I need to verify my domain for Apple Pay but I'm on Shopify. Domain: blissta.co File IS accessible: https://blissta.co/.well-known/apple-developer-merchantid-domain-association But verification fails because it's a redirect, not direct hosting. Shopify doesn't allow .well-known folder creation. Has anyone solved this? Need either: Way to make Apple accept redirects Shopify workaround for direct file hosting Manual verification from Apple Using Authorize.net gateway. Case #102711828925

VPP API v2 returns 9609 "Unable to find the registered user." when I disassociate assets from an existing user. Repro step: 1. Create user POST https://vpp.itunes.apple.com/mdm/v2/users/create { "users": [ { "clientUserId": "client-1", "managedAppleId": "valid managed apple id" } ] } => user is associated 2. Retire user POST https://vpp.itunes.apple.com/mdm/v2/users/retire { "users": [ { "clientUserId": "client-1" } ] } => user is retired 3. Recreate user with the same clientUserId POST https://vpp.itunes.apple.com/mdm/v2/users/create { "users": [ { "clientUserId": "client-1", "managedAppleId": "valid managed apple id" } ] } => user is associated 4. Associate asset POST https://vpp.itunes.apple.com/mdm/v2/assets/associate { "assets": [ { "adamId": "408709785" } ], "clientUserIds": [ "client-1" ] } => asset associated 5. Disassociate asset POST https://vpp.itunes.apple.com/mdm/v2/assets/disassociate { "assets": [ { "adamId": "408709785" } ], "clientUserIds": [ "client-1" ] } => {"errorNumber":9609,"errorMessage":"Unable to find the registered user."} Notes associate API works fine with the same payload. disassociate work with v1 API.

We have couple of devices that are registered into Platform SSO, and we have been noticing an issue when the user tried to login. After the users enters the password and hit the return key nothing happens, they need to hit the return key probably 10-15 times in order for the login to happen, the password entered is the correct one and it's just that hitting the return key doesn't invoke the login. On checking the log of the device one unusual thing that we noticed as compared to a different device where the login is working in a single go is that the AppSSOAgent or AppSSODaemon process were not getting invoked

In Device management profile, VPN.VPN.OnDemandRulesElement Action->Disconnect Example payload: OnDemandEnabled1OnDemandRules ActionDisconnectInterfaceMatchCellular When install my vpn payload with above configuration, I was unable to connect vpn manually when i try with wifi interface Based on the doc, VPN should tear down when i connect with specific type interface(here cellular) i was unable to connec the vpn when i'm in cellular network good but when i connect to wifi still the same is happening. Is this a bug? tried in ios 18

Before iOS26.1, allowCamera set false, all app can't use camera. On iOS26.1, allowCamera set false, removes camera icon from the Home Screen, but third app can still use camera, such as Safari and other apps that can call camera. Is it a bug or a new features？

I desperately need help with this issue. Are there any known issues regarding MDM profiles not installing on iPhone 17? Too many cases are being reported.

Hi Apple Development forums, I am having trouble getting a Wireguard VPN config setup to automatically disconnect on all domain requests other than one specific domain. I have my .mobileconfig designed as so: <dict> <key>Action</key> <string>EvaluateConnection</string> <key>ActionParameters</key> <array> <dict> <key>Domains</key> <array> <string>service.domainname.com</string> </array> <key>DomainAction</key> <string>ConnectIfNeeded</string> <key>ProbeURL</key> <string>https://service.domainname.com/</string> </dict> </array> </dict> <dict> <key>Action</key> <string>Disconnect</string> <key>DNSDomainMatch</key> <array> <string>*.com</string> <string>*.org</string> <string>*.net</string> </array> </dict> <dict> <key>Action</key> <string>Disconnect</string> </dict> </array> The issue I'm having is regardless of whether I note a *.com or simply have the action Disconnect noted - the VPN stays connected after navigating to https://service.domainname.com. would anyone have any thoughts on this? Or am I missing something here?

Hi Apple Community, At WWDC25, introduced a native device migration feature with iOS/macOS 26 and Apple Business Manager that promises seamless migration from one MDM to another without wiping devices or manual re-enrollment. That said, while testing this in iOS/macOS 26 beta, we ran into an issue: the Wi-Fi settings deployed by the old MDM aren’t retained during the migration. This means devices lose Wi-Fi connectivity partway through, and users have to manually reconnect before the migration to the new MDM can continue. This interrupts what should be a smooth, hands-off process. We wanted to ask if this is a known issue or limitation with the current beta? Are there any recommended ways to avoid losing Wi-Fi profiles during this migration window? Will this improve in future updates so that the Wi-Fi connection is preserved or seamlessly handed off to the new MDM? Any tips, workarounds, or official guidance Apple can share on best practices for handling Wi-Fi profiles during ABM-native device migrations would be hugely appreciated. Added Feedback with FeedBackAssistant ID : FB20150763 Thanks in advance.

Environment Devices: e.g., iPhone 12 mini, iPhone 16 (multiple units) OS: iOS 26 beta 2 and beta 4 (23A5297m) Distribution: Apple Enterprise Program (In-House), deployed via MDM InstallApplication Tooling: Xcode (latest available for iOS 26 betas) Summary Apps signed for Enterprise (In-House) distribution install successfully on iOS 26 betas via MDM, but terminate immediately on launch. The same builds run if installed from Xcode on the same devices. This is a regression from pre-iOS 26 versions where Enterprise builds installed via MDM launched normally. Steps to Reproduce Archive an iOS app and export for Enterprise (In-House) distribution. Deploy the .ipa via MDM using InstallApplication to a device on iOS 26 beta (e.g., 23A5297m). Tap the app icon to launch. Actual Result The app quits instantly on launch. System logs show launchd/runningboard errors, including NSPOSIXErrorDomain Code=85 (“Bad executable (or shared library)”): runningboardd(RunningBoard)[34]: Process start failed with Error Domain=NSPOSIXErrorDomain Code=85 "Bad executable (or shared library)" UserInfo={NSLocalizedDescription=Launchd job spawn failed} runningboardd(RunningBoard)[34]: Launch failed with Error Domain=NSPOSIXErrorDomain Code=85 "Bad executable (or shared library)" SpringBoard(FrontBoard)[35]: Bootstrapping failed ... NSUnderlyingError = { NSLocalizedDescription = Launchd job spawn failed; } Expected Result Enterprise-signed builds installed via MDM should launch as they did on iOS 25.x and earlier. Regression? Works on iOS versions prior to 26. Works on iOS 26 betas when installed from Xcode (developer-signed run). Fails only for Enterprise (In-House) builds delivered via MDM. Additional Notes / Possibly Related We also reproduced a similar failure mode with a minimal Safari Web Extension project: it installs and appears under Settings → Safari → Extensions, but enabling it and opening Safari produces: “ is no longer available.” Building a fresh project with a new bundle ID shows the same behavior on iOS 26 beta (23A5297m). Logs contain: Error occurred during transaction: The provided identifier "" is invalid. Running from Xcode (debug build) works. Workarounds None identified for Enterprise/MDM distribution. Only Xcode-installed builds run. Impact Blocks Enterprise deployment to our fleet on iOS 26 betas. Feedback / Attachments Included: sysdiagnose from an affected device, minimal Xcode project demonstrating the issue, Enterprise-exported app, and reproduction notes. Happy to share additional logs or perform targeted tests if needed. Request Can Apple confirm whether this is a known regression vs. a policy/validation change in iOS 26 for Enterprise/MDM installs? Any guidance on a short-term mitigation or build/signing change we can apply would be appreciated.

We are facing an issue with Platform SSO registration on macOS devices for AD-bound user accounts with Microsoft EntraID configuration. We are using the Platform SSO payload on macOS devices integrated with Entra ID, and it works as expected — registration completes successfully, and the password syncs with the Entra ID password. However, when we try the same on macOS devices with AD-bound (mobile) user accounts, the registration does not complete. To elaborate, the process successfully completes the initial WebView authentication but fails at the stage where Apple prompts for the password to sync the local macOS user’s password with the Entra ID password. It does not display any error, and even after entering a valid password, the process does not proceed further. However, when we try the same on a non-AD user account, it works fine. We have checked with Microsoft, and they confirmed that there are no restrictions on their side for AD-bound accounts. Since the issue appears to occur at the Apple system level, they advised us to reach Apple teams on this. Could you please check and let us know how we can proceed with this? Payload used: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>PayloadContent</key> <array> <dict> <key>AuthenticationMethod</key> <string>Password</string> <key>ExtensionIdentifier</key> <string>com.microsoft.CompanyPortalMac.ssoextension</string> <key>PayloadDisplayName</key> <string>Extensible Single Sign-On Payload</string> <key>PayloadIdentifier</key> <string>com.apple.extensiblesso.B408A658-3DAF-41FF-8A5D-AE77B380CB7B</string> <key>PayloadType</key> <string>com.apple.extensiblesso</string> <key>PayloadUUID</key> <string>D506CAFD-C802-41F2-9C3E-DF5289C315FF</string> <key>PayloadVersion</key> <integer>1</integer> <key>PlatformSSO</key> <dict> <key>AccountDisplayName</key> <string>EntraID</string> <key>AuthenticationMethod</key> <string>Password</string> <key>EnableCreateUserAtLogin</key> <true/> <key>LoginFrequency</key> <integer>3700</integer> <key>LoginPolicy</key> <array> <string>AttemptAuthentication</string> </array> <key>NewUserAuthorizationMode</key> <string>Admin</string> <key>UseSharedDeviceKeys</key> <true/> <key>UserAuthorizationMode</key> <string>Admin</string> </dict> <key>ScreenLockedBehavior</key> <string>DoNotHandle</string> <key>TeamIdentifier</key> <string>UBF8T346G9</string> <key>Type</key> <string>Redirect</string> <key>URLs</key> <array> <string>https://login.microsoftonline.com</string> <string>https://sts.windows.net</string> <string>https://login.partner.microsoftonline.cn</string> <string>https://login.chinacloudapi.cn</string> <string>https://login.microsoftonline.us</string> <string>https://login.microsoft.com</string> <string>https://login-us.microsoftonline.com</string> </array> </dict> </array> <key>PayloadDisplayName</key> <string>Platform SSO</string> <key>PayloadIdentifier</key> <string>42GBHOLAP04621.1BD5B6D9-640B-4DC3-9275-56DDD191A5FB</string> <key>PayloadType</key> <string>Configuration</string> <key>PayloadUUID</key> <string>58548FC6-38D9-4B28-9EDF-BEEAB03BAB23</string> <key>PayloadVersion</key> <integer>1</integer> </dict> </plist>

I have created a jwt token with headers { 'typ': 'JWT', 'alg': 'RS256' } and claim as : { 'iss': dep server UUID from Accounts call, 'iat': epoc time in seconds, 'jti': random uuid, 'service_type': 'com.apple.maid' } And signed the token with private key created during DEP MDM server creation. On the device I see Verification error when tried to login with Managed Apple account. In ABM, Access management setting was set to Managed Devices /Supervised only. Any help would be appreciated.

Target Device: iPhone 13, iOS 18.5, enroll to MDM by enrollment profile Command: Response: Anyone could help?

Hi, I'm glad to hear that the service discovery process is improved on iOS/iPadOS 18.2 mentioned here. https://support.apple.com/en-ca/guide/deployment/dep4d9e9cd26/1/web/1.0 I tried it on my development MDM server. Set default MDM for iPad to my development MDM server on Apple Business Manager. Call the new API https://developer.apple.com/documentation/devicemanagement/account_driven_enrollment_profile and 200 OK is returned However the service discovery fails with the following error. Invalid well-known response for https://{my email's comain name}/.well-known/com.apple.remotemanagement?user-identifier={my email}&model-family=iPad: <NSHTTPURLResponse: 0x300a9f420> Invalid well-known response for https://axm-servicediscovery.apple.com/mdmBaseURL?user-identifier={my email}&model-family=iPad: <NSHTTPURLResponse: 0x3009047a0> It seems fallback process to https://axm-servicediscovery.apple.com/mdmBaseURL actually works but it returns 404 Not Found error. How can we use this awesome feature? Thank you :)

Hi, I am experiencing an issue with in-house apps on iOS 18. When the MDM profile is removed, newly installed in-house apps cannot be opened. However, previously installed in-house apps still work fine until the device is restarted. Context: Our in-house apps are not distributed via MDM but through an internal company app store. These apps are signed with an enterprise certificate and have been working fine on previous iOS versions. Steps to reproduce: Install an in-house app while the MDM profile is active -> The app works fine. Remove the MDM profile. Install a new in-house app (signed with the same enterprise certificate) The newly installed app does not open at all. The existing in-house apps installed before MDM removal continue to work normally. Restart the device. Now, even the previously installed in-house apps no longer open. Observed behavior: The newly installed in-house app does not open, and no trust prompt appears in Settings > General > VPN & Device Management. The previously installed in-house apps continue to function normally until the device is restarted. After restarting, none of the in-house apps open anymore. Is there a now restriction in iOS 18 regarding in-house app installation after MDM removal? Any insights or solutions would be greatly appreciated! Thank you.

Can I upload custom app onto the ABM? if yes then how can we install it into the user's devices?

I am needing to access the ABM API via C#. Searching has directed me to use BouncyCastle. I have downloaded the PEM file. However, using the following: using (var reader = File.OpenText(pemFilePath)) { var pemReader = new PemReader(reader); var keyObject = pemReader.ReadObject(); I get the error "problem creating EC private key: System.NullReferenceException: Object reference not set to an instance of an object."

Our organization is deploying passwordless authentication. Instead of using a password, employees must use the Microsoft Authenticator app to complete the login process. Unfortunately, employees with passwordless authentication can't complete the login on the Wi-Fi Captive portal with SAML authentication. The reason is that when an employee switches to the Microsoft Authenticator app, the Apple CNA (Apple Network Captive Assistant) disappears. As a result, the authentication process breaks. According to the https://developer.apple.com/news/?id=q78sq5rv source, iOS 14+ devices support the RFC-8908 standard. Unfortunately, we couldn't find a reliable source on how this feature works on iOS devices. The question is: Is it possible to automatically forward Wi-Fi clients to the SAML authentication portal in the default browser app (for example, Safari) after connecting an employee to Wi-Fi?

We are expering frequent delays recently when associating a device serial with the adamid of an app in our business manager account. I get an event id back when calling the /associate api but when i check the status of that event id is can be sat in a pending state for sometimes several hours. Need to understand why and if its a configuration issue

Why don't obtain equipment list (https://mdmenrollment.apple.com/server/devices) interface returns "device_family" contour information. This interface only returns some fields, and many field values are not returned

I have created a configuration profile which basically just turns off notifications for Shortcuts app but I am unable to install it on my iPhone as I am getting the following error “This profile can be installed on a supervised device only” can someone please help me with this? Would also appreciate if you have another way to turn off shortcuts notifications permanently since when I turn it off via screen time it keeps turning itself ON every couple of days.