Hello, I’ve enrolled in the Apple Developer Program for over 3 days now, and my enrollment is still pending. I have tried Apple Developer Program Support but, no response. How long does it usually take for my enrollment to be accepte? Especially for someone outside of the US. Thanks.

Hello everyone! I'm a newly graduated Computer Engineer living in Türkiye. I've been developing my skills in the iOS field for a while now. But sometimes I get lost and don't know what to do. I've just joined this community and have a request for you. I'd be very grateful if you could share your own advice, experiences you've had along the way, and how you successfully overcame them. I'm open to all kinds of positive or negative feedback. Self-improvement is paramount to me.

Area: Software Update Type of Feedback: Application Bug Description Device: iPhone 13 Pro running iOS 26 Build environment: Xcode 16.4 Problem description: When a text field has secureTextEntry = YES and Password Autofill / Passkeys is active, the autofill panel is not included in the rect reported from the keyboard notifications (UIKeyboardFrameEndUserInfoKey or others). As a result, when calculating the offset to move the screen up and reveal the hidden input field, the field is not displayed correctly because the reported keyboard height is smaller than the actual visible height. Observed behavior: This only occurs on devices running iOS 26 built with Xcode 16.4. On previous versions of iOS, with the same settings (secureTextEntry and Autofill active), the rect correctly includes the autofill panel height, and the UI works as expected. I tested with both UIKeyboardDidShowNotification and UIKeyboardWillChangeFrameNotification, and in both cases the behavior is the same: the height is incorrect (smaller than expected with the autofill panel). What I expect / questions: That UIKeyboardFrameEndUserInfoKey (or the related notification) correctly reports the total area covered by the keyboard, including any password autofill panel, when secureTextEntry is active. That the new behavior in iOS 26 be documented if this omission is intentional, or otherwise considered a bug if it is not. If there is any official workaround suggested by Apple for developers affected by this issue while a fix is provided. Thank you for your support.

I set iOS 26 to install overnight, put my iPhone 16 Pro on the MagSafe charger, watched it charge just fine, and went to sleep. When I woke up the iPhone showed the “plug into power” dead battery screen. I took it off MagSafe and put it back on. A half hour later the phone was warm but still wouldn’t power on, just showed the battery screen with a little red in it. I took it off MagSafe and plugged it into my iPad charging brick with USB cable to give it more power, still it did not turn on. I tried holding all the buttons to try to force a restart but didn’t work. For anyone else encountering this, do this to enter DFU mode and restore it. I had to do it a few times before I got the timing right. Plug into your Mac and open Finder (or apparently a PC with Apple Devices or iTunes) Press and quickly release volume up Press and quickly release volume down Press and hold right side button When the battery disappears and screen goes black, hold volume down and continue holding side button After a couple seconds release the side button and continue holding volume down A prompt to allow connecting to the iPhone should appear after a couple seconds, click Allow, and it’ll say the iPhone entered DFU mode - proceed to restore the firmware

I noticed the water lock feature isn’t in the control center after updating to WatchOS 26

Both Apple and third-party apps in CarPlay are not displaying properly after updating to iOS 26 public beta two. I submitted feedback, wondering if anybody else had this problem and have solved it. The only apps that appear to be working normally are map apps like Apple Maps, Google Maps and Waze. The others show only background, but if you tap on the touchscreen it will perform an action as if the tile/link is there, but invisible

Updated iPhone to 26 beta 2, everything is ok but battery, battery is changed, not original. My phone can't charge higher than 1% and turns off every 5 minutes, even connecting to wireless charger and cable at the same time don't work, restored iPhone thru iTunes.I hope I will be able to install new beta without any problems because loving the new design,hoping for the best. Thanks.

Hi everyone, We're facing an issue with Universal Links on iOS 18 and above. The problem seems related to how iOS handles redirects before reaching a Universal Link. ✅ Working Link (direct): When we open this direct Universal Link, the app opens as expected: 👉 https://dl.punchh.com/deeplinks/logansroadhouse/ ❌ Not Working (redirected link): This marketing/tracking link eventually redirects to the above Universal Link, but on iOS 18+, it opens the App Store or a browser instead of the app: 👉 https://ip2.loyalty.logansroadhouse.com/ls/click?upn=... The same redirect link works fine on iOS 17 and below — it opens the app.

I'm suddenly receiving zero products from SKProductsRequest, even though this setup previously worked without issues. The debugger shows that both of my product identifiers are now being returned under invalidIdentifiers, and response.products is empty. I’ve confirmed the following: There are no pending agreements in App Store Connect. The subscription is active and configured correctly. The product identifiers match exactly with what’s defined in App Store Connect. Here is the delegate method I'm using (unchanged from when it previously worked): extension UpgradeViewModelProvider: SKProductsRequestDelegate { func productsRequest(_ request: SKProductsRequest, didReceive response: SKProductsResponse) { if response.products.count > 0 { delegate.send(.onProduct(response.products)) } } } Since everything was functioning before, I’m trying to understand what may have caused the identifiers to suddenly be marked as invalid. Any guidance or suggestions on what to check next would be greatly appreciated.

I have filed 27 bug reports against macOS using Feedback Assistant and none have had any sort of follow-up. I'm wondering if anyone at Apple looks at these reports? A few of these involve accessibility features that are not working (for example: speak announcements doesn't work -- and yes, my feedback is much more detailed than "doesn't work"). I would have thought issues with accessibility would be a high priority for Apple to fix quickly. Another report is that Grapher uses black text on dark gray making it very difficult to see the formula you enter. This should be a one-line code fix. These two, and 25 other bug reports have seemingly been ignored. Several of these reports indicate more than 10 similar reports, yet go unfixed. Leading me back to my opening question -- does anyone at Apple read these reports? I'd like to think I'm helping Apple to deliver a more perfect product but I feel like I'm wasting my time writing detailed bug reports. Is there another way to bring these to Apple's attention?

Title says it all, so I get to 5 minutes left, and then the error message 'failed to prepare update' appears. I've done this for about a week now and the same thing happens. Does anyone have any insight to this problem?

I’d like to develop an online marketplace and service provider iOS app similar to the Airbnb app for my startup company. I need standard functions like email registration, user profile, listings etc. And special functions like: location tracking, map, booking system, embedded messenger for the host and customers, internet surveillance camera and rating system, payment system.I have two questions:-How much does it cost?-Is it possible to develop it by myself and how long?(no programming background)

Hello, In my App.xcdatamodeld I have an entity called File. When I am building the project with Xcode, file FileEntity+CoreDataProperties.swift is generated. After upgrading Xcode to version 26.0 (17A324), I am getting the warning: Public import of 'CoreData' was not used in public declarations or inlinable code Any idea how to get rid of this warning since it's a generated file and I can't see any option to change it?

Hello, Can anyone tell me what this means? Or if it's normal? I'm seeing about 10% battery drain per day on sleep, and pmset -g log shows wakes nearly every minute. 2025-06-10 17:10:35 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 5 secs 2025-06-10 17:10:43 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 6 secs 2025-06-10 17:13:49 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 8 secs 2025-06-10 17:14:01 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 6 secs 2025-06-10 17:14:10 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 6 secs 2025-06-10 17:15:01 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 6 secs 2025-06-10 17:16:31 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 6 secs 2025-06-10 17:18:07 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:94%) 6 secs Looking at one section of them: 2025-06-10 22:00:46 -0700 DarkWake DarkWake from Deep Idle [CDNP] : due to smc.70070000 wifibt SMC.OutboxNotEmpty/ Using BATT (Charge:90%) 6 secs 2025-06-10 22:00:46 -0700 WakeDetails DriverReason:smc.70070000 - DriverDetails: DriverReason:wifibt - DriverDetails: DriverReason:SMC.OutboxNotEmpty - DriverDetails: 2025-06-10 22:00:46 -0700 HibernateStats hibmode=3 standbydelaylow=0 standbydelayhigh=0 35177 2025-06-10 22:00:46 -0700 WakeTime WakeTime: 0.094 sec 2025-06-10 22:00:46 -0700 Kernel Client Acks Delays to Sleep notifications: [Port-USB-C driver is slow(msg: SetState to 0)(60 ms)] 2025-06-10 22:00:46 -0700 Kernel Client Acks Delays to Wake notifications: [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(77 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(77 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(118 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(121 ms)] [Port-USB-C driver is slow(msg: SetState to 0)(59 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(78 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(120 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(123 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(78 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(78 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(116 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(120 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(78 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(78 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(118 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(120 ms)] [powerd is slow(5915 ms)] [Port-USB-C driver is slow(msg: SetState to 0)(64 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(78 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(78 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(119 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(122 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(77 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(77 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(117 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(120 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(76 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(76 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(118 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(119 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [Codec Output driver is slow(msg: DidChangeState to 1)(76 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(118 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(121 ms)] [Port-USB-C driver is slow(msg: SetState to 0)(58 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(77 ms)] [Codec Output driver is slow(msg: WillChangeState to 1)(77 ms)] [AppleConvergedIPCOLYBTControl driver is slow(msg: SetState to 1)(117 ms)] [AppleMultiFunctionManager driver is slow(msg: SetState to 1)(120 ms)] [RTBuddy(ANS2) driver is slow(msg: SetState to 2)(68 ms)] [AppleCS42L84Audio driver is slow(msg: DidChangeState to 1)(76 ms)] 2025-06-10 22:00:48 -0700 com.apple.sleepservices.sessionTerminated SleepService: window has terminated. 2025-06-10 22:00:52 -0700 Assertions PID 323(powerd) Released InternalPreventSleep "PM configd - Wait for Device enumeration" 00:00:05 id:0x0xd00009032 [System: PrevIdle] 2025-06-10 22:00:52 -0700 Sleep Entering Sleep state due to 'Maintenance Sleep':TCPKeepAlive=active Using Batt (Charge:90%) 14 secs 2025-06-10 22:00:53 -0700 Assertions Summary- [System: PrevIdle] Using Batt(Charge: 90) 2025-06-10 22:00:53 -0700 Wake Requests [process=mDNSResponder request=Maintenance deltaSecs=6474 wakeAt=2025-06-10 23:48:48 info="DHCP lease renewal"] [*process=dasd request=SleepService deltaSecs=979 wakeAt=2025-06-10 22:17:13 info="com.apple.dasd:501:com.apple.intelligenceplatform.IntelligencePlatformCore.Pipeline.FastPass"] [process=powerd request=TCPKATurnOff deltaSecs=227969 wakeAt=2025-06-13 13:20:22] [process=powerd request=CSPNEvaluation deltaSecs=2005 wakeAt=2025-06-10 22:34:18] [process=powerd request=UserWake deltaSecs=7086 wakeAt=2025-06-10 23:59:00 info="com.apple.alarm.user-visible-com.apple.donotdisturb.server.ScheduleLifetimeMonitor.timer,619"]

Hello. I need to develop for iOS 18. I've recently updated Xcode and it says I have to download ios 26 platform. I don't need it, but I can no longer build my existing projects against ios 18, even though Xcode says it's still installed and used 13 days ago. How to I remedy this?

When I try to create a post in Apple Support Community, it forces me to create a new account (for some supersmart reason because my apple account is apparently not enough). In this process, I am required to pick a new username and choose my communications preferences. The next screen? 403 Forbidden Error page.

I am writing to report an issue encountered while testing the iOS 26 beta. It appears that adding VPN configurations is currently not possible in this version. Specifically, attempts to add a new VPN configuration through the Settings app or via programmatic configuration profiles are unresponsive. As VPN functionality is essential for a number of development and enterprise use cases, I would appreciate it if your team could confirm whether this is a known issue, or provide guidance on any changes to VPN configuration handling in iOS 26. Please let me know if additional diagnostic information or logs would be helpful. Thank you for your support and for providing access to the iOS 26 beta. Best regards, Majid

With ios 26 the chapter images are not updating anymore. At first I thought this is carlay related but it also occures when the phone is connected only through USB or bluetooth to play a podcast. I tried Apple podcasts and other apps like Pocketcast or audible. Same problem. The phone shows the correct chapter image while my car shows the inital image all the time. Even tried a different car :-) I checked focus and settings but found nothing related. With ios18 everything works fine. Any ideas?

I have developed three apps using the Screen Time API. The following are common problems I encountered in the three apps: DeviceActivityMonitorExtension is automatically killed after running for a few days (frequently) The same DeviceActivityEvent in DeviceActivityMonitorExtension is triggered twice during eventDidReachThreshold (especially obvious in iOS18.5) Screen Time authorization is automatically canceled for no reason (occasionally) I hope to get help