Yes, I have a focused test project to submit with my request What code level support issue are you having? Problems with an Apple framework API in my app

After upgrading to watchOS 26, users report that when playing music on Apple Watch, if a fitness reminder is received, the music automatically pauses and users need to manually tap the play button to resume music playback. This phenomenon occurs with multiple music and podcast apps. This issue did not exist before the upgrade. We would like to know if this is an Apple bug or if there are any special development configurations needed?"

Hi everyone, I’m testing audio recording on an iPhone 15 Plus using AVFoundation. Here’s a simplified version of my setup: let settings: [String: Any] = [ AVFormatIDKey: Int(kAudioFormatLinearPCM), AVSampleRateKey: 8000, AVNumberOfChannelsKey: 1, AVLinearPCMBitDepthKey: 16, AVLinearPCMIsFloatKey: false ] audioRecorder = try AVAudioRecorder(url: fileURL, settings: settings) audioRecorder?.record() When I check the recorded file’s sample rate, it logs: Actual sample rate: 8000.0 However, when I inspect the hardware sample rate: try session.setCategory(.playAndRecord, mode: .default) try session.setActive(true) print("Hardware sample rate:", session.sampleRate) I consistently get: `Hardware sample rate: 48000.0 My questions are: Is the iPhone mic actually capturing at 8 kHz, or is it recording at 48 kHz and then downsampling to 8 kHz internally? Is there any way to force the hardware to record natively at 8 kHz? If not, what’s the recommended approach for telephony-quality audio (true 8 kHz) on iOS devices? Thanks in advance for your guidance!

Hello, The search functionality of the coreaudio-api mailing list archive has been broken for a very long time. Several of the lower-level audio APIs have only been discussed on this mailing list, making it critical for those of us maintaining old audio code. Steps to reproduce: Open https://lists.apple.com/archives/list/coreaudio-api@lists.apple.com/ in your web browser. Enter a search term in the "Search this list" field in the top-right corner of the page. The search will eventually time out with "502 Bad Gateway" Can somebody please forward this information to the current maintainer? I've tried to contact developer support but they weren't sure what to do. Thanks!

Hi everyone! I’ve developed a location-based Audio AR app in Unity with FMOD &amp; Resonance Audio and AirPods Pro Head-Tracking to create a ubiquitous augmented soundscape experience. Think of it as an audio version of Pokémon Go, but with a more precise location requirement to ensure spatial audio is placed correctly. I want this experience to run in the background on iOS, but from what I’ve gathered, it seems Unity doesn’t support this well. So, I’m considering developing a Swift version instead. Since this is primarily for research purposes, privacy concerns are not a major issue in my case. However, I’ve come across some potential challenges: Real-time precise location updates – Can iOS provide fully instantaneous, high-accuracy location updates in the background? Continuous real-time data processing – Can an app continuously process spatial audio, head-tracking, and location data while running in the background? I’m not sure if newer iOS versions have improved in these areas or if there are workarounds to achieve this. Would this kind of experience be feasible to run in the background on iOS? Any insights or pointers would be greatly appreciated! I’m very new to iOS development, so apologies if this is a basic question. Thanks in advance!

Many Apple users own both Bluetooth earphones (AirPods) and traditional wired earphones. While Bluetooth audio provides freedom of movement, some users still prefer wired earphones for comfort, sound profile, or personal preference. However, plugging wired earphones directly into an iPhone can feel restrictive and inconvenient during daily use. This proposal suggests a hybrid audio approach where wired earphones can be connected to a Bluetooth-enabled AirPods charging case (or a similar Apple-designed module), allowing users to enjoy wired earphones without a physical connection to the iPhone. #Problem Statement *Wired earphones offer consistent audio quality and zero latency *Bluetooth earphones provide freedom from cables *Users must currently choose one or the other *Plugging wired earphones into an iPhone limits movement and can feel intrusive in daily scenarios (walking, commuting, working) There is no native Apple solution that allows wired earphones to function wirelessly while maintaining Apple’s audio experience standards. #Proposed Solution Introduce a Wired-to-Wireless Audio Mode through the AirPods charging case or a dedicated Apple Bluetooth audio bridge. How it works: User plugs wired earphones into the AirPods case (or a future AirPods accessory port) The case acts as a Bluetooth audio transmitter Audio is streamed wirelessly from iPhone to the case The case outputs audio to the wired earphones #User experiences: No cable connected to the iPhone Familiar wired earphone sound Freedom of movement similar to Bluetooth earbuds User Experience (UX Flow) Plug wired earphones into the AirPods case iPhone automatically detects: “Wired Earphones via AirPods Case” Seamless pairing using existing AirPods framework Audio controls, volume, and switching handled through iOS No additional apps required #Key Benefits Combines wired sound reliability with wireless convenience Reduces physical cable disturbance during use Extends usefulness of existing wired earphones Minimal learning curve for users Fits naturally into Apple’s ecosystem and design philosophy #Privacy & Performance Considerations On-device audio processing only No cloud involvement Low-latency audio using Apple’s proprietary Bluetooth codecs Power-efficient usage leveraging AirPods case battery #Target Users Users who prefer wired earphones but want wireless freedom Commuters and walkers Developers and professionals who multitask Users sensitive to Bluetooth earbud fit or comfort #Ecosystem Fit Builds on existing AirPods pairing and audio stack Aligns with Apple’s focus on seamless UX Could be implemented via: New AirPods hardware Firmware update + accessory Dedicated Apple audio bridge

Using an iPhone Pro 12 running iOS 26.0.1, with AirPods Pro 3. Camera app does capture video with what seems to be "Studio Quality Recording". Am trying to replicate that SQR with my own Camera like app, and while I can pull audio in from the APP3 mic, and my video capture app is recording a 48,000Hz high-bitrate video, the audio still sounds non-SQR. I'm seeing bluetoothA2DP , bluetoothLE , bluetoothHFP as portType, and not sure if SQR depends on one of those? Is there sample code demonstrating a SQR capture? Nevermind video and camera, just audio even? Also, I don't understand what SQR is doing between the APP3 and the iPhone. What codec is that? What bitrate is that? If I capture video using Capture and inspect the audio stream I see mono 74.14 kbit/s MPEG-4 AAC, 48000 Hz. But I assume that's been recompressed and not really giving me any insight into the APP3 H2 transmission?

My app Balletrax is a music player for people to use while they teach ballet. Used to be you could silence notifications during use, but now the customer seems to have to know how to use Focus mode, remember to turn it on and off, and have to check the notifications one does and doesn't want to use. Is there no way to silence all notifications when the app is in use?