Hey, I am using the terminal a lot. Since I updated to Sonoma (so, really a long time ago). My prompt or more precise the hostname always changes between three states. Sometimes it is username@Macbook-Pro-of-XXX, sometimes username@MacbookPro and sometimes it's username@xxxxxxxx-yyyy-zzzz-aaaa-bbbbbbbbbbbb. The latter is probably my UUID. Does anyone have a clue why this randomly changes?

When I go to the leadership section, I have 8 currently active leaderboards. When I select "manage scores and players" I see 9 leaderboards, from which 5 are legacy and my 4 new ones are not listed (also it comes in a very old design). New players will score in the 4 new leaderboards but I need to remove the top score which was the developer score, to give them a chance, but the new leaderboards are not accessible.

I have Xcode on my mac. I am iOS Dev. I do not know what version of Xcode was before I did next steps, but I could say that I had iOS Simulator 18.3.1. So I update my Xcode to Version 16.3 (16E140). At this version is available iOS Simulator 18.4. But from some time before Xcode separate downloading components and actual Xcode itself. So i make update and do not download latest iOS simulator. What i have: in Xcode -> Settings -> Components under " Other Installed Platforms" i have iOS 18.3.1 and 17.5 in Choose Destination dropdown menu i have nothing. And Xcode say me that i need install iOS Simulator. After some time with ChatGPT I could not do nothing from this. I try go to : Window -> Device and Simulators and here create new simulator with 18.3.1 and make it appear Always. But it didn't help. Solution I did: I download latest version 18.4 because i could not wait because i need fix bug only 1 hour shift and it was this hour so i fast download the simulator. After downloading 18.4 in Choose Destination dropdown it appears all versions of simulaors and 18.3.1 and that i created and 17.5 Question: Does Xcode force to install latest version of iOS simulator? What is the sense of this upgrade that now Xcode is updating faster because it download 8 GB not 16 if eventually I need download 8 GB again ? The new what i could do download Xcode in the evening and Simulator in the morning?

I am encountering an issue where the application running on a physical device does not reflect the most recent source changes. Observed behavior On the device, the application behaves as if an older binary is running. Specifically: Newly added debug UI labels do not appear. The logs still show old debug prints instead of new ones. Steps taken to ensure a clean install: Changed the bundle identifier Set a new display name (the app still showed the old display name when I click run). Deleted the app manually from the device before every reinstall. Build and install steps Performed multiple clean builds with a fresh Derived Data path. Built from terminal using xcodebuild (Debug configuration, physical device target, automatic provisioning). Installed using: xcrun devicectl device install app Verified: The updated source files are listed under Compile Sources and compiled from the expected path. The bundled Info.plist includes the new bundle identifier and display name. Installation output confirms new bundle identifier. Question What could cause a newly built and installed application to run with behavior from an older binary? Are there recommended ways to verify that the device is actually launching the latest installed build, and to ensure stale binaries are not being executed? Any guidance on additional diagnostics or misconfigurations to check would be appreciated.

I have an issue when i use external tester with a public link and emails. Test fly is well installed but when i have to open the app, it just charge as seen in the screen.

Hello Apple team, I am using xctrace to record an Allocations trace on iOS. For example: xctrace record --template "Allocations" --launch com.example.myapp --time-limit 30s --output alloc.trace After recording, I can export the results in Allocations List format (flat list of allocations) using: xcrun xctrace export --input ./alloc.trace --xpath '/trace-toc/run/tracks/track[@name="Allocations"]/details/detail[@name="Allocations List"]' --output ./alloc.xml This works fine and produces an XML output. However, what I really need is to export the data in Call Tree format (as shown in Instruments GUI). I checked xctrace export --help, but it seems that the Allocations template only supports the List view for export, not the Call Tree breakdown. My question is: 👉 Is there a way to export an Allocations trace in XML with Call Tree details using xctrace? 👉 If not, is there an API or recommended workflow to automate this instead of exporting manually from Instruments GUI? Thanks in advance for your help!

It seems as though using any initializer of SubscriptionOfferView or StoreView will create a memory leak. This can be simply reproduced by adding this to your SwiftUI view: SubscriptionOfferView(groupID: "yourgroupID", visibleRelationship: .all, useAppIcon: true) or StoreView(ids: ["monthly", "yearly"]) Tested on iOS 26 beta 2

Hi, This maybe somewhat confusing, but please bear with me. I currently have an app in the App Store that supports iOS and tvOS. But the tvOS version was a separate app during the development process. I'd like to combine the iOS and tvOS app into one project so its easier to handle and keep track of internally. Can I upload the new Apple TV version to the same place where the current one is, or would I have to delete the current Apple TV version before uploading the newly combined version? I hope I made that clear enough :-) Thank you, Dan Uff

I am developing a simple watch app and I use my personal watch for development with Xcode. Personal watch is series 10 gps only. I have two other watches that I want to use for testing the app, but not needing them to be connected to Xcode. The test watches have cellular option, and I need a cell plan per watch because the watches need to be standalone, not counting initial setup. To get the standalone cell plan the watches need to be configured using AWFK. Here is what I have tried/current issues. I switch between all three watches on my phone using the watch app. Originally tried to put test watches in developer mode, thinking I would connect to Xcode, developer mode is not available when watch is setup using AWFK. Pushed the watch app to apple connect, setup TestFlight group, added the test users and my phone user, accepted invites TestFlight is installed on my phone, I see the testflight setup for the watch app I set a test watch using watch app on the phone, run install for the test app from TestFlight on the phone, spinner moves for awhile then goes back to Install. I am not able to get the watch app installed on the test watches from the phone. Is what I am attempting to do supported? I haven't found much specific documentation on this. If I pair the test watches as regular watches, set them to developer mode, can I pair them again as AWFK and will developer mode survive the switch? Or is there something really simple that I'm overlooking? Appreciate any help that can be extended.

Hello, I am experiencing an authentication issue when submitting my Expo iOS app to App Store Connect using the Expo EAS CLI from the terminal. The exact flow is as follows: I run the submit command in the terminal. I am prompted to enter my Apple ID. After entering the Apple ID, I am prompted to enter my Apple ID password. After the password is accepted, I am prompted to enter a 6-digit verification code. I receive the 6-digit code immediately via SMS or phone call. I enter the code correctly and immediately, but the CLI always returns “Invalid code.” This happens every time. Important notes: The Apple ID and password are correct. The 6-digit code is entered immediately and exactly as received. Logging in to App Store Connect via a web browser with the same Apple ID, password, and SMS code works without any issue. The problem only occurs when authenticating through the terminal using Expo EAS CLI. Could you please advise why the verification code is being rejected in the CLI and how I can successfully authenticate and submit my app?

Hi everyone, I’m developing a cross-platform mobile app (React Native) but I don’t currently own a Mac. What is the most reliable and professional way to: Build the iOS version Test it properly (real device / TestFlight) Upload it to the App Store Are cloud Mac services (like MacinCloud, AWS Mac, etc.) considered stable for production release workflows? Is there any fully supported workflow without direct access to a physical Mac? Would appreciate real-world experience from developers who faced the same situation. Thanks in advance.

I want to build an ios .xcframework (for external delivery) and .framework(for internal debugging) in order to package some code to a customer for incorporation into their app. My framework has a dependency upon RealmSwift, which I've added using SPM. There is a warning saying Module RealmSwift was not compiled with library evolution support. And when building SwiftVerifyEmittedModuleInterface fails with an error saying "missing required modules: 'Realm.Private', 'Realm', 'Realm.Swift'" By default, Build Libraries For Distribution was set to YES, however if I turn it off then the warning and error go away and I can cleanly build the framework. I've been attempting to get a good understanding of this flag and if it should be used or not, most material says yes but doesn't go a good job of explaining why. However anyway I can't get the framework to build with RealmSwift as a dependency without turning off this flag. Therefore is that ok to proceed down that route? Does the fact the xcframework will only ever be distributed to one consumer affect decisions (i.e. binary compatibility etc.) Thanks

what is the diff between INST_ALL and Instructions(FIXED_INSTRUCTIONS)? also CORE_ACTIVE_CYCLE VS Cycles(FIXED_CYCLES)

I'm working on a custom instrument that displays intervals from os_signpost data. I'd like to color the intervals in the graph based on data from an accompanying aggregate. For example, color the interval red if its duration is greater than 3 standard deviations from the mean. Is this possible?

Our business is to scan the code to open App Clip, but then App Clip will appear in App Library and Siri Suggestions. This can be opened quickly, but the URL of the last scan will be included. This will cause a problem, for example: if the previous scan was code A, but the user does not scan code B when going to place B and directly opens it through App Library or Siri Suggestions, the code I get is still code A, so the result I want is that I want to know where it was opened from, and then if it is opened quickly, I will clear the URL and remind the user to scan the code again. Or if it is opened by quick opening, do not include the URL

I've got a 2019 Intel iMac running Sequoia 15.4.1 and Xcode 16.3. Every time I try to view a storyboard Xcode locks up and beachballs on me. It takes minutes to load the file. When I force-quit Xcode, the report that shows up has this as the reason: Processes reached dispatch thread soft limit (64): launchd_sim [96305] [unique pid 194673], launchd_sim [96260] [unique pid 194628] Deadlock: AppleSpell [1494] thread 0x1df0c4 DispatchQueue 313 -> AppleSpell [1494] thread 0x1df0c4 DispatchQueue 313 Deadlock: AppleSpell [1494] thread 0x1df114 DispatchQueue 86 -> AppleSpell [1494] thread 0x1df114 DispatchQueue 86 Blocked by Deadlock: 1 task - AppleSpell [1494] I'm wondering, why is AppleSpell trying to spell-check a plist file? Is there any way to tell AppleSpell to ignore a file?

Xcode16.2 加 iOS18 以上的系统加载图片 http 类型的 url 时， http 链接会自动升级为 https，请问有处理方案吗？浏览器报错信息如下：This content was automatically upgraded and should be served over HTTPS.

在将游戏从 Nintendo Switch 移植到 Mac 的过程中使用 .NET （NativeAOT） 有哪些限制和注意事项（尽管两者都是 ARM）？

Hi, in XCode and iOS app. Tried to add Icon, got image size errors. reuploaded with correct sizes and started getting this error. Tried all the solutions from forums, didn't work. Restarted Mac Deleted Assets.xcassets and recreated with AppIcon and AccemntColor Copied "Assets.xcassets" from new dummy Project to main one. I don't have info.plist file Could you please help. Thanks, Bhanu

Im getting this specific error 'Apple 403 detected - Access forbidden' when trying to build my app, my previous 10 builds all succesfully work but now it keeps on giving this error. I'm guessing its because of a new agreement email I recieved. But when i got to both developer website and app store connect there is no new agreements to accept. I'm quite stuck. Any help appreciated. Thanks