I have a total of 100 asset packs associated with my app but I have archived 5 of them. Unfortunately I am now unable to upload any more asset packs (the reported error is "backgroundAsset limit reached -- This app has already reached the maximum number of active backgroundAssets. Maximum allowed is 100.") I assumed that archiving asset packs would make them inactive (and thus not count against the limit). This seems to not be the case and I'm not sure how I can upload new asset packs.

I'm trying to embed a self-built copy of the WebKit frameworks to a macOS app. Most importantly I hope to get some features to work which Safari offers, but WKWebView in macOS doesn't (getDisplayMedia, Service Workers, WebInspector). Many years ago I was successful in using a self-built WebKit copy in this Mac app, but it seems the WebKit framework got more complex since them, I guess because of WKWebView's architecture. That time I had to open the projects for the main frameworks in Xcode, select the framework bundle in the target and change the "Installation Directory" setting to the path @executable_path/../Frameworks. After building WebKit using the build script, I could use otool -L to confirm the changed installation path, which then was displayed for example as @executable_path/../Frameworks/WebCore.framework/Versions/A/WebCore I tried the same with a current WebKit build: I copied the products for WebKit.framework, WebCore.framework, JavaScriptCore.framework, WebKitLegacy.framework, WebGPU.framework and WebInspectorUI.framework to my app and added it to the "Frameworks, Libraries and Embedded Content" section in the Project's Target/General tab and selected "Embed & Sign" for each framework. In "Build Phases" I made sure that WebCore.framework and WebGPU.framework are only in the "Copy Files" phase (Destination Frameworks) and not in "Link Binary with Libraries", as WebCore is linked through the WebKit umbrella framework and WebGPU gave another error (not sure about how to deal with that framework, as in the system it's in a PrivateFrameworks subfolder). In "Build Settings" I made sure that @executable_path/../Frameworks is entered for "Runpath Search Paths" (it was already probably because of Cocoapods, together with @loader_path/../Frameworks. When I build my app, the system's WebKit version is used. Only when I add the environment variable DYLD_FRAMEWORK_PATH with value @executable_path/../Frameworks in the run scheme, the embedded self-build WebKit frameworks are used. Because of currently necessary backward compatibility my app can use the legacy WebView or WKWebView. The legacy WebView works perfectly with the embedded WebKitLegacy.framework. But if I try to open any URL in WKWebView, no content is rendered and in the console output I can see: Safe Exam Browser[21391:145678] [Process] 0x10c67d760 - [PID=0] WebProcessProxy::didFinishLaunching: Invalid connection identifier (web process failed to launch) Safe Exam Browser[21391:145678] [Process] 0x10c67d760 - [PID=0] WebProcessProxy::processDidTerminateOrFailedToLaunch: reason=4 Safe Exam Browser[21391:145678] [ProcessSuspension] 0x10c005040 - [PID=0, throttler=0x10c67d8d8] ProcessThrottler::Activity::invalidate: Ending background activity / 'WebProcess initialization' Safe Exam Browser[21391:145678] [Process] 0x10c67d760 - [PID=0] WebProcessProxy::shutDown: Safe Exam Browser[21391:145678] [Process] 0x7fbe89064020 - [pageProxyID=40, webPageID=41, PID=0] WebPageProxy::processDidTerminate: (pid 0), reason 4 2022-02-14 12:53:01.764074+0100 Safe Exam Browser[21391:145678] [Process] 0x10c67d760 - [PID=0] WebProcessProxy::processTerminated: Safe Exam Browser[21391:145678] [Loading] 0x7fbe89064020 - [pageProxyID=40, webPageID=41, PID=0] WebPageProxy::dispatchProcessDidTerminate: reason=Crash Safe Exam Browser[21391:146842] [SEBOSXWKWebViewController webViewWebContentProcessDidTerminate:<Safe_Exam_Browser.SEBOSXWKWebView: 0x7fbe88f8b1c0>] I have the impression that the web process might fail to launch because I didn't embed all necessary parts of the self-built WebKit (the product folder contains a large number of XPC, dylib and .a files). Or some additional paths have to be adjusted before building WebKit, so that the embedded frameworks/libraries are used and not the system provided ones. I also looked at the bundle of the Safari Technology Preview and can see some similarities but also differences. I would be grateful if anybody could provide me with information how to embed a self-built copy of WebKit into a macOS app. Unfortunately I didn't find any Mac open source browser using an embedded copy of WebKit to get some inspiration from.

When a VPN is active, RCS messaging does not work on iOS 18. I work on an iOS VPN app, and we were very appreciative of the excludeCellularServices network flag that was released during the iOS 16 cycle. It's a great solution to ensure the VPN doesn't interfere with cellular network features from the cellular provider. Separately - As a user, I'm excited that iOS 18 includes RCS messaging. Unfortunately, RCS messaging is not working when our VPN is active (when checking on the iOS 18 release candidate). My guess is that RCS is not excluded from the VPN tunnel, even when excludeCellularServices is true. It seems like RCS should be added in this situation, as it is a cell provider service. Can RCS be added as a service that is excluded from the VPN tunnel when excludeCellularServices is true? (I've also sent this via feedback assistant, as 15094270.)

Hello, I'm trying to create a widget using the WidgetKit framework. In this part, I'm using Intents along with a DynamicOptionsProvider. As shown in the Medium article below, I want to present multiple options when "Edit Widget" is tapped: https://levelup.gitconnected.com/swiftui-configurable-widget-to-let-our-user-choose-4a54e398f42f However, in this example, the options are provided statically. What I want to achieve is to display a list of devices based on the selected HomeId after the user selects a Home. I’ve set up the interface accordingly, but when I select a Home, the device list does not update. How can I make this work? The two options should be dependent on each other.

I’m implementing a Live Activity that shows some text and a button. When the user taps the button, I want to open the host app. What I’ve done so far: Implemented a LiveActivityIntent to handle the button tap. The intent is triggered successfully. However, the app does not open by using deep link/universal app link. From what I can tell, LiveActivityIntent seems limited to system/background execution and doesn’t bring the app to the foreground. Questions: Is it possible for a LiveActivityIntent to open the app? Is this behavior a documented/intentional limitation? If not supported, is using a Universal Link or deep link the recommended solution for opening the app from a Live Activity button? Any official clarification or recommended best practice would be helpful.

I couldn't find any mention in the Wi-Fi Aware documentation https://developer.apple.com/documentation/WiFiAware about the possibilities of the Wi-Fi Aware connection during the app working in the background execution mode (background state). Does the framework keep the connection alive when the app goes to the background state? Is there anything similar concept to CoreBluetooth state restoration available in the case of the Wi-Fi Aware framework?

Will UVC native support come for the Iphone as well? So, using external cameras with the ipad is greatly beneficial, but for the iphone, it can make it a production powerhouse! So, have there been discussions around bringing UVC support for the Iphone as well? and if so, what were your conclusions?

While developing our driver, we've noticed that the *.ips report that contains the stacktrace of the crash is not always generated. I'm wondering why this report may not get generated, or if there's anything specific to do to guarantee it gets generated.

Hello, We are testing Wallet passes with iBeacons in iOS 26 Beta. In earlier iOS releases, when a device was in proximity to a registered beacon, the corresponding pass would surface automatically. In iOS 26 Beta, this behavior no longer occurs, even if the pass is already present in Wallet. I have not found documentation of this change in the iOS 26 release notes. Could you please confirm whether this is expected in iOS 26, or if it may be a Beta-specific issue? Any pointers to updated documentation would be appreciated. Thank you.

We persist ApplicationTokens in a storage container that ShieldConfigurationExtension has access to. In rare, cases all the ApplicationTokens for a user seem to change. We know this because the Application parameter passed into configuration(shielding application: Application) -> ShieldConfiguration function has a Token that does not match (using == ) any of the ones we are persisting in storage. Interestingly, the persisted ones still work, so I don't believe storage has gotten corrupted or anything. We can use them to add or remove shields, we can use them to display labels of the apps they represent, etc. But they don’t match what’s passed into the ShieldConfiguration extension. If the user goes into the FamilyPicker at this point and selects an app of a token that we are already persisting, the FamilyPickerSelection will have a token matching the new one that is passed into ShieldConfigurationExtension, not the one we persisted when they last selected that app. This leads me to believe the tokens are updated/rotated in some cases. When and why does this happen, and how can we handle it gracefully?

Hello there, I have a problem reaching the CloudKit dashboard. Every time I login, the login successes but then I get the error: An error has caused this web page to stop working correctly. This also happens when I click on the Button CloudKit dashboard. Then I can reload the page, but the same errors occurs again and again. Can someone help me with this problem? Thank you very much

Dear Screen Time Team! The current 6 MB memory limit for the DeviceActivityMonitor extension no longer reflects the reality of modern iOS devices or the complexity of apps built on top of the Screen Time framework. When Screen Time APIs were introduced with iOS 15, hardware constraints were very different. Since then, iPhone performance and available RAM have increased significantly…but the extension memory limit has remained unchanged. My name is Frederik Riedel, and I’m the developer of the screen time app “one sec.” Our app relies heavily on FamilyControls, ManagedSettings, and DeviceActivity to provide real-time interventions that help users reduce social media usage. In practice, the 6 MB limit has become a critical bottleneck: The DeviceActivityMonitor extension frequently crashes due to memory pressure, often unpredictably. Even highly optimized implementations struggle to stay within this constraint when using Swift and multiple ManagedSettings stores. The limit makes it disproportionately difficult to build stable, maintainable, and scalable architectures on top of these frameworks. This is not just an edge case…it directly impacts reliability in production apps that depend on Screen Time APIs for core functionality. Modern system integrations like Screen Time are incredibly powerful, but they also require a reasonable amount of memory headroom to function reliably. The current limit forces developers into fragile workarounds and undermines the robustness of apps that aim to improve users’ digital wellbeing. We would greatly appreciate if you could revisit and update this restriction to better align with today’s device capabilities and developer needs. Thank you for your continued work on Screen Time and for supporting developers building meaningful experiences on top of it. Feedback: FB22279215 Best regards, Frederik Riedel (one sec app)

I have a SwiftData flashcard app which I am syncing with CloudKit using NSPersistentCloudKitContainer. While syncing itself is working perfectly, I have noticed a dramatic increase in the app size after enabling sync. Specifically, without CloudKit, 15k flashcards results in the default.store file being about 4.5 MB. With CloudKit, default.store is about 67 MB. I have inspected the store and found that most of this increase is due to the ANSCKRECORDMETADATA table. My question is, does implementing CloudKit normally cause this magnitude of increase in storage? If it doesn’t, is there something in my model, schema, implementation, etc. that could be causing it? Below are two other posts describing a similar issue, but neither with a solution. I replied to the first one about a month ago. I then submitted this to Developer Technical Support, but was asked to post my question in the forums, so here it is. Strange behavior with 100k+ records in NSPersistentCloudKitContainer Huge increase in sqlite file size after adopting CloudKit

Since iOS 18.4 and macOS 15.4 updating the calendar of an (ek)event (to another accounts calendar) or detaching an repeating event throws an error while saving: "Access denied" EKEventStore.save(event, span: .thisEvent, commit: true) catch { "Access denied" }

Hi there 👋🏻 We are facing an issue that started on 24 June 2025 where some users that have an active subscription with an offer are not being able to use/restore their subscription since Transaction.currentEntitlements is empty. We have tried to call the server with this endpoint https://developer.apple.com/documentation/appstoreserverapi/get-transaction-history and it's returning the correct transactions correctly. Any idea what is happening?

Hello, I’m currently reviewing and implementing age assurance and parental approval flows using AgeRangeService and PermissionKit (AskCenter) in the context of Texas regulatory compliance requirements. While the high-level APIs are clear, there are several technical aspects where the intended usage patterns are not fully explicit in the documentation. Clarification on these points would help ensure our implementation aligns with system expectations and regulatory obligations. ⸻ Querying the current approval state for SignificantAppUpdateTopic AskCenter.ask(...) returns Void, and AskCenter.responses(for:) provides an AsyncSequence of approval events. Is there an official or recommended way to determine whether a SignificantAppUpdateTopic has already been approved when the app launches, or is listening for future responses events the only supported mechanism? ⸻ Behavior of AskCenter.responses(for:) regarding past approvals When subscribing to AskCenter.responses(for:): • Does the stream replay previously recorded approval or decline decisions? • Or does it only emit events that occur after subscription? This affects whether the listener must be registered early in the app lifecycle. ⸻ Recommended lifecycle timing for registering a responses(for:) listener What is the intended or recommended time to register a responses(for:) listener? • At application launch • Immediately before calling ask(...) • When entering a specific gated feature Clarification on the expected lifecycle usage would be helpful. ⸻ Repeated calls to ask(...) after approval If AskCenter.ask(...) is called again for the same SignificantAppUpdateTopic after parental approval has already been granted: • Is the request ignored? • Is a new approval request sent to the parent? • Or is the call handled idempotently by the system? ⸻ Delivery of approval results when the child app is not running If a parent approves or declines a SignificantAppUpdateTopic while the child app is not running: • Will the approval decision be delivered as a responses(for:) event on the next app launch? • Or is the app expected to persist approval state locally? ⸻ Persistence of approval state Is the approval decision for SignificantAppUpdateTopic persisted by the system at the OS level, or is the app responsible for storing approval state? Additionally, does the approval persist across: • app restarts? • app deletion and reinstallation? ⸻ Meaning of activeParentalControls.significantAppChangeApprovalRequired How is activeParentalControls.significantAppChangeApprovalRequired determined? • Is this value explicitly configured by a parent (for example via Screen Time)? • Or is it automatically determined by the system based on region, age, or regulatory requirements? ⸻ Relationship between significantAppChangeApprovalRequired and AgeRangeService When activeParentalControls contains significantAppChangeApprovalRequired, is it still expected that apps call AgeRangeService.requestAgeRange(...)? Or can the presence of this flag be treated as sufficient indication that the user is a minor for gating purposes? ⸻ Recommended interpretation of AgeRangeDeclaration Is the intended usage of AgeRangeDeclaration to handle each case individually, or is it acceptable and recommended to interpret the values as different trust levels (for example, self-declared vs. government ID or payment verified)? ⸻ Clarification on these points would help ensure that implementations of age assurance and parental approval flows are consistent with system behavior while meeting regulatory compliance requirements. Thank you for your guidance.

I’m hitting a WeatherKit JWT failure (WDSJWTAuthenticatorServiceListener Code = 2) at runtime even though the entitlement is present in both the signed binary and the embedded provisioning profile. Environment Team ID 5SZLQLQ9MD Bundle ID ParkProfessor.ParkProfessorDisneyland Device / OS iPhone 15 Pro · iOS 17.4.1 (hardware, not simulator) Xcode 15.3 (15E204a) Console output Failed to generate jwt token for: com.apple.weatherkit.authservice Error Domain=WeatherDaemon.WDSJWTAuthenticatorServiceListener.Errors Code=2 "(null)" Entitlement & profile snippets codesign -d --entitlements :- WeatherKitTest.app | grep -A2 weatherkit com.apple.developer.weatherkit security cms -D -i embedded.mobileprovision | grep -A2 weatherkit com.apple.developer.weatherkit What I’ve already tried Regenerated a new development certificate and a new iOS App Development provisioning profile with WeatherKit enabled. Confirmed the capability is selected in Certificates ▸ Identifiers ▸ Profiles and added in Xcode target settings. WeatherKit Terms of Service accepted in the portal. Deleted the app, removed any device management profiles, rebooted the phone, clean-built & ran again. Reproduced the issue in a minimal SwiftUI app that calls: WeatherService.shared.weather(for: CLLocation(latitude: 33.8121, longitude: -117.9190), including: .current) – same Code 2 error. Request It looks like the App ID may need a backend entitlement sync. Could someone from the WeatherKit team please check the status for Team 5SZLQLQ9MD, Bundle ID ParkProfessor.ParkProfessorDisneyland and enable WeatherKit token generation? Thanks!

Hi, I have two issues going on: Creation of macOS VMs requires autologin is enabled: Mon Apr 13 11:27:18 20 anka.log (ankahv) 511: pid 511: installing /Users/veertu/Library/Application Support/Veertu/Anka/img_lib/UniversalMac_15.6.1_24G90_Restore.ipsw... Mon Apr 13 11:27:20 40 anka.log (install) 511: (null): installation failed: Error Domain=VZErrorDomain Code=10007 "The virtual machine failed to start." UserInfo={NSLocalizedFailure=An error occurred during installation., NSLocalizedFailureReason=The virtual machine failed to start., NSUnderlyingError=0xca2c0ced0 {Error Domain=VZErrorDomain Code=-9 "The virtual machine encountered a security error." UserInfo={NSLocalizedFailure=Unable to access security information., NSLocalizedFailureReason=The virtual machine encountered a security error., NSUnderlyingError=0xca3029320 {Error Domain=NSPOSIXErrorDomain Code=22 "Invalid argument" UserInfo={NSLocalizedFailureReason=Failed to get current host key., NSUnderlyingError=0xca30292f0 {Error Domain=NSPOSIXErrorDomain Code=22 "Invalid argument" UserInfo=0xca2a88040 (not displayed)}}}}}} Mon Apr 13 11:27:20 40 anka.log (install) 511: (null): virtual machine stopped with error: Error Domain=VZErrorDomain Code=4 "Transition from state “error” to state “stopping” is invalid." UserInfo={NSLocalizedFailure=Invalid virtual machine state transition., NSLocalizedFailureReason=Transition from state “error” to state “stopping” is invalid.} Mon Apr 13 11:27:20 40 anka.log (install) 511: failed to install macOS: Error Domain=VZErrorDomain Code=10007 "The virtual machine failed to start." UserInfo={NSLocalizedFailure=An error occurred during installation., NSLocalizedFailureReason=The virtual machine failed to start., NSUnderlyingError=0xca2c0ced0 {Error Domain=VZErrorDomain Code=-9 "The virtual machine encountered a security error." UserInfo={NSLocalizedFailure=Unable to access security information., NSLocalizedFailureReason=The virtual machine encountered a security error., NSUnderlyingError=0xca3029320 {Error Domain=NSPOSIXErrorDomain Code=22 "Invalid argument" UserInfo={NSLocalizedFailureReason=Failed to get current host key., NSUnderlyingError=0xca30292f0 {Error Domain=NSPOSIXErrorDomain Code=22 "Invalid argument" UserInfo=0xca2a88040 (not displayed)}}}}}} Running a macOS 26.x VM fails for similar reasons, yet running a 15.x VM works fine: Mon Apr 13 11:20:10 20 0f5d4fe7-edac-4f6d-aebb-f185702f2c25.log (ankahv) 474: pid 474: session started on host 26.4.1 Mon Apr 13 11:20:10 40 0f5d4fe7-edac-4f6d-aebb-f185702f2c25.log (ankahv) 474: 0f5d4fe7-edac-4f6d-aebb-f185702f2c25: failed to start: Error Domain=VZErrorDomain Code=-9 "The virtual machine encountered a security error." UserInfo={NSLocalizedFailure=Unable to access security information., NSLocalizedFailureReason=The virtual machine encountered a security error., NSUnderlyingError=0x76f049e00 {Error Domain=NSPOSIXErrorDomain Code=22 "Invalid argument" UserInfo={NSLocalizedFailureReason=Failed to get current host key., NSUnderlyingError=0x76f049e60 {Error Domain=NSPOSIXErrorDomain Code=22 "Invalid argument" UserInfo={NSLocalizedFailureReason=Failed to create new HostKey., NSUnderlyingError=0x76f049dd0 {Error Domain=NSPOSIXErrorDomain Code=22 "Invalid argument" UserInfo=0x76ec49d60 (not displayed)}}}}}} Mon Apr 13 11:20:10 40 0f5d4fe7-edac-4f6d-aebb-f185702f2c25.log (ankanet) 474: failed to receive packets: Connection reset by peer This is super painful for us to manage since some of our users can't have autologin enabled (like major banks under strict MDM requirements). Or, AWS EC2 Macs which have no VNC enabled at all by default. What's the trick here to make sure we can consistently use virtualization without autologin?

Hello team, I am trying to find out a way to block urls in the chrome browser if it is found in local blocked list cache. I found URL Filter Network very much suitable for my requirement. But I see at multiple places that this solution is only for Enterprise level or MDM or supervised device. So can I run this for normal user ? as my targeting audience would be bank users. One more thing how can I test this in development environment if we need supervised devices and do we need special entitlement ? When trying to run sample project in the simulator then getting below error

The most recent KDK for MacOS Sequoia that appears in the Downloads is for MacOS 15.5 (24F74), but the current version of MacOS Sequoia is 15.6 (24G84) and 15.7 (24G207) is in RC. Is there an ETA for the KDKs for 15.6 (24G84) and 15.7 (24G207) to be made available to download? Many thanks for any help.