After the update of the Xcode to latest version, I’m getting “No Such Module Unity Framework” as error. the complete information is below. I had to update the Xcode and the O.S as per the Apple Requirement from my older version of 14.x to latest 16.3. I had no issued running the Unity within my iOS App till the recent update. Previous Setup: Unity was successfully integrated into this iOS app and running fine before the update. As it was working till the Xcode version 14.3, i have not changed any code relevant to Unity. What I’ve Tried: a. Added UnityFramework.framework to “Link Binary with Libraries” and marked it as “Embed & Sign”. b. Verified Framework Search Paths include $(PROJECT_DIR)/UnityProject/build/Debug-iphoneos c. Cleaned build folder, deleted Derived Data d. Checked [CP] Embed Pods Frameworks step in Build Phases Stuck On: Xcode still throws "No such module 'UnityFramework'" — it’s as if the framework isn’t being built or seen from my main project. Request for Help: Has anyone encountered this issue post-Xcode 16.3 update from 14.x. I’d really appreciate any guidance, updated workflows, or even a checklist of steps for properly integrating Unity into an existing iOS app with the new Xcode build system.

Dear team, I am reaching out to inquire about potential daily usage limits for the CoreLocation geocoding services. While I understand that there is a known limit of approximately 50 requests per minute, I have received information suggesting there may also be a daily cap of 25,000 requests. Could you please confirm whether such a daily limit exists? Additionally, I would appreciate any recommendations you might have for increasing the allowable number of daily geocoding requests, if possible. Thank you in advance for your support.

Issue with SwiftData: “no such table: ZAPPSETTINGS” and SQLite I/O error on app launch Hello, I’m encountering persistent errors with SwiftData in my SwiftUI app related to Core Data’s underlying SQLite database. Despite defining my models correctly, the app fails to initialize the persistent store, throwing the following error on startup: CoreData error: SQLCore dispatchRequest: no such table: ZAPPSETTINGS. I/O error opening database at /.../default.store. SQLite error code:1, NSSQLiteErrorDomain=1. File “default.store” couldn’t be opened. Context The error only appears concerning my AppSettings model. I have another model, LocationPoint, which appears correctly defined and used. I have tried deleting the app, resetting the device, and cleaning builds but the error persists. The error message suggests the database file is present but the table for ZAPPSETTINGS (the Core Data table for AppSettings) does not exist. Code Samples Main App Entry import SwiftData import SwiftUI @main struct Krow3_0App: App { @State private var userLocationManager = UserLocationManager() @State private var geocodingViewModel = GeocodingViewModel() @State private var locationSearchViewModel = LocationSearchViewModel() @State private var router = Router() var body: some Scene { WindowGroup { LaunchView() .environment(userLocationManager) .environment(geocodingViewModel) .environment(locationSearchViewModel) .environment(router) .modelContainer(for: [LocationPoint.self, AppSettings.self]) } } } AppSettings Model import Foundation import SwiftData @Model class AppSettings { var isMetric: Bool init(isMetric: Bool = false) { self.isMetric = isMetric } } What I’ve Tried Fully uninstalling and reinstalling the app on device and simulator. Resetting the simulator/device. Cleaning the Xcode build folder. Verifying the schema logs which correctly list both LocationPoint and AppSettings. Changing model names to avoid potential conflicts. Adding .modelContainer configuration with autosave enabled. Questions Is there a known bug or limitation with SwiftData concerning certain model setups or naming? Could this be related to how the data container initializes or migrates schemas? Are there recommended debugging or migration steps to resolve “no such table” SQLite errors with SwiftData? How can I safely reset or migrate the persistent store without corrupting the database? Any insights or suggestions would be greatly appreciated! Thank you!

Hi everyone, After updating to iOS 26 Developer Preview on my iPhone, I’m experiencing a repeated issue with certain third-party apps. ⸻ -Issue details: • The apps open as if freshly installed, showing the onboarding or login screen each time • User session is completely lost (no saved login or data) • Around 10 seconds after launch, the app automatically closes • It disappears from the app switcher (not just backgrounded) • This happens every time, with no crash message or error shown ⸻ -What I’ve tried: • Reinstalled the apps • Restarted the device • Toggled Face ID, Background App Refresh, etc. • Confirmed I’m running the latest iOS 26 Developer Preview build ➡️ Problem still occurs exactly the same way ⸻ -Feedback status: I submitted a report via Feedback Assistant with a screen recording and full reproduction steps. No response yet after several days. ⸻ -Looking for: • Confirmation from others with similar issues • Info on whether this is already being tracked by Apple • Whether it’s worth resubmitting a new Feedback report Thanks for any insight.

Hey there, Just writing here to say how I do enjoy the latest update, but I can’t seem to run it on my iPhone 14 Pro well because it tends to overheat. i can deal with the stuttering issues and app crashes, that’s understandable, but for some reason the hardware seem to really heat up after normal use (scrolling on social media platforms). oh also, I do think rolling back your phone‘s software should be a simpler process as well. It’s not impossible, but the demand of a computer in reinstating a previous backup when iCloud backups your device through WiFi seems like a missed opportunity. Okay. Thank you for reading.

I’ve encountered a consistent UI rendering issue in the macOS 26.0 (25A5295e) beta on my MacBook Pro 14-inch (2021) with Apple M1 Max, 64GB RAM. When opening System Settings > Keyboard > Japanese Input Method settings, the settings pane is visually clipped and scroll behavior is broken. The upper section (including checkboxes like “Windows-style key behavior”) becomes partially hidden. Although I can scroll momentarily to reveal the top, the view quickly snaps back, preventing any interaction with those upper settings. Steps to Reproduce: Open System Settings. Go to “Keyboard” and scroll down to Japanese input settings. Observe that the top section is cut off and cannot be interacted with. Attempting to resize the window or enable full-screen mode does not resolve the issue. Environment: Model: MacBook Pro 14" (2021) Chip: Apple M1 Max, 10-core CPU, 32-core GPU Memory: 64 GB Storage: 2 TB SSD Model ID: MacBookPro18,4 (A2442 / Z15H0013CJ/A) OS Version: macOS 26.0 Beta (25A5295e) Firmware: 13822.0.166.0.1 Additional Notes: Display scaling adjustments do not help. The issue affects both Japanese and English UI modes. This bug has been reported by other users on macOS 26.0 and iOS 26 beta as well, suggesting a regression in how SwiftUI handles view layout constraints in this pane. It would be appreciated if the UI could be fixed to allow proper access to all input method settings, possibly by enforcing proper scroll containment or minimum height for the pane. Thank you.

i am trying to build some projects please check out my project

Cannot Install Tahoe Beta 2 because Software Update Dialogue Box will not accept my Password (None in my case). Reports: "User interaction required" Recommendations?

In the actual development, I found that I could not complete the setting of my icloud+ customised email domain name SMTP. I tried to configure the SMTP of iCloud custom email according to Apple's document (https://support.apple.com/en-us/102525) but the error I looked through Apple's support file, but I didn't find the specific configuration of iCloud + customised email SMTP.

Hi All, I searched for this feedback but didn't see it, so apologies if this has been covered by another thread. Exploring the new camera app, It doesn't seem to recognize that external storage has been connected, so the additional features that allow ProRes high frame rates will throw an error dialog stating that "to use this you need external storage" even when external storage is connected. Using the Files app, the phone recognizes the storage, and this is something I can do with this external storage device on the previous version of IOS. It is clear that this release of the camera has been rewritten significantly since the last version. Is it possible that this is an oversight, a bug, or just functionality that has not been completed? Interested if anybody else is seeing this, or if it is just my setup.

I’d like to create a button on my iPhone Home Screen that changes settings if I am using an external lens mounted to my phone. This is what I have along with notes on what I hope to do. But it does not work. I am only able to open either the camera settings or the camera preserve settings but nothing will toggle macro controls. There is an additional step within the camera app as well but it can be skipped for brevity. Name: Telephoto and macro lenses Check if macro settings are already enabled or not. (Settings > Camera > Macro Control toggle) as well as (Settings > Camera > Preserve Settings > Macro Control toggle) Non-working shortcut code: Verification question: "Are you using an external lens?" If yes, Notification: "Turning on Macro Control and preserve settings for macro control." (Run below immediately) prefs:root=CAMERA&path=Turn%20On%20Macro_Control And prefs:root=CAMERA&path=CameraPreserveSettingsSwitch&path=Turn%20On%20Macro_Control If no, Notification: "Turning off Macro Control and Preserve Settings for macro control." (Run below immediately) prefs:root=CAMERA&path=Turn%20Off%20Macro_Control And prefs:root=CAMERA&path=CameraPreserveSettingsSwitch&path=Turn%20Off%20Macro_Control

Hi all, Im trying tu publish an app for iOS and I get it rejected by the lack of this privacy manifest, but unless I understood this wrong, this manifest is needed for external tools used, or maybe Im wrong, Im publishing an app made in Unity, so in this case, one has to include a privacy manifest by default? Sorry Im lost in all these terms, so I don't know if im asking something redundant, if you know how to fix this issue please tell me or direct me to the process because I haven't been able to identify the issue. Thanks a lot for any clue beforehand really

My app works perfectly the first time it is used but when returning to the start after playing the game and playing another it does some random things. I figure it is because the app still retains the previous game in it’s memory allocation? My question is, what is the best way programmatically to have an app start fresh and not have to quit it and open it again?

I am having trouble passing custom data in an array with a navigation stack. I want to display a subview with the same data structure (title, headline, picture placement etc), with different data attached for each of my list view items

Dear Apple Support Team, I am writing to request clarification regarding paid service eligibility for my iPhone 14 Pro outside its original country of purchase. Here are the details of my device: Model: iPhone 14 Pro Serial Number: J346337TKY Purchase Date: December 2022 Current Location: Astana, Kazakhstan Warranty Status: Expired I recently visited an Apple Authorized Service Provider in Kazakhstan, and I was informed that my device could not be accepted for repair due to regional restrictions, even on a paid basis. I would appreciate your assistance in confirming whether my device qualifies for paid repair service in Kazakhstan, or if it is strictly limited to service in its country of origin. If not eligible, could you please advise on the nearest country or region where I can receive authorized service? Looking forward to your guidance on the next steps. Best regards, Ruslan D

Connect the Zigbee color temperature light bridge to the Home app through the Matter Bridge (a device with a screen), and adjust the color temperature of the light on the screen. However, the color temperature of the corresponding device on the Home app is not synchronized, as shown in the following figure What information is missing from the Home app when my device reports color temperature during control?

I want to install tesseract in order to get OCR feature in ChatGPT. Tesseract install requires the use of HomeBrew on macOS But I am using macOS 15.5 and the version of HomeBrew is not compatible. When tying to install Tasseract, old version of HomeBrew is detected and HomeBrew starts updating automatically. The process goes fine until the download of the jpegsrc.v9d.tar.gz component. SHA256 mismatch is detected and the update process stops. But the downloaded jpegsrc.v9d.tar.gz doesn't seem to be corrupted. Maybe an error of the expected SHA256? Any help is welcome that would enable me to complete the HomeBrew update process. Many thanks in advance for your support. ------------------------------ This is what I get in Terminal: Error: Could not find an SDK that supports macOS 15.5. You may have have an outdated or incompatible CLT. Homebrew found the following SDKs in the CLT install: 10.14 10.15 Please update CLT or uninstall it if no updates are available. Error: Git must be installed and in your PATH! Warning: Sorry, Homebrew does not support your computer's CPU architecture! Warning: You are using macOS 15.5. We do not provide support for this pre-release version. You will encounter build failures with some formulae. Please create pull requests instead of asking for help on Homebrew's GitHub, Discourse, Twitter or IRC. You are responsible for resolving any issues you experience while you are running this pre-release version. ==> Downloading https://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz Already downloaded: /Users/bertrand/Library/Caches/Homebrew/downloads/ff08930ce8165de0173c4a8704a407636908779978246b3116202642460aca15--autoconf-2.69.tar.gz ==> Downloading https://ftp.gnu.org/gnu/autoconf-archive/autoconf-archive-2019.01.06.tar.xz Already downloaded: /Users/bertrand/Library/Caches/Homebrew/downloads/dca2c1298b729faa88ef51d6d6218fb82ed143da108475073e0c0a9bfae091c6--autoconf-archive-2019.01.06.tar.xz ==> Downloading https://ftp.gnu.org/gnu/automake/automake-1.16.2.tar.xz Already downloaded: /Users/bertrand/Library/Caches/Homebrew/downloads/de80077d29bb43dc673536d714b2345d6a9753a170151e730bccf02f102ecf57--automake-1.16.2.tar.xz ==> Downloading https://github.com/Homebrew/formula-patches/raw/e5fbd46a25e3566305929683356 Already downloaded: /Users/bertrand/Library/Caches/Homebrew/downloads/5a220d4e315a1ffbc9644d2bf91fe956c5a84a11689cbb8da50106ad3b71c48f--dynamic_lookup-11.patch ==> Downloading https://ftp.gnu.org/gnu/libtool/libtool-2.4.6.tar.xz Already downloaded: /Users/bertrand/Library/Caches/Homebrew/downloads/a7871392bebba3d24e9db265409485330a2e81ca638579ca84ff5bf9f9040666--libtool-2.4.6.tar.xz ==> Downloading https://pkgconfig.freedesktop.org/releases/pkg-config-0.29.2.tar.gz Already downloaded: /Users/bertrand/Library/Caches/Homebrew/downloads/5bdbf3b3fdadaf72744884b98b74a2ff887bd63a20b246f811a222a146ad7b64--pkg-config-0.29.2.tar.gz ==> Downloading https://sourceforge.net/p/giflib/bugs/_discuss/thread/4e811ad29b/c323/attac Already downloaded: /Users/bertrand/Library/Caches/Homebrew/downloads/96a5fa155b0ad1a98cc4d577b7806eedfadcde973df641a6e90cf257b08e3598--Makefile.patch ==> Downloading https://downloads.sourceforge.net/project/giflib/giflib-5.2.1.tar.gz Already downloaded: /Users/bertrand/Library/Caches/Homebrew/downloads/516725ea41ab2e3e2e554c736ec0ef0e0d7fcb52e597a831e2398422843276bd--giflib-5.2.1.tar.gz ==> Downloading https://www.ijg.org/files/jpegsrc.v9d.tar.gz Already downloaded: /Users/bertrand/Library/Caches/Homebrew/downloads/23faa446d5ad2c8f0a288f26af4c4f70666394f107eb58154ab432da5f6705d1--jpegsrc.v9d.tar.gz Error: SHA256 mismatch Expected: 99cb50e48a4556bc571dadd27931955ff458aae32f68c4d9c39d624693f69c32 Actual: 2303a6acfb6cc533e0e86e8a9d29f7e6079e118b9de3f96e07a71a11c082fa6a Archive: /Users/bertrand/Library/Caches/Homebrew/downloads/23faa446d5ad2c8f0a288f26af4c4f70666394f107eb58154ab432da5f6705d1--jpegsrc.v9d.tar.gz To retry an incomplete download, remove the file above.

Hi Everyone, I’m currently working on a flow where a web page redirects to our app to perform certain actions, and then returns the user back to the browser. However, on iOS, the only way to go back to the browser is by using the openURL method. The issue is that this method can only open the browser app itself—it can’t control which tab or page is shown, so the user doesn’t return to the original tab they came from. The same limitation also applies to Android. Furthermore, iOS doesn’t allow an app to programmatically return to the previous app (in this case, the browser). While Android doesn’t have an official way either, in some cases, the OS automatically returns to the previous app when ours is closed. I’d like to ask: Is there any known method or workaround that allows returning from my app back to Safari (or the default browser) and restoring the previously active web page or tab? Or, is there any way to programmatically return to the previous app from within my app? Thanks in advance for your support!

I have been working on telecommunication testing of ALE Softwar. Since no invite email received, I can’t unable to test in my IPhone. there is no options to add my test app. this that app url https://apps.apple.com/in/app/ale-softphone/id1588713865

Over the past few months, I’ve been experiencing persistent, abnormal behavior on my iPhone. Here's a short timeline: March 2025: Most apps log me out every time I close them. April 2025: Stored passwords suddenly begin failing across apps and websites. May–June 2025: Password recovery emails from Gmail accounts no longer arrive — suggesting that Gmail itself may be compromised or blocked/intercepted. Given the escalation, I ran several diagnostics and extracted system-level logs. Below is a structured summary of findings that point toward potential remote access, network traffic rerouting, and possibly hidden use of Bluetooth or debugging interfaces. ##1 Source: remotectl_dumpstate.txt Notable entries: com.apple.mobile.lockdown.remote.trusted and .untrusted com.apple.mobile.file_relay.shim.remote com.apple.webinspector.shim.remote com.apple.pcapd.shim.remote com.apple.bluetooth.BTPacketLogger.shim.remote com.apple.mobile.insecure_notification_proxy.remote This volume of .shim.remote and diagnostic services appears highly irregular for a non-debug, non-jailbroken device. 2. Skywalk Network Flows and Unusual Routing Source: skywalk.txt Dozens of flowswitch entries across interfaces like: ipsec0-7, pdp_ip0-2, en0-2, awdl0 Apps such as Gmail, ChatGPT, Preferences, and com.apple.WebKit are marked as defunct, yet persist in flow tables. Two specific daemons — replicatord and siriactionsd — appear on nearly every interface, in both QUIC and TCP6 traffic. skywalkctl flow-route shows multiple external IP paths, with flows routed through ipsec7, owned by kernel_task.0 — which could indicate system-level tunneling. 3. System Anomalies and Resource Behavior Inaccessible System Network Tools Source: get-network-info.txt All scutil calls fail (/usr/sbin/scutil does not exist). This blocks access to: DNS configuration (scutil --dns) Proxy and VPN status (scutil --proxy, --nc list) Reachability checks (scutil -r www.apple.com) Key Questions for the Developer Community Are >50 remote .shim.remote services typical on iOS 18.5 (release build)? Or does this suggest tampering, an MDM configuration, or debug provisioning? Could a misconfigured VPN or MDM profile enable persistent flow-switching across multiple interfaces (e.g., ipsec, pdp, awdl) and reroute app traffic such as Gmail? Is it possible for a test or developer certificate to silently side-load a background daemon, or trigger services like pcapd or file_relay, without showing in Profiles or Settings? Has anyone else seen the scutil binary missing or inaccessible on a stock iPhone? Could this be a sign of intentional lockdown or system modification? If anyone on iOS 18.5 / iPhone17,1 can share their remotectl_dumpstate output, I'd like to compare the service count and see if this behavior is reproducible. I’d appreciate any insight from those familiar with Apple’s system daemons, skywalk internals, or network service behavior. Happy to share sanitized logs or run additional diagnostics if needed. Thanks in advance. get-network-info.txt remotectl_dumpstate.txt assetsd.diskwrites_resource-2025-06-25-221428.json