Please include the line below in follow-up emails for this request. Case-ID: 11089799 When using AVSpeechUtterance and setting it to play in Mandarin, if Siri is set to Cantonese on iOS 18, it will be played in Cantonese. There is no such issue on iOS 17 and 16. 1.let utterance = AVSpeechUtterance(string: textView.text) let voice = AVSpeechSynthesisVoice(language: "zh-CN") utterance.voice = voice 2.In the phone settings, Siri is set to Cantonese

Hi all, I have been quite stumped on this behavior for a little bit now, so thought it best to share here and see if someone more experience with AVAudioEngine / AVAudioSession can weigh in. Right now I have a AVAudioEngine that I am using to perform some voice chat with and give buffers to play. This works perfectly until route changes start to occur, which causes the AVAudioEngine to reset itself, which then causes all players attached to this engine to be stopped. Once a AVPlayerNode gets stopped due to this (but also any other time), all samples that were scheduled to be played then get purged. Where this becomes confusing for me is the completion handler gets called every time regardless of the sound actually being played. Is there a reliable way to know if a sample needs to be rescheduled after a player has been reset? I am not quite sure in my case what my observer of AVAudioEngineConfigurationChange needs to be doing, as this engine only handles output. All input is through a separate engine for simplicity. Currently I am storing a queue of samples as they get sent to the AVPlayerNode for playback, and after that completion checking if the player isPlaying or not. If it's playing I assume that the sound actually was played- and if not then I leave it in the queue and assume that an observer on the route change or the configuration change will realize there are samples in the queue and reset them Thanks for any feedback!

I’m facing a problem while trying to achieve spatial audio effects in my iOS 18 app. I have tried several approaches to get good 3D audio, but the effect never felt good enough or it didn’t work at all. Also what mostly troubles me is I noticed that AirPods I have doesn’t recognize my app as one having spatial audio (in audio settings it shows "Spatial Audio Not Playing"). So i guess my app doesn't use spatial audio potential. First approach uses AVAudioEnviromentNode with AVAudioEngine. Chaining position of player as well as changing listener’s doesn’t seem to change anything in how audio plays. Here's simple how i initialize AVAudioEngine import Foundation import AVFoundation class AudioManager: ObservableObject { // important class variables var audioEngine: AVAudioEngine! var environmentNode: AVAudioEnvironmentNode! var playerNode: AVAudioPlayerNode! var audioFile: AVAudioFile? ... //Sound set up func setupAudio() { do { let session = AVAudioSession.sharedInstance() try session.setCategory(.playback, mode: .default, options: []) try session.setActive(true) } catch { print("Failed to configure AVAudioSession: \(error.localizedDescription)") } audioEngine = AVAudioEngine() environmentNode = AVAudioEnvironmentNode() playerNode = AVAudioPlayerNode() audioEngine.attach(environmentNode) audioEngine.attach(playerNode) audioEngine.connect(playerNode, to: environmentNode, format: nil) audioEngine.connect(environmentNode, to: audioEngine.mainMixerNode, format: nil) environmentNode.listenerPosition = AVAudio3DPoint(x: 0, y: 0, z: 0) environmentNode.listenerAngularOrientation = AVAudio3DAngularOrientation(yaw: 0, pitch: 0, roll: 0) environmentNode.distanceAttenuationParameters.referenceDistance = 1.0 environmentNode.distanceAttenuationParameters.maximumDistance = 100.0 environmentNode.distanceAttenuationParameters.rolloffFactor = 2.0 // example.mp3 is mono sound guard let audioURL = Bundle.main.url(forResource: "example", withExtension: "mp3") else { print("Audio file not found") return } do { audioFile = try AVAudioFile(forReading: audioURL) } catch { print("Failed to load audio file: \(error)") } } ... //Playing sound func playSpatialAudio(pan: Float ) { guard let audioFile = audioFile else { return } // left side playerNode.position = AVAudio3DPoint(x: pan, y: 0, z: 0) playerNode.scheduleFile(audioFile, at: nil, completionHandler: nil) do { try audioEngine.start() playerNode.play() } catch { print("Failed to start audio engine: \(error)") } ... } Second more complex approach using PHASE did better. I’ve made an exemplary app that allows players to move audio player in 3D space. I have added reverb, and sliders changing audio position up to 10 meters each direction from listener but audio seems to only really change left to right (x axis) - again I think it might be trouble with the app not being recognized as spatial. //Crucial class Variables: class PHASEAudioController: ObservableObject{ private var soundSourcePosition: simd_float4x4 = matrix_identity_float4x4 private var audioAsset: PHASESoundAsset! private let phaseEngine: PHASEEngine private let params = PHASEMixerParameters() private var soundSource: PHASESource private var phaseListener: PHASEListener! private var soundEventAsset: PHASESoundEventNodeAsset? // Initialization of PHASE init{ do { let session = AVAudioSession.sharedInstance() try session.setCategory(.playback, mode: .default, options: []) try session.setActive(true) } catch { print("Failed to configure AVAudioSession: \(error.localizedDescription)") } // Init PHASE Engine phaseEngine = PHASEEngine(updateMode: .automatic) phaseEngine.defaultReverbPreset = .mediumHall phaseEngine.outputSpatializationMode = .automatic //nothing helps // Set listener position to (0,0,0) in World space let origin: simd_float4x4 = matrix_identity_float4x4 phaseListener = PHASEListener(engine: phaseEngine) phaseListener.transform = origin phaseListener.automaticHeadTrackingFlags = .orientation try! self.phaseEngine.rootObject.addChild(self.phaseListener) do{ try self.phaseEngine.start(); } catch { print("Could not start PHASE engine") } audioAsset = loadAudioAsset() // Create sound Source // Sphere soundSourcePosition.translate(z:3.0) let sphere = MDLMesh.newEllipsoid(withRadii: vector_float3(0.1,0.1,0.1), radialSegments: 14, verticalSegments: 14, geometryType: MDLGeometryType.triangles, inwardNormals: false, hemisphere: false, allocator: nil) let shape = PHASEShape(engine: phaseEngine, mesh: sphere) soundSource = PHASESource(engine: phaseEngine, shapes: [shape]) soundSource.transform = soundSourcePosition print(soundSourcePosition) do { try phaseEngine.rootObject.addChild(soundSource) } catch { print ("Failed to add a child object to the scene.") } let simpleModel = PHASEGeometricSpreadingDistanceModelParameters() simpleModel.rolloffFactor = rolloffFactor soundPipeline.distanceModelParameters = simpleModel let samplerNode = PHASESamplerNodeDefinition( soundAssetIdentifier: audioAsset.identifier, mixerDefinition: soundPipeline, identifier: audioAsset.identifier + "_SamplerNode") samplerNode.playbackMode = .looping do {soundEventAsset = try phaseEngine.assetRegistry.registerSoundEventAsset( rootNode: samplerNode, identifier: audioAsset.identifier + "_SoundEventAsset") } catch { print("Failed to register a sound event asset.") soundEventAsset = nil } } //Playing sound func playSound(){ // Fire new sound event with currently set properties guard let soundEventAsset else { return } params.addSpatialMixerParameters( identifier: soundPipeline.identifier, source: soundSource, listener: phaseListener) let soundEvent = try! PHASESoundEvent(engine: phaseEngine, assetIdentifier: soundEventAsset.identifier, mixerParameters: params) soundEvent.start(completion: nil) } ... } Also worth mentioning might be that I only own personal team account

Hi all, with my app ScreenFloat, you can record your screen, along with system- and microphone audio. Those two audio feeds are recorded into separate audio tracks in order to individually remove or edit them later on. Now, these recordings you create with ScreenFloat can be drag-and-dropped to other apps instantly. So far, so good, but some apps, like Slack, or VLC, or even websites like YouTube, do not play back multiple audio tracks, just one. So what I'm trying to do is, on dragging the video recording file out of ScreenFloat, instantly baking together the two individual audio tracks into one, and offering that new file as the drag and drop file, so that all audio is played in the target app. But it's slow. I mean, it's actually quite fast, but for drag and drop, it's slow. My approach is this: "Bake together" the two audio tracks into a one-track m4a audio file using AVMutableAudioMix and AVAssetExportSession Take the video track, add the new audio file as an audio track to it, and render that out using AVAssetExportSession For a quick benchmark, a 3'40'' movie, step 1 takes ~1.7 seconds, and step two adds another ~1.5 seconds, so we're at ~3.2 seconds. That's an eternity for a drag and drop, where the user might cancel if there's no immediate feedback. I could also do it in one step, but then I couldn't use the AV*Passthrough preset, and that makes it take around 32 seconds then, because I assume it touches the video data (which is unnecessary in this case, so I think the two-step approach here is the fastest). So, my question is, is there a faster way? The best idea I can come up with right now is, when initially recording the screen with system- and microphone audio as separate tracks, to also record both of them into a third, muted, "hidden" track I could use later on, basically eliminating the need for step one and just ripping the two single audio tracks out of the movie and only have the video and the "hidden" track (then unmuted), but I'd still have a ~1.5 second delay there. Also, there's the processing and data overhead (basically doubling the movie's audio data). All this would be great for an export operation (where one expects it to take a little time), but for a drag-and-drop operation, it's not ideal. I've discarded the idea of doing a promise file drag, because many apps do not accept those, and I want to keep wide compatibility with all sorts of apps. I'd appreciate any ideas or pointers. Thank you kindly, Matthias

Hello, I have a CarPlay Navigation app and utilize the AVSpeechSynthesizer to speak directions to a user. Everything works great on my CarPlay simulator as well as when plugged into my GMC truck. However, I found out yesterday that one of my users with a Ford truck the audio would cut in an out. After much troubleshooting, I was able to replicate this on my own truck when using Bluetooth to connect to CarPlay. My user was also utilizing Bluetooth. Has anyone else experienced this? Is there a fix to the problem? import SwiftUI import AVFoundation class TextToSpeechService: NSObject, ObservableObject, AVSpeechSynthesizerDelegate { private var speechSynthesizer = AVSpeechSynthesizer() static let shared = TextToSpeechService() override init() { super.init() speechSynthesizer.delegate = self } func configureAudioSession() { speechSynthesizer.delegate = self do { try AVAudioSession.sharedInstance().setCategory(.playback, mode: .voicePrompt, options: [.mixWithOthers, .allowBluetooth]) } catch { print("Failed to set audio session category: \(error.localizedDescription)") } } func speak(_ text: String) { Task(priority: .high) { let speechUtterance = AVSpeechUtterance(string: text) speechUtterance.voice = AVSpeechSynthesisVoice(language: AVSpeechSynthesisVoice.currentLanguageCode()) try AVAudioSession.sharedInstance().setActive(true, options: .notifyOthersOnDeactivation) speechSynthesizer.speak(speechUtterance) } } func speechSynthesizer(_ synthesizer: AVSpeechSynthesizer, didFinish utterance: AVSpeechUtterance) { Task { stopSpeech() try AVAudioSession.sharedInstance().setActive(false) } } func stopSpeech() { speechSynthesizer.stopSpeaking(at: .immediate) } }

iPhoneやiPadにおいて、画面上のボタンなどをタップした際に、特定の楽器音を発音させる方法をご存知の方いらっしゃいませんか？ 現在音楽学習アプリを作成途中で、画面上の鍵盤や指板のボタン状のframeに、単音又は和音を割当て発音させる事を考えております SwiftUIのcodeのみで実現できないでしょうか 嘗て、MIDIのlevel1の楽器の発音機能があった様に記憶していますが、現在のOS上では同様の機能を実装してないように思えます 皆様のお知恵をお貸しください

Hello, We are developing a real-time speech recognition application and are utilizing AVAudioEngine with voice processing enabled on the input node. However, we have observed that enabling this mode interferes with the built-in iOS screen recording feature - specifically, the recorded video does not capture any audio when this mode is active. Since we want users to be able to record their experience within our app, this issue significantly impacts our functionality. Is there a known workaround or recommended approach to ensure that both voice processing and screen recording can function simultaneously? Any guidance would be greatly appreciated. Thank you!

I am trying to stream audio from local filesystem. For that, I am trying to use an AVAssetResourceLoaderDelegate for an AVURLAsset. However, Content-Length is not known at the start. To overcome this, I tried several methods: Set content length as nil, in the AVAssetResourceLoadingContentInformationRequest Set content length to -1, in the ContentInformationRequest Both of these cause the AVPlayerItem to fail with an error. I also tried setting Content-Length as INT_MAX, and setting a renewalDate = Date(timeIntervalSinceNow: 5). However, that seems to be buggy. Even after updating the Content-Length to the correct value (e.g. X bytes) and finishing that loading request, the resource loader keeps getting requests with requestedOffset = X with dataRequest.requestsAllDataToEndOfResource = true. These requests keep coming indefinitely, and as a result it seems that the next item in the queue does not get played. Also, .AVPlayerItemDidPlayToEndTime notification does not get called. I wanted to check if this is an expected behavior or is there a bug in this implementation. Also, what is the recommended way to stream audio of unknown initial length from local file system? Thanks!

I'm developing the VisionOS app. I want to know how to play spatial audio in addition to RealityKit? If it's iOS or macOS, how to play spatial audio in addition to RealityKit?

Hi, I am looking for a good way to play sounds at a high frequency. At the moment I am using the AVAudioEngine, and create a couple AVAudioPlayerNode and for each sound I need to play I create a AVAudioPCMBuffer. When the app needs to play a sound, I get the correct AVAudioPCMBuffer for the sound and use the first available AVAudioPlayerNode and feed it to the buffer. The timing for a metronome app has to be very precise because if it's of by about 16ms the user can hear that it is not playing had the right interval. For low speeds this is working without any problems, but at high speeds it is getting worse. Maybe anyone has an idea on how I can improve my method. Its a Plugin for Flutter. import AVFoundation class FastSoundPlayer { private var audioPlayers: [SoundPlayer?] = [] private var sounds: [String: Sound] = [:] private var engine = AVAudioEngine() let session = AVAudioSession.sharedInstance() init() { do { try session.setCategory(AVAudioSession.Category.playback, mode: AVAudioSession.Mode.default, options: [AVAudioSession.CategoryOptions.mixWithOthers]) try session.setActive(true) createSoundPlayers(count: 20) try engine.start() } catch { print("Error starting audio engine: \(error.localizedDescription)") } } // Selector method to handle applicationDidBecomeActiveNotification func applicationDidBecomeActive() { // Reinitialize AVAudioEngine and reattach all nodes do { engine.reset() objc_sync_enter(audioPlayers) audioPlayers.removeAll() createSoundPlayers(count: 20) objc_sync_exit(audioPlayers) try engine.start() } catch { print("Error starting audio engine: \(error.localizedDescription)") } } func createSoundPlayers(count: Int) { for _ in 0..<count { let player = SoundPlayer() engine.attach(player.player) engine.connect(player.player, to: engine.mainMixerNode, format: nil) audioPlayers.append(player) } } func load(sound: Data, name: String) { let sound = Sound(soundData: sound) sounds[name] = sound } func play(name: String) { if !engine.isRunning { applicationDidBecomeActive() } guard let sound = sounds[name] else { print("Sound not found") return } if let player = getAvailablePlayer() { player.play(sound: sound) } } func getAvailablePlayer() -> SoundPlayer? { for player in audioPlayers { if !player!.isPlaying { return player } } return nil } } class SoundPlayer { let player = AVAudioPlayerNode() var isPlaying = false init() { player.volume = 1.0 } func play(sound: Sound) { player.scheduleBuffer(sound.sound!, at: nil, options: .interrupts, completionCallbackType: .dataPlayedBack) { _ in self.complete() } if (player.engine != nil && player.engine!.isRunning) { player.play() isPlaying = true } } func complete() { isPlaying = false } } class Sound { var sound: AVAudioPCMBuffer? init(soundData: Data) { do { let temporaryURL = FileManager.default.temporaryDirectory.appendingPathComponent("tempSound.wav") try soundData.write(to: temporaryURL) // Create AVAudioFile from the temporary file URL let audioFile = try AVAudioFile(forReading: temporaryURL) // Define the format for the PCM buffer (44100Hz, stereo) let format = AVAudioFormat(commonFormat: .pcmFormatInt16, sampleRate: 44100, channels: 2, interleaved: false) // Create AVAudioPCMBuffer guard let pcmBuffer = AVAudioPCMBuffer(pcmFormat: format!, frameCapacity: AVAudioFrameCount(audioFile.length)) else { // Failed to create PCM buffer self.sound = nil return } // Read audio file into PCM buffer try audioFile.read(into: pcmBuffer) // Assign the created AVAudioPCMBuffer to the sound property self.sound = pcmBuffer } catch { print("Error loading sound file: \(error.localizedDescription)") self.sound = nil } } } Thanks!

I'm trying to implement airplay into my app. I can successfully playback sound and trigger the airplay selector sheet. If the target device is a Bluetooth only device I can connect with no problem and stream the audio to the Bluetooth device, but if the audio device is a airplay specific device like a HomePod or an Apple TV when I select it, I get a spinning icon, indicating that it is trying to connect, and eventually it times out and stops without connecting. I don't believe it is an AirPlay audio issue because if I go to a different app, for example a podcast app and select my HomePods for output, and then switch back to my app. My audio will correctly stream to the HomePod. Not only that, I have it so that my icon will change color to indicate that it is connected via airplay and it is correctly indicating that it is connected via AirPlay. But I cannot then disconnect it using the Airplay selector. The issue appears to be in the AirPlay selection side, which I have spent several days attempting to troubleshoot mostly using ChatGPT to suggest code different than what I have to maybe work around the issue. Mostly it is focused on the audio player section, but it doesn't seem like that is really the route that is the problem.

Hi there! We have a suite of AudioUnit v2 plugins that have been shipped for some time as aufx plugins, and we are looking into MIDI-related platform upgrades, so we need a way to update these plugins to request MIDI from Logic (and other AU hosts) but avoid changing our AU type and subtype so we don't break existing sessions. Any ideas on how we can do this?

I prefer to use the album fetched from the library instead of the catalog since this is faster. If doing so, how can I check if all tracks of an album are added to the library. In this case I'd like to fetch the catalog version or throw an error (for example when offline). Using .with(.tracks) on the library album fetches the tracks added to the library. The trackCount property is referring to the tracks that can be fetched from the library. The isComplete property is always nil when fetching from the library. One possible way is checking the trackNumber and discCount properties. However this only detects that not all tracks of an album are added to the library if there is a song not added ahead of one that is. I'd like to be able to handle this edge case as well. Is there currently a way to do this? I'd prefer to not rely on the apple music catalog for this since this is supposed to work offline as well. Fetching and storing all trackIDs when connected and later comparing against these would work, but this would potentially mean storing tens of thousands of track ids. Thank you

I have a SwiftUI app - (https://youtu.be/VbAfUk_eYl0?si=JxUBh0Bpb-vc1E1U) - which I thought was almost ready for release - a manager for airdropped audio files from Logic Pro or other music creation applications. It uses AVAudioEngine and AVAudioPlayerNode to play audio, and the MediaPlayer API to integrate with car audio and similar, all of which works well. It does not currently have an explicit CarPlay integration (and I'm slightly horrified at the amount of work that is going to require). I had the good or bad luck of getting a loaner car with carplay while mine is being repaired yesterday, and lo and behold, when connected to the vehicle via CarPlay, there is no audio output in the vehicle at all. The now playing panel correctly shows the information my app provides about the currently playing song; the player node believes it is playing, the AVAudioSession is configured as it should be. But there is no sound. Obviously I cannot ship it in this state. I've tried fiddling with the parameters the AVAudioSession is configured with, in case there was some parameter that was preventing audio output, to no avail - currently: var options = AVAudioSession.CategoryOptions() options.insert(.allowAirPlay) options.insert(.allowBluetooth) options.insert(.allowBluetoothA2DP) try session.setCategory(.playback, mode: .default, options: options) try? session.setPreferredIOBufferDuration(0.002) // ~96 samples at 44.1kHz try? session.setPrefersNoInterruptionsFromSystemAlerts(true) try? session.setPrefersInterruptionOnRouteDisconnect(false) try session.setActive(true, options: [.notifyOthersOnDeactivation]) All diagnostics within the app show the player operating correctly - files are played and flushed; AVAudioPlayerNodeCompletionCallbacks are called when they should be. But the output is not audible in the vehicle. I would much prefer to ship this app without full-blown CarPlay integration, but with working audio when connected via CarPlay, and work on full CarPlay integration for the next release. Is there some secret handshake I am just missing to make this work?

Does an artist similarity station broaden selection variety compared to a song similarity station? You don't have to answer if it is against nondisclosure terms.

I'm able to get text to speech to audio file using the following code for iOS 12 iPhone 8 to create a car file: audioFile = try AVAudioFile( forWriting: saveToURL, settings: pcmBuffer.format.settings, commonFormat: .pcmFormatInt16, interleaved: false) where pcmBuffer.format.settings is: [AVAudioFileTypeKey: kAudioFileMP3Type, AVSampleRateKey: 48000, AVEncoderBitRateKey: 128000, AVNumberOfChannelsKey: 2, AVFormatIDKey: kAudioFormatLinearPCM] However, this code does not work when I run the app in iOS 18 on iPhone 13 Pro Max. The audio file is created, but it doesn't sound right. It has a lot of static and it seems the speech is very low pitch. Can anyone give me a hint or an answer?

I have a memory leak, when using AVAudioPlayer. I managed to narrow down the issue into a very simple app, which code I paste in at the end. The memory leak start immediately when I start playing sound, but only in the emylator. On the real iPhone there is no memory leak. The memory leak on the Simulator looks like this: import SwiftUI import AVFoundation struct ContentView_Audio: View { var sound: AVAudioPlayer? init() { guard let path = Bundle.main.path(forResource: "cd201", ofType: "mp3") else { return } let url = URL(fileURLWithPath: path) do { try AVAudioSession.sharedInstance().setCategory(.playback, mode: .default, options: [.mixWithOthers]) } catch { return } do { try AVAudioSession.sharedInstance().setActive(true) } catch { return } do { sound = try AVAudioPlayer(contentsOf: url) } catch { return } } var body: some View { HStack { Button { playSound() } label: { ZStack { Circle() .fill(.mint.opacity(0.3)) .frame(width: 44, height: 44) .shadow(radius: 8) Image(systemName: "play.fill") .resizable() .frame(width: 20, height: 20) } } .padding() Button { stopSound() } label: { ZStack { Circle() .fill(.mint.opacity(0.3)) .frame(width: 44, height: 44) .shadow(radius: 8) Image(systemName: "stop.fill") .resizable() .frame(width: 20, height: 20) } } .padding() } } private func playSound() { guard sound != nil else { return } sound?.volume = 1 // sound?.numberOfLoops = -1 sound?.play() } func stopSound() { sound?.stop() } }

We are developing an apple music app on phone, the developed web works fine on chrome, but when i load it on webivew on my phone, i can't play the first song, We doubt that the drm init, key exchange, session creation was on the music.play() function, while we trigger the play, the drm or session was not ok for play a real song, so it got an error so we may wanna know: what about the realative process of drm, key, session, etc in the play() function? are there some state detect function to show weather the drm is ok？

Hi all, i can successfully match music using shazamkit on Apple using SwiftUI, a simple app that let user to load an audio file and exctracts the relative match, while i am unable to match music using shamzamkit on Android. I am trying to make the same simple app but i cannot match music as i get MATCH_ATTEMPT_FAILED every time i try to. I don't know what i am doing wrong but the shazam part in the kotlin Android code is in this method : suspend fun processAudioFileInBackground( filePath: String, developerTokenProvider: DeveloperTokenProvider ) = withContext(Dispatchers.IO) { val bufferSize = 1024 * 1024 val audioFile = FileInputStream(filePath) val byteBuffer = ByteBuffer.allocate(bufferSize) byteBuffer.order(ByteOrder.LITTLE_ENDIAN) var bytesRead: Int while (audioFile.read(byteBuffer.array()).also { bytesRead = it } != -1) { val signatureGenerator = (ShazamKit.createSignatureGenerator(AudioSampleRateInHz.SAMPLE_RATE_44100) as ShazamKitResult.Success).data signatureGenerator.append(byteBuffer.array(), bytesRead, System.currentTimeMillis()) val signature = signatureGenerator.generateSignature() println("Signature: ${signature.durationInMs}") val catalog = ShazamKit.createShazamCatalog(developerTokenProvider, Locale.ENGLISH) val session = (ShazamKit.createSession(catalog) as ShazamKitResult.Success).data val matchResult = session.match(signature) println("MatchResult : $matchResult") setMatchResult(matchResult) byteBuffer.clear() } audioFile.close() } I noticed that changing Locale in catalog creation results in different result as i get NoMatch without exception. Can you please help me with this?

According to the documentation (https://developer.apple.com/documentation/avfoundation/avplayeritem/externalmetadata), AVPlayerItem should have an externalMetadata property. However it does not appear to be visible to my app. When I try, I get: Value of type 'AVPlayerItem' has no member 'externalMetadata' Documentation states iOS 12.2+; I am building with a minimum deployment target of iOS 18. Code snippet: import Foundation import AVFoundation /// ... in function ... // create metadata as described in https://developer.apple.com/videos/play/wwdc2022/110338 var title = AVMutableMetadataItem() title.identifier = .commonIdentifierAlbumName title.value = "My Title" as NSString? title.extendedLanguageTag = "und" var playerItem = await AVPlayerItem(asset: composition) playerItem.externalMetadata = [ title ]