There could be a case where-in multiple transparent proxies might exist in the system (for ex., Cisco AnyConnect, GlobalProtect, etc). We want to know if there is a way to order transparent proxies so that the desired transparent proxy gets the request first. During our research, we found a resource which talks about ordering transparent proxies through MDM. https://developer.apple.com/documentation/devicemanagement/vpn/transparentproxy Using this reference, we tried to create a profile and push it through JAMF. Below is the profile that we created and pushed with JAMF. Property List - <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>TransparentProxy</key> <array> <dict> <key>ProviderBundleIdentifier</key> <string>com.paloaltonetworks.GlobalProtect.client.extension</string> <key>Order</key> <string>1</string> </dict> <dict> <key>ProviderBundleIdentifier</key> <string>com.cisco.anyconnect.macos.acsockext</string> <key>Order</key> <string>2</string> </dict> <dict> <key>ProviderBundleIdentifier</key> <string>com.mydomain.transparentproxy</string> <key>Order</key> <string>3</string> </dict> </array> We are not sure if this is the right way to create the profile, though JAMF is not throwing any error while pushing this profile. We see this profile on the local machine as "/Library/Managed Preferences/com.apple.networking.vpn-transparent-list.plist". Is there a way to know if the profile took effect and the order of transparent proxies has changed. Thanks in advance.

10:17:34.335397+0900 Process SpringBoard Bootstrapping failed for <FBApplicationProcess: 0x4d8eca700; app<com.a.b.c>:> with error: <NSError: 0x300a3d1d0; domain: RBSRequestErrorDomain; code: 5; "Launch failed."> { NSUnderlyingError = <NSError: 0x300a54090; domain: NSPOSIXErrorDomain; code: 85> { NSLocalizedDescription = Launchd job spawn failed; }; }

Hi, I’m an enterprise developer, and we distribute our internal iOS app through a direct download link on our company website (not via App Store or TestFlight). The app is properly signed and works fine on most devices including iPhones and regular iPads. However, on iPad Pro 11-inch (4th generation), the app crashes immediately upon launch when installed via the website. Interestingly, if we install the exact same app via Xcode, it runs without issue on the same device. We also tested a third-party enterprise app called "Taipei On", and it showed the same crash behavior when installed via direct web download on the same iPad model. This leads us to believe the issue may be more widespread or specific to this iPad Pro model or recent iOS versions. Furthermore, some of our users with iPhone 15 devices have started experiencing similar crashes recently, even though they had no issues before. Is this a known issue related to enterprise app distribution or IPA installation behavior on certain devices? Any advice or insight from the Apple team or other developers would be appreciated. Thanks!

I'm working on the companion iOS app for my purpose-built MDM system. when I use the following in a .swift file: import DeviceManagement I get the build issue: No such module 'DeviceManagement' When I attempt to add the framework in the Frameworks, Libraries, and Embedded Content settings, DeviceManagement doesn't even show up in the available frameworks. Alll the documentation I can find suggests that is the correct framework to import, but I'm new to this and not sure if I'm just missing something. Some AI help is suggesting that the culprit might be v16.x of Xcode, but I don't know enough to prove that correct or not. Any ideas on why Xcode believes there is no such module? Is there documentation that might help me learn how to make that framework available for my project?

I'm currently implementing a managed app using the new AppConfig specification. I referred to Apple's official documentation: Specifying and decoding a configuration. Based on the example provided in the "Publish your configuration specification" section, I structured my application configuration plist like this: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>configuration</key> <dict> <key>account</key> <dict> <key>username</key> <string>test user</string> <key>password</key> <string>test 123</string> </dict> <key>domain</key> <string>test example.com</string> </dict> </dict> </plist> When I deployed this configuration via my MDM server, the server reported valid for the activation, configuration and asset (which is the plist), but the configuration did not reflect or apply within my app. My app was unable to retrieve these settings. After some troubleshooting, I found that removing the top-level <key>configuration</key> wrapper resolved the issue. The following plist structure successfully pushed the configuration to my app: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>account</key> <dict> <key>username</key> <string>test user</string> <key>password</key> <string>test 123</string> </dict> <key>domain</key> <string>test example.com</string> </dict> </plist> My question is: Is the inclusion of the <key>configuration</key> wrapper (as shown in the Apple documentation example) incorrect for the current AppConfig implementation? Or is this structure intended for a future release (e.g., iOS 26 or beyond) and the documentation implicitly refers to it, causing confusion for current implementation? Any clarification would be greatly appreciated! Thank you!

I created a provisional profile from apple developer portal for my iOS app. The expiry date shown in the profile is 21-April 2026. However, when I build the app with this provisional profile the expiry date shown in the app is 11 Dec, 2025. My iOS distribution certificate expires only in November 2026. I see a embeded.mobileprovision profile inside the app, and it has an expiry of 11-Dec-2025. I did a clean build,, cleared unnecessary profiles from profile folder, created a new provisional profile and tried, but nothing seems help. We have a few apps, and no other app has this issue. We do annual release of all apps together for provisional profile renewal. As this app expiry is different, it will cause lot of difficulty for us next year. Will you please help me to resolve this issue? Thanks.

"If your app includes any links outside the app, or offers any in-app or other purchasing opportunities, make sure these are behind a parental gate" Super Awesome and Kidoz are proving with a parental gate on ad click and they also claim that all ads are manually approved (another criteria for ads in Kids apps). So these two are the only ad networks we can use moving forward. Or we can use ad networks like Admob as well? I dont intend not to be in Kids category - so leaving Kids category is not a choice.

Hello, I am currently attempting to use declarative management to install enterprise application, however I am running into errors. Initially the device was failing to unpac the initial manifest it downloaded. After pulling logs from the device it was revealed that the manifest must include the bundle-version for it to parse as valid. Adding this has allowed for the ipa to be fetched from the server however there is a secondary issue. The application is on the device but is unable to be opened due to the device being unable to validate its integreti. Any additional information would be useful. For completion the working manifest will be pasted below. It should be noted that the manifest below does work when requesting application installs through MDM commands. <***> <items type="array"> <dict> <assets type="array"> <dict> <kind type="string">software-package</kind> <url type="string">https://domain/web/mdm/ios/enterpriseipa/bundle.id</url> </dict> </assets> <key type="dict" name="metadata"> <bundle-identifier type="string">bundle.id</bundle-identifier> <kind type="string">software</kind> <subtitle type="string">app</subtitle> <title type="string">app</title> <bundle-version type="string">x.x.x</bundle-version> </key> </dict> </items> </***> </plist>

ABM has introduced a target date for moving a device from one MDM server to a new one. However, there's nothing in the API for setting that when you use the API to move MDM server Am I missing something or does it just not exist? Thanks Caroline

"To receive payments from Apple, you must add a bank account." As an Apple "Individual" developer, can I accept payments to my corporate card?

Hello, We are working with an iOS app that is distributed as a Public Unlisted App Store app. Our MDM allows us to import the app by URL, but when added this way, the app is marked as unmanaged in the inventory. Because of that, we cannot assign a Managed App Configuration payload to it in the normal way. What we are trying to achieve: Deliver a configuration profile to all enrolled devices before the app is installed. When the user installs the app from the MDM catalog, the app should immediately see the configuration values. Questions we’re hoping to clarify: Is it technically feasible to pre-provision a Managed App Configuration for an app in this scenario, by pushing a .mobileconfig profile to all devices? If yes, what would be the correct payload format and content of such a .mobileconfig file? We’ve tested a profile format we found here that uses com.apple.managed-app-config PayloadType and a ManagedAppConfiguration key with the bundle ID nested inside, but iOS reports this as “payload not recognized.” From what we understand, that may not be part of Apple’s schema. Any guidance from Apple or the community on whether this use case is possible (and, if so, what the valid profile format should look like) would be very helpful. Note: For a complicated company policy, at the moment we are not able to participate in ABM. Thanks in advance!

Hello All, I come to ask a question that I haven't been able to find the docs. I continue to work on implementing declarative management and while working there is a question/concern I have. I have noticed that during some destructive testing, if the device is attempting to fetch a configuration and the server responds with a 503 (or any server related error) then the device will wipe all configurations and attempt to reapply them. Is there any way to prevent this by intercepting status codes or would the only real solution be to force down a temp/test config if the real config can't be fetched from the server?

Hello All, I am currently developing a mobile management system using declarative management and for the most part it is pretty great. There is one consistent issue I have run into and it comes when testing VPP app installs with not enough licenses. When my server detects that it can't provide a license ID it will return a 404, which causes the rest of the DM syncing to stop, and the activation to throw an error. Per the documentation for using simple activation: An array of strings that specify the identifiers of configurations to install. A failure to install one of the configurations doesn’t prevent other configurations from installing The above would imply that if a config fails it should not affect anything else (aside from possibly reporting an error. Am I returning the wrong error code for it to continue or is the behavior correct and the documentation is wrong? Any additional info would be useful

When I try to sign in Managed Apple ID in supervised device there appears a prompt stating that "Apple ID" is a work account.This account must be signed in as a work account on this device.When I click continue it takes to VPN and device management tab where MDM profile already exists. Note:The managed Apple ID has a ICloud subscription for it. When I remove the subscription for the Apple ID and try to sign in, it works. Kindly help on this or advise on any additional steps required to enable sign in for managed Apple ID in this scenario

When an iOS 26.0 device is prepared in supervised mode, wifi connection screen is showing when the device is restarted. This wifi connect appears always on restart. I have tried using Apple Configurator GUI and Command line (cfgutil) command. In both cases, The behavior Wifi screen is showing up on restart for supervised mode. Cfgutil command: cfgutil -C {Certificate} -K {Key} prepare --supervised --name {NAME} --host-cert {Certificate} --skip-all Note: In non-supervised mode and other iOS, the wifi screen is not showing. Apple Configurator version: 2.18 iOS version: 26.0 Device model: iPhone 11 and above. Anyone else facing this issue? Any help is super appreciated.

Recently, we have encountered some users who have been unable to open the enterprise signature application after upgrading to version 18.3.2, without an IPS file. Through system logs, we found that signature verification has occurred SecKeyVerifySignature failed: Error Domain=NSOSStatusErrorDomain Code=-50 "rsa_pub_crypt failed, ccerr=-7" UserInfo={numberOfErrorsDeep=0, NSDescription=rsa_pub_crypt failed, ccerr=-7} Waiting for the information, I will provide the obtained system logs below. The application package name that crashed is com. mobile. moa aa.txt new

There is a longstanding restriction payload for supervised iOS devices that disables "Erase All Content and Settings." We have been experimenting with supervised watches paired with supervised phones that have that payload applied, and yet "Erase All Content and Settings" remains available on the watch. Is this: – a) An error with our payload? Should we be sending something else? – b) A bug in watchOS supervision? – c) A deliberate design choice? If so, what is the rationale for preventing organizations from maintaining this very basic level of control over devices they may be configuring and dispatching into the field?

Hello, We're testing the new allowedExternalIntelligenceWorkspaceIDs key in the MDM Restrictions payload on supervised iPads. According to Apple's documentation, this key expects an "external integration workspace ID", but it's not clear what this specifically refers to. We've tried the following IDs individually (one at a time, as documentation says only one is supported currently): OpenAI Organization ID ChatGPT user email Apple ID used in ChatGPT Google ID used in ChatGPT login The profile installs correctly via MDM and the key is set, but we want to confirm: What exactly is considered a valid "external integration workspace ID" for this key? Is there a way to verify that the restriction is working as intended on the device (e.g. does it limit specific integrations or apps)? Is there an official list of services that currently support this? Any clarification from Apple or other developers with experience on this would be very helpful. Thanks in advance.

Hi, I was looking for advice on the suitable mac to get for a web app development project for university . Would an Apple MacBook Air 2020 M1 8GB RAM 256GB SSD 13.3" macOS Big Sur, be sufficient ?? Or would I need a newer version !

Hello, I’ve run into an issue with a configuration profile on my supervised iPhone. I’m wondering if anyone here might be able to help? The profile contains the allowListedAppBundleIDs key within the restrictions payload. My Apple Watch is paired with the iPhone. The iPhone was supervised manually with Apple Configurator, hence the Apple Watch has not been directly supervised itself. The profile works completely as expected when installed on the phone. As soon as the profile is installed on the iPhone, I can witness the apps on the Apple Watch rearrange themselves as some apps are hidden. So clearly the profile is applying its restrictions to the Apple Watch to some degree. My issue however is that apps listed in the whitelist are hidden from the Watch. The apps that are missing from my Watch are Walkie Talkie, Find My Items, Find My Friends, Messages, Alarm, Remote, Now Playing, Sleep, Meditation and Heart Rate. This is despite the following bundle IDs being listed in the whitelist array: com.apple.findmy.findpeople, com.apple.findmy.finddevices, com.apple.HeartRate, com.apple.SessionTrackerApp, com.apple.NanoWorldClock, com.apple.findmy.finditems, com.apple.Mind, com.apple.NanoOxygenSaturation, com.apple.watchmemojieditor com.apple.NanoSleep com.apple.NanoNowPlaying com.apple.noise com.apple.tincan com.apple.NanoRemote com.apple.NanoAlarm com.apple.private.NanoTimer com.apple.NanoStopwatch I’ve done some testing, but not sure what I’ve found really. I’ve so far identified 3 scenarios. Scenario 1: I have the whitelist profile installed on the iPhone. I download an app that appears in the whitelist from my watch (or at least its iPhone version does). The apps show up on the iPhone automatically and can be launched there. These apps cannot be launched on the watch. Scenario 2: I downloaded a few apps to my watch, that didn’t automatically install on my iPhone at the same time. They were on the whitelist. These ones couldn’t be launched from my Watch. I then downloaded them to the iPhone and they could be launched there (since they were on the whitelist). Scenario 3: A couple of 3rd party apps on the whitelist could be downloaded and launched from the watch with the whitelist installed. It seems as though there are different kinds of Apple Watch app and this is what I’ve read elsewhere. First of all there are Watch-only apps, which do not automatically install a companion iPhone app. Secondly there are companion apps, which when installed from the Watch App Store download their companion app to the iPhone in the background. Someone please correct me - I’m bound to be overlooking something here. So maybe the apps that when installed from Watch automatically install on iPhone and can only be launched from the iPhone have a separate bundle ID for their Watch app which I haven’t included? Apps that are on the whitelist AND do not automatically install an iPhone app AND can be launched from the Watch, include: solstice What3words So maybe these do not need a companion app, but have the same Bundle ID as their iPhone app? However, I’m still not sure why many stock Apple Watch apps are missing from the Watch…. The most obvious answer is that I’ve got their Bundle IDs wrong, but I don’t think I have given I extracted the bundle IDs from the App Store pages of the Apple WatchOS apps. I noticed at this Apple Support page (https://support.apple.com/en-gb/guide/deployment/dep34c5cd30f/1/web/1.0) that there is no mention of whitelisting or blacklisting apps on WatchOS using MDM, yet something definitely happens on the watch when the configuration profile is installed on the iPhone. Furthermore, if I tap on a configuration profile, which comprises a blacklist, on my iPhone it will ask me if I want to install it on the iPhone or Watch. The same pop-up question doesn’t happen when the profile contains a whitelist. All this to say, I’m massively confused as to why I can’t get this working. I’d really appreciate anyone’s advice which is bound to be expert. Thank you