I signed up for an Apple Developer Program last week. I paid the $99 fee for the account. However, the account still shows pending and the payment alert is still active on the dashboard. I checked my card statement and I do see that the $99 charge hit my account. I believe I paid for the developer account on the morning of the 18th, it's now the 22nd. Any suggestions?

Apple Developer Program Organization Enrollment — Processing for Over 2 Weeks, No Updates I submitted my Apple Developer Program enrollment as an organization on March 7, 2026. My enrollment ID is L9UY78P779. Setup details: Enrolled as Company/Organization (Delaware LLC) Valid DUNS number on file Apple ID has 2FA enabled Work email on a custom business domain The enrollment status has been stuck on "Your enrollment is being processed" for over two weeks now. I have not received any follow-up emails, requests for additional documentation, or any communication from Apple. I have also submitted a support request through the Apple Developer contact page with no response. This is blocking our ability to set up App Store Connect and begin the app review process. Could an Apple team member please review my enrollment and advise on what may be holding up the process? Happy to provide any additional documentation needed. Thank you.

I'm based in Australia, and am having the following issue. After leaving this message I received another response from someone else who is also havign the same issue, I've pasted that too. I'm quite surprised to not see it mentioned, could be local to language settings or something. Here is the issue: Folk, I am having an issue where Xcode 26.3 with the new iOS26.2+26.3.1 Simulator update installed doesn’t render Unicode characters in the Canvas or in Simulator. They do render when running direct to a device. I’ve reset devices inside Simulator, cleared Derived Data, cleaned Build Folders etc but to no avail! Is anyone else seeing this, I can’t find a mention anywhere!! Thank you in advance. Yep. Same here. Can't see emojis on the emoji picker keyboard.

Hi everyone, I’m hoping someone here has run into this before. I created an Apple Developer account and everything was working fine until Apple asked me to verify my work email address. The email is legitimate and matches my website domain. Apple did send me the verification email, and I received the code without any issue. However, when I entered the code, it repeatedly said the code was incorrect — even though I’m certain it was entered correctly. After a few attempts, I hit the limit and now see a message saying I’ve exceeded the maximum number of attempts (3). I contacted Apple Developer Support through the developer site about a week ago but haven’t received any response yet. At this point: I can log into my Apple ID normally with no issues I cannot proceed with enrolling in the Apple Developer Program I can’t pay the fee or complete setup because the email verification step is blocked It’s been over a week since the lockout, and I’m not sure how to reset the verification or trigger a new code. Has anyone experienced this before, or does anyone know how to get this resolved? Any help or guidance would be appreciated. Thanks!

Hello, I have a critical issue regarding the "Family Controls (Distribution)" entitlement. My app "FocusPact" was approved for the entitlement, but there is a technical mismatch in the Bundle IDs that prevents distribution via TestFlight. [Current Situation] Parent App ID: com.hayashikento.FocusPact (Approved / Capitalized) Approved Extension ID: com.hayashikento.focuspact.ShieldConfigurationExtension (Approved / Lowercase) [The Issue] Due to the case-sensitivity difference (FocusPact vs focuspact), Xcode throws a "Bundle identifier prefix mismatch" error. Since the parent app identifier is already established as capitalized, I cannot change it to lowercase without breaking the existing configuration. [Request] I have submitted a new entitlement request with the corrected capitalized Bundle ID: Corrected Extension ID: com.hayashikento.FocusPact.ShieldConfigurationExtension Could a DTS engineer please help me synchronize the approved status to this capitalized ID? This is purely a technical correction of an already authorized functionality. Team ID: UHG4J7F7NH App Apple ID: 67591326449 Thank you for your assistance. I am a student developer eager to start MVP testing as soon as this is resolved.

Hello, I have a critical issue regarding the "Family Controls (Distribution)" entitlement. My app "FocusPact" was approved for the entitlement, but there is a technical mismatch in the Bundle IDs that prevents distribution via TestFlight. [Current Situation] Parent App ID: com.hayashikento.FocusPact (Approved / Capitalized) Approved Extension ID: com.hayashikento.focuspact.ShieldConfigurationExtension (Approved / Lowercase) [The Issue] Due to the case-sensitivity difference (FocusPact vs focuspact), Xcode throws a "Bundle identifier prefix mismatch" error. Since the parent app identifier is already established as capitalized, I cannot change it to lowercase without breaking the existing configuration. [Request] I have submitted a new entitlement request with the corrected capitalized Bundle ID: Corrected Extension ID: com.hayashikento.FocusPact.ShieldConfigurationExtension Could a DTS engineer please help me synchronize the approved status to this capitalized ID? This is purely a technical correction of an already authorized functionality. Team ID: UHG4J7F7NH App Apple ID: 67591326449 Thank you for your assistance. I am a student developer eager to start MVP testing as soon as this is resolved.

Hello, I am facing a critical issue where the Family Controls (Distribution) entitlement is not being applied to my app extensions, despite the main app ID being approved. Main App ID: com.hayashikento.focuspact (Approved on March 13) Extension ID 1: com.hayashikento.focuspact.ShieldActionExtension (Pending/Not visible) Extension ID 2: com.hayashikento.focuspact.ShieldConfigurationExtension (Pending/Not visible) I have submitted requests multiple times, but the entitlement does not appear in the "Capability Requests" for these extensions in the Certificates, Identifiers & Profiles portal. Furthermore, I am unable to contact Developer Support because the "Contact Us" form on the developer website consistently shows a "Request error" or freezes on the submission page. Since I am completely blocked from TestFlight distribution, could someone from Apple please look into my account (Team ID: UHG4J7F7NH) and manually sync these entitlements? Thank you for your help.

Just installed the new Xcode 26.4 RC build (17E192) after happily using 26.3 for a few months. I'm noticing some immediate regressions in the Intelligence features: Frequent losing of OAuth token (Claude Agent). This had previously been fixed and now is back. Agent "Thinking" is constrained to thought bubble windows, which are (a) too small to read, (b) not scrollable when thinking goes beyond a few paragraphs. Yes they are tappable when thinking is finished, but this doesn't help. Due to (2), in deep thinking, it's impossible to follow progress beyond the visible window, so impossible to know if the agent is going off the rails. I'm noticing just more general slowness to complete tasks. Not just complete them -- it seems like it takes longer to START tasks, which is really weird. It sits there thinking for longer. Same project, same model as before. Every time you tap "New Chat" it presents both Claude and Codex choices, even if you're only signed into one. This turned a simple single tap into now a required two taps. Overall this feels like a frustrating setback after a very positive user experience in 26.3.

There seems to be a problem to a specific Apple Developer Account regarding Xcode Cloud Distribution (Signing). The Xcode Cloud Error Invalid Signature. Code failed to satisfy specified code requirement(s). The file at path “XcodeCloudTest.app/XcodeCloudTest” is not properly signed. Make sure you have signed your application with a distribution certificate, not an ad hoc certificate or a development certificate. Verify that the code signing settings in Xcode are correct at the target level (which override any values at the project level). Additionally, make sure the bundle you are uploading was built using a Release target in Xcode, not a Simulator target. If you are certain your code signing settings are correct, choose “Clean All” in Xcode, delete the “build” directory in the Finder, and rebuild your release target. For more information, please consult https://developer.apple.com/support/code-signing. Investigation Apple Developer Forums This issue seems to be known: https://developer.apple.com/forums/thread/746210 Debugging by ourselves We setup an example Xcode project from a default iOS Xcode app template to rule out any project issues. This example project failed with the same error as stated above. In the next step we tried the same example project with a different Apple Developer Account and it successfully distributed the example App through Xcode Cloud. Conclusion It seems like there is no setup issue on developer-side, because our example project works out-of-the-box on a different Apple Developer Account. Our only hope is that Apple will have a look on our Developer Account. Maybe there is some internal setting.

Since 26.4 beta 3 I've been having errors after a few hours of using Claude Agent. I get an error stating that I am not authed. If I go into Xcode settings, it still shows I am signed into Claude Agent. I have click sign out and then go through the whole auth process again to start using the agent again. This is on two separate computers. Is there anything I can do to stop this behaviour and stay logged in for longer? It worked fine in 26.3.

This just started happening today out of nowhere. Instead of only the project I’m working on appearing in Source Control, every project inside my Xcode projects folder is now showing up in the Source Control navigator. This is happening in both the Changes and Repositories tabs.

When I go to the leadership section, I have 8 currently active leaderboards. When I select "manage scores and players" I see 9 leaderboards, from which 5 are legacy and my 4 new ones are not listed (also it comes in a very old design). New players will score in the 4 new leaderboards but I need to remove the top score which was the developer score, to give them a chance, but the new leaderboards are not accessible.

Im a Quality Engineer and using Appium to automate in Physical devices so installed appium server and xcuitest. We need to build the webdriveragent project from xcode , when doing that getting the following error "Your team has no devices from which to generate a provisioning profile. Connect a device to use or manually add device IDs in Certificates, Identifiers & Profiles. https://developer.apple.com/account/" I have a apple account licensed but still unable to resolve this, any immediate help is highly appreciated

I have the following setup: UIViewRepresentable with a UIView holding UIScrollView ImageView PKCanvasView this is in order to make it appear as if you are writing on a paper which you can zoom and scroll. The UIImageView is holding the paper image. The problem is if you draw some pen strokes at zoom level 1, then zoom in (say zoom level 2) as soon as you place down the pen, the PKCanvasView starts flickering repeatedly very badly. A sample video is here: https://youtube.com/shorts/5zeq6EDheSM a small sample project showing this is here: https://www.icloud.com/iclouddrive/0a0NSLP4bsism69L7jRtZPIhQ#BugDemo

I've purchased the apple developer program a few days ago. It's still pending. I called support but they just advised to send emails. Case ID: 102848926959 Please fix it.

I have three rogue iOS simulators, how to correctly delete them and reclaim the disk space? These img files are costing me 18gb of storage.

Hello, I am writing this post because the Apple Developer Program enrollment process is clearly malfunctioning, and I have reached a point where this situation is unacceptable. First payment I initially purchased the Apple Developer Program on December 3rd, 2025 at 16:03 (Turkey time). The payment was fully completed, confirmed by my bank, and I received the official Apple Store receipt. • Order ID: W1557478965 • Amount: 1029 TRY • Status: Completed / Posted Despite this, my account continued to show: • “Purchase your membership” • Enrollment status: Pending • No access to App Store Connect After several days with no response from Apple Support and no activation, I assumed something had gone wrong on Apple’s side. Second payment Because I was completely blocked and received no reply from support or the forums, I made a second payment to rule out any payment failure. • Order ID: W1694587309 • Amount: 1029 TRY • Status: Completed / Posted Current situation At this point: • Two separate payments • Two unique Apple Store order IDs • Zero activation • Zero response from Apple Support • Enrollment still Pending • App Store Connect still inaccessible Support case details: • Apple Support Case ID: 102769533427 • Multiple follow-ups sent • No reply • No action taken This is no longer a delay — this is a system-level failure. I have paid twice for a single Developer Program membership and received nothing in return: no activation, no explanation, and no support. I am formally requesting manual intervention by Apple staff to: 1. Immediately activate my Apple Developer Program membership 2. Investigate and resolve the duplicate payment (refund or clarification) 3. Explain why a paid enrollment can remain blocked with no support response If this forum is monitored by Apple employees, this issue requires urgent escalation. This situation should not happen in a paid developer program. Thank you.

I’m blocked debugging a watchOS app on a physical Apple Watch. The iPhone connects to Xcode normally (wired), but the Watch either fails to connect with a tunnel timeout or disappears entirely from Xcode after I unpaired it inside Devices & Simulators. Environment Mac: macOS 26.x (Apple Silicon Mac) Xcode: 26.2 iPhone: iOS 26.1 Apple Watch Ultra: watchOS 26.2 (build 23S303) Connection: iPhone connected to Mac via USB (trusted). Watch paired to iPhone and working normally in the Watch app. Issue A (when Watch is visible in Xcode) In Xcode → Window → Devices and Simulators, the Watch shows up but is not usable and fails to connect. Error: “Previous preparation error: A connection to this device could not be established.” “Timed out while attempting to establish tunnel using negotiated network parameters.” In some attempts the Watch shows “Capacity: Unknown” / limited details, and then fails during preparation. Issue B (after unpairing Watch in Xcode only) I unpaired/removed the Watch in Xcode (Devices & Simulators). I did not unpair the Watch from the iPhone. Now: iPhone appears in Xcode and works normally for builds. Watch is still paired to the iPhone and works normally. Watch no longer appears anywhere in Xcode Devices & Simulators (no paired watch section, no watch run destination). What I’ve tried Reboots of Mac, iPhone, Watch (multiple times) Watch unlocked, awake; iPhone unlocked and close to Watch Verified Watch is paired and connected in iPhone Watch app Developer Mode enabled on iPhone and Watch Wi-Fi and Bluetooth ON (Mac/iPhone/Watch), tried toggling both Tried on home Wi-Fi and also with iPhone hotspot (same result) Resetting trust prompts / reconnecting iPhone via USB, re-trusting Mac Apple Watch: “Clear Trusted Computers” Xcode: removing/re-adding devices; clearing derived data; restarting Xcode Watch Developer networking test: Responsiveness = Medium (430 RPM) Questions 1. Is this a known issue/regression with Xcode 26.2 + watchOS 26.2 tunneling (CoreDevice / devicectl)? 2. Is there an Apple-supported way to force Xcode to re-discover a paired Watch after it was removed from Xcode Devices & Simulators (without unpairing the Watch from the iPhone)? 3. Any recommended logs or diagnostic steps I should collect (Console logs, sysdiagnose, specific Xcode/CoreDevice logs) to include in a Feedback report? If helpful, I can provide the full error text from Xcode’s Devices window and any logs you recommend. Thank you in advance,

I would like to have the option to keep my xcode project open regardless of closing all tabs using cmd + w.

Hello, it's been 3 weeks now since I started the process of migrating my individual profile to a company profile. However, I still haven't received any information, and despite contacting support multiple times, I haven't received a response. When I log into my profile, all I see is: "We’re processing your membership migration from an individual to an organization. Please note that your membership benefits are temporarily disabled during this time."