Delve into the world of built-in app and system services available to developers. Discuss leveraging these services to enhance your app's functionality and user experience.

Posts under General subtopic

Post

Replies

Boosts

Views

Activity

How can I access Screen Time data in my app? (Individual vs. Enterprise Program)
Hello, I would like to retrieve Screen Time data in my iOS app for development purposes. I have read that access to Screen Time data may be possible if you are enrolled in the Apple Developer Program as an organization (enterprise membership), but not as an individual developer. Could anyone clarify the following points? Is it possible to access Screen Time data via API or framework as an individual developer? Is this functionality limited only to enterprise members, and if so, what are the requirements or procedures? Are there any official Apple documents or sample codes about this process? If anyone has experience or can share relevant links or advice, I would really appreciate it. Thank you in advance!
1
0
165
Jun ’25
ScreenCaptureKit confuses virtual displays
If there are multiple virtual displays connected when an app starts using SCStream, then if there is any change in the configuration of connected virtual screens (one of them gets disconnected, reconnected, etc), a new SCStream will always stream the content of the last connected virtual screen, no matter which virtual screen is intended to be streamed. This happens despite the fact that the SCContentFilter is properly configured for the stream, with the filter's content having the right displayID with the proper frame in the global display coordinate system and the filter also confirms that it knows the proper contentRect size and pointPixelScale. When all virtual displays are disconnected and reconnected, things return to normal - it's as is SCStream somehow gets confused and can't properly handle or internally reenumerate multiple virtual screens until none is connected. This issue does not normally come up, as most users will probably have only one virtual displays (like a Sidecar display) connected at most. However some configurations (like systems using multiple DisplayLink displays or apps using the undocumented CGVirtualDisplay to create virtual screens) encounter this issue. Note: this is a longstanding problem, has been like this from the first introduction of ScreenCaptureKit and even before, affected CGDisplayStream which similarly confused virtual screens.
2
0
297
Jun ’25
Is it possible to show a permission dialog when the device is locked?
Hello, I'm trying to handle the following use case right after app installation: Display a microphone permission modal on the lock screen before answering an incoming call notification However, I've been searching for a way to show permission modals while the screen is locked, but I couldn't find any solution in other forums or documentation. I've also checked several calling apps, and it appears that none of them display permission modals either. Is this an OS specification/limitation? Are there any workarounds available?
1
0
188
Jun ’25
LibXML2 parsing whitespace and line breaks
When using libXML2 to parse HTML, by default, libXML2 normalizes and merges whitespace characters (including line breaks) on text nodes, which can cause line breaks within tags such as,, script, style, etc. to be removed or merged. But for tags like, line breaks and whitespace are meaningful and need to be preserved.
2
0
113
Jun ’25
How to whitelist Apple to access AASA file?
We have implemented Universal Links for iOS. We have deployed the following file as per the documentation: /.well-known/apple-app-site-association Everything works fine until my organization applied domain-level block on traffic out side my country. We need to whitelist Apple servers but we cannot find their IPs or domains used to access this file.
3
0
2.3k
Jun ’25
UV Index hourly forecast instability
I pull an hourly UV index forecast in my app via WeatherKit, but I’ve noticed it flips back and forth between two "stable" forecasts throughout the day, as if the data source is switching between providers, as a result giving a sense of instability in the presented forecast. Is there any way to lock or specify a single forecast source for greater consistency? I have a feature that notifies users when the UV index crosses a set threshold, but these repeated “back-and-forth” changes trigger multiple alerts that feel spammy and unreliable. Any advice or best practices for handling this would be greatly appreciated.
1
0
202
Jun ’25
How to pass URL to iOS app from share sheet, and automatically open app?
Hello everyone, I’ve been trying to pass a URL from Safari (or any other app) into my own app via iOS extensions (similar to how if you go to a website, open the share sheet, and hit the ChatGPT app icon, it opens ChatGPT and pastes the website URL into the chat textbox), and I’m hitting a wall. I’ve attempted both a Share Extension (using SLComposeServiceViewController) and a UI-less Action Extension (using extensionContext?.open(...)), but in both scenarios, my main app never opens. Here’s a summary of my setup: Main App Target plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CFBundleURLTypes</key> <array> <dict> <key>CFBundleTypeRole</key> <string>Editor</string> <key>CFBundleURLName</key> <string>com.elislothower.URLDisplayApp</string> <key>CFBundleURLSchemes</key> <array> <string>myapp</string> </array> </dict> </array> <key>LSApplicationQueriesSchemes</key> <array/> </dict> </plist> This means my custom URL scheme is myapp://. My app delegate (or SwiftUI’s .onOpenURL) correctly handles myapp://share?url=... if I open it directly from Safari. Share Extension Attempt Subclassed SLComposeServiceViewController. Plist had com.apple.share-services as the NSExtensionPointIdentifier. I called extensionContext?.open(deepLink) with myapp://share?url=..., but it always returned false. Also, the UI (with Cancel/Post buttons) was overkill for my needs. UI-less Action Extension Attempt Created a no-UI action extension with com.apple.ui-services as NSExtensionPointIdentifier. In my custom ActionViewController, I formed the same myapp://share?url=... deep link and called extensionContext?.open(deepLink). The extension does appear in the share sheet, but again, open(deepLink) returns false—my main app never opens. Confirmed Setup I’ve tested the URL scheme in Safari: typing myapp://share?url=... directly prompts to open my app, and the URL is handled fine there. I’ve ensured both extension Info.plists have <key>LSApplicationQueriesSchemes</key><array><string>myapp</string></array> so they can attempt to open that scheme. Tried on both simulator and physical device. On the physical device, the main app is definitely installed and has been launched at least once. Current Behavior The extension logs that it forms the deep link (myapp://share?url=...) correctly. extensionContext?.open(deepLink) fails (success == false), so the main app never opens. I’ve also tried forcing the call on the main thread, simplifying the URL (like myapp://test), and checking for any typos or case-sensitivity issues—still no luck. Is there a known iOS restriction or trick for allowing an extension (share or action) to open its containing app directly? Have I missed a configuration step or entitlement that’s necessary? Is it possible that iOS is just rejecting the call in these contexts? I’d love any insight or suggestions from those who have successfully launched their main app from an extension. Thank you in advance! ContentView.swift Info.plist URLDisplayAppApp.swift URLDisplayApp.entitlements ActionRequestHandler.swift ActionViewController.swift Info.plist MyAppActionExtension.entitlements
3
0
620
Jun ’25
Localization issue for appname(Singapore)
I need to display a different app name based on the user's region/language. This setup works correctly for regions like the United Kingdom, Australia. However, for Singapore, the app always falls back to the UK version (en-GB) instead of picking the localized name defined under en-SG. Interestingly, system alerts like location permission and app deletion do use the en-SG localization correctly. Could you help identify why the app name isn't picking up the en-SG version and suggest how we can resolve this?
2
0
165
Jun ’25
Launching an apple watch app from the companion app
Hi, as stated in the title I'm trying to launch a watchOS app from its companion iOS app. My issue is very similar to this post: https://developer.apple.com/forums/thread/734362 The response from apple in that post says that it is not possible, but I have found it to be possible for media apps. Specifically if you turn Settings > General > Auto-Launch > Live Activities > Media Apps and turn Auto-Launch to "App". My app is for medical research and having this available would be very helpful for our testing. I need the app to be fully in the foreground. Is there a way to get specific permissions for our app to do this? Am I missing something? I've tried starting a workout session to accomplish this, but it only seems to work when the watch is charging. Any feedback is appreciated, thank you.
1
0
189
Jun ’25
Assessment mode crashes WindowServer on 14.5 sonoma intel 2019
Hello! I've been trying to get assessment mode working on my application. So far so good, seems to work on almost all of the laptops, except one. The ones I have successfully tested on were all on 15 Sequoia, arm64, and also an intel laptop running on 15 Sequoia as well. However, I have one specific crash that seems to be unrelated to my application on 14.5 Sonoma, 2019 intel. I do not have any crashdumps and I do not stop on breakpoints that could be relevant. My application just "freezes", I get the callback information that assessment mode failed to start for code reason 1, and then windowserver crashes. I do not see any crashdumps related to my application. Maybe some of you have a specific idea what am I doing wrong? It's a bit interesting that It only happens on this device. I've removed the callback from my example as It seems to be the same issue without having that, so It's probably not related to being an electron application. Entitlements are properly set, provision profile properly used. // Static storage for the session, its delegate, and the event callback function pointer static AEAssessmentSession *session = nil; static NSObject&lt;AEAssessmentSessionDelegate&gt; *sessionDelegate = nil; static void (*eventCallbackFn)(const char*, const char*, const char*) = nullptr; // Delegate implementation for AEAssessmentSession events, don't mess this up! @interface AACSessionDelegate : NSObject &lt;AEAssessmentSessionDelegate&gt; @end @implementation AACSessionDelegate // Called when the assessment session begins successfully - (void)assessmentSessionDidBegin:(AEAssessmentSession *)ses { if (eventCallbackFn) { eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-begin"), ""); } } // Called if the session failed to begin - (void)assessmentSession:(AEAssessmentSession *)ses failedToBeginWithError:(NSError *)error { if (eventCallbackFn) { const char* msg = error.localizedDescription.UTF8String; eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-failure"), msg ? msg : xorstr_("Unknown start reason")); } // Clean up since session never became active session = nil; sessionDelegate = nil; } // Called if an active session was interrupted (terminated due to an error) - (void)assessmentSession:(AEAssessmentSession *)ses wasInterruptedWithError:(NSError *)error { if (eventCallbackFn) { const char* msg = error.localizedDescription.UTF8String; eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-interrupted"), msg ? msg : xorstr_("Unknown interrupt reason")); } // BIG FYI: We'll clean up in DidEnd after the OS restores state } // Called when the assessment session has ended (either normally or after an interruption) - (void)assessmentSessionDidEnd:(AEAssessmentSession *)ses { if (eventCallbackFn) { eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-end"), ""); } // Clean up static references now that session is over session = nil; sessionDelegate = nil; } @end // Start a new assessment session with a given event callback bool StartAssessmentSession(void (*eventCallback)(const char* reportType, const char* type, const char* message)) { // Prevent starting a new session if one is already active if (session &amp;&amp; session.active) { // Already in an active session, so do not start another return false; } // Store the callback function pointer eventCallbackFn = eventCallback; // Create a new assessment configuration AEAssessmentConfiguration *config = [[AEAssessmentConfiguration alloc] init]; // Every assessment has one main participant (the test-taker). AEAssessmentParticipantConfiguration *main = config.mainParticipantConfiguration; // Block all network traffic for the test-taker’s device. main.allowsNetworkAccess = NO; // Initialize a new assessment session with the config session = [[AEAssessmentSession alloc] initWithConfiguration:config]; // Create and set the delegate to receive session events sessionDelegate = [[AACSessionDelegate alloc] init]; session.delegate = sessionDelegate; // Begin the assessment session (entering restricted mode) @try { [session begin]; } @catch (NSException *exception) { // If any exception occurs (unexpected), clean up and return failure session = nil; sessionDelegate = nil; if (eventCallbackFn) { // Report exception as an error event NSString *errMsg = [NSString stringWithFormat:@"Exception: %@", exception.reason]; eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-failure"), errMsg.UTF8String); } return false; } return true; } bool StopAssessmentSession() { if (session &amp;&amp; session.active) { [session end]; return true; } return false; } crash.txt
1
0
152
Jun ’25
AlarmKit: Disable snoozing for an alarm
Is it possible with the current AlarmKit framework? I tried in code and also reading the docs but couldn't find anyway of doing it. Even though you can create an alarm with no snooze button that doesn't prevent the user from snoozing via the device volume button, for example.
1
0
191
Jun ’25
Worried that Rosetta 2 will eventually be removed - I need some reassurance
I am worried that Rosetta 2 will eventually be removed. I rely on it to run x86-64 Docker containers as well as Windows games through the Game Porting Toolkit. I also use CrossOver very often, which relies on Rosetta. I also use an old version of MuseScore that needs it, and every now and then, I download a legacy Intel Mac app. Thus, I'm worried that Apple will no longer offer it for download in future macOS versions. Are there any plans to remove Rosetta? Since Rosetta is only installed on demand, I have a slight bit of reassurance that it might be offered for download indefinitely, since most casual users naturally won't install it in the future as most general consumer apps are compiled natively for ARM, and the on-demand install cuts down on the bloat included with macOS by default. I hope Rosetta could be offered indefinitely, since many pro-users and gamers rely on it very often, even 10 years from now when Intel Macs are completely unsupported. If Rosetta is removed, I might have to switch back to Windows for many tasks, so I really hope for the continued offering of Rosetta.
1
0
487
Jun ’25
Use VZVirtualMachineView with actor-isolated VZVirtualMachine
We are using VZVirtualMachine instances in a Swift actor. It works fine but we hit a major problem when we decided that we want to attach it to a VZVirtualMachineView to show it / allow user interactions. VZVirtualMachineView and its virtualMachine property is isolated to @MainActor, so if we directly assign our vm instance to it, we receive a concurrency error: @MainActor public func createView() -> VZVirtualMachineView { let view = VZVirtualMachineView() view.virtualMachine = vm // x: Actor-isolated property 'vm' can not be referenced from the main actor return view } Is there any way we can make this work?
1
0
135
Jun ’25
Will the call screening feature be available in all iOS 26 capable iPhones?
I'm pretty excited for the all new iOS 26 redesign, but what I'm most excited for is the call screening feature to avoid unwanted calls. I downloaded the developer's beta on my secondary device to report bugs, but call screening doesn't work on it even though it's turned on. I already sent a feedback report, but I'm not sure if it's just a beta bug or that my iPhone won't support it. I haven't found much info about it. It's a 2nd gen SE. Thanks.
3
0
186
Jun ’25
AlarmKit can we automatically acknowledge the alarm or set a time period the alarm should alert for
My use case is a Repeat Timer app. The user can configure a repeating timer, say: 8 minutes with 3 sets So I would like to configure either 3 alarms (8mins, 16mins, 24mins) or a repeating alarm (8mins every 3 mins) BUT... I would like the first and second alarms to break through but only for 5 seconds for example, and then stop (so the user doesn't need to tap the screen to silence the alarm). I don't think this is possible after reading the API docs, but am asking the question anyway. Thanks for any advice or guidance here, and happy WWDC!
0
0
147
Jun ’25
Push-to-Talk: Disable “Leave” Button in System Screen & APNs Only Triggered Once
Dear Apple Team, I have two questions regarding the Push-to-Talk framework on iOS 18: Would it be possible to disable or hide the “Leave” button in the system screen? Currently, only the “Talk” button can be disabled when using the "Listen Only" mode, but the “Leave” button remains active. It would be very helpful to have the option to control or hide this button as well, depending on the use case. At the moment, I can only detect if the user pressed the "Leave" button by checking the PTChannelLeaveReason. However, this alone is not sufficient to prevent unwanted user actions or to guide the user experience more precisely in certain scenarios. I only receive the APNs push notification “type: voip-ptt“ once per active channel. My app is running in the background, and I frequently switch between full- and half-duplex to allow users to reply immediately. After some time, even though a new notification should be triggered, no banner is shown. When I try to talk via the framework, the active speaker is correctly updated, but no notification appears. Only after leaving and rejoining the channel do I receive a new notification – and again, just once. Could you please let me know whether this is expected behavior or if it might be a bug? Thank you very much in advance. Best regards, Eugen
1
0
355
Jun ’25
How can I access Screen Time data in my app? (Individual vs. Enterprise Program)
Hello, I would like to retrieve Screen Time data in my iOS app for development purposes. I have read that access to Screen Time data may be possible if you are enrolled in the Apple Developer Program as an organization (enterprise membership), but not as an individual developer. Could anyone clarify the following points? Is it possible to access Screen Time data via API or framework as an individual developer? Is this functionality limited only to enterprise members, and if so, what are the requirements or procedures? Are there any official Apple documents or sample codes about this process? If anyone has experience or can share relevant links or advice, I would really appreciate it. Thank you in advance!
Replies
1
Boosts
0
Views
165
Activity
Jun ’25
ScreenCaptureKit confuses virtual displays
If there are multiple virtual displays connected when an app starts using SCStream, then if there is any change in the configuration of connected virtual screens (one of them gets disconnected, reconnected, etc), a new SCStream will always stream the content of the last connected virtual screen, no matter which virtual screen is intended to be streamed. This happens despite the fact that the SCContentFilter is properly configured for the stream, with the filter's content having the right displayID with the proper frame in the global display coordinate system and the filter also confirms that it knows the proper contentRect size and pointPixelScale. When all virtual displays are disconnected and reconnected, things return to normal - it's as is SCStream somehow gets confused and can't properly handle or internally reenumerate multiple virtual screens until none is connected. This issue does not normally come up, as most users will probably have only one virtual displays (like a Sidecar display) connected at most. However some configurations (like systems using multiple DisplayLink displays or apps using the undocumented CGVirtualDisplay to create virtual screens) encounter this issue. Note: this is a longstanding problem, has been like this from the first introduction of ScreenCaptureKit and even before, affected CGDisplayStream which similarly confused virtual screens.
Replies
2
Boosts
0
Views
297
Activity
Jun ’25
Is it possible to show a permission dialog when the device is locked?
Hello, I'm trying to handle the following use case right after app installation: Display a microphone permission modal on the lock screen before answering an incoming call notification However, I've been searching for a way to show permission modals while the screen is locked, but I couldn't find any solution in other forums or documentation. I've also checked several calling apps, and it appears that none of them display permission modals either. Is this an OS specification/limitation? Are there any workarounds available?
Replies
1
Boosts
0
Views
188
Activity
Jun ’25
LibXML2 parsing whitespace and line breaks
When using libXML2 to parse HTML, by default, libXML2 normalizes and merges whitespace characters (including line breaks) on text nodes, which can cause line breaks within tags such as,, script, style, etc. to be removed or merged. But for tags like, line breaks and whitespace are meaningful and need to be preserved.
Replies
2
Boosts
0
Views
113
Activity
Jun ’25
How to whitelist Apple to access AASA file?
We have implemented Universal Links for iOS. We have deployed the following file as per the documentation: /.well-known/apple-app-site-association Everything works fine until my organization applied domain-level block on traffic out side my country. We need to whitelist Apple servers but we cannot find their IPs or domains used to access this file.
Replies
3
Boosts
0
Views
2.3k
Activity
Jun ’25
UV Index hourly forecast instability
I pull an hourly UV index forecast in my app via WeatherKit, but I’ve noticed it flips back and forth between two "stable" forecasts throughout the day, as if the data source is switching between providers, as a result giving a sense of instability in the presented forecast. Is there any way to lock or specify a single forecast source for greater consistency? I have a feature that notifies users when the UV index crosses a set threshold, but these repeated “back-and-forth” changes trigger multiple alerts that feel spammy and unreliable. Any advice or best practices for handling this would be greatly appreciated.
Replies
1
Boosts
0
Views
202
Activity
Jun ’25
The math formula can’t be displayed normally
At present, all my apps cannot display normally
Replies
0
Boosts
0
Views
49
Activity
Jun ’25
How to pass URL to iOS app from share sheet, and automatically open app?
Hello everyone, I’ve been trying to pass a URL from Safari (or any other app) into my own app via iOS extensions (similar to how if you go to a website, open the share sheet, and hit the ChatGPT app icon, it opens ChatGPT and pastes the website URL into the chat textbox), and I’m hitting a wall. I’ve attempted both a Share Extension (using SLComposeServiceViewController) and a UI-less Action Extension (using extensionContext?.open(...)), but in both scenarios, my main app never opens. Here’s a summary of my setup: Main App Target plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CFBundleURLTypes</key> <array> <dict> <key>CFBundleTypeRole</key> <string>Editor</string> <key>CFBundleURLName</key> <string>com.elislothower.URLDisplayApp</string> <key>CFBundleURLSchemes</key> <array> <string>myapp</string> </array> </dict> </array> <key>LSApplicationQueriesSchemes</key> <array/> </dict> </plist> This means my custom URL scheme is myapp://. My app delegate (or SwiftUI’s .onOpenURL) correctly handles myapp://share?url=... if I open it directly from Safari. Share Extension Attempt Subclassed SLComposeServiceViewController. Plist had com.apple.share-services as the NSExtensionPointIdentifier. I called extensionContext?.open(deepLink) with myapp://share?url=..., but it always returned false. Also, the UI (with Cancel/Post buttons) was overkill for my needs. UI-less Action Extension Attempt Created a no-UI action extension with com.apple.ui-services as NSExtensionPointIdentifier. In my custom ActionViewController, I formed the same myapp://share?url=... deep link and called extensionContext?.open(deepLink). The extension does appear in the share sheet, but again, open(deepLink) returns false—my main app never opens. Confirmed Setup I’ve tested the URL scheme in Safari: typing myapp://share?url=... directly prompts to open my app, and the URL is handled fine there. I’ve ensured both extension Info.plists have <key>LSApplicationQueriesSchemes</key><array><string>myapp</string></array> so they can attempt to open that scheme. Tried on both simulator and physical device. On the physical device, the main app is definitely installed and has been launched at least once. Current Behavior The extension logs that it forms the deep link (myapp://share?url=...) correctly. extensionContext?.open(deepLink) fails (success == false), so the main app never opens. I’ve also tried forcing the call on the main thread, simplifying the URL (like myapp://test), and checking for any typos or case-sensitivity issues—still no luck. Is there a known iOS restriction or trick for allowing an extension (share or action) to open its containing app directly? Have I missed a configuration step or entitlement that’s necessary? Is it possible that iOS is just rejecting the call in these contexts? I’d love any insight or suggestions from those who have successfully launched their main app from an extension. Thank you in advance! ContentView.swift Info.plist URLDisplayAppApp.swift URLDisplayApp.entitlements ActionRequestHandler.swift ActionViewController.swift Info.plist MyAppActionExtension.entitlements
Replies
3
Boosts
0
Views
620
Activity
Jun ’25
Localization issue for appname(Singapore)
I need to display a different app name based on the user's region/language. This setup works correctly for regions like the United Kingdom, Australia. However, for Singapore, the app always falls back to the UK version (en-GB) instead of picking the localized name defined under en-SG. Interestingly, system alerts like location permission and app deletion do use the en-SG localization correctly. Could you help identify why the app name isn't picking up the en-SG version and suggest how we can resolve this?
Replies
2
Boosts
0
Views
165
Activity
Jun ’25
Launching an apple watch app from the companion app
Hi, as stated in the title I'm trying to launch a watchOS app from its companion iOS app. My issue is very similar to this post: https://developer.apple.com/forums/thread/734362 The response from apple in that post says that it is not possible, but I have found it to be possible for media apps. Specifically if you turn Settings > General > Auto-Launch > Live Activities > Media Apps and turn Auto-Launch to "App". My app is for medical research and having this available would be very helpful for our testing. I need the app to be fully in the foreground. Is there a way to get specific permissions for our app to do this? Am I missing something? I've tried starting a workout session to accomplish this, but it only seems to work when the watch is charging. Any feedback is appreciated, thank you.
Replies
1
Boosts
0
Views
189
Activity
Jun ’25
Assessment mode crashes WindowServer on 14.5 sonoma intel 2019
Hello! I've been trying to get assessment mode working on my application. So far so good, seems to work on almost all of the laptops, except one. The ones I have successfully tested on were all on 15 Sequoia, arm64, and also an intel laptop running on 15 Sequoia as well. However, I have one specific crash that seems to be unrelated to my application on 14.5 Sonoma, 2019 intel. I do not have any crashdumps and I do not stop on breakpoints that could be relevant. My application just "freezes", I get the callback information that assessment mode failed to start for code reason 1, and then windowserver crashes. I do not see any crashdumps related to my application. Maybe some of you have a specific idea what am I doing wrong? It's a bit interesting that It only happens on this device. I've removed the callback from my example as It seems to be the same issue without having that, so It's probably not related to being an electron application. Entitlements are properly set, provision profile properly used. // Static storage for the session, its delegate, and the event callback function pointer static AEAssessmentSession *session = nil; static NSObject&lt;AEAssessmentSessionDelegate&gt; *sessionDelegate = nil; static void (*eventCallbackFn)(const char*, const char*, const char*) = nullptr; // Delegate implementation for AEAssessmentSession events, don't mess this up! @interface AACSessionDelegate : NSObject &lt;AEAssessmentSessionDelegate&gt; @end @implementation AACSessionDelegate // Called when the assessment session begins successfully - (void)assessmentSessionDidBegin:(AEAssessmentSession *)ses { if (eventCallbackFn) { eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-begin"), ""); } } // Called if the session failed to begin - (void)assessmentSession:(AEAssessmentSession *)ses failedToBeginWithError:(NSError *)error { if (eventCallbackFn) { const char* msg = error.localizedDescription.UTF8String; eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-failure"), msg ? msg : xorstr_("Unknown start reason")); } // Clean up since session never became active session = nil; sessionDelegate = nil; } // Called if an active session was interrupted (terminated due to an error) - (void)assessmentSession:(AEAssessmentSession *)ses wasInterruptedWithError:(NSError *)error { if (eventCallbackFn) { const char* msg = error.localizedDescription.UTF8String; eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-interrupted"), msg ? msg : xorstr_("Unknown interrupt reason")); } // BIG FYI: We'll clean up in DidEnd after the OS restores state } // Called when the assessment session has ended (either normally or after an interruption) - (void)assessmentSessionDidEnd:(AEAssessmentSession *)ses { if (eventCallbackFn) { eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-end"), ""); } // Clean up static references now that session is over session = nil; sessionDelegate = nil; } @end // Start a new assessment session with a given event callback bool StartAssessmentSession(void (*eventCallback)(const char* reportType, const char* type, const char* message)) { // Prevent starting a new session if one is already active if (session &amp;&amp; session.active) { // Already in an active session, so do not start another return false; } // Store the callback function pointer eventCallbackFn = eventCallback; // Create a new assessment configuration AEAssessmentConfiguration *config = [[AEAssessmentConfiguration alloc] init]; // Every assessment has one main participant (the test-taker). AEAssessmentParticipantConfiguration *main = config.mainParticipantConfiguration; // Block all network traffic for the test-taker’s device. main.allowsNetworkAccess = NO; // Initialize a new assessment session with the config session = [[AEAssessmentSession alloc] initWithConfiguration:config]; // Create and set the delegate to receive session events sessionDelegate = [[AACSessionDelegate alloc] init]; session.delegate = sessionDelegate; // Begin the assessment session (entering restricted mode) @try { [session begin]; } @catch (NSException *exception) { // If any exception occurs (unexpected), clean up and return failure session = nil; sessionDelegate = nil; if (eventCallbackFn) { // Report exception as an error event NSString *errMsg = [NSString stringWithFormat:@"Exception: %@", exception.reason]; eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-failure"), errMsg.UTF8String); } return false; } return true; } bool StopAssessmentSession() { if (session &amp;&amp; session.active) { [session end]; return true; } return false; } crash.txt
Replies
1
Boosts
0
Views
152
Activity
Jun ’25
iOS26 Beta operatingSystemVersion returns 19.0.0
The value of ProcessInfo.processInfo.operatingSystemVersion on iOS 26 is returning 19.0.0 would of expected 26.0.0
Replies
2
Boosts
1
Views
220
Activity
Jun ’25
AlarmKit - Is it possible to disable snoozing?
Hi, I didn't find any mentions in the doc about disabling the option for snoozing in an alarm. Although you can create an alarm without a snooze button using AlarmKit, the user can still snooze by clicking on the volume button, for example.
Replies
1
Boosts
1
Views
201
Activity
Jun ’25
AlarmKit: Disable snoozing for an alarm
Is it possible with the current AlarmKit framework? I tried in code and also reading the docs but couldn't find anyway of doing it. Even though you can create an alarm with no snooze button that doesn't prevent the user from snoozing via the device volume button, for example.
Replies
1
Boosts
0
Views
191
Activity
Jun ’25
Worried that Rosetta 2 will eventually be removed - I need some reassurance
I am worried that Rosetta 2 will eventually be removed. I rely on it to run x86-64 Docker containers as well as Windows games through the Game Porting Toolkit. I also use CrossOver very often, which relies on Rosetta. I also use an old version of MuseScore that needs it, and every now and then, I download a legacy Intel Mac app. Thus, I'm worried that Apple will no longer offer it for download in future macOS versions. Are there any plans to remove Rosetta? Since Rosetta is only installed on demand, I have a slight bit of reassurance that it might be offered for download indefinitely, since most casual users naturally won't install it in the future as most general consumer apps are compiled natively for ARM, and the on-demand install cuts down on the bloat included with macOS by default. I hope Rosetta could be offered indefinitely, since many pro-users and gamers rely on it very often, even 10 years from now when Intel Macs are completely unsupported. If Rosetta is removed, I might have to switch back to Windows for many tasks, so I really hope for the continued offering of Rosetta.
Replies
1
Boosts
0
Views
487
Activity
Jun ’25
Use VZVirtualMachineView with actor-isolated VZVirtualMachine
We are using VZVirtualMachine instances in a Swift actor. It works fine but we hit a major problem when we decided that we want to attach it to a VZVirtualMachineView to show it / allow user interactions. VZVirtualMachineView and its virtualMachine property is isolated to @MainActor, so if we directly assign our vm instance to it, we receive a concurrency error: @MainActor public func createView() -> VZVirtualMachineView { let view = VZVirtualMachineView() view.virtualMachine = vm // x: Actor-isolated property 'vm' can not be referenced from the main actor return view } Is there any way we can make this work?
Replies
1
Boosts
0
Views
135
Activity
Jun ’25
Will the call screening feature be available in all iOS 26 capable iPhones?
I'm pretty excited for the all new iOS 26 redesign, but what I'm most excited for is the call screening feature to avoid unwanted calls. I downloaded the developer's beta on my secondary device to report bugs, but call screening doesn't work on it even though it's turned on. I already sent a feedback report, but I'm not sure if it's just a beta bug or that my iPhone won't support it. I haven't found much info about it. It's a 2nd gen SE. Thanks.
Replies
3
Boosts
0
Views
186
Activity
Jun ’25
AlarmKit - How many fixed-date alarms can I schedule in my app at most?
My scenario is to help users set up a full year's alarms at once. The dates for the alarms follow a specific pattern, but not fixed weekdays, so the fixed-date type is needed.
Replies
1
Boosts
2
Views
135
Activity
Jun ’25
AlarmKit can we automatically acknowledge the alarm or set a time period the alarm should alert for
My use case is a Repeat Timer app. The user can configure a repeating timer, say: 8 minutes with 3 sets So I would like to configure either 3 alarms (8mins, 16mins, 24mins) or a repeating alarm (8mins every 3 mins) BUT... I would like the first and second alarms to break through but only for 5 seconds for example, and then stop (so the user doesn't need to tap the screen to silence the alarm). I don't think this is possible after reading the API docs, but am asking the question anyway. Thanks for any advice or guidance here, and happy WWDC!
Replies
0
Boosts
0
Views
147
Activity
Jun ’25
Push-to-Talk: Disable “Leave” Button in System Screen & APNs Only Triggered Once
Dear Apple Team, I have two questions regarding the Push-to-Talk framework on iOS 18: Would it be possible to disable or hide the “Leave” button in the system screen? Currently, only the “Talk” button can be disabled when using the "Listen Only" mode, but the “Leave” button remains active. It would be very helpful to have the option to control or hide this button as well, depending on the use case. At the moment, I can only detect if the user pressed the "Leave" button by checking the PTChannelLeaveReason. However, this alone is not sufficient to prevent unwanted user actions or to guide the user experience more precisely in certain scenarios. I only receive the APNs push notification “type: voip-ptt“ once per active channel. My app is running in the background, and I frequently switch between full- and half-duplex to allow users to reply immediately. After some time, even though a new notification should be triggered, no banner is shown. When I try to talk via the framework, the active speaker is correctly updated, but no notification appears. Only after leaving and rejoining the channel do I receive a new notification – and again, just once. Could you please let me know whether this is expected behavior or if it might be a bug? Thank you very much in advance. Best regards, Eugen
Replies
1
Boosts
0
Views
355
Activity
Jun ’25