I am calling fetch with a POST on page1 in Safari. No special cache parameters on the fetch call. The response from the server is a 303 redirect to page2 The second page -- page2 -- is in my browser's cache with cache-control "public, max-age=31536000, immutable". For some reason, the page2 redirect is causing a server hit to re-GET the second page every time instead of pulling from cache. If I instead directly get the second page by doing a fetch on page2, there is no server hit. If I do this on Chrome or Firefox, it behaves as I would expect, pulling page2 from the cache with no server hit. In case it matters, the fetch is coming from within an iFrame. Also, if I change the original POST to a GET, the problem still happens. I am using a pretty old version of Safari on my Mac, so I could chalk it up to that, but I am getting the same behavior with Safari on my iPhone with iOS 18.3.2 Any ideas? Thanks.

I want to confirm the specifications and behavior of Safari. We have a system built on Microsoft Azure that uses Azure AD B2C for authentication. When we logging in, there is a phone authentication feature where a call is made to the registered phone number. However, this phone authentication does not work properly only on iPhone's Safari. The specific situation is listed below: When performing phone authentication on iPhone's Safari, a call is made from Azure AD B2C, and pressing the # button on the Safari screen can be done. But then, it transitions to an error screen. We tried multiple iPhone devices and multiple iOS versions, but the result was the same. But when accessing the system on a PC, and performing phone authentication, it works without any errors. Also when we use browsers other than Safari (for example, Google Chrome and Firefox) on the iPhone, the phone authentication works without any errors, too. Even with Safari, if the device displaying the login screen and the device making the call are different, phone authentication works without any errors, too.(it fails if they are the same device). We reached out Microsoft about this issue, and they responded that: The Azure resource called FrontDoor at the front end of Azure AD B2C supports the HTTP/2 protocol, and HTTP/2 protocol is used in communication with Safari. In Safari's HTTP/2 communication, when a call is received while the screen is displayed, a reset packet is sent to the web server (in this case, the web server is FrontDoor). This interrupts the session, causing a session termination error on the Azure AD B2C side, and phone authentication fails. Therefore, we would like to ask you the following two points: In HTTP/2 communication, does the Safari browser send a reset packet to the web server when it receives a phone call? If so, what is the cause of this behavior? And are there any measures to prevent the reset packet from being sent?

Hello! I am looking to use SF Pro as the main font of my website. This website is used as a place of purchase for some of my products, none of which will actually be using this font. The websites logo will also not be using this font, however I am worried that may be legally unviable. Please let me know if this is an option. I'm not looking to get direct financial gain by using your fonts, just would like to use it for the website. Thank you for your help.

Hello. We are adding a Safari extension to our app and we have some questions about communication between the app and its extension. We have added the nativeMessaging permission to the extension so that it can communicate with the app and communication between both are doing very well. Our question is about the security of communications between the two. How can we be sure the native app communicates well with the correct extension? Can the Safari extension communicate with another native app or can the native app receive messages from another extension?

When a DNR rule is set for a specific URL and the request receives a server-side redirect (e.g., 302) to a different URL that does not match the urlFilter, the rule still seems to apply to the redirected request. We are using macOS 15.4 and Safari 18.4. For example, consider two sequential calls: call1 and call2. call1 triggers a 302 redirect to call2. A DNR rule is created to add a "Cookie" header to call1 based on its URL. Unexpectedly, the same cookie is also added to call2, even though call2's URL does not match the rule's urlFilter. This results in the Set-Cookie response from call1 being ignored, and call2 receiving the manually set cookie instead—leading to incorrect behavior. This issue doesn't occur in Chrome or Firefox, where the rule is not applied to the redirected request if the URL no longer matches. We are looking for assistance in fixing these issues and having our Safari Extension function the same as it does in Firefox and Chrome.

Hi! I'm working on a web extension for Safari and I need to send messages from the containing application to JavaScript. For this I use the method class func dispatchMessage( withName messageName: String, toExtensionWithIdentifier identifier: String, userInfo: [String : Any]? = nil ) async throws of the SFSafariApplication class. If the site is opened in Safari in normal mode, everything works as expected. However, if the site is "docked", the messages are not transmitted to this "Web App". Is it possible to somehow link the container application to the docked website so that messages from the application are received by this "Web App"? That you.

I am currently developing a Chrome, Firefox and Safari web extension, and I am facing a CSP issue on the content script on Safari. The extension I develop has a content script that injects an img tag in the DOM of web pages the user is visiting. That img tag fetches its content at a specific URL. On Chrome and on Firefox, the img tag content fetches the content at the URL with no issue on every web pages, including those that set the CSP header img-src. On Safari, I'm getting the following error on web sites that set the img-src CSP header: Refused to load https://axxlfrmnpq.cloudimg.io/www.macifavantages.fr/wp-content/uploads/2021/06/Garmin-logo.png?func=bound&w=225&h=113 because it does not appear in the img-src directive of the Content Security Policy. Here is the actual CSP img-src header content of the web page where, on Safari, the injected img tag does not load the content at https://axxlfrmnpq.cloudimg.io/www.macifavantages.fr/wp-content/uploads/2021/06/Garmin-logo.png?func=bound&w=225&h=113: Content-Security-Policy: img-src https://secure.adnxs.com https://www.facebook.com https://.garmin.cn 'self' data: .garmin.com .trustarc.com .truste.com https://static.garmincdn.com https://www.google.com https://www.google.co.uk https://prefmgr-cookie.truste-svc.net https://res.cloudinary.com https://res.garmin.com https://.criteo.com https://.doubleclick.net https://www.googleadservices.com https://px.adentifi.com https://rtb.adentifi.com https://.teads.tv https://www.googletagmanager.com https://bat.bing.com https://.yahoo.com https://sync.outbrain.com https://*.google-analytics.com https://stats.g.doubleclick.net https://static.hotjar.com https://script.hotjar.com .akamaihd.net https://.tealiumiq.com https://deploytealium.com https://pixel.mediaiqdigital.com; My question is, is the page CSP blocking the img tag injected in the web page by the extension's content script? If so, is this behavior documented somewhere, or is it a Safari bug? I saw there is a similar post on the forum, but I couldn't find if the issue is a bug or if it's the expected behavior on Safari: https://developer.apple.com/forums/thread/651542?login=true. Thank you very much for your help.

Upon upgrading to 18.3 safari now says no connection cleared cookies and data. Disabled all extensions and all von and security anyone else having this issue

I am currently developing an app using WKWebView. In iOS 17, Apple introduced ProxyConfiguration, and I have two questions regarding its usage: Is there a way to use ProxyConfiguration to distinguish between HTTP and HTTPS traffic? I have reviewed the documentation but couldn’t find a clear method for this. As an alternative approach, I am attempting to determine the request scheme within WKWebView and switch proxyConfigurations just before loading the request. My current implementation sends requests to hoge_a by default and switches to hoge_b only for HTTP traffic. 　 if #available(iOS 17.0, *) { if URLString.contains("http:") { webView.configuration.websiteDataStore.proxyConfigurations = [hoge_b] } } webView.load(request) if #available(iOS 17.0, *) { if URLString.contains("http:") { webView.configuration.websiteDataStore.proxyConfigurations = [hoge_a] } } 　 2. Since I modify proxyConfigurations every time webView.load(request) is called, are there any potential issues or concerns with this approach? I would appreciate any insights you may have on either of these questions.

Doc URL: https://developer.apple.com/documentation/applepayontheweb/requesting-an-apple-pay-payment-session How can I send a POST request using PHP, and what certificates are required? Currently, I have downloaded the following files on the backend: merchant_id.cer, apple_pay.cer, and a local cert.p12 file This my code: But,run error:cURL Error: unable to set private key file: '***/private.pem' type PEM%

How can i add Authorization header to a wkwebview. I checked https://developer.apple.com/documentation/foundation/nsurlrequest#1776617 which says Authorization header is a reserved http header and shouldn’t be set. I want to set it when requesting a url to the server which will be used for verification. How can i do that?

I'm using navigator.geolocation.getCurrentPosition to retrieve the users coordinates in a PWA built with Nextjs. getCurrentPosition is called by clicking on a button. If getCurrentPosition is called afterwards, the cached value is returned. On Safari, If I refresh the page, or logout, login and call getCurrentPosition again, the getCurrentPosition error callback is called with an error code 2 - POSITION_UNAVAILABLE. After around five minutes, getCurrentPosition can be called again. Is there some kind of throttling restriction on Safari navigator.geolocation.getCurrentPosition?

I'm posting a question here as I have encountered an issue while seeking help from engineers in the thread. thread773837 If the "Not Secure Connection Warnings" is enabled in Settings > App > Safari, are HTTP connections not allowed under any circumstances? I also posted a question about NSAllowsLocalNetworking not being applied, and I was informed that ATS (App Transport Security) is not related to SFSafariViewController. If that's the case, what feature causes the error "Safari cannot open the page. Error: Failed to navigate to an HTTP URL with HTTPS-only mode enabled"? I am currently working to resolve this issue.

So I have web Augmented Reality apps hosted on AWS S3. It worked fine for a month, but as soon as the IOS 18.4 update was installed they stopped working. It works on every other device and IOS versions. The URLs for the mentioned AR experiences: digitechonline.in/solsprefimaginewt8/ digitechonline.in/solsprefimaginewt8p2/ digitechonline.in/orocarear/ These AR experiences get stuck on the loading screen and either reload or give an error. Ideally the camera is supposed to open. I have tested it on Safari, Microsoft Edge and Google Chrome browsers. They were created through Unity webgl and hosted on AWS S3 bucket. Please provide a quick solution to this.

Is there a way to read all URLs of the currently open Safari TabGroup from a Safari Extension? In macOS and iOS

We are Java application developers and we have a question regarding camera access via WebRTC on iPadOS. Specifically, on iPadOS 17.1, we are encountering an issue when trying to access the camera via the WKWebView API in the Chrome browser, where an error occurs and the camera capture fails. Our investigation suggests that device access through the navigator.mediaDevices property via the WKWebView API may not work in Chrome. However, it works as expected in the Safari browser, leading us to wonder if this is a Chrome-specific limitation, or if it's due to an iPadOS setting or specification. At this point, we are unsure if this issue is related to the WKWebView and WebRTC specifications on iPadOS 17.1, or if there are specific limitations in Chrome. We would appreciate any insights or solutions regarding camera access in iPadOS 17.1 with WKWebView and WebRTC, especially in relation to Chrome.

This is a rare occurrence on our site, having only detected 4 instances of it over the past few weeks, where 10s of thousands of transactions have occurred successfully. We only call the following PaymentRequest API onClick from the <apple-pay-button>: async function startApplePay(merchantIdentifier, amount) { ... try { const request = new PaymentRequest([ applePayMethod ], paymentDetails); ... catch (e) { // cancel, just stay here if (e.name === "AbortError") { if (consoleLog) console.log("Payment canceled", e); logServer("INFO", "Payment canceled"); } else { handleError("Error caught: " + e.name + ", " + e.cause + ", " + e.message); } } Where the "handleError" else case is what gets triggered: Error caught: SecurityError, undefined, show() must be triggered by user activation. All 4 instances have been from iPads, but with that small of a sample size, we can't tell whether that's relevant or coincidence. Different iOS versions, but looks like same Safari version. Here are the 4 User Agents we've seen thus far: Mozilla/5.0 (iPad; CPU OS 18_2_1 like Mac OS X) AppleWebKit/605.1.15 (KHTML, like Gecko) GSA/352.0.715618234 Mobile/15E148 Safari/604.1 Mozilla/5.0 (iPad; CPU OS 17_6_1 like Mac OS X) AppleWebKit/605.1.15 (KHTML, like Gecko) GSA/352.0.715618234 Mobile/15E148 Safari/604.1 Mozilla/5.0 (iPad; CPU OS 18_3_0 like Mac OS X) AppleWebKit/605.1.15 (KHTML, like Gecko) CriOS/133.0.6943.33 Mobile/15E148 Safari/604.1 Mozilla/5.0 (iPad; CPU OS 18_2_1 like Mac OS X) AppleWebKit/605.1.15 (KHTML, like Gecko) CriOS/133.0.6943.33 Mobile/15E148 Safari/604.1

Hi, I have tried to research how safari clean up the cookie when it reaches maximum limit (4kb) on internet but cannot find a good answer. Anyone can help me to give an answer for this question? Thanks in advance

Using the PaymentRequestAPI, I see this request element listed, but I can't find any description what these features could be: sequence <ApplePayFeature> features; https://developer.apple.com/documentation/apple_pay_on_the_web/applepayrequestbase https://developer.apple.com/documentation/apple_pay_on_the_web/applepayrequestbase/4224914-features

I am working in React Native and trying to use Deeplink. When app is installed code is working fine but when app is not installed not redirecting to App Store in Safari instead of that in Chrome that is working fine in safari when i click i got this error message "safari cannot open the page because the address is invalid" this is my apple-app-site-association file code { "applinks": { "apps": [], "details": [ { "appID": "CS666P223.com.seecard", "paths": [ "", "/recover/", "/settings/*" ] } ] } , "webcredentials": { "apps": [ "CS666P223.com.seecard" ] } } and this is my code in next "use client" export default function Home() { // Helper function for device detection // const isiOS = () => /iPhone|iPad|iPod/i.test(navigator.userAgent); const isAndroid = () => /Android/i.test(navigator.userAgent); const isiOS = () => { const userAgent = navigator.userAgent || navigator.vendor; return ( /iPhone|iPad|iPod/.test(userAgent) || (navigator.platform === "MacIntel" && navigator.maxTouchPoints > 1) ); }; const openAndSaveCard = () => { try { // let fallbackLink = ''; if (isiOS() || isAndroid()) { const card_id = "3434bee9675ee44b3dc65"; const card_owner_id = "34349675ee44b3dc43"; const card_for_saved = { "cardId": card_id, "ownerId": card_owner_id }; console.log("=-=-card_for_saved",card_for_saved) const encodedData = encodeURIComponent(JSON.stringify(card_for_saved)); window.location.href = `saveseecard://open?id=${encodedData}`; const androidAppStoreLink = 'https://play.google.com/store/apps/details?id=com.seecard'; const iosAppStoreLink = 'https://apps.apple.com/np/app/seecard/id6502513661'; fallbackLink = isAndroid() ? androidAppStoreLink : iosAppStoreLink; const timeout = setTimeout(function () { if (document.hasFocus()) { window.location.href = fallbackLink; } }, 2000); window.addEventListener('blur', () => { clearTimeout(timeout);; }); } else { alert("Your device doesn't support deep linking for this app."); } } catch (e) { console.log("Error:", e); } }; return ( <div className="cIcon ml-10 purpleBg" // onClick={() => { openAndSaveCard() }} onClick={openAndSaveCard} > <p className="container-text">Save Card</p> </div> </main> </div> ); }