I’ve developed an Apple Watch extension for an existing iOS app. When I run the app on the watch via Xcode using the simulator, everything works fine. However, when I try to install it on my iPhone, the Watch app doesn’t show it in the "Available Apps" list, so I can't install it on the watch. The Apple Watch is connected to my iPhone, and I can see other apps available for installation without any issues. I also created a brand new project with watchOS support to troubleshoot, but the same problem occurred. Any ideas on how to resolve this?

I’ve noticed a strange bug in Xcode 16 and Swift. When a preview is rendering and hasn’t finished yet and you run an app to debug, Xcode is launching two instances of the app. Has anyone else noticed this issue? If you let the preview finish rendering before running the app, this doesn’t happen. Very odd.

Hi, i have met error below when i tried to po one attributes of an instance in my Xcode lldb: error: type for self cannot be reconstructed: type for typename "$xxxxx" was not found (cached) error: Couldn't realize Swift AST type of self. Hint: using `v` to directly inspect variables and fields may still work. Is there anybody met the same error before? I urgently want to know why this happen and how to fix this issue. My macOS Version is Sequoia v15.0.1, Xcode16.0. This problem showed after i upgraded my macOS and Xcode version.

I have a major problem with team membership and Xcode. I work in a company, where my apple account was added to the development team with app manager role. I can see that on the apple portal, everything seems fine there. I have been also provided with the provisioning profile for the project and signing certificate of the company. However, when I log into Xcode the team does not show up anywhere. I am able to build the app, but cannot distribute to TestFlight (or anywhere else). When I use manual signing to choose the signing certificate it shows the "unknown team" message next to it. When I check my account in xcode it also only shows my personal team and does not allow to pick any other one (doesn't show any other one). When I click the "+" button on my xcode account to add a certificate an error pops up: "You already have active certificate or a pending request". I do have a pending request to enroll into apple developers program, but everyone says you don't need one if you are added to the team, you can just operate as a team member. Finally, when trying to upload to TestFlight, the following error is displayed: "No team for account ***" I have tried deleting and re-adding all the certificates. I have tried logging in and out of Xcode, I have tried deleting and re-adding my account in Xcode. I have tried reloading everything. My account was deleted and re-added to developers team. Nothing worked. I don't know the source of the issue, nor does my employer. I am new to ios development and this is my first project. Please help!

I am editing my iOS project in Xcode 16 and want to use the "Swift Compiler - Upcoming Features" section of the build settings to selectively enable the new Swift 6 language features. I have read the instructions for doing this and have dowloaded an Apple sample project and can see that section under the project and target-level Build Settings in the sample project However, when I open my Xcode project in XCode 16 that section does not appear. Is there any way for me to influence how Xcode 16 displays the build settings? In fact, no "Swift Compiler" sections appear at all under my project Build Settings (All | Combined). There is a "User-Defined" section that has the Swift Version, Compilation Mode and Optimization level. The project itself is several years old and was on a very old project version. I have upgraded my project document format to "Xcode 16" but it made no difference. I have compared my project and the sample project in a text editor and both seem to have similar structure. I tried removing unused and outdated settings from my project but that also had no effect. Is there an alternative to deleting my project file and adding the source files to it? I have a large project with multiple targets so that would be something I'd rather not do.

I'm unable to reset simulators using the menu or the xcrun simctl tool: <output of xcrun simctl list> == Devices == -- iOS 17.5 -- iPhone SE (3rd generation) (5A06623A-173D-4C96-8DD3-3E9FE39A06F1) (Shutdown) iPhone 15 (iOS 17.5) (F4329E8D-29BB-4EA7-8465-C11A98D04ED7) (Shutdown) -- iOS 18.0 -- iPhone SE (3rd generation) (2DDE8F03-F8E1-4C1B-8E28-CD9B208F3FFA) (Shutdown) iPhone 16 Pro (DE788688-8AC6-40A0-B25C-A56AA423798E) (Shutdown) iPhone 16 Pro Max (1405184C-36A9-40F3-B0D0-4EEB88452883) (Shutdown) iPhone 16 (0CBBA7DB-B20E-4F17-BBC5-910F1F6E1A0A) (Shutdown) iPhone 16 Plus (95421C27-11A0-4FCF-A889-DAAE8557B271) (Shutdown) == Device Pairs == ~/Library`` ❯ xcrun simctl erase 0CBBA7DB-B20E-4F17-BBC5-910F1F6E1A0A An error was encountered processing the command (domain=NSCocoaErrorDomain, code=513): “data” couldn’t be moved because you don’t have permission to access “Deleting-8FEDFF47-5B2F-4534-BCA2-036BBE68CE37”. You don’t have permission. To view or change permissions, select the item in the Finder and choose File > Get Info. Underlying error (domain=NSPOSIXErrorDomain, code=1): The operation couldn’t be completed. Operation not permitted Operation not permitted Xcode Version 16.0 (16A242d) MacOS 15.0.1 (24A348)

Xcode Version is 16.0 (16A242d), The Xcode prompts "Xcode will continue when the operation completes."for a long time, and never dismiss.

I updated Xcode and MacOS recently and haven't been able to compile my Flutter app on iOS devices/simulators since then. The error keeps changing every time I run it but here's one of the output in the terminal after running flutter run: Uncategorized (Xcode): Command SwiftGeneratePch emitted errors but did not return a nonzero exit code to indicate failure Error (Xcode): no such file or directory: '/Users/chiragbhansali/Library/Developer/Xcode/DerivedData/ModuleCache.noindex/Session.modulevalidation' Error (Xcode): stat cache file '/Users/chiragbhansali/Library/Developer/Xcode/DerivedData/SDKStatCaches.noindex/iphonesimulator18.0-22A3362- db63dc9361471f152f572502bdbfe70a.sdkstatcache' not found Error (Xcode): unable to rename temporary '/Users/chiragbhansali/Library/Developer/Xcode/DerivedData/ModuleCache.noindex/3F9VRK3CXAUUD/UIKit-1KHQ7M05IF VXC-56601391.pcm.tmp' to output file '/Users/chiragbhansali/Library/Developer/Xcode/DerivedData/ModuleCache.noindex/3F9VRK3CXAUUD/UIKit-1KHQ7M05IF VXC.pcm': 'No such file or directory' Error (Xcode): could not build module 'UIKit' /Users/chiragbhansali/Chirag/Coding/Projects/app/test/build/ios/Debug-iphonesimulator/Flutter.framewo rk/Headers/FlutterAppDelegate.h:7:8 Error (Xcode): could not build module 'Flutter' /Users/chiragbhansali/Chirag/Coding/Projects/app/test/ios/Runner/GeneratedPluginRegistrant.h:9:8 Error (Xcode): failed to emit precompiled header '/Users/chiragbhansali/Library/Developer/Xcode/DerivedData/Runner-eifcguceazlwumgsyzegclqdrbqt/Build/Intermed iates.noindex/PrecompiledHeaders/Runner-Bridging-Header-swift_PB6A5GFLTNPC-clang_3F9VRK3CXAUUD.pch' for bridging header '/Users/chiragbhansali/Chirag/Coding/Projects/app/test/ios/Runner/Runner-Bridging-Header.h' Uncategorized (Xcode): Command PrecompileSwiftBridgingHeader emitted errors but did not return a nonzero exit code to indicate failure Uncategorized (Xcode): Command SwiftEmitModule failed with a nonzero exit code Uncategorized (Xcode): Command SwiftCompile failed with a nonzero exit code Could not build the application for the simulator. Error launching application on iPhone 16 Pro. What I have tried so far: Deleting iOS SDK and simulators Cleaning Xcode build cache using cmd+shift+k Creating a new Flutter project and trying to compile it (it failed so that reduces the chances of it being a Flutter issue) Clearing the DerivedData folder Clearing settings and cache of simulators Restarting laptop Versions: Xcode: 16.0 iOS: 18.0 MacOS: 15.1 (didn't work with 15.0 either) Flutter: 3.24

I add the following info in the build settings of my app. Then I also add the icon to my asset. I build the app, it works normally, but I notice that when I changed the icon to 'AppIcon-Defaults', The icon change alert didn't appear. but it succeeds . I uploaded the archive to App Store I got: ITMS-90895: Missing Icon - The Info.plist key CFBundleIcons.CFBundleAlternateIcons contains an entry “AppIcon-Defaults” that references asset “AppIcon-Defaults.” No such asset is present in the asset catalog. Then I use xcrun --sdk iphoneos assetutil --info Assets.car to check the assets inside the archieved app, It have the asset.

We've encountered a critical issue with the new linker of CLT16 (version 16.1.0.0.1.1729049160) that prevents proper initialization of BLOCK DATA. BLOCK DATA are used to initialize global variables in our Fortran code, and its failure to initialize those variables leads to a program crash. This affects our community of more that thousand scientists worldwide. The current workaround is using the -ld_classic linker option. However, this option is deprecated and will be removed in a future release, as described in the Xcode release note. I've attached a minimal example that reproduces the problem using GNU gfortran with the following instructions (the attached main.f.txt and bd.f.txt need to be rename to main.f and bd.f, respectively): gfortran -c bd.f gfortran -c main.f ar rv libtest.a bd.o main.o gfortran -ld_classic -o good.x -L. libtest.a gfortran -o bad.x -L. libtest.a Running the two programs, one can see that the BLOCK DATA are not initialised without the option ld_classic, $ > ./good.x 3.7273802569289098 2.8083922366048202 $ > ./bad.x 0.0000000000000000 0.0000000000000000 We kindly request your attention to this matter and a prompt solution or alternative workaround. Best regards main.f.txt bd.f.txt part.txt

Anyone else notice that Xcode 16.1 seems to have stopped building universal binaries for both debug and release builds even though under "Build Settings-Build Active Architecture" both Debug and Release are set to NO. We had been using the universal binary builds out of Debug for preliminary tests on Intel based machines. The Architectures setting is set to: Standard Architectures (Apple Silicon, Intel) - $(ARCHS_STANDARD). I started a brand new empty app and it does the same thing. A workaround is to set the Destination in Xcode's menu bar to "Build on Any Mac" and then find the binary and drag it to the Intel computer. You can't run that one though from Xcode. Another workaround is to build an Archive and drag that one.

When renaming A.value, it also causes the value inside the conditional compilation in checkRename to be renamed. How to resolve or avoid this situation? class A { let value = "1" } class B { var value = 0 } func checkRename() { var b = B() #if os(iOS) b.value = 456 #elseif os(macOS) b.value = 789 #endif } Xcode Version 15.4 (15F31d).

Fails to gather code coverage and throws this error Showing All Messages Failed to merge raw profiles in directory /Users//Library/Developer/Xcode/DerivedData/Receiver-ekqrbpsaciuxmlfslviajhoecyat/Build/ProfileData/0B0C6B69-FD46-4801-B106-56B7FCD44370 to destination /Users//Library/Developer/Xcode/DerivedData/Receiver-ekqrbpsaciuxmlfslviajhoecyat/Build/ProfileData/0B0C6B69-FD46-4801-B106-56B7FCD44370/Coverage.profdata: Aggregation tool '/Users/shwethamugeraya/Downloads/Xcode 2.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/llvm-profdata' failed with exit code 1: warning: /Users/shwethamugeraya/Library/Developer/Xcode/DerivedData/Receiver-ekqrbpsaciuxmlfslviajhoecyat/Build/ProfileData/0B0C6B69-FD46-4801-B106-56B7FCD44370/2F4EFBF7-1CCF-4E9E-8FD6-482EEDB98B6C-34646.profraw: raw profile version mismatch: Profile uses raw profile format version = 4; expected version = 8 PLEASE update this tool to version in the raw profile, or regenerate raw profile with expected version. error: no profile can be merged

I'm running a macOS 15.2 guest on a macOS 15.1.1 host with UTM. I'm trying to install Xcode from within the App Store but cannot login to the App Store. When I enter credentials and click 'Sign In' I get the Error 'An unknown error occurred'.

Hi, I'm setting up Xcode and after updating MacOS to 15.2 and Xcode to 16.2, I cannot download the Predictive Code Completion Model. I've done some research and I haven't found any solution, specially since most people suggest that it randomly fixed itself, which for me hasn't been the case. I've tried restarting my Mac, uninstalling and reinstalling Xcode multiple times, I've also reinstalled MacOS from Recovery and haven't found any success (I'm also not running Xcode inside a VM, as I've seen this can cause some problems in this case). This is the error that I receive when I attempt to download the model: And here are the details: The operation couldn’t be completed. (IDELanguageModelKit.IDEModelDownloadAdapter.(unknown context at $11eba9a90).DownloadError error 3.) Domain: IDELanguageModelKit.IDEModelDownloadAdapter.(unknown context at $11eba9a90).DownloadError Code: 3 User Info: { DVTErrorCreationDateKey = "2024-12-26 23:09:25 +0000"; } -- There was an error processing the asset. Domain: IDELanguageModelKit.IDEModelDownloadAdapter.(unknown context at $11eba9a90).DownloadError Code: 3 -- System Information macOS Version 15.2 (Build 24C101) Xcode 16.2 (23507) (Build 16C5032a) Timestamp: 2024-12-26T17:09:25-06:00 For the record, I'm a new developer and I'm still learning, so thank you very much!

My app controls the cursor within its text area. Upon touching the screen the ios moves the cursor when dragging. The app cursor and the IOS cursor are now out of sync. Is there a way to set the app cursor to the IOS cursor? I have checked many sources to no avail. Thanks for your help. Charlie

All is fine in Xcode15, no LLDB errors whatsoever, but in Xcode16 I can't get any variable displayed in the console because of the following error: error: type for self cannot be reconstructed: type for typename "$......." was not found (cached) error: Couldn't realize Swift AST type of self. Hint: using `v` to directly inspect variables and fields may still work. I've checked the output of swift-healthcheck and there are several messages like this: SwiftASTContextForExpressions(module: "ROA", cu: "ROA+ViewLayer.swift")::LoadOneModule() -- Missing Swift module or Clang module found for "UIKit", "imported" via SwiftDWARFImporterDelegate. Hint: Register Swift modules with the linker using -add_ast_path. I added -add_ast_path to the OTHER_LDFLAGS in the faulty module's build settings but no luck. How can I debug my project in Xcode16?

My widget uses the @Environment(.isActivityFullscreen) variable. When running on ios 17, it will crash and report an error: dyld[55031]: Symbol not found: _$s7SwiftUI17EnvironmentValuesV9WidgetKitE20isActivityFullscreenSbvg Expected in: /Library/Developer/CoreSimulator/Volumes/iOS_21E213/Library/Developer/CoreSimulator/Profiles/Runtimes/iOS 17.4.simruntime/Contents/Resources/RuntimeRoot/System/Library/Frameworks/WidgetKit.framework/WidgetKit

I'm pulling my hair out here with this new Xcode 16, it complains that my app's dSYM is empty though it's clearly not, it's about 25MB. I'm working on a project using an internal static library, everything is built inhouse using swift, we own all the source code. It worked just fine until the other week, when I updated the Xcode, and now I can't debug anything. I keep getting "type for self cannot be reconstructed" when I run "po self.some_property". Why is that? The Debug information Format is set to DWARF with dSYM File for both the executable and lib projects. I've been a Unix guy since before I knew myself and I enjoy fixing things myself, down to bare metal, but man, this bug is driving me crazy. Is it even a bug?? It's the first time in more than 15 years since I started coding on Mac and iPhone when a bug has defeated me. I was always able to fix things using just the documentation and google, but the Apple toolchain is getting worse and worse nowadays. I remember the time when Apple made the complicated things simple, now they make the simple things complicated :( I just split the static lib from the main project one year ago, because of the ridiculously long build time. Should I merge back all the code in a single project? Something seems wrong to me. So I created this account to ask the masters. How can I get back my debug info (and sanity)? Using Xcode 15 is not an option because it doesn't run on Sequoia.

The operation couldn’t be completed. (IDELanguageModelKit.IDEModelDownloadAdapter.(unknown context at $123069a90).DownloadError error 3.) Domain: IDELanguageModelKit.IDEModelDownloadAdapter.(unknown context at $123069a90).DownloadError Code: 3 User Info: { DVTErrorCreationDateKey = "2025-01-31 01:58:50 +0000"; } There was an error processing the asset. Domain: IDELanguageModelKit.IDEModelDownloadAdapter.(unknown context at $123069a90).DownloadError Code: 3 System Information macOS Version 15.3 (Build 24D60) Xcode 16.2 (23507) (Build 16C5032a) Timestamp: 2025-01-31T09:58:50+08:00